D-Link DIR-655 :: 10Mbps Up When Connected Directly Through Wired Connections

Nov 11, 2012

I've been trying to find a response or a fix to this issue for a few weeks now.My DIR-655 RevB router is currently at firmware 2.07NA, and has speeds of around 30Mbps down and 10Mbps up when connected directly through wired connections.However over wifi, I am only getting around about 5 Mbps down and 2 Mbps up.  I've tried the 'usual' fixes suggested on here, change broadcast signal to manual, not auto, shutting of QoS shaping, all of that. However nothing seems to be improving the speed. 

View 8 Replies


ADVERTISEMENT

D-Link DIR-825 :: Disconnections - Wired Directly To Router

Jul 18, 2011

I have had my DIR-825 for a year and half. My computer that is wired directly to the router keeps losing the connection to the router - unable to obtain an address.  All of my other devices (that are connected via wireless) still hold the connection with no issues.  I've checked the cable, unplugged/plugged back into the router, and it shows connection on the network card on the back of the computer.I have used the system interface to ensure the address is a valid one.  I have powered up and down the computer multiple times and have also powered down and up both the router and the cable modem.

View 1 Replies View Related

D-Link DIR-600 Modem Can Connect Directly To PC But Not Through Wireless Or Wired Router

Aug 12, 2012

I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).

I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.

View 14 Replies View Related

D-Link DIR-655 :: Router Is Not Recognizing Laptop As Directly Connected Device

Oct 27, 2011

I have a setup where there are two networks. A 172.16.0.0/16 and a 10.1.0.0/16 that are separated by the dlink router. I am able to ping from the 172 network to the 10 network using a laptop that is directly connected to the router and that laptop can also browse the web fine. However, I cannot ping to that router or access that subnet at all from the 10 network (if I try to access its LAN (the 172 network)). The 172 network is on its LAN and the 10 network is its WAN. I can access its WAN fine. Also, there the router is not recognizing the laptop as a "directly connected deivce" but its not preventing the laptop from using the router. I have tried to make the router as least secure as possible but still nothing.

I thought about making Static Route to point towards the router's LAN but the only option it gives me is the WAN for the exit interface.

View 1 Replies View Related

D-Link DIR-655 :: Slowing Internet Down But Fine When Directly Connected To Modem

Jun 9, 2011

I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.

I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.

View 12 Replies View Related

Linksys Wireless Router :: WRT120N Two Desktops Connected Via Wired Connections

Jan 6, 2012

I have a Linksys WRT120N with two desktops connected via wired connections.In the house, there are two students accessing the Internet through WiFi via the WRT120N.One of the laptops (on an Apple laptop)  seems to lose its' connection from time to time.The other laptop (Lenovo) is located the furthest distance from the router and only gets two bars signal strength.Would my best option to improve the signal strength for the Lenovo laptop and hopefully, also increase reliability for the Apple laptop be to purchase a new router such as a Linksys E1500 with speed boost or would it be best to try a Linksys range extender (RE1000)?

View 2 Replies View Related

Cisco WAN :: Catalyst 6509 Switches Connected Directly Using Direct Point To Point Link

Apr 14, 2013

I have 2 Cisco Catalyst 6509 switches connected directly using direct point to point link.The OSPF is configured for point - point link.The currently the interface is down administratively.I will unshut the port . After that i would like to know how much time will it take for the ospf to establish the neighbour relation.

View 5 Replies View Related

D-Link DIR-655 :: Dropping Wired And Wireless Connections?

Feb 8, 2013

After 5 years of services my DIR-655 begun acting up yesterday; first of it begun by getting REALLY slow, it could take up to 25 seconds to login into the software and up to 30+ seconds just going from one menu to another, on some instances connection (wired) to the router was lost. This morning it started dropping all connections, wired or not; first my iphone then my WDTV, after that it's been pretty much random connections. On one given moment wired works but not wireless, then wireless works but not wired and sometimes I get both but for 3 or 4 minutes.I've reset the router to factory settings, plugged/unplugged, changed cables, network adapters on desktops and the problem persists.

DIR-655 A2
FW: 1.35
Connection: ADSL

View 2 Replies View Related

D-Link DIR-300 Very Often Loses Connection On Wired And Wireless Connections

Nov 25, 2011

My D-Link DIR-300 very often loses connection on wired and wireless connections. It stops connecting to Internet randomly i.e. any URL typed in from the browser times out.I connect various devices such as desktop, laptop, ipad2 over wired and wireless connections and the behavior is the same from all devices when this problem occurs. If I make a direct connection to the DLS modem, it works fine for the whole day, without these issues.I also observed IP address conflict messages and my desktop does not connect to Internet if I am running VPN on my laptop, at the same time, occasionally.When this occurs, I am able to login to the router and can see the WAN status and the DHCP address being allocated to the router. I can even do DHCP release and renew, but that does not fix the problem.

View 3 Replies View Related

D-Link DIR-655 :: Network Stops Working For Wired PC Connections

Jun 20, 2011

I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.

-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine

I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]

View 4 Replies View Related

D-link Dir-655 :: Router Drops All Connections Once Connected Via Wifi To Specific Notebook

Jan 9, 2012

My 655 router (RevB, Firmware 2.03) is connected from one side to a DSL modem and on the side to  two wired PC's and via wi-fi to several other wireless clients (two smart phones and two notebooks). All is well until I try to connect a specific notebook. Connection is estabished for about 30sec and then the router drops ALL connections (including internet and local network!) and I must re-start him by un-plugging from power. This phenomena is specific to a specific notebook since with the other one

View 7 Replies View Related

Link Speed Set To 10mbps - Doesn't Change

Mar 9, 2013

So I'm on the 100mbps virgin fibre optic broadband, and for the past couple of days, every now and again my speed drops drastically. It's not the Internet, because I've tested it on my laptop both wireless and plugged in. Even my phone and iPad are getting higher speed.

When I first got the internet(About a week ago) my download speed was 100+ mbps, but now my Link speed is constantly at 10mbps, even if I set my NIC to 1gbps full duplex, I've tried disabling and re enabling, I've tried uninstalling and reinstalling drivers, updating drivers. Restarting the router, starting it in Modem mode.

View 1 Replies View Related

D-Link DIR-655 :: DL Speed Drop From 26mbps To 10mbps When Connect

Jul 23, 2011

I have used DIR-655 (HW:B1 FIRM: 2.00NA) with Motorola SB6120 for sometime without any incidents.  My dl speed usually is around 26mbps. Lately, it happens twice that the dl speed drop to 10mbps. If I connect the SB6120 directly to my PC, the dl speed is 30mbps. Is my DIR-655 dead?

View 8 Replies View Related

Cannot Connect Directly PPPOe Wired

Apr 4, 2012

I have a Broadband Optical fibre cable which i used to connect directly to my Desktop and Laptop, i am running win7 on on my desktop/laptop, yesterday I installed Belkin router for my Laptop, worked fine, laptop is wireless now. But when I connected the desktop directly there is an error "670 cannot connect to the server/ cannot find the modem" I deleted the dialup and created new one still the same issue. However If i connect the cable through the Router to the desktop it works. I think I lost the direct connection.

View 2 Replies View Related

D-Link DIR-655 :: Connected A Wired Weather Internet Bridge To Another Ethernet Port

Feb 14, 2013

I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients.  I have my primary computer/desktop PC connected via wired connection.  I also have several wireless clients (laptop, iPad, iPhones, etc.).  All have been performing normally.  However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.

It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website.  This continues as long as I'm using the desktop PC.  When I stop using the desktop, the weather bridge resumes normally.

I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it.  It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work.  I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.

On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion.  According to the settings, it can do 10 or 100, full or half.  I have it set to AUTO.

View 3 Replies View Related

Wired Through The Router Slower Than Directly To Modem?

Sep 30, 2011

was wondering if i go wired but through the router is it still being effected by the extra step or is that only going to effect wireless? asking because my wife is wireless but barely gets on, so if im about to do something intensive online would it be worth bypassing the router and plugging straight into the modem

View 2 Replies View Related

Linksys Wired Router :: EA4500 - Wired Connections Have Long Ping Times

Sep 23, 2012

I purchased and set-up the EA4500 on Thursday.  Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues.  Connected directly to modem I get normal ping times on whichever computer is connected.  When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms.  They are all over the place 30ms (I can live with that), up to the 900's.  I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference.  I did end up doing a hard reset on the router last night after I lost tech support.  We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
 
It was so slow on my work computer, a pint to yahoo timed out.  The computers connecting to router are
 
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP

View 5 Replies View Related

Linksys Wired Router :: E2000 - Security Wired Ethernet Connections

Sep 19, 2011

I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive.  I am planning to allow a tenant in another building connect via an ethernet cable connected to my router.  Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router?  I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.

View 1 Replies View Related

Linksys Wired Router :: E4200 No Longer Accepts Wired Connections?

Oct 11, 2012

My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.

View 2 Replies View Related

Cisco :: Subnetting Directly Connected Networks?

Feb 29, 2012

Why isn't it possible to make following configuration:

View 9 Replies View Related

Ping Command On Two Directly Connected Computers?

Jan 16, 2012

if you have two no of win 7 computer , and you run ping command at the same time at both PCs but the successfull at only one PC , second computer shows unsuccess full ping

View 2 Replies View Related

Cisco Firewall :: NAT To IP Address Not Directly Connected To PIX 515

Mar 27, 2012

Can an ip address be NAT'ed to an ip address on a PIX 515 which isn't an ip address of a network directly connected to an interface on the PIX?
 
Specifically, can a host with an ip address of 150.140.102.3/26 which is connected to a network whose PIX firewall interface is 150.140.102.1/26 be NAT'ed to an ip address of 150.90.70.1/24 which is not a ip address of an interface that is directly connected to that same PIX 515?
 
I've attached a PDF depicting the network topology and describing the above.My first response to this question is that it can't be configured to do this, but need either a confirmation or correction to this.

View 2 Replies View Related

PS3 Doesn't Recognize Connection When Connected Directly To Modem

Jan 15, 2012

I usually connect my PS3 to a switch which then goes to the BuT Home Hub and it works fine. However, I want to connect the PS3 directly to my Hub but when I plug it in to the Hub, it doesn't connect to the internet at all. Is there something I have to configure in order to get it to work?It is a PS3 160 GB Slim with Firmware 4.0.

View 2 Replies View Related

Cisco Wireless :: AIRCT5508-K9 Client Seems Directly Connected To WLC

Jan 14, 2013

i'm using WLC AIRCT5508-K9 software version 7.3.101.0, ISE, cisco prime infrastructure 1.2 (1.2.1.012), and using Odyssey access client manager all running well but here the problem, when a user connected to our SSID, the status of connection information especially on access point.. there appear that "Access point : WLC2-ISC-JKT-GCC".that is the WLC not the access point, is there any miss configuration from me..

View 5 Replies View Related

Cisco WAN :: 2800 Can't Ping Directly Connected Devices

Mar 28, 2013

I'm trying to configure a 2800 series router. .I'm consoled in and put a basic config on the router (see attached). After putting this basic config on, I plugged it into a small unmanaged switch, changed my laptop's IP and plugged it in the switch also. I can't ping the router from the laptop and vice versa. This is the second switch I've tried this with, so it must be.The first switch, I installed at location, connected a cisco cable to it and a local server, so i could remote in and finish configuration. In that scenario, I had plugged the switch into a managed switch and had the same result as I'm getting now--can't ping IP addresses (can't ping the switch's IP, not can it ping local IPs).

View 2 Replies View Related

Cisco WAN :: 4500 Not Pinging Directly Connected Devices

Nov 3, 2012

We had a problem where a 4500 would not ping directly connected devices dispite being able to telnet to them and also view them in CDP. It was mostly forwarding packets between devices but some hosts could not connect to others.

View 1 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR741ND Drops All Connections (wired And Wireless)

Mar 31, 2013

Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.16.4 Build 130205 Rel.63090n
ISP : Fibertel

My TL-WR741ND is about 1 year and a half old, it was working fine until about 2 weeks ago. I need to reset it, times between resets is not consistent, meaning, it can take 30 minutes, or 8 hours, but it needs to be reset. Right now, there are 2 wired connections (PS3 and Desktop PC) and 7 wireless (4 cell phones, 2 notebooks and 1 netbook). 1 of the notebooks has static IP, and it also has a VM running, with another static IP. Also some port forwarding simply stopped working (ports 80 and 1180), the rest of the ports work flawlessly, but trying to forward the port 80 and 1180 (to the 2 static ips) won't work. I already upgraded the firmware, and the problem persists, also changed the channel (from 6 to 1, and then from 1 to 11).

Installing dd-wrt/openwrt/gargoyle or anything like that, is not an option. The only reason why I bough t this router, was because I could use dd-wrt, I installed it 1 year and a half ago, and it simply sucked, the wireless bandwidth was non existent, and it was a headache. I installed it again last week, to see if it could be a solution, and I was not even able to save changes in the control panel. I need a real solution, and installing a firmware that works only on chrome is not an option (specially when I use Firefox, and I needed to install chromium just to erase dd-wrt)

View 2 Replies View Related

Cisco Infrastructure :: 2 6509-E Switches Connected Directly To Each Other While Using VRF-lite (Sup 2T)?

Apr 11, 2013

I am trying to test (if possible) the idea of having 2 6509-E switches connected directly to each other while using VRF-lite (Sup 2T). The idea is to have 3-4 separate networks. For example Net-A, Net-B,Net-C, Net-D. There is no PE router*, just these two switches. Also, there sin't any other access layer switches. All users connect directly to the 6509-E's via switch 48 port switch blades.  
 
Net-A and Net-B on separate VRF's, but able to talk to each other. Net-C and Net-D* on separate VRF's without being able to talk to any other. Net-D* will have a PE since it comes from an external network. This is something I would like to test in a lab environment, but I am not familiar with VRF's.

View 1 Replies View Related

Cisco Wireless :: Access Points Are Directly Connected To 2016 WLC But Not Functional?

Jul 17, 2012

access points are directly connected to 2016 wlc.Event log from the wlc
 
AP event log download completed.
======================= AP Event log Contents =====================
*Mar 1 00:00:30.157: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:30.161: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:30.190: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:30.191: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

[code]....
 
but still access points are not functional ?

View 17 Replies View Related

Cisco Switching/Routing :: 3560 / ISR 2911 - NAT Of Network That Is Not Directly Connected

Dec 1, 2011

I have a CAT 3560 connected to a ISR 2911 The 3560 has 2 subnets ( 192.168.1.0 /24 and 10.10.10.0 /24)  The 2911 has interface GigabitEthernet0/1 on the 192.168.1.0 /24 and another GigabitEthernet0/0 on a WAN connection 172.16.7.246 I need to NAT both the 192.168.1.0 /24 and the 10.10.10.0 /24 to the single address 172.16.7.246 I have to use route-maps .  I have IPSec VPN's and ZBF on the 2911 My problem is the NAT does not work for the 10.10.10.0 /24 network!Why?is my only option to use trunking  between the 3560 and 2911 and subinterfaces on the 2911? I want to avoid sub-interfacing.

=============================================================
On the Cat 3560=====================!vlan 40name the 192.168.1.0 /24 subnet!vlan 60name the 10.10.10.0 /24 subnet!interface FastEthernet0/7description Connection to Router Gig0/1switchport access vlan 40!interface FastEthernet0/16description Connection pc host on the 10.10.10.0 /24 subnetswitchport access vlan 60!interface Vlan1no ip address!interface Vlan40ip address 192.168.1.4 255.255.255.0!interface Vlan60ip address 10.10.10.10 255.255.255.0!ip classlessip route 0.0.0.0 0.0.0.0 192.168.1.1
 =========================

The host on the 10.10.10.0 /24 network has the 10.10.10.10 address as it's default gateway The host can not access the WAN thru NAT....

View 3 Replies View Related

Cisco Switching/Routing :: VPC Pair Of Nexus 7K And Servers Connected Directly

Jan 9, 2012

My Data Center has one single core switch where is connected several servers, one port is the link to the router wan and other port is the link to the FW, my boss wants to install 2 nexus in order to replace the single switch. All my network has only one address, for example 192.168.10.0/24 if I connect two nexus 7010 in VPC and Domain, each nexus is going to has 2 modules with 48 port 10/100/1000 rj45 and i wan to connect servers directly to each nexus, with this figure i'm going to have a group of servers connected in two different nexus, Do they can have the same network 192.168.10.0/24 considering that the nexus are in the same vdc and vlan and have only one gateway for both groups? If the answer is positive, which nexus would be the gate way for that address, the primary or secondary? Or i must have a different address for both group of servers, i mean for example 192.168.10.0/24 and 192.168.12.0/24?thus each nexus would be the gateway for that new address?
 
To have two nexus connected by VPC in a Domain mean that one computer connected to one nexus can share the same address or vlan with other computer connected to the other nexus????

View 2 Replies View Related

Cisco Switching/Routing :: 3750X - VTP Not Working With Switch Not Directly Connected

Sep 9, 2012

We have a 3750X VTP Server and the rest of the switches are clients.
 
Due to cabling issues, we have a switch (Switch F) that we can't connect directly to the 3750X so we have it connected through another switch. Everything is set to VTP client with the correct domain and password but this not-directly-connected switch isn't receiving any VTP VLANs.
 
Anything I need to do on Switch D so that Switch F can receive the VTP updates?

View 3 Replies View Related

Cisco Switching/Routing :: 3750 Receiving CDP Packets From Switches Not Directly Connected

Jun 27, 2010

A specific switch port which happens to be part of a 2 switch 3750 Switch Stack is seeing multiple CDP packets from 3 extra switch port interfaces that are not directly connected. Noteworthy is that the far end devices have the correct CDP entries and I physically confirmed at least two of those connections that lead to the switch "upstream to the culprit switch". Tricky part is that its production so room for maneuvering is limited. At some point I disabled all Ports save for the real uplink and the problem momentarily disappeared. Re-enable the interfaces problem resurfaces. Is there an explanation, technique to eliminate the culprit with minimal disruption?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved