Using Android phone and have to set up Port Forwarding to access the cameras. I have to change the IP Address to a static one instead of the one issued by the Router. How do I change the IP Address of the camera to one outside the DHCP range?
View 14 RepliesHow can I change the camera name form the default which is the same as the model name
View 1 Replies View RelatedI would like to share my live video from my dcs-930L camera but don't want to give out my password that would allow people to change settings..
View 3 Replies View RelatedI just brought this D-Link DCS-930L. I insert the disc and follow the instruction and select the option of without WPS and follow the step of connecting the lan cable and power point but at Step 2, after the green light, it keep prompting me that it can't find the camera. it connected to the router where there is a lan cable connected to my pc.
View 1 Replies View Relatedi installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure
View 1 Replies View RelatedI have the DCS-930L set up at home with motion detection emails. I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?
View 6 Replies View RelatedI think I did everything per the manual, but I cannot access my camera over the internet thru [URL] website. It says that I have to check if I have enough bandwidth, or checked if my camera is not blocked by my router But I have a Dlink DIR 655 router where I have configured the Virtual server (port 80) as it is explain in the manual I also have a DHCP reservation that works fine (I can access the camera within my network) What should I do more now to finally access my camera from internet (this is for me the interest of havinf a network camera!)
View 14 Replies View RelatedIs there a way to reset the camera remotely, via the browser interface or a FTP connection? I can't find a "reset camera" button on the web interface...unless I've overlooked it.
View 3 Replies View RelatedI have setup all the port forwarding etc. and am able to watch the camera from outside. Problem is it takes me to the web setup page. This creates problems if I want to give the URL to someone else. Is there anyway just to get the picture on an otherwise blank html page?
View 4 Replies View RelatedI cannot get the camera to connect to our wifi via WPA2-PSK:AES, which is what it runs. The network /SSID is visible in the setup, but it won't connect and get an ip. I see no error messages or any kind of information at all in the admin web page.I've upgraded to firmware 1.05
View 2 Replies View RelatedIf i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software
View 1 Replies View RelatedOr, does the data only go over the WAN connection when the camera is accessed via myDlink? I ask because I have this camera installed in my mountain home and the WAN connection is a 5GB/month Verizon USB modem. It seems to be chewing up a LOT of data.
View 2 Replies View RelatedI have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router okay, that worked. But I move 2 rooms over and I no longer connect.
Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.
At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.
LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. Camera not detected anymore on my network. I've try switching on and off, problem still there.
View 4 Replies View RelatedI'd had my camera offline for the last couple of months, and in the interim I've upgraded both my main pc and the wireless router. I'm running Windows 7 Ultimate 64-bit on the pc, and the router is a netgear gigabit dual band wired/wireless. When running through the camera setup I am not able to get setup to find the camera, whether wired or wireless. I know that the camera's online as it shows in the routers device table, and I'm able to access the camera with my browser. However, the failed setup prevents my registering the camera on MyDlink. Any thoughts? Should I be looking at the ports on the router in regard to the camera's IP?My goal is to be able to remotely monitor my home, which the MyDlink service seemed to offer. Based on what I've read, it appears there are other ways to achieve my goal, but I would like to figure out the install problem.
View 1 Replies View RelatedCan the camera support multiple destinations simultaneously?
In testing set-up for ftp and email, while observing results in a browser on the Mac, and also MyDlink app on an iPad, I observe that a few jpegs get sent to email, a few to ftp, and MyDlink keeps "timing out". My Mac is wired gigabit ethernet to the router, and the wireless LAN is 802.11n.
Maybe it can't handle multiple destinations?
Does MyDlink cause continued transmissions at the video frame rate set in the setup panel, even if no one is connected to look.
I installed my camera a week ago and have since noticed every 15 minutes (only while the camera is plugged in) or so I would lose my internet connection. A message comes up at the bottom of my screen that says 'local area connection. A network cable is unplugged'. It takes 15-20 seconds for the connection to be re-established.
I called my ISP and asked if there were any settings on my router I needed to change since the camera install but they told me 'no' and I should contact tech support for the camera.
My camera uses Lots of data without anyone viewing the camera.I have it connected to a mobile data limited subscription with 2Gb of transfer each month. When traffic goes over it will limit bandwidth to 64 kbit/s.
After I connected the camera my data usage rise very high and just in a day or two the 2Gb limit was reached.The speed was then decreased to 64 kbit/s. And the next 3 weeks until my limit was reset the total data usage was up to 4Gb.That means that in 3 weeks 2Gb data was sent from the camera in only 64 kbit/s.How could this be?I have motion detection on that will email me images, that gives me some false positives some days with sun and shadows. But that should add up to a few Mb as maximum for a month.
I also have remote power on/off on this specific camera. I have now turned it off and the sent data from my modem has stopped.WHERE does the D-link camera stream live to? It's password protected and no one except me has the password.I can't see open sessions in my router (Dovado 4GR) and my mobile broadband supplier (Telenor) can not see where the data is transferred.But the camera is sending data somewhere, WHY? and how can I turn that off?
I'm having trouble with one of my DCS-930L cameras. I have successfully installed it and it's connected wirelessly to a Dovado router. However, after some 2 weeks the wireless connection drops and I can't connect to the camera anymore. As the camera is 350 km away I can't restart it. This happens everytime and the last time I was around the camera and indeed the camera LED was green. I restarted it by pulling the powercord and after that the camera worked for som 2-3 weeks and then the same problem again.I have 4 cameras, and it's always the same one that drops the connection and the router is only some 5 meters away from the camera. No walls between the router and the camera. I have the ability to restart the router with an sms, but that doesn't make the camera reconnect.
View 2 Replies View Relatedway for one to view a camera stream without a username and pass? We are upgrading from older dlink cameras, I don't have the model handy. Previously we could just use the applet and it would display, I copied the applet from the new one but it requires a login to view.
View 1 Replies View RelatedI'd like to have an outside view. Have any of you tried setting up one of these cameras outside? Not fully exposed, say under an eve or carport? Are they sensitive to humidity and/or temperature?
View 4 Replies View RelatedI'm trying to programatically access the MJPG stream from my DCS-930L camera from outside of the DLINK software. Any correct URL for MJPG? Is there any way to view the website contents from this camera so I can hunt this down, or any technical documentation on it?
View 1 Replies View RelatedI would like my dcs-930l ip camera to be directly connected to my d-link dsl-321b modem (which has only one rj45 port to connect to), so that I can either access the cam via the internet (watching livestream through webinterface, that would be option 1) or so that the cam sends an email with a picture as soon as the motion sensors activate - that would be option 2 (by the way: the modem / cam get internet access through german telekom / t-online).
I have tried to get option 1 as well as option 2 to work, but I failed... I would be happy if either option 1 or 2 would work for me - I don't really care which one. In both cases, the problem seems to be that the dcs-930l cam cannot access the internet (but the cam itself works - I can view the livestream through the local network).
I'm trying to connect the D-Link 930L Wireless N Camera to my E4200 router. When I have the camera connected via the Ethernet cable it works fine, as soon as I unplug the Ethernet cable it will not connect wirelessly. I tested the camera on a friends router E3000 and the camera connects fine and work flawlessly on his network wirelessly. Any settings in the router that need to changed or set differently?? All of my other devices work great. I have been through D-Links Tech support all things point back to my router.
View 6 Replies View RelatedI would like the ability to change the default password. Currently, when I change the default password and save the config via the web interface, neither the original password, or the new password work. I am forced to reset the device to the default config to regain access to the device.
DCS-930L firmware 1.04 and Mac OSX 10.5.8
how do i change existing server ip address to a different range,,what changes do i have to make?
View 3 Replies View RelatedI'm trying to re-setup this EOL camera on a new router.I've been able to reset the cam to factory defaults and see it wired using dhcp. I then was able to change the address to a static address, still wired and still can see it with IE. However when I disconnect the rj-45 cable, power down and restart, I can't access the cam.
View 2 Replies View RelatedA small network and uses the Linksys Router BEFSR81 as dhcp.the default Number of addresses is 50 and starts 10.0.0.100 to 10.0.0.149.A new Cisco IP Phone just introduced requires ip addresses and have noticed running out of addreses.Can I increase the number to 120 so that the address range would start from 10.0.0.100 to 10.0.0.219, also, I have a VPN device which automatically configures itself for 10.0.0.199 address and this is /24 network configuration.
View 1 Replies View RelatedI keep getting some additional IP addresses logging onto my home network that have an address outside what should be allowed by the router. The server is running at 192.168.2.1 and is set to only allow clients from 192.168.2.2 - 192.168.2.10 so a total of 9 clients should be allowed on.The problem is that something keeps logging in with an address of 192.168.169.2 or 3 etc. Sometimes more than one device at a time.I have assumed that it is some automated or virtual client as I'm pretty certain my network has not been breached. I have a 9 character password with a relatively random alphanumeric combination, although I haven't tried changing the password (I live in a share house with with a bunch of devices using wireless, so I haven't yet bothered). What I don't understand is how it has connected with the xx.xx.169.xx range at all. I have a Belkin 'Share' Wireless N Modem Router and at some stage there was a 'guest' network but that has since been disabled and I still am seeing the extra address. I have attached a screen shot of the DHCP client list on the router.The following is a list of devices that may be on the network at times, I'm thinking one of these may be responsible for the problem:
Windows Vista Desktop - Only LAN device
PS3
Macbook
Epson wireless printer
Android HTC Desire Mobile Phone
Laptops running various Windows versions (XP, Vista and 7)
A few thoughts I had:
- the android phone is capable of running a wireless hotspot, may have to look into it to see if if has been operating as an access point into the Belkin router, but assumed this wouldn't bring up clients connected to the phone on the home router.
- The desktop has PS3 Media server installed to stream video to the PS3 over the network (not that I have ever managed to get it to work), however this is not ever open on the desktop.
we have a 3560 switch configured with EIGRP with dhcp. We have a user that we cannot ping, however the interface show up / up and no errors on interface. the ip address is 10.2.0.199 - however we have dhcp configured to exclude the range from dhcp ip dhcp excluded-address 10.22.0.1 10.22.0.200 how can this work station get a dhcp address if we have that ip range excluded from the dhcp pool?
The user is off a different switch that is a uplink to this distribution switch. Traceroutes shows that the problem is with the distribution switch.
The laptop can connect to the internet using the wifi card. However, it cannot connect to the internet when using the wired connection but it can be pinged from other machines at work. The NIC does not pick up a different IP address even after releasing and renewing the IP address through cmd. I have uninstalled and reinstalled the NIC. The NIC is working because when I set a static IP address the machine can connect to the net. Using DHCP it goes back to that same IP address. I have tried a winsock repair as well with no go, as well as taking the machine off the domain and re-joining it. Is there something I can do on my end to get a different IP address through DHCP or do I have to get a Network engineer involved? This is a machine on a corporate LAN?
View 15 Replies View RelatedE4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
I have a device(internet radio) that seems to require an address format of 192.168.xxx.xxx. The router does not do this range and I cannot set it to that range ( the first three xxx). If I try the router defaults back to 192.168.x.xxx. Any way to over come this so I can connect the radio (which works fine wired as the ISP can supply a 192.168.xxx.xxx IP address).
View 6 Replies View Related