D-Link DCS-942L :: Cameras Time Keeps Resetting?

Mar 23, 2012

On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.

View 6 Replies


ADVERTISEMENT

D-Link DCS-942L :: 942L - Gaps In Continuous Recording

Mar 10, 2012

I have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.

Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.

View 4 Replies View Related

D-Link DCS-942L :: Can't Run 942L Without Power Cord

Aug 5, 2012

I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?

View 5 Replies View Related

D-Link DCS-942L :: Searching Support Website Getting No Link

Jan 30, 2012

I have 1.00 build 0522 and searching the support website I see no link.  But reading here I see there is a later version.

View 1 Replies View Related

D-Link D-ViewCam :: DCS-930 / 932 - Add IP Cameras To Mydlink App On Android

Jan 16, 2013

i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add  IP cameras to the mydlink app on Android, iPad, and web?

View 1 Replies View Related

D-Link DCS-930L :: Access Cameras Through D-View Cam?

Feb 15, 2012

I can access my cameras through the Dlink web site (mydlink), but cannot access all of them through D-View Cam o n my desktop. I do a camera search and it only finds two of them and the third one it doesn't see. I tried to insert it manually and it still doesn't see it. It sees it fine in mydlink.

I've uninstalled the D-View Cam program and re-installed it, with the same results.

View 3 Replies View Related

D-Link D-ViewCam :: DCS3411 Which DNR / NVR Will Be Able To Support All Cameras And How

Jun 20, 2012

I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.

View 1 Replies View Related

D-Link D-ViewCam :: Unable To Connect Two 930L Cameras?

Jul 22, 2011

I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.

View 2 Replies View Related

D-Link DCS-930L :: Router Doesn't See Cameras Anymore

Feb 19, 2012

Just replaced my SMC Gateway with a Cisco Home Networking Modem, router doesn't see DCS 930 cameras.  Working perfect before.  I start the wizard, I plug in camera power, plug in ethernet cable for setup, light is green as requested, searches for camera,  comes up "No Cameras found".  Called ISP provider to reset modem, still no go.  Tried a wireless setup using the "buttons", no go. Reset cameras..

View 9 Replies View Related

D-Link D-ViewCam :: 3.2 Remote Live Viewer Not Showing All Cameras?

Oct 7, 2011

i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.

View 2 Replies View Related

D-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)

Jul 10, 2012

I have (2) 942-L, and (1) 5222-L on one network.  port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80.  no matter if all 3 are connected to dViewCam, only two will work at a time.  Disconnect any third, and they work fine.  reconnect 3rd, and one disconnects intermittently.  On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine.  I know, I know, but I like DViewCam, because it's the only thing running the PC computer. 

View 3 Replies View Related

D-Link DCS Network Camera :: DCS-5300 Cameras Will Randomly Reboot

Jun 20, 2011

Have several DCS-5300 cameras (firmware 1.06) and randomly the cameras will reboot.

D-Link says to set to factory default, but that is not physically possible.

View 1 Replies View Related

D-Link D-ViewCam :: DCS-930L Cameras Missing Or Corrupted Files

Nov 17, 2010

I just purchased two DCS-930L cameras.  They are both installed and running fine over wireless.  I can view them via a web browser, however, I cannot get D-ViewCam to work.  I installed the latest version (3.1.1).  As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457".  I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work.  I also have User Account Control (UAC) turned off. 

View 7 Replies View Related

D-Link DCS Network Camera :: 2121 - Have 2 Cameras Which Randomly Delete Old Recordings

Jul 16, 2012

2x DCS-2121 camera.They both record to the same wireless hard disc via my router (airport extreme, with external HD attached. )but when both cameras are on at the same time, they seems to interfere with each other,and regularly delete (all) older recordings of both cameras. (apparently as they "think" the HD is full)

This does NOT happen when only one camera is on.I even tried to record at the lowest possible quality as not to take up too much bandwidth,but problem remains.

View 11 Replies View Related

D-Link D-ViewCam :: Older Cameras Like DCS 2100 / 3220 Not Fully Supported

Feb 17, 2010

Downloaded DVIEWCam 3.0. Are there any plans on supporting older Dlink Cameras like the DCS-2100 etc ...?  Even my DCS-3220 is not fully supported, however the 3420 worked in the config menu.

View 3 Replies View Related

D-Link DCS-942L :: Does Not Work With MAC

Nov 10, 2012

The company has a glitch that they are not sure if they will fix so you can't record with mac.  I am unable to return my cameras to staples and Im out the money for the memory cards I opened.  It says you can record with MAC clearly on the box!!!!  Bad business practice for STAPLES and DLINK.

View 3 Replies View Related

D-Link DIR-825 :: Wireless Signal Drops From Time To Time?

Jan 10, 2012

AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.

View 3 Replies View Related

D-Link DIR-655 :: Wireless Network Gets Slow Time To Time

Sep 1, 2011

i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:

Hardware Version: A4 - Firmware Version: 1.32EU

View 5 Replies View Related

D-Link DCS-942L :: Monitoring App For Blackberry?

Jul 9, 2012

iphone and android app but no blackberry.

View 3 Replies View Related

D-Link DCS-942L :: Cannot Get Camera To Work On PC

Jan 4, 2013

I just purchased 2 cameras and have one set up.
Firmware V 1.12

Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config

View 8 Replies View Related

D-Link DCS-942L :: How To See Who Is Watching My Camera

Mar 27, 2013

Is there such a possibility in the firmware or through telnet?

View 3 Replies View Related

D-Link DCS-942L :: How To Manage Cam Using A Web Browser

Apr 13, 2012

As DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.

[url]....

View 3 Replies View Related

D-Link DCS-942L :: How To Switch Profiles

Dec 18, 2012

I just bought new 942L (HW Rev3, 1.12 FW) and the only profile which is used to stream to iPhone or Web browser in mydlink is profile 3 which is limited to JPEG. Is there some way how to change the profile to be used for streams or is there a way how to make to profile 3 something else then JPEG?

View 1 Replies View Related

D-link Dcs-942l :: Keeps Going Offline Wifi?

Apr 19, 2012

I have 3 DCS cameras on my network all setup WiFi

2 are DCS-932L and 1 DCS-942L

The DCS942 (which is right near but facing the other direction) is about 2 meters away from one of the 932's but the 942 keeps going offline - it comes back on and off probably 4-5 time during a 24hr period.

This is most frustrating - it would look like Wifi signal strength could be the issue but the other 932 right near it doesn't have this issue?

View 1 Replies View Related

D-Link DCS-942L :: Unable To Reset It

Jun 24, 2012

I initially set it up for static IP, which was a mistake for reasons I probably don't need to go into here.  Having recognized my mistake, I've been trying to hard reset it so I can convince it to acquire its IP address by DHCP, but each time I reset it and return to the "First, select your camera" screen in the setup wizard, I'm faced with a single choice: the device as I first set it up for static IP.  I don't seem to be able to convince it to give up that erroneous static IP address.I have read the FAQ section on hard reset.  I've held down the reset button for a lot longer than 6 seconds while the cam was connected to power and ethernet, and I've watched it go through the sequence of flashing blue reset and WPS lights until it settles down, but this doesn't change the situation, evidently.

View 7 Replies View Related

D-Link DCS-942L :: Almost Always In Night Mode

Dec 24, 2012

My DCS-942L is almost always in night mode with IR on resulting in a B/W picture. Only when the light is very bright it changes to day mode. How to adjust the day/night threshold?

View 11 Replies View Related

D-Link DCS-942L :: Can't Connect To The Rtsp

May 5, 2013

I'm trying to connect to the camera DCS-942L  through the Rtsp Protocol.

Link do this : [URL]

But the video signal no. Tried different players. Players determine the model of the camera , but no image and after a couple of minutes is open. What I'm not doing all right?" My link has the correct view ?

View 3 Replies View Related

D-Link DCS-942L :: How To Mount In Window

Dec 13, 2011

Any replacement bracket or some other way to easily mount the 942l in a window? i have a long window next to my front door i want to just stick this someone about shoulder high in that window looking right to the door so will see anyone who comes.

View 5 Replies View Related

D-Link DCS-942L :: NTP Not Functioning Properly

Jan 27, 2013

My Dlink DCS-942Ls had been updated to the latest firmware both 1.12.1608WW and 1.12.1628EU. (I grouped them into two firmware devices). They are all H/W version A1, agent version 2.0.15-b11.  If I setup time to automatic time configuration and sync with NTP servers ( all from drop down list and Thailand NTP server time1.nimt.or.th) , they did not work and I must set time manually every times I power off and on these IP cameras.  I knew that this issues has been raised for long times and still exist in the current firmware.Simple way to eliminate this problem is specifying NTP server into IP number.  ping your national NTP server URL and then get the IP address , e.g. time1.nimt.or.th has IP 203.185.69.60 , or ntp1.dlink.com has IP 61.67.210.241.  I have tested many ways and the results can be comfirmed that  URL NTP letter cannot sync time but IP number can do.   I also has a DAP-1360 Repeater mode and test with its "System Check" ping test,  the result are success either URL NTP server name and IP number.  NTP protocol is different to ping test. I'm not sure that which parties (ISP, DNS, Router, IP camera device)  should fix this error.    I decided to specify NTP server with IP number to all network devices from D-Link.  Minor risk may occur if a national NTP server change its IP number.

View 1 Replies View Related

D-Link DCM-201 Requires Frequent Resetting

Mar 21, 2011

I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.

View 7 Replies View Related

ADSL D-Link 2640U Not Resetting

Dec 19, 2011

I have a wireless ADSL, D-Link 2640U. I was doing some configuration on it and immediately the control panel disappeared. I am trying to log in it is refusing. I have try to reset, it is not resetting. Network is working, but no internet because I have not yet configured it for the internet. When i use it's cd, it reaches to the point of detecting it and telling me that "The router is off or a cable is not connected" Though it is on and the cable is fine i have tested it in different routers it works well!

View 1 Replies View Related

D-Link DIR-601 :: How To Get WEP Code Back Without Resetting

Apr 5, 2011

I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?

View 1 Replies View Related

D-Link DCS-942L :: Getting Error 324 On Firmware Update

Sep 2, 2012

I get this error when I update to 1.12. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved