D-Link DIR-655 :: 1.35NA Timeout In Like 10 Sec

Mar 4, 2011

I have just updated myDIR-655 A4 to firmware 1.35NA by the procedure: save config > upload firmware > load config.However after upgrading, my admin page now logout after every ~10 sec of inactivity.I have tried the method where to view the admin page without a style, to be able to set the timeout period, from 5 mins to 3, 8 and 10 mins, but no matter what I set, it still logs me out after ~10 sec.

View 4 Replies


D-Link DIR-655 :: Can't Revert Or Reset After 1.35NA

May 12, 2011

So, after everyone was raving about the 1.35NA version, I downloaded it.  As I always do, I disabled my wireless NIC and connected an RJ-45.  I saved my config to a .gws file.  I uploaded the new firmware.  When I went to reload my settings file, it said it was not a valid file.  I tried multiple times.  I even tried earlier versions of saved config files.  Same thing. 

So, I figured I'd revert to the 1.34NA firmware it was previously on.  It wouldn't take it.  So, I used the router config "system" page and chose "restore factory defaults".  It didn't work.  It still had the 1.35NA.  So, I used the router's reset button.  I held it in for 10 seconds, saw the system lights all blink in unison.  I checked the config page and it was still on 1.35NA. 

View 2 Replies View Related

D-Link DIR-655 :: 1.35na Firmware Does Not Allow Downgrade

Feb 26, 2011

i just thought i would try 1.35na firmware and i decided i wanted to go back to 1.33na, well you cant  BE FOREWARNED.

i don't know what is the big deal about stopping you from downgrading your firmware that they lock you out of it. it never used to be a problem, pretty sure i could downgrade from 1.34na to other 1.3 firmware.

the reason for allowing people to downgrade is incase the new firmware does not work properlly. not allowing your customers to do this is just asking for trouble not to mention alienating your customers.

at work we downgrade firmware to the firmware that passed our quality tests, it also makes it easier to support them when they are all the same.

1.35 works well so i dont have to buy another router. if it doesn't you can be sure it wont be another dlink thats for sure.

View 3 Replies View Related

D-Link DIR-655 :: Updating Firmware To V1.35NA?

Dec 30, 2010

I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).

However, I found something strange while updating the firmware, that made me stop, in order to ask the question.

Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.

Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.

View 9 Replies View Related

D-Link DIR-655 :: Can Go Back To 1.34NA From 1.35NA

May 5, 2011

Is it possible to go back to FW 1.34NA from 1.35NA ?  I tried all normal methods and got poo-poo'd by the router...

View 1 Replies View Related

D-Link DIR-655 :: Can't Downgrade From Firmware 1.35NA

Jan 12, 2011

I purchased a DIR-655 (A4) a few weeks ago, and was encountering a problem.  I immediately upgraded to 1.35NA after I bought it.  First, the actual problem: With WMM enabled, my internet speeds are very inconsistent.  By that, I mean it will fluctuate between full ISP speed and less than half the speed.  A few seconds at full, a few seconds at half or less, and so on.  Well, when I disable WMM, with everything else the same, the internet speeds suddenly become consistently fast at full speed, but PC-to-PC (LAN-to-LAN) wireless transfers slow down considerably.  So no matter what I do I get a negative result.

Thus, I figured I would try downgrading the firmware to 1.32NA, 1.33NA, or 1.34NA, as I read that it is not possible to downgrade directly to 1.2x.  I thought I would simply troubleshoot the problem myself.  Unfortunately, no matter which firmware I try, except 1.35NA, it gives me a paragraph explanation; something like "This file was either not intended for this router, or it is corrupt.  Your router will not be programmed."  It did allow a reflash of 1.35NA, though.  I downloaded multiple firmwares directly from the D-Link ftp multiple times, using a different router, so the files should not be corrupt.

Is it simply not possible to downgrade once you flash 1.35NA?  For the record, I also tried a few of the workarounds I found on the internet: (1) do a hard reset by holding in the reset button and cycling power for 30 secs. (2) I tried some firmware directly from the German FTP which was supposed to allow a downgrade, but still got the same error as above.  (3) I also tried some Russian firmware and it didn't work either.  I was using a hardwired connection to the router during all attempts to flash.

View 5 Replies View Related

D-Link DIR-655 :: Downgrade From 1.35NA To 1.34WW?

Jan 3, 2011

Today I modified a firmware 1.34WW which is stitched atop 1.35NA ! [URL]

View 11 Replies View Related

D-Link DIR-655 :: Rev A4 - Firmware 1.35NA - Securespot Log Entries?

Jan 22, 2011

I have a DIR-655 rev A4 with firmware 1.35NA.I read [URL] 5 which stated that the SECURESPOT feature was removed as of firmware 1.35NA but since upgrading the router to 1.35NA I find the following two log entries mentioning securespot being initiated:

[INFO]   Sat Jan 22 21:01:21 2011   Initiating securespot services.
[INFO]   Sat Jan 22 21:01:21 2011   Allocating securespot services.

I will mention, before upgrading to 1.35NA I was running the stock 1.21 firmware that shipped with this router. Prior to updating to 1.35NA I had taken a backup of the router settings and after the firmware update was applied I restored this settings backup. Could that be the reason this log entry is showing up? It makes me think securespot is not really removed as is claimed in the release notes for this firmware.Can anyone else with a DIR-655 A4 w/firmware 1.35NA confirm the above two log entries mentioning securespot appear in the log (assuming ALL log settings are turned on) when your router is rebooted?

View 2 Replies View Related

D-Link DIR-655 :: Webfilter Fails After Updating To 1.35NA?

Jan 19, 2011

I've been using the web filter with no problem with my A3/1.33NA router until I upgraded to 1.35 last week. After the upgrade, i did a hard reset and re-entered the websites manually from scratch to the DENY list. I didn't even reuse the saved config file. And now the router no longer blocks any of the websites in the webfilter page even when i selected the ALLOW option.

View 14 Replies View Related

D-Link DIR-655 :: Why Does 1.35NA Open A Port For BSecure

Apr 25, 2011

I recently upgraded my DIR-655, H/W Version A3 from 1.21 w/o SecureSpot to 1.35NA.  My understanding this that this version isn't supposed to have any SecureSpot support.  However, whenever the router is rebooted, the logs contain an entry that reads: 

Bsecure remote access enabled on port 8098.

View 10 Replies View Related

D-Link DIR-655 :: Unable To Access Web After Updating Firmware To 1.35NA

May 3, 2011

Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?

View 14 Replies View Related

D-Link DIR-655 :: Current Version 1.35NA - Upgrade Firmware?

Jul 17, 2011

I would upgrade the firmware before deciding to replace router with a new one. I noticed there have been several updates to the firmware since I originally installed the router with the current available firmware version of 1.35NA.

View 12 Replies View Related

D-Link DIR-655 :: Intermittent Wi-Fi Signal Dropped Randomly 1.35NA

Jan 13, 2011

For those of you foolish enough to upgrade to your firmware to 1.35NA, only to find that all your wireless clients are intermittently dropped randomly at the same time, read on.At the time of this simultaneous drop, the logs will tell you that the clients were "disconnected due to deauthorisation" or some such (precise wording eludes me, has not occurred for a while, which is a good thing!). The clients are then quickly "authorised", but the movie you were streaming to your living room has already been interrupted and all your family members have gone for an unexpected toilet / snack break. Needless to say, the movie is ruined. Playing/hosting online games is an exercise in slowly pulling out all your remaining hair folicles. A random 20s delay when surfing the web is also fun. The list goes on.

A quick glance at the forum suggests this is a common problem, with the only reproducible solution to downgrade your firmware, perhaps all the way to 1.21.Get this though, you cannot downgrade 1.35NA by any means known to us internet-using, neanderthal-descendant primates (yes, your ancestor interbred with them). All workarounds to downgrade the firmware currently do not work for the new firmware.Why this is not suggested more often on these forums, I cannot fathom. There are a few threads that end like this though: "Oh, switched to WPS and the problem went away.Of course, if your wireless clients do not support WPS, then, um...facepalm yourself again. Only one of them has to though, the rest non-WPS clients you can copy paste the extremely long password to.Not so important settings: (changing these will do nothing to alleviate the drops)

Now that I have provided you with the meaning to life, the universe, and everything (42, I mean WPS), enjoy "normal" wireless behaviour again. OMG, I can actually surf the internet, torrent, play games, stream movies again.Some far more knowledgeable person might speculate as to the reason why this is so...actually, I will start the useless speculation. There must have been a security issue, that was remedied with the more recent 1.3xx firmwares. At the same time, constant authorisation checks were added. The deauthorisation/ authorisation cycle is snappy and unnoticeable with WPS, yet horrible without WPS.

View 12 Replies View Related

D-Link DIR-655 :: Webaccess Filter / Access Control Doesn't Work With 1.35NA

Aug 28, 2011

For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA.  I've tried it with MAC and IP Address without any success.  I've also enabled/disabled/enabled DNS Relay, recreated the rules,  recreated the filters, etc.  Nothing.

View 14 Replies View Related

Cisco Firewall :: ASA 8.2(5) - Uauth Absolute Timeout Disabled And Inactivity Timeout Set To 48 Hour

Nov 26, 2012

ASA 8.2(5), uauth absolute timeout is disabled and inactivity timeout is set to 48 hours:
timeout xlate 48:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:00:00 absolute uauth 48:00:00 inactivity
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
Users still get kicked out every 8 hours and they have to reauth. This is a logging message:
%ASA-5-109012: Authen Session End: user 'john', sid 839, elapsed 28801 seconds

View 1 Replies View Related

D-Link DIR-825 :: Set NAT Timeout On It?

Apr 19, 2011

I have a D-Link DIR-825.B1, which I've recently updated to the 2.04EU firmware. The update fixed some IPv6 problems I've had, but introduced an IPv4 problem instead: TCP NATs have a rediculesly low timeout of 60 seconds, which makes the router useless for most protocols.How do I set the NAT timeout for TCP connections?

View 4 Replies View Related

D-Link DIR-825 :: Web Interface Has Low Timeout?

May 1, 2013

Search for 'DIR-825 timeout' only returned a half page and none were relevant.

DIR-825 2.03NA - The web interface has a ridiculously low timeout value. 60 seconds maybe?

I can't build a list of MAC addresses, e.g., before it reaches the timeout. I try to save.... and I have to log back in. And my changes are gone.

What's maddening is that it WAS working the way I wanted, with seemingly no timeout, until recently when I had to basically re-do my network.

View 4 Replies View Related

D-Link DIR-601 :: Getting Ping Timeout While Using This Router?

May 25, 2011

Getting ping timeout while using this router? (know that it IS the router tested with other routers)

View 7 Replies View Related

D-Link DCS-930L :: Connection Timeout From 3G?

Jun 10, 2012

I am able to access 930L (2 cams) from wifi be it laptop,iphone or ipad but I am not able to see it through 3g.I have Huawei fibre optics broadband reuter from Starhub.Starhub is running away if ask them to fix it. Huawei never takes the call.I tried atleast 3 times 10 minutes each at 8006011450.It goes to disconnect. The lot talked about UPNP is enable in reuter but it does not work.

Now i talked to Dlink support with ticket DCX36811.They advised to load the firmware.I did it still the connection timeout is there. we have baby to monitor through iphone/android 3g.

View 2 Replies View Related

Cabling / Cards :: D-link Dir-300 Connection Timeout

May 13, 2012

I'm using the D-link dir-300 wi-fi router. Cable internet connection. PC is connected to the router by the cable and the laptop via wi-fi. Both machines have the same problem - after some time, although there are no package loss when I'm pinging anything, some services report "connection timeout". Such as PvP.net, EA Online and Turbofilm.tv. Soft reset, hard reset didn't solve anything. Although when PC is connected straight to the main internet cable - there are no problems at all. [code]

View 7 Replies View Related

D-Link DIR-825 :: Internet Session TCP Timeout So Low - 120 Seconds?

Mar 1, 2013

I have a DIR-825 with 2.60VT firmware (rented from Videotron).

Even though the manual says the stateful firewall should have a timeout on connections of 240 seconds or 7800 seconds, all of my connections start at a mere 120 seconds. I'm having trouble with IMAP IDLE pushing e-mails because the connections timeout so quickly (before any stay alive can be sent). A connection to the e-mail server gets opened on 143 (Videotron) or 993 (encrypted - google, e.g.), and I see the connection on the Internet Sessions page, the timeout starts at 120. When it hits 0, the connection is no longer displayed (it is not renewed), and the IMAP IDLE ****s out because the server can't find the client (i.e. the connection has been closed). But it's not just on those ports or servers. ALL of my TCP sessions begin at a mere 120 seconds! Even for a home router, isn't this way too low?

confirm that their DIR-825, on the Internet Sessions page, shows initial timeout values of greater than 120 for a TCP connection? I would love to see a picture of that screen showing higher values. Does it start at 240? Do you ever see a connection start at a timeout of 7800?

I see no way of changing the timeout value. Is it possible to force connections on certain ports to begin at a higher timeout value?

View 5 Replies View Related

D-Link DIR-655 :: Blocked Icmp / Tcp Packets And Udp Timeout?

Jun 1, 2012

got this problem within the last few days

UPnP renew entry <-> <-> UDP timeout:-1 'Teredo' (this one repeated 13 times just in that 1 info slot)

Blocked outgoing ICMP packet (ICMP type 3) from to

Blocked incoming TCP packet from to as SYN:ACK received but there is no active connection

this goes on for a multiple of different ip's and i believe its due to the fact that the game i play is p2p

QoS is off spi is off udp and tcp endpoint independent firmware version 1.21 i am using wireless cable isp using motorola sb5101 i believe i port forwarded the ports used for the game but that didnt work so i put my computer into dmz. I've  also noticed a lot more jitter then i used to have and my upload speed is down about 4mbps. Was thinking it might just be outdated firmware?

View 3 Replies View Related

D-Link DIR-655 :: DNS Server Timeout / Lockup / Crash

Dec 12, 2010

So I just bought a D-link DIR-655.  It's a B1 hardware with the 2.00NA firmware.  After a few hours the DNS server in the DIR-655 stops responding.  This happens on all of the PCs connected to it (both wired and wireless) who have their DNS server set to  The only way I've found to recover is to reboot the router, change something in router's the configuration causing the router to re-initialize, or to ping an external site from the ping test console.  When this happens the external ISP DNS server are still working (confirmed by NS lookup testing manually setting them).

View 6 Replies View Related

TP-link TL-WN722N / Intermittent Wireless Connection Timeout

Jul 14, 2012

I've been running into an issue for the past week or so where my wireless adapter intermittently can't contact my router.When it occurs the network connection reads as having limited connectivity. I'm unable to send requests to load webpages, and videos and the like stop loading. Sometimes the network disconnects entirely. After this occurs, I can't connect again for a few minutes. My connection consistently reads as having 2-3 bars available. The issue tends to occur frequently, often every 15 minutes or so. Strangely enough, I have been able to play bf3 online for over 40 minutes without connection problems (I quit before any occurred - not sure if any would have). So far I've tried the windows troubleshooter, updating the driver to my wireless networking adapter, manually assigning my network address (tried,, etc), setting my 802.11b preamble to "Long only" and performing a system restore. I have rebooted my machine as well.

My technical specs are as follows:I'm running Windows 7 Ultimate N 64 bit edition with service pack 1. System has 8gb Ram, an i5-3570k processor and HD7850 graphics card. Motherboard is the Asrock Z77 extreme 4. My wireless network adapter is the TP-link TL-WN722N. The adapter was working fine for some time before this issue appeared.My router is an old U.S. Robotics Wireless MaxG Router. It seems to work fine with other computers in the household, although it does require fairly frequent power-cycling. Running ipconfig on the command prompt while the internet is working returns:


Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::293a:e9bb:ba5a:7536%14
IPv4 Address. . . . . . . . . . . :


View 3 Replies View Related

D-Link DSL-2680 - Can't Connect To Router's Admin Page (timeout)

Feb 28, 2011

For about a month or two now, I've not been able to connect to my router's admin page @ I am using a D-Link DSL-2680 router.

Whenever I go to connect to in my Web Browser, it just sits there trying to connect and does nothing. But eventually after some minutes I get the error: 'This web page is not available The web page at might be temporarily down or it may have moved permanently to a new web address. Error 101 (net::ERR_CONNECTION_RESET): Unknown error.' Here is a screenshot:

I tried pressing the reset button on the back of my router, but it would just sit there with the green power LED and another green LED just flashing constantly (I assume this is the ethernet 1 cable LED) and this happens for more than 10 minutes.

All I want to do is just port forward my game servers again without the use of Hamachi or other programs

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR841N - Timeout Or Delay On Opening Some Websites

Mar 12, 2013

Region : Vietnam
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : VNPT on Vietnam

I have bought WR841 V8.3. Signal show is good, but i ping to router many timeout or delay when i open some website. Ping only geog when i near router.(some time delay)

View 2 Replies View Related

Cisco :: ARP Database Timeout?

Aug 16, 2012

How do I, if I even can, adjust the MAC table timeout from 5 minutes to whatever is bigger and allowable?

I would like to also like to change the ARP table timeout as well.

View 4 Replies View Related

Cisco WAN :: 857 W - First Ping Timeout

Jan 16, 2011

I know there has already been a couple of threads on this but rather than add my question to the bottom of one of those I thought I would try afresh.
We have an 857W connected to the internet via ADSL. All works very well, however if I ping from an attached PC the first one always times out. If i ping from the router (ping { URL}source I get !!!!! every time. Back to the PC and 'Request timed out' on the first.
The only way I have been able to resolve this is by using no ip cef. It then works as expected, first ping and all. The problem is after much reading, it is not ideal to disable cef.

View 21 Replies View Related

Wireless Authentication Failed Because Of Timeout

Nov 24, 2012

I've just purchased a second hand laptop for my Hubby and trying to gain access to the internet through my SKY wifi router. It keeps saying its within range but this error of Wireless authentication failed because of timeout!

View 5 Replies View Related

Getting Timeout Error On A Specific Website?

Jul 3, 2012

When I try to access Gizmo's Freeware | Find the best freeware fast, I'm getting timeout errors. I tried using different browsers but got the same result. All other websites loads fine in my browsers.I checked Down For Everyone Or Just Me -> Check if your website is down or up? and found that it's just me who's facing this problem.I also did a "tracert" from command prompt and got request timed out in the 19th hop at[CODE]

View 2 Replies View Related

Remote Desktop Timeout Due To No Activity?

Mar 30, 2012

REmote desktop connection times out when there is no activity, I mean I open rdp to work computer from home ,If I am away from the computer I am not using keyboard , after few minutes I get a blank screen and if it is very longthe connection times out and I have to relogin to my computer, I need suggestion on how to retain the connection so that no blank screen appears and I alos dont loose connection .

View 1 Replies View Related

Wireless Authentication Failed Because Of A Timeout?

May 3, 2011

picking up on old thread, but same issue: authentification failed because of a timeout

*previously*! i was able to auto connect fine on this home network via wifi.the line and box recently changed, same provider, and now i'm the only one who can't connect.the SSID changed, but i've done all the usual routines, deleting and re-adding manually, etc. but nothing so far...

i *don't* think this is a case of changing gear, but i don't know enough about internet/connection/configuration to fix this. yet!

NB: when i perform the reset on the box as instructed, using the provider's setup software - i am not the account holder - for the wifi, it shows connected very briefly in the animation, and then goes off again; this is the authentification/verification failing, i conclude.

so: with what is said above, i'm wondering if my antivir is to blame, or the windows firewall settings.or malwarebytes.i'm going to study the info i've got off my system, and looking at the router via the http routine, offline, as i now have to get off the internet(...); i'll get the infos together so i can post something useful.

View 7 Replies View Related

Linksys E3200 - First Ping Timeout

Oct 21, 2012

I have an issue that websites take a few seconds before they start loading, despite about 20Mbps download speeds.I've traced the problem to my E3200: when I ping a website, the first ping times out and only subsequent pings return. If I immediately ping the website again then everything is fine. After a few minutes the problem would resurface (per the specific website). This does NOT happen when I connect directly to my cable modem. This does happen both from wired and wireless devices. Happens on both Mac and Windows.

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved