D-Link DIR-615 :: Where To Download Quick Router Setup Wizard

Feb 19, 2013

Don't have CD.  Where do I download this on Dlink site?

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G Setup Wizard CD And Hard Copy Quick Installation

Jun 17, 2007

I've currently got a WRT54G and have an opportunity to buy a WRT54GS. The problem is that the seller of the WRT54GS has lost the Set-Up Wizard CD & Hard Copy Quick Installation Guide. Obviously I have these items already with my WRT54G. My question is this. Are these items different for the WRT54G or will the stuff I already have for the WRT54G "work" for the WRT54GS.

View 5 Replies View Related

Linksys Access Point :: Wap54g Setup Wizard 3.0 Download?

Jan 13, 2012

wap54g setup wizard 3.0 download

View 1 Replies View Related

Install D-Link DWL-G122 - Can't Do Setup Wizard As Cd Player Doesn't Read It

Dec 26, 2011

Install my wireless adapter.i can't do the setup wizard as my cd player doesn't read it.

View 1 Replies View Related

Linksys Wireless Router :: Wrt160n To Download Install Wizard CD If Possible

Jul 24, 2012

Would like to get another  CD to install a wireless network for Cisco wrt160n v2 router. I have rest the router to factory default. Would prefer to download the install wizard CD if possible.

View 8 Replies View Related

D-Link DIR-825 :: Set Maximum Download Speed Of Torrent Protocol By Router Setup Page?

Oct 7, 2011

set the max download speed of torrent protocole by my router setup page ?My step father currently downloading with torrent and all the internet in the house is pretty slow so i will love to lower he speed so i can use my internet properly

View 5 Replies View Related

Wireless-N Gigabit Router (WRT310N) / Cannot Complete The Network Setup Wizard

Oct 2, 2011

I have two PCs connected to each other through a Wireless-N Gigabit Router (WRT310N). One PC is running Windws XP while the other is running Windows 7. At this point I do not have, or want, Internet connectivity. I would, however, like to call web pages on the Windows 7 PC from the Windows XP PC. The Windows 7 PC has php files that run C++ files to analyze files supplied by the Windows XP PC and I would like to send the results of the analysis back to the XP PC.The reason for this is that I am setting up a home based web site that allows users to run programs on my Windows 7 PC but I want to keep hackers from accessing files on my Windows 7 PC. So the XP will be connected directly to the Internet and the Windows 7 PC will only be connected to the XP PC.I can successfully ping both ways between the Windows 7 PC and XP PC. So I fire up FireFox (FF) on the XP PC and type the following in the FF URL box.

[code]....

The same happens when I replace the Windows 7 PC IP address with the Windows 7 PC name.I tried to set up a network between the two PCs with the MS network wizard on the XP box. It made a setup disk with a single file on it. I was supposed to run the setup file on the other PCs that are supposed to be on the network but, whe I did, I got the following message.Cannot complete the Network Setup Wizard,An error occurred during the configuration of the network on this computer.You can configure the network manually.

View 3 Replies View Related

D-Link DIR-825 :: Setup Download Available?

Jan 18, 2012

I'm attempting to set up a DIR 825 and I have a damaged setup disc.Is this available as a download?

View 3 Replies View Related

Cisco :: 851W Initial Setup / SDM Wizard Fails

Jun 21, 2011

I bought a Cisco 851W router from a coworker about a year ago and tried setting it up at my home with nothing but headaches. I finally gave up and went with DD-WRT and have yet to look back (my $40 router outperforms this thing on so many levels, but I'm getting off-topic!). I recently re-discovered this beast and pulled it out of storage to see if I could get a test network setup at home to practice on. I checked for any IOS updates and downloaded (and installed) the lastest image (c850-advsecurityk9-mz.124-15.T15.bin). I consoled in and verified the initial 10.10.10.1 IP was configured in the VLAN1 interface and directly connected a PC to one of the switchports and pulled a 10.10.10.2 address. I pull up SDM from my browser (I have used FF, IE, and Chrome, all with the same results. Java version is the latest, 6 Update 26.) and it launches the initial configuration wizard. I go through the steps and get up to the DHCP Configuration (after LAN, before Internet/WAN setup) and try to click Next and nothing happens. It doesn't freeze as I can easily go Back, but can never move forward beyond the DHCP configuration. Pressing Cancel on the wizard just shuts down SDM as a whole and exits.
 
In my troubleshooting steps, I did notice that as soon as I click Next in the DHCP configuration, nothing will happen in the wizard, but the SDM window in the background will automatically present the "Apply Changes" and "Discard Changes" buttons, which weren't there in the previous steps. Of course, neither of those are clickable due to the wizard being open. I really don't want to configure this thing from scratch using the CLI if I don't have to..is there ANY way I can bypass the SDM Wizard at all? Also, I'm running SDM Express, would downloading ASDM and trying to connect from there make any difference?

View 1 Replies View Related

Cisco Firewall :: ASDM 6.2 Configuration Tab Comes With Setup Wizard

Feb 7, 2012

Everything was working fine till one day, when clicking on Configuration Button you see setup wizard prompt.It's ASDM ver:6.2 and ASA 8.2. Everything is working fine, but now unable to change any rules.
 
It there simple cure for that?

View 2 Replies View Related

Linksys Wireless Adapters :: WET610N Setup Wizard Disc For Mac?

Oct 10, 2009

The "Setup Wizard" disc that came with my WET610N won't work in a Mac. Is there a disc or a download available?

View 6 Replies View Related

Linksys Cable / DSL :: Wrt54g When Open Adviser It Goes To Setup Wizard

Feb 28, 2012

I upgraded my router Linksys wrt54g to Linksys x2000. I was able to install the equipment with no problem, my problem is with the Linksys Advisor. When I open the adviser it goes to setup wizard, I get a screen that tells me to disconnect my old router which I have done. The next screen gives a list of routers to select from my router x2000 is not on the list. How can I get passed this screen? So I can use the adviser to set up other computers and printer.

View 1 Replies View Related

Cisco Wireless :: Unable To Associate With WAP321 After Setup Wizard

Aug 23, 2012

I just installed a WAP321. I literally configured a test SSID, implemented WPA Personal security, and could not get an iPad or Blackberry to associate with the network. The error message that appears in the Blackberry is "EAP Authentication Failed". But isn't EAP applicable only to the WPA Enterprise mode? The access point works fine if I have the test SSID without any security, but as soon as I turn on WPA Personal security, nothing can connect. Is there something really obvious I'm missing here?(When I select WPA Personal security, I have tried with just the "WPA2" version and "AES" cipher selected, as well as with check boxes ticked on both WPA/WPA2, and on both TKIP/AES. Neither works.)

View 8 Replies View Related

Cisco Infrastructure :: CCA 3.1(1) Device Setup Wizard Not Working For SR520-FE(W)?

Jan 5, 2012

Steps to repeat the bug:

1)  Physical Reset of SR520-FE to factory defaults

2)  Run CCA 3.1(1) and connect to 192.168.75.1 using the default cisco/cisco login

3)  Under the Home Menu, click the Device Setup Wizard

4)  In Step 1, sellect the SR520 and observe that there is also a photograph of the SR520-FE(W) model displayed as feedback for Step 1

5)  Try variations of Steps 2 through 4

Note:  Step 4 has a problem because it says to plug the power into the device, but if the power was not already plugged in to begin with, we could not run the Device Setup Wizard in the first place.

6)  Step 5 prompts for a user name and password. 

BUG:  No permutations of the documented default usernames and passwords "cisco" or "admin" work.  The result is always the error dialog:Device Connectivity Status - "Failure: Not Connected.""Return to Step 1.  Make sure that your PC is not connected to a network and you follow all the instructions."A search of the web indicates others are also had this unresolved issue with previous CCA releases.

View 1 Replies View Related

D-Link DIR-601 :: Do Need To Set Up WPS Using Wizard

Jan 28, 2012

I noticed my neighbors have a WEP password on their wi-fi networks but I don't with my DIR-601 router.  (I thought WEP was rather insecure.) But when I logged into the router and filled in the blank password field it refused to connect and showed no way to change it. I understand there is an always-active firewall built in. Does that protect my data and doesn't need a password? I also entered the router PIN number in a field but nothing further happened when I did. Do I need to set up WPS using the Wizard?

View 3 Replies View Related

D-Link DIR-615 :: CD Broken - How To Get To Installation Wizard

Feb 23, 2011

i have already installed this, but it stop working so i unplugged it, now cant find the CD

View 1 Replies View Related

Cabling / Cards :: D-Link DWA-125 Connection Wizard Does Not Close

Oct 28, 2011

When restarting my PC after a short power failure the D-Link connection wizard autostarts trying to connect to my wlan. After a short while I have a connection and is able to access the internet. The connection wizard, however does not register that a connection has been established and continues to attempt to connect for two minutes, then shuts down and immediately starts for another two-minute try....and so on. If I shut it down it just pops up again.This has never occured before. I run Windows 7 on an HP with an AMD processor.

View 3 Replies View Related

D-Link DCS-930L :: Wizard Won't Find Internet Connection

Feb 17, 2012

I have 3 932ls and one 930l in a house in Massachusetts, all registered onto my dlink. All went fine.I brought 3 more 932l and one 930l to a house in Mexico. I had problem w the 932l wizard. Then I noticed that I had brought 2 different wizard discs. They were different versions, the older one could not find a Internet connection, so I could go no further. I tried the newer version of the 932l wizard, it found my Internet connection, and did installation and registered all three 932ls to my current mydlink account. All fine so far. On my mydlink account I have the three Massachusetts 932s , the one Massachusetts 930, and the three Mexico 932s.

I had forget to bring the 930L disc for the installation. Here is where the problem started. I downloaded the 930L wizard from the Dlink site, but I can't get past that first section where is says " checking active x, checking Internet, checking LAN " or something to that effect. It then says " can't find Internet connection, check your adapter, router, etc" or something to that effect. I can't go any further with that wizard.  I was able to find the cam from my router and finally got that 930L interface, and did the manual as well as the automatic set-up. I can see the cam perfectly, by going to 192.168.1.101 I can log in, reset my password, did everything. I can see cam wirelessly.

The problem is that I CAN'T register it to my mydlink account, and hence can't see it on mydlink lite , etc.I can ONLY see the cam INTRANET - WISE.the 930L wizard that I downloaded is worthless. I have disabled firewall, did everything, tried an XP PC, as well as a windows 7 laptop.Is there any way to add the cam to my mydlink account ? I even tried the 932L wizard that DOES find my Internet connection, but it doesn't find my 930 at the part where I have to chase a cam to set up.  If I can't add the 930L to my mydlink account, I would even be happy if I could access it from the 192.168.1. ddress, but I dont know how to set that up so that I can do that from a different network than my own. I suppose that there must be a way to get to my modem, my router and then to that 192.168.1.101 address?

View 3 Replies View Related

Linksys Wireless Router :: Download Setup For WRT54G V8 - Lost CD

Feb 27, 2009

I have lost my installation disk for my WRT54G Version 8.  Where I can download the drivers and installation.

View 9 Replies View Related

D-Link DIR-655 :: Router Slows Down Download Speed

Feb 18, 2011

When I connect directly to my dsl modem, I am getting better than 5 megabits/sec. which is what I should be getting for download speed.When connected thru the router, I am getting about half of that.My wireless connection speed is 54 megabits/sec, so that is ok. I cannot get any connection when I hardwire the connection from the pc to the router too.

View 4 Replies View Related

D-Link DIR-655 :: Getting Super Slow Download Speeds With Router

Dec 14, 2011

I had my Dir-655 router for over a year & this is is a first.My firmware is 1.21 & I only use my router for gaming when I'm not on my PC for home use. I have only one PC in the house that is not shared, I have also not downloaded any virus or maleware.So the past month I decided to buy a wired ethernet cord to connect to my gaming systems rather than using the wireless option to get an extra bit of speed. That has been working fine up till yesterday when all of a sudden my download speeds dropped from around 20Mb down to barely 1Mb down (I can't even get the speed test site to fully load anymore). The upload & ping remains unchanged though. Only my Download speed is being affected. This is both when I'm on the PC & when I'm online gaming.

I unplugged my D-Link router & plugged my modem directly to my PC & I got back the 20+Mb speed, so the modem or cable company are not at fault (I even called them to see if there were any problems on there end).

-I tried turning off my Firewall on my PC.
-Resetting & rebooting both my modem/router/PC.
-using different DNS numbers.
-using /flushdns.
-using /Iprenew.
-Messing around with my router configurations such as:
 turning off QoS Engine.
 turning off wireless.
 turned of MAC filtering.
 unchecked "Add DHCP Reservation".
 unchecked SIP.

None of it worked. I'm still browsing at around 56k dial up speed for the past day+!I read up on the internet for similar problems, but the only solutions I saw was turning off the firewall on the PC, but that hasn't worked at all.

View 4 Replies View Related

D-Link DIR-655 - How To Block Internet Download Manager In Router

Feb 17, 2013

I've been searching in google on how to block IDM in my router D-Link DIR-655, i need to block this application because we have a large network here in our office, and i found out mostly of our users when i check have a IDM installed in thier pc and its affecting our internet connection.

View 13 Replies View Related

Linksys Wireless Router :: Link To Directly Download EA4500 Firmware?

May 24, 2012

is there a link to directly download the EA4500 firmware?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GL Not Setting Wizard By Windows 7?

Apr 6, 2013

SetupWizard fails for the WRT54GL.   I'm using Windows 7.  Even though the software failed the router WRT54GL seems to work.Why did the SetupWizard fail?

View 1 Replies View Related

Linksys Wired Router :: Set Up Wizard Not Finding / Locating Befsr41?

Jan 20, 2012

I just purchased a befsr41. i have wireless internet so there is no modem to plug into. when i try to setup wizard it gets all the way to checking computer staus, then at 99% it says it cannot find router. i have pinged the router following the instructions on this site and the computer found the router, but when i tryed to go to browser to go to site it won't let me on any pages. i have found that while router is plugged in i can't access internet, but the set up disc can't locate the router. why wouldn't the set up wizard find router? and i am using win 7 with xp capable.

View 3 Replies View Related

D-Link DIR-655 :: Setup My Router And Notebook To Get 802.11n?

Sep 17, 2011

Ive just bought a new Toshiba laptop that support 802n, and have an old HP which does not.en choosing 802n only, the Toshiba for strange reason cannot connect to my router.

View 14 Replies View Related

D-Link DIR-600 :: Unable To Continue Router Setup

Jan 26, 2012

Using the quick set up of DIR-600 from the CD, I encounter this message:"Your new router does not appear to be connected properly.Follow these steps:

1)Make sure that your are connecting your new router...
2)Make sure the ethernet cable from your PC is securely...
3)Click Retry to try installing your router again."

I tried all several times and still I end up on that screen message.

View 5 Replies View Related

D-Link DIR-655 :: Printer Setup Using USB Port On Router?

Jan 9, 2012

I am trying to setup my printer using the USB port on the router. I installed the share-port utility  32bit and every time i try to connect to the printer from my desktop the computer crashes and i get a blue screen.

View 14 Replies View Related

Steps To Setup D-Link Dwl 2100ap Wireless Router?

Jun 10, 2011

How to set up D link DWL 2100AP as wireless router?

View 1 Replies View Related

D Link N150 Security Wireless Router Setup?

Jun 21, 2012

I can't to put the security on my D-Link N150 some pepeol us my wifi some time.

View 1 Replies View Related

Time Warner Internet / D-link Router Setup?

Jan 27, 2011

I am trying to set up a d-link router with a modem provided by time warner cable. I've powered down, reset the router, and I've put it on dynamic settings (sorry if that's incorrect terminology... not a comp. buff). I can't get my wireless to connect to internet.

View 1 Replies View Related

D-Link DAP-1522 :: How To Setup This Router With Asus RT-N56U

Sep 2, 2012

I use to have a DIR-655 and dap-1522 both worked without any issues. I recently upgraded to Asus RT-n56u and now I want to setup the dap-1522 with it.I have no issues with the Asus RT-n56u everything seems to work fine here the problem seems to be with the dap-1522 where it connects but then disconnects almost instantly.

1) Connect dap-1522 with my desktop computer via Ethernet

2) Change the LAN settings for tcp/ip v4 to manual IP

3) I set the manual IP to 192.168.0.60/ subnet mask 255.255.255.0 and the default gateway to 192.168.0.50

4) I open my web browser and connect to 192.168.0.50 and I see the dlink page and I log in fine.

5)I tried going through the wizard, picked manual and have tried both the 2.4ghz and 5.0ghz bands they are set up as WPA-Auto Personal and I enter in my password. It says settings will be saved

6) The page refreshes to the wireless one but I don't see any options here just the save config one. When I go to status sometimes it says its connected but sometimes it just says it's not I try to unplug from my desktop and take it over to where my apple tv is but it never works..One thing I should note is my asus is connected to 192.168.1.X so do I need to change the dap-1522 to 192.168.1.50? instead of 0.50?

View 12 Replies View Related

D-LINK DIR-524 / Setup Second Router To Existing One To Make Range Better

Jan 26, 2012

I just bought a new wireless router and I currently using my older dlink dir-524 wireless router in my home.eason in buying a new one is because currently the dlink router is in the family room use to be a garage and my wifes imac is in our bedroom the couple rooms down not next door or anything, and the imac and even our smartphones when in our bedroom the connection gets disconnected then reconnected etc etc, basically signal strength is low initially when connected to the router.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved