D-Link DIR-600 :: Wireless Connection Of Two Wired Networks?

Feb 17, 2012

I have two separate wired networks. Network 1 has a wireless router (an adsl modem). Router of the Network 2 is not wireless. Can I replace router of network 2 with DIR-600 to make a wireless connection between these two network segments ?

View 5 Replies


ADVERTISEMENT

Wireless Link Between Wired Networks

Sep 6, 2011

I have a Sky broadband router downstairs which has wired and wireless links to workstations downstairs. I have a wired network upstairs in my study. I want to put a router into the study that will link wirelessly to the Sky router downstairs and link the wired workstations to the broadband.

View 1 Replies View Related

D-Link DIR-655 :: Slow Wired Connection - Wireless Ok

Aug 19, 2012

I originally installed my DIR-655 as a wireless access point, not using the wired ports at all, and it worked fine like this. Trouble with my trying to set up my Bell router/modem with port forwarding prompted me to change my configuration so my Bell router /modem is now only a modem, and I am using the DIR-655 as a wired as well as wireless router. I have a separate network server and so don't use the DHCP on the DIR-655, and I only use one port to connect to a separate gigabit switch that serves the network.

I am finding that the wireless connection works really well with the few wireless devices I have connected (mainly an apple tv, and a MAC book) but my wired connections to the internet "feel" slow, sometimes with a significant delay before links to sites are established. I click a link, and wait for several seconds before the site shows up in the browser; sometimes after that the same site seems to respond at normal speeds, other times there are added delays.

Is there something in the DIR-655 settings that would cause this? The wireless connections seem fine.

Should I be looking at a new router/modem (rather than separate boxes)? If so what would be the equivalent D-Link model?

View 5 Replies View Related

D-Link DIR-300 Very Often Loses Connection On Wired And Wireless Connections

Nov 25, 2011

My D-Link DIR-300 very often loses connection on wired and wireless connections. It stops connecting to Internet randomly i.e. any URL typed in from the browser times out.I connect various devices such as desktop, laptop, ipad2 over wired and wireless connections and the behavior is the same from all devices when this problem occurs. If I make a direct connection to the DLS modem, it works fine for the whole day, without these issues.I also observed IP address conflict messages and my desktop does not connect to Internet if I am running VPN on my laptop, at the same time, occasionally.When this occurs, I am able to login to the router and can see the WAN status and the DHCP address being allocated to the router. I can even do DHCP release and renew, but that does not fix the problem.

View 3 Replies View Related

Broadband :: Century Link DSL Wireless Connection Much Slower Than Wired?

Sep 7, 2012

I have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.

View 3 Replies View Related

D-Link DIR-615 :: Router Won't Transmit Wireless When Local Wired Connection Is In Use

Aug 9, 2012

the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.

View 3 Replies View Related

D-Link DIR-600 :: Connection Lost After Inactivity In Wireless / Wired Mode

Jan 18, 2012

I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.

View 1 Replies View Related

D-Link DIR-825 :: Constantly Dropping Internet Connection - 3 Macs / 2 Wireless / 1 Wired

Feb 16, 2011

I setup a D-Link DIR-825, VB1, Firmware V2.00NA about a month ago. We have 3 Macs here at home - 1 brand new iMac, a G4 Powerbook, and an old G4 / 933 Tower. The G4 tower is connected via ethernet. The other two through Wi-Fi. My problem is that I can barely use the internet for even a few minutes on the G4 tower, connected via Ethernet, without losing my connection. I can be in the middle of loading a page or an image, and suddenly it will say "Waiting for xxx.com". Then if I try to go to Google.com or something I will invariably get "Looking up xxx.com". The connection usually returns on it's own, but it can take up to 3 or 5 minutes. When I get this message on the ethernet G4 tower, I will also have lost connection on the wireless Macs. For the first couple of weeks the tower was not connected and we were just using the two wireless Macs, and they were working well. It seems that as soon as I hooked up the G4 tower via ethernet, connections became very flaky and intermittent all of a sudden.All the Macs are configured for DHCP. We have a Time Warner cable modem. The G4 tower had previously been used at my office with it's own dedicated DSL modem / router, and it worked flawlessly for months at a time without dropping a connection.  I've tried rebooting the modem, then the router, then turning all the Macs back on, several times. Same result.  I just tried loading the new firmware but it didn't work. Said the Gateway was too crowded or something.

View 1 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd / Very Slow Connection (wired 57mbits / Wifi 4mbps)

Mar 27, 2013

Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet

I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.

Configuration:

Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled

[code].....

View 1 Replies View Related

Why Should Wireless And Wired Networks Be On Separate Subnets

Oct 24, 2011

With traditional classful subnetting, the same number of host bits is used to designate the subnet ID for all the resulting subnetworks. This type of subnetting always results in a fixed number of subnets and a fixed number of hosts per subnet. For this reason, this is known as fixed-length subnetting. The decision about how many host bits to use for the subnet ID is a big planning decision. There are two considerations when planning subnets: the number of hosts on each network, and the number of individual local networks needed. The table for the subnet possibilities for the 192.168.1.0 network shows how the selection of a number of bits for the subnet ID affects both the number of possible subnets and the number of hosts that can be in each subnet. One thing to keep in mind is that in all IPv4 networks, two host addresses are reserved: the all-0s and the all-1s. An address with all 0s in the host portion of the address is an invalid host address and usually refers to the entire network or subnetwork. An address with all 1s in the host portion is used as the local network broadcast address. When a network is subnetted, each subnet contains an all-0s and an all-1s host address that cannot be used for individual host addresses.

View 2 Replies View Related

D-Link DIR-825 :: Slow Streaming On Wired Connection

Mar 21, 2012

Recently replace my DIR-615 (it died after about 3 years of steady use) with the 825.Followed CD setup wizard, adjusted some manual thing as well. Am experiencing slow streaming speeds on various websites. A lot of 'loading' pauses within a youtube video for example when I never used to have any stutter at all on my old router.On a cable internet connection with a standard cable modem (no router in it).DIR-825 FW: 2.06NA HW: B1.Wired connection to router, not trying to steam over wireless.Speed tested at 14Mbps down which is what my provider (cogeco cable) promises.

View 1 Replies View Related

D-Link DIR-655 :: Wired Connection Random Drops?

Apr 12, 2011

I should start by saying I am no novice when it comes to networks but this router has been nothing but a issue since day one.

*The Setup - 2 wired PCS, 2 Wired Macs, 1 Wireless Iphone, 1 Wireless Ipad.
WPA2 Only / AES key, Channel 6, G/N only, Hidden SSID.

*The Problem - 95% of the time the wireless and wired is running fine. However, Sometimes randomly webpages on the computer will stop loading... but heres the kicker... other internet connected programs like Ventrilo, or torrents, or games will still be working and running from the net like there is no problem. When this happens the internet browsers on the macs and PCs will say page cannot be displayed instantly. Happens to all computers at the same time. After about 10min the webpages will load again. I have 16mbs internet and while this is happening my games and voice chat programs do not go up in ping at all.

I have turned off QoS since that made the most sence... but other then that I have no been able to figure it out. I even turned off wireless while it was happening and it still didnt fix it. A sure fire way to fix it is to restart the router.

I am 100% stumped. Do I just have a bad out of the box router? it is only 2 weeks old.

View 14 Replies View Related

D-Link DIR-600 :: Samsung TV Wired Connection Does Not Work With It

Oct 4, 2011

I have problem connecting Samsung (series6) TV to DIR-600. TV wired connection does not work with DLINK DIR-600 150. Is there a work around ?

Config :

DIR 600 is working in access point mode

Check list : Cat-6 Patch Cord - works (brand new works fine with laptop)TV network port - works (works fine with aztech ADSL/Switch)

View 14 Replies View Related

D-Link DIR-615 :: Low Speed As Compared With LAN Wired Connection

Apr 3, 2012

Why there is low speed using D-Link in compare with LAN wired connection?

View 9 Replies View Related

D-Link DIR-655 :: REVB Wired Connection Resets 100's Of Times Each Day

Jan 20, 2012

I bought a new DIR-655 REVB router, I already own the first version of the DIR-655 and worked fine, but the wireless range wasn't always the highest upstairs in my house and I was hoping with REVB they had improved the DIR-655's range.  I'm not a big wireless guy, meaning if I can use a hardwire connection I will use it, so my house is pretty well wired, but for my daughter and son's ipod and Zune the wireless connection was weak in their upstairs bedrooms.  It has been a disaster, the wired connections gets disconnected constantly, I say in the subject title 100's of times a day and I don't think I am exaggerating.  It started with Netflix and I thought my son was crazy, how could new router do this, but it was doing it everywhere.  It is hard to download files because I lose my connection.  I have DSL through Windstream.  My solution is to reinstall my old DIR-655. 

View 8 Replies View Related

D-Link DIR-655 :: WRT54GL High Ping Over Wired Connection

Oct 18, 2011

Since buying and using this router about 1 month ago, I've had latency problems. With my Linksys WRT54GL, my latency has always been consistent. However, pinging to google (as a benchmark), my ping is a good 50-70 higher than directly plugging into my router. Directly into my modem I get 10-20ms pings; through the router, I get minimum 60ms up to 100ms spikes. When using the Linksys router, my ping would be 20-30s. I really hope it's just a settings problem. I've turned off QoS and wireless to isolate the connection to just wired, but it still persists. I really hope I can fix this problem, else I am going to buy a different router over the weekend. I can't play FPS games like Bad Company 2 with such high latency.

View 1 Replies View Related

D-Link DIR-655 :: Sometimes Not Serving Pages On Wired Connection After Firmware Upgrade

Jan 4, 2013

I recently upgraded my DIR-655 to firmware version 2.10NA , 17, Oct, 2012.Ever since the upgrade, on a wired connection the router will occasionally not serve pages.  This shows up as a DNS error, stating the DNS lookup failed.  If I wait a bit and reload the page, it will sometimes resolve itself.  If I bypass the router and plug directly into the modem, the problem goes away completely.This is happening on my MacBook Pro, OS X 10.7.5, any browser (I use Chrome mostly, but also Safari and Firefox have the same issue).  This is not happening on my Linux laptop which I use wirelessly, or my iPhone or any of my wireless clients, though the same MacBook occasionally has trouble connecting if I DO try to use it wirelessly (I receive a connection timeout and cannot log on).  I'm not certain at this point if the trouble is with the router or the computer, but it only began happening (and happened immediately) after I installed the most recent firmware.

My security setup, if for any reason it matters, is WPA2 with MAC address filtering.

View 4 Replies View Related

Cabling / Cards :: Slow / Spiking Internet Speeds With Wired Connection Through D-link WBR-1310 Router

Sep 18, 2012

I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.

I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.

Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02

[Code]......

View 2 Replies View Related

Why Can't See Any Available Wireless Networks On D-link DWL-G510

Sep 22, 2011

Why can't I see any available wireless networks on wireless d-link DWL-G510?

View 2 Replies View Related

Have 2 Wireless Networks On 1 FiOS Connection?

Jun 4, 2011

I have an Actiontec wireless router (from Verizon) connected to my FiOS. Can I connect a second wireless router to my FiOS to provide 2 different wireless networks and if so, how do I connect it?

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 Keeps Losing Wired Connection To WAP54G?

Apr 11, 2012

I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81.  I'm not sure if this is an issue with the WAP or the router.
 
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time.  I used to have the power settings such that it didn't power down completely even after a long time.  With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died.  The wireless link would report that it had a solid connection, but I couldn't connect to anything.  Power cycling the WAP always fixed this.
 
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours.   Now, it seems I can't even go one day without losing my connection.
 
I am running the latest frimware in the WAP, and the router is version 3.1.  I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen.  I know from past experience that I will have to power cycle it to get it to talk to me again. 
 
In any event, it seems like the router connection to the WAP is timing out.  I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.

View 3 Replies View Related

Linksys Wired Router :: RV016 - Allow Other Networks Connected To Firewall To Access Internet?

Nov 24, 2011

I have a sonicwall firewall connected to the LAN port of the RV016 router and two DSL modems connected to the WAN ports.
 
Ip address allocation:

Firewall
192.168.50.9
RV016
LAN  - 192.168.50.10
WAN - 192.168.60.1
WAN - 192.168.61.1
 
What configurations do I need to enter into the RV016 to allow other networks connected to the firewall(192.168.3.0, 192.168.2.0) to access the internet?

View 1 Replies View Related

TP-Link WN722N USB Wireless Adapter Not Showing Any Networks?

Dec 31, 2012

Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.

View 4 Replies View Related

D-Link DIR-615 :: Wireless Network Disappearing Off Available Networks List?

Dec 13, 2011

I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.

View 1 Replies View Related

Wireless :: Cannot Access Social Networks And Emails Connection?

Dec 9, 2011

Social Networks, And E-mails Are Not Worked..... It Shows That This Connection Is Untrusted.

View 1 Replies View Related

Wireless Adapter Cannot Find Any Networks - Connection Vanished?

Jul 11, 2011

My internet has been working fine until a few minutes ago, when my connection just vanished. I went to try and reconnect but my Belkin N Wireless USB adapter could not find any wireless networks to connect to. While searching for a connection, the light starts blinking like it is searching, but then it says that it can't find any. Also, when I plug in the adapter, a popup comes up saying that there are wireless networks nearby, but when I click it there are still none.

I've tried reinstalling drivers but still nothing. I'm not sure what else to try because I'm afraid I might mess something up even more.

View 13 Replies View Related

TP-Link TL-WN722N Adapter - XP Not Showing View Available Wireless Networks

Oct 6, 2011

Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.

View 7 Replies View Related

D-Link DIR-615 :: Setup Two Wireless Networks On One Comcast Cable Modem?

Apr 7, 2013

We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.

Here's the equipment I'm working with:

DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U

I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.

View 1 Replies View Related

Linksys Wireless Router :: How To Link Two Networks WRT54GL - Unable To Access Printer

Sep 18, 2011

I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is  in this network : 192.168.0.x.

This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ? 

View 1 Replies View Related

Wireless And Wired Connection

Nov 24, 2012

[code]...

I came here after spending a long time of trying to figure out my problem. The problem is, my router will send a signal strong enough to my room because of the thick walls. I have a wire in my room that I connect to my computer for internet. I also have my xbox and other internet enabled devices that I would like to use. Is there some way I could buy a router for my room that gets the internet from a wire? Could I use my computer as a router?

View 5 Replies View Related

Wireless :: Getting Wifi With Wired Connection?

Mar 26, 2012

I have a wired connection & i bought a laptop can i have a wifi & wired connection at same time or can i connect my wireless router to my wired router?

View 2 Replies View Related

Wireless :: No Internet On Wired Connection

Aug 23, 2011

I'm able to access the internet through my wireless network on my laptop, but not on the computer I have wired straight to the router. Isn't that weird?

View 2 Replies View Related

Wired Connection Will Not Work After Trying To Set Up Wireless

Apr 3, 2011

I tried to set up a wireless router yesterday and when trying to connect with my laptop it had limited or no connectivity. I tried a few things but I couldn't get it to work so i switched back to my wired connection. Trying to set up the wireless router is not my concern though at the moment. Now my desktop can connect to the internet but my laptop and ps3 can not obtain an ip address. My desktop does not have a wireless card, thats the only thing I can think of why it will work when the other devices dont.

Right now I have my cable modem hooked up to a D-Link switch with my desktop and laptop connected. The desktop can connect and I get a limited or no activity with my laptop. I have reset the modem multiple times, restarted computers, Right clicked on my connection and tried to repair it, connect the laptop straight to the modem and did all of the above again. The IP and DNS are set to obtain automatically. Nothing is working that I know of but I can plug in my desktop and its up and going in 2 seconds.

The router was a very old one given to me from a friend. Its a Linksys V1. It is not connect to anything or even on now. The last time I tried to use this router I didn't get it to work and this same thing happened. I took it into work the next day and they were able to connect via wireless and wired using my D-Link switch. When I got home it work again just fine.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved