D-Link DAP-1522 :: Comparability With 3D Material?

Aug 8, 2011

Will the dap-1522 work with 3d video ie; from a 3d Blue Ray Player? I am upgrading system to an LED Samsung 3D TV and Samsung 3d Blue Ray Player. I know that HDMI 1.4 cables will work but am looking at the wireless option.

View 1 Replies


ADVERTISEMENT

Cisco AAA/Identity/Nac :: Recommend Good Reference Material To Configure ACS 5.x

May 7, 2012

I am new to Cisco ACS, any good reference book and useful links to configure ACS 5.x

View 4 Replies View Related

D-Link DAP-1522 Not Connecting

Mar 10, 2013

My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.

View 6 Replies View Related

D-Link DAP-1522 - Unable To Log On After Network Changes

Sep 30, 2011

I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).

View 5 Replies View Related

D-Link DAP-1522 :: Not Connecting To DIR-815 Properly?

Apr 26, 2011

My problem is two-fold:

1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.

2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.

I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)

Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.

View 4 Replies View Related

D-Link DAP-1522 :: Can't Bridge PC Or Printer

Mar 12, 2012

I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it.  I have the 1522 set to Bridge Mode via the switch on the unit.  The 1522 has hardware version B1 and Firmware version 2.000.  I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network.  I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.

Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK

View 3 Replies View Related

D-Link DAP-1522 :: Can't Update Firmware To 1.31

Dec 7, 2011

I have dap-1522 version A Browser IE8 with lestest updates.

I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.

I try three different way to download it, could the file be bad on dlinks web site?

View 4 Replies View Related

D-Link DAP-1522 :: Incompatible With Almost All New Pioneer AVR's?

Aug 27, 2010

I have just discovered after three weeks of testing that DAP-1522 wireless bridges are not compatible with all the new Pioneer AVR's that support internet radio and Iphone control.  Anytime a DAP-1522 is powered on and on the same subnet mask as a Pioneer receiver it will cause the Pioneer to loose it's connection every 30 minutes.  The receiver is then not able to connect unless it is powered off and on again. The DAP-1522 will cause this even if the Pioneer is hardwired to a router and nothing is plugged into the DAP-1522.  This affects all new models of Pioneer receivers including the Elite line like I have.

I have tested this with 3 differnet Pioneer receivers and 2 DAP-1522's and always got the same results no matter what the settings were and with the 1522 in AP or bridge mode.  Other Pioneer receiver owners experiencing constant disconnect problems on another forum have now also confirmed they have DAP-1522's.....and they are also pissed after spending countless hours troubleshooting.

I talked to Dlink support today and they will not admit to a problem so I can't wait to contact Pioneer tech support on Monday to let them know I have found the reason they are seeing returns on their new receivers (some cost as much as $7K) since many of the new owners like myself are exchanging them thinking they got a bad one.  I'm sure Pioneer will test this immediately and force a Dlink fix or turn it over to the FCC.At this point I just wish I could get my money back since I have also already confirmed that a netgear bridge works just fine.  Come to think of it, I know Dlink has a new refund policy, but I will check with my state district attorney to see if they can legally keep my money even if the product doesn't work. I don't see anything on the outside of the box with this policy so therfore I wasn't given fair warning of the policy before purchase and would not be expected to know it since it is not industry standard.  Let the games begin.

View 14 Replies View Related

D-Link DAP-1522 :: Won't Accept New Firmware

Mar 14, 2012

I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version :   1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.

View 11 Replies View Related

D-Link DAP-1522 :: How To Get Ip From Dwl 2100Ap Not By Livebox

Jan 20, 2011

I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I  Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.

LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2

View 2 Replies View Related

D-Link DAP-1522 :: No Internet Access With It

Nov 29, 2010

I have a DIR-655 router with a DAP-1522 connected in bridge mode.  The firmware on the router is 1.21 and the firmware on the bridge is 1.21.  I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption.  When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655.  On the status page of the DAP-1522, wireless radio is enabled and status is connected.  I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.

I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection.  On the XBOX 360 I cannot connect my live account.  On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out.  Same occurs when attempting to access the internet on the DirecTV DVR receiver.

View 14 Replies View Related

D-Link DAP-1522 :: Unable To Access It

May 25, 2012

More that a year ago, with guidance from D-Link Customer Service, I performed setup on a system consisting of a DSL-2640B (with wireless disabled) and a DAP-1522 as an access point. I included the 1522 so as to have an N network, since the 2640 is G. The system works fine and I'm able to stream via the 1522 to an N 300 USB Adapter. Internet access is fine, and I'm able to access the 2640 with no problem.I want to add another 300 in a different location. To do that, I'll need to access the 1522 from my Windows 7 computer, since I've lost the passphrase that I'll need for the 300.Everything that I've read tells me to connect the 1522 directly to my computer via cable and to temporarily change the network adapter settinge to:

IP = 192.168.0.x         various sources list values of 2 and 99 for x
Subnet mask = 255.255.255.0
Gateway = 192.168.0.50

Then to use a browser window to go to 192.168.0.50 Regardless of the settings that I use, the browser (IE9) always indicates that it can't connect with that address. accessing the 1522, or on any alternative way to obtain the passphrase.

View 3 Replies View Related

D-Link DAP-1522 :: DIR 655 Quit Working

Feb 14, 2012

My DIR 655 router quit working and so I called D link.  She had me reset the ip to 192.168.5.x.  So now my dap1522 is not connecting to the 655.  I connected the dap1522 to my laptop via ether-net and typed in dink, and got nothing, then put in default ip for the 1522 and still nothing. I also tried ip scanner and it would not come up.

View 1 Replies View Related

D-Link DAP-1522 :: Administration Web Of Switch Is Not Available

Jan 10, 2012

my config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :

- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?

- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?

View 7 Replies View Related

D-Link DAP-1522 :: Unable To Login With Default IP?

Jan 5, 2012

 changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..

View 8 Replies View Related

D-Link DAP-1522 :: How To Enable 5Ghz Band

Oct 13, 2011

I installed my 1522 today with a Direct TV receiver and made a connection using AP mode.

How do I know what band is being used and how to switch between the bads.

View 1 Replies View Related

D-Link DAP-1522 :: DNS Server Not Shown In Static IP

Mar 16, 2012

Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.

View 4 Replies View Related

D-Link DAP-1522 :: Do Devices Talk Directly

Apr 14, 2013

Do the devices connected to the DAP-1522 communicate directly with each other or do they communicate through the router.My DAP-1522 is set up as a bridge connected to my DIR-825.  The reason I ask is I've set up an HTPC connected to the DAP-1522 and I also have media devices connected to the DAP and am wondering if they'll communicate with each other directly or if they have do it by going to the router and back.  That way I can use my HTPC to serve media to my devices at local speeds.

View 1 Replies View Related

D-Link DAP-1522 :: Simultaneous Bridge And AP Function

Oct 26, 2011

I already have a DIR-855 and was considering using a DAP-1522 in conjunction to bridge my 5GHz N to my living room to feed HD media to my PVR box and also feed wired-only clients like my TV and BR player. But, in my new flat I find that the walls are pretty thick and my wifi signal is dropping off pretty quick, so  I was wondering if you can configure the DAP-1522 to simultaneously be a wifi bridge to feed my media clients, and an AP to feed any laptops that might be in use in the living room?

View 1 Replies View Related

D-Link DAP-1522 :: Can't Log In To Change Network Password

Dec 29, 2011

Had to reset out DIR-655 router. This ended up changing our network password. Unfortunately, my DAP-1522 was not informed of this change and it will not connect to my Directv receiver now. I attempted to log into the bridge to change the password and it will not let me in. I attempted to reset the DAP in hopes that I would just be able to start over from scratch, but no dice (Assuming that I did it correctly)

View 4 Replies View Related

D-Link DAP-1522 :: Bridge Mode In Next House

Apr 13, 2011

I m setup for my brother's next house. He wants to use to share with my internet access. I do have 2wire modem provider that has wireless capability in my house. So he have DAP-1522 [bridge mode] and adjust in Wireless Setting, to use SSID manual, (Bell9**) WPA. It s successful, and works well. Problem is cannot use wired to computers, blu-ray, Xbox 360 in same time. it will disconnect frequently because in bridge mode doesn't have DHCP reserved?

My bro bought other one is DIR-655.  DAP-1522 keep in [bridge mode] to link to DIR-655 (Static IP), and setup DHCP Reserved.  He feel relief that works very well and have no problem with any computers and devices doesn't disconnect anymore. my question is why DAP-1522 doesn't have DHCP reserved when bridge mode that connected to any providers modem?

View 1 Replies View Related

D-Link DAP-1522 :: AP MODE Doesn't Work?

Jan 6, 2011

I have a DSL router Pirelli PDF A1000G.I have a Linksys e3000 and I have a dap-1522.When I bought a dap-1522 I thought it could do access point in fact i saw many videos in dlinktv before choosing an access point from DIY with mike etc to youtube there are 2 videos one showing bridged mode and another ap mode!Now what happens is this I have upgraded from firmware 1.11 that came as default to 1.21 i connect it wired to my linksys e3000 when it is connected with the ethernet cable wired I can connect to the internet and navigate and open sites and my ps3 can connect to it but my range is not very good only 40%!

Now I bring it downstairs remove the ethernet cable and connect it to the power and then you can connect to it but since it isn't connected to my router which is upstairs i can't access websites neither can I play on my ps3!I don't know does only ap mode works when it is connected to the router wired because what happens is if you don't put ethernet cables in the back of the dap-1522 and just connect it to power then here doewnstairs you can connect to the dap-1522 my signal is like 87% but while I'm connected with my laptop I can't access websites and in the ps3 I can't connect!

and choose  access points there are (4) listed: dap-1522, dap-1160, dap-1353 and dap-2553, I thought of buying dap-1522 because it could support abgn while 1160 only supports g and 1353 only supports n to repeat to signal here downstairs and be a good access point!

View 3 Replies View Related

D-Link DAP-1522 :: Will Not Connect To A Hidden SSID

Jul 31, 2012

After a firmware update the DAP-1522 HWversion A will not connect to a Hide SSID.

I am Using the DAP-1522 as a Bridge in 5Gz.

View 6 Replies View Related

D-Link DAP-1522 :: Bridge Mode - Cannot Ping DIR-615

Nov 23, 2010

I am running a DAP-1522 (v1.21) in Bridge mode with a DIR-615 (1.00VG).  I have configured the DAP-1522 to access the WiFi network and can see it connects correctly.  I have a PC connected to the DAP-1522.  Most of the time I can ping the DAP-1522 from the PC but cannot ping the DIR-615.  Occasionally when I reboot everything again I can ping the DIR-615 and get full internet access but this usually only lasts  a minute or so then it drops.  After that I can only ping the DAP-1522.  The DAP-1522 always says the Status is "connected" though.

The IP addresses are as follows:
DIR-615: 192.168.0.1
DAP-1522: 192.168.0.50 (static)
PC: 192.168.0.55 (static)

View 9 Replies View Related

D-Link DAP-1522 :: Using As A Bridge With WNDR3700 Router?

May 20, 2011

I've been playing with this setup for over a month with no real success.  I'm trying to use the DAP-1522 as a wireless bridge to provide connectivity to my entertainment center which consist of a PS3, Directv DVR and Internet ready TV.  I tried the setup as described in the manual, but not getting to the internet.  Initially I was able to connect the 1522 as a bridge, but the connection kept dropping, especially anytime I actually used the internet (downloading a VOD movie).  While troubleshooting the dropping issue, I changed all the 1522 settings and now it cannot access the internet at all through.  The WNDR3700 is routing my home network fine...it is setup on the 192.168.1.x address space.  I understand the 1522 came setup for 192.168.0.x, is the 192.168.1.x/192.168.0.x thing jacking things up?  I initially had the 1522 setup with the 192.168.1.x IP from my home network and the gateway set to my WNDR3700 (192.168.1.1)...should it be on the 192.168.0.x?  I have updated the firmware to 1.31. 

View 2 Replies View Related

D-Link DAP-1522 :: AP Mode - Not Connecting At N Speeds

May 18, 2011

I've got the DAP-1522 connected in AP mode. Multiple N speed laptops but they're limiting out to G speeds (54 mbps). Firmware 1.31. Current config is

Wireless Mode :    Access Point   
802.11 Band :    2.4GHz
802.11 Mode :    n and g

[Code].....

Connecting with brand new windows 7 laptops. N Capable. Some G laptops on the network as well.

View 2 Replies View Related

D-Link DAP-1522 :: DHCP Requests Thorough DAP Units?

Dec 7, 2011

I am trying out a DAP-1513 unit but there is no forum section for this? My question seems to be general and might cover the other models also.  Do the DHCP request, from the attached LAN devices on the DAP, get pass to the DHCP "server?"  

View 6 Replies View Related

D-Link DAP-1522 :: Nothing Showing In Wireless Setting?

Mar 23, 2011

I got a DAP-1522 and here is my situation. I have a wireless router connected to the internet downstairs. I want to extend the range by creating a new wireless network upstairs. So I want the DAP-1522 to connect to the wireless router, and then become another access point upstairs.

I was able to connect to the wireless router in the DAP-1522 setup wizard, but nowhere was I able to configure that actual DAP-1522 WIRELESS setup. Nothing ever showed up on the "Wireless Settings". Just "Save Settings" "Do Not Save Settings" and the rest of the screen empty. On the status page it does show it is connected.

Am I doing something wrong or will the DAP-1522 not do this?

View 1 Replies View Related

D-Link DAP-1522 :: Does WoL Work If PC Is Behind Wireless Bridge

Jan 28, 2010

I want to send a WoL (wake on lan) packet to power up a PC which is wired to DAP-1522.  The DAP-1522 is connected to my DIR-655 router wirelessly.  So far, I have no luck.  Do you know if the DAP-1522 is capable of passing the WoL?  Does it need a firmware upgrade before it can do so? 

View 7 Replies View Related

D-Link DAP-1522 :: What Is 5GHz Antenna Orientation

Nov 22, 2008

What is the 5GHz antenna orientation in the DAP-1522? If I want to get the best signal for streaming to a DSM-750 how should I orient the the DAP-1522? Horizontal? Vertical? and which edge towards the media player?

It's working but the access point only reports about 50% signal strength over 20 feet (and only 1 wall) so I would have expected better. I've tried turning the box a couple of different ways but didn't see any big difference in the reported signal strength.

View 2 Replies View Related

D-Link DAP-1522 :: WPA Not Working With Android Device?

Dec 4, 2011

I am unable to connect and Android device (HTC Desire, Samsung Nexus S etc) wirelessly to the DAP-1522. I've search through the forums and can't find anyone else having issues with Android so I think it must be one of my settings. It works fine if I switch to WEP however I don't want to use the weaker hackable protocol. Any way to have the DAP-1522 in WPA working with an android device?

View 4 Replies View Related

D-Link DAP-1522 :: Dropping Connection When Using N-mode

Sep 19, 2009

I have just upgraded my network to the 802.11n standard, or at least am trying to do that. Im using a DIR-615 as Access Point and a DAP-1522 as bridge to cover the entire area.After having some trouble figuring out how to set up and connect the devices, i figure out that it might some other problem than my setup of the devices (The symptom was that the connection was ok, but then it seemed to be dropped, even though the DAP-1522 still displayed connected in the status page).

After reading what I could find about the DIR-615 and DAP-1522 in this forum and on the internet, I found a suggestion about changing the Wireless Mode from 802.11b/g/n to 802.11b/g, and after doing that everything works fine, its just not an upgrade anymore.I have fixed the channel to 10, just to check that it wasnt  noise from other equipment. The symptoms are very reproducable, trying to connect wiin n-mode and bridge only works for 30-60 secs. Switching back to b/G mode and all is fine.

View 14 Replies View Related

D-Link DAP-1522 :: DIR 655 - Blinking Power Light

Dec 9, 2009

I successfully linked a DIR-655 (A4, FW:1.21) via WPS.

I then updated the DAP-1522 to FW:1.21 from 1.1.

Things looked great. I then moved it upstairs to my home theater.

Plugged it in and got a blinking power light. Completely unresponsive to either linkage or 192.168.0.50.

I have followed everyone advice listed either here or in Amazons reviews. And from my own experience with similar electronics the flashing power LED is indicative of a "brick".

I have initiated a replacement shipment from amazon. Just wanted to see if anyone had seen this before.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved