I can't get the email to work from the router. It worked flawlessly for weeks then stopped working. I verified that the outgoing settings are still valid and that my antivirus is not blocking the email.
View 7 RepliesI recently set up two cameras. I had set up one for motion detection and email to a gmail account. It seemed to work fine, but then for some reason the motion detection tab didn't show the room like it did before. It doesn't show any picture or anything like it did before, so I couldn't choose the squares to choose the detection area. This is through mydlink account->camera info->advanced settings, and logging in to the camera remotely.So I switched to the other camera, and got it working as of last week. But now, the motion detection doesn't work anymore? It appears to be related to the username/password for the email account. I can no longer send test emails, it says invalid username/password, though the exact same values worked last week, and I didn't change anything. I tried resetting it, then setting it again, but no luck.
View 5 Replies View RelatedI've switched internet provider from Verizon DSL to Comcast cable just a month ago. Since that time my wife can no longer connect to her work email? I've call comcast many times since the only thing that changed was provider? This is the error I get now
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I've tried explorer and taken down the firewalls, I had her school IT person remote access to my computer to see if it is on their end...still she can't connect. We can access from other computers (my work) but still not on my home computer (windows vista) Comcast now tells me not there problem since I can connect to internet? I've also changed my norton protect to AVG to see if that was an issue..
Region : Argentina
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP :
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : www.ownit.se
I recently got a new email provider with a webmail. But I can not access the email from my home network. I have tried both my computers so I suspect that it can have something to do with my router. I have also set up the new email account in Outlook and in other networks it works fine, also the webaccess works fine in other networks. It seems that the problem is only related to my home network.i have talked to my ISP provider and they say that all is opened in there network. i have tried to clone the MAC address and that did not solve my problem. I also read the one could change the MTU size from default 1500 to 1440, that did not work either.
my neighbor is having a problem with her computer, its an HP touch smart [not sure of model] every other computer in her household works [1x wired 1x wireless].
the computer in question has had repeated problems and various hardware issues and has been sent out for repair on more than one occasion all for non software related issues, i take care of software issues and diagnose hardware problems and i have done so without a hitch until now.
when the problem first started happening i would do a system restore to a point were it was working, but that does not seem to be working anymore
i have tried disabling firewalls [she uses AVG internet security edition which is on all of her computers], windows firewall, disabling and re-enabling network drivers, updating drivers, installing different and previous versions of browsers
I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.
I have recently purchased six quantities of DIR-655 for my home use. When I registered them these six product, at the end of each registration, I got the message that I will get an email confirming the registration.I didn't get any email. I have checked my email span box and filter too.
View 6 Replies View RelatedI run a mailserver behind my router. I have port 25 forwarded as a virtual server. Not always, but often enough to be annoying, the connections show as being from the WAN port on the router instead of from the real origin. Is there any way to stop the DIR-655 from doing this?
View 12 Replies View RelatedI deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam
View 1 Replies View RelatedUp to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server. However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).
The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router. That's even though I added port forwarding rules for them. The logs show messages similar to the following:
"Blocked incoming TCP connection request from 216.168.101.68:51291 to 216.168.101.68:143"
It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either. Any thoughts of what else I can try? DMZ is not an option.
I have been trying to setup my DIR-655 A4 (Firmware 1.34NA) router to send me email notifications on new firmwares, when the log is full and every Saturday. So I have a schedule already created for sending the emails on Saturday and I also have the option to send notification of new firmware checked. Now I have settings, similar to the following, under email settings.
View 14 Replies View RelatedAny way to get the DIR-655 to e-mail logs? I have all the e-mail settings set properly, but when I request the logs to be e-mailed, I never get anything. Its not in a spam folder either.I do have the DIR-655 behind a 2wire router/DSL modem. I don't know if this is the problem, but I can send and receive e-mails from my computer which is connected to the DIR-655, so I don't think that is the problem.
View 6 Replies View Relatedsetting up the email notifications. I need the log emailed to me during a certain time of the day and it wont email anything. Even when I am in the log and push the email now, it does nothing. I've tried setting it up through hotmail, lmsn live, and gmail. None of them work. What am I doing wrong or what do I need to do?
View 9 Replies View Related I've just successfully set up my network camera and as I was running through the advanced settings, what it wants from me when it comes to setting up images being sent to my e-mail. I've looked up some old threads to get a clue and thus far nothing works. Testing my entries results in "Invalid e-mail setting" 10 out of 10 times.
The setting format I'm trying to use is as follows:
-- smtp.gmail.com
-- 587
-- myemail@gmail.com
-- myemail@gmail.com
-- myemail
-- mypassword
-- STARTTLS
My GMail account is POP Enabled (whatever that is) and I used the username for that e-mail for bother the Sender and Receiver fields, as well as that e-mails username and password.
I'm lost. I bought the camera so I could document my landlord's maintenance people "touring" my apartment while I'm at work, but I wasn't aware having it save screenshots would be so complicated.
DIR-655(A3) 1.33NAb02_HNAP_beta I used to be able to send notifications on log full etc... When my ISP was still allowing outbound email w/opt out of block on port 25. This worked on my old DI-524, and used to work on my DIR-655.In an effort to clamp down on spam my ISP formerly SBC now AT&T began requiring SSL. Secure Authentication is not required. With the ever increasing concern for controlling spam DLink really needs to get in gear and provide the support customers need and back the efforts of ISP's to control spam. Otherwise it's wasted code occupying space. On that note if space is a concern, need space for the code ~ throw SecureSpot out !
[URL]
On the Outgoing Server (SMTP) Settings window click Edit and verify:
# Server Name - displays smtp.att.yahoo.com.
# Port - displays 465.
Note: When updating the secure server settings, check SSL checkbox first to update the port setting.
* Under Outgoing mail (SMTP), the box next to server requires a secure connection (SSL) is checked. This works flawlessly with Thunderbird and other mail clients therefore it is clearly a shortcoming of the firmware on the DIR-655 i.e. no SSL? This is totally inadequate.
DIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
Router does not accept any email address that start with a number. For example, if you want to set email address 1abcd@efg.com in the from field you will receive the following error: The given FROM address (1abcd@efg.com) is invalid. Same error if you use it in the to field.HW ver. A4 running firmware 1.35NA.
View 5 Replies View RelatedRegion : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
I have a WR842ND with firmware 3.12.22 Build 120424 Rel.39632n. I can't seem to get the mail log emailed out. I've tried hotmail, gmail and ISP email ids. I know these will work as I've done it with my NAS and other routers. When I'm in the System Tools/System Logs/Mail Settings I have authentication enabled and I know I've put in the proper information including mail server outgoing mail names EG. smtp.live.com for hotmail.
I don't see any place to identify a non standard port IE. not port 25, to use. So when I try to send I get the Userid or password is wrong message. Do I have to configure something else.
I cant receive my email through windows live mail since i goit my router (i just got this problem with my hotmail account tho gmail work properly)
View 11 Replies View RelatedI have a DIR-825 since a couple of days, Hardware version B1, firmware 2.01EU (date Fri, 12, Jun, 2009 = latest european firmware) Have portforwarding for ports 25, 80, 443, 143, 993 via virtual server to a local linux server (192.168.0.3)
My (SIP protocol) VOIP phone (192.168.0.100) does not work anymore since I use this router. It worked fine on my old WRT54G. The phone logs-in normally at the voip provider but when I make a call, it seems that the ports are not forwarded or are blocked by the firewall. I have tried to manually setup portforwarding and virtual server instead of portforwarding.
I have tried many things, from disabling QOS, SPI, end point filtering and more but it does not work. I have also programmed DMZ for my ip-phone, but it does not work. Nothing found in the logfiles about frame drops. (I have setup a syslog on my linux-server)
There seems to be a bug causing frames dropped, as my setup has always worked with my WRT54, and should work with DMZ set, but it does not. The same setup works fine on a DIR-655 of a friend.
When a friend sends me an email with a link to click on when I click on ther link a blank page pops up with the words "404 not found". Why does this happen and is it a big problem. This problem just started to happen a few weeks ago. I never had a problem whenever a friend sent me an email with a link to click on.
View 6 Replies View RelatedIs there any way to change the subject line of the email alerts that are sent? Right now mine are coming with the MAC address, date and time. I would like to remove the MAC address and date and time so that I can sort them into one folder when I sort my email by subject.
View 7 Replies View RelatedI'm hosting my email on an Exchange Server 2003 box and have my laptop (Vista Ultimate 32 bit) setup to connect to the exchange server for my email. This works fine through a LinkSys RV042 in one location and a LinkSys WRT54GC in another, but fails through the DIR-615 B2 (2.24 firmware) at home. I'm guessing it's blocking something needed for the MAPI connection.
View 2 Replies View RelatedRegion : New Zealand
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP : Telecom New Zealand
getting the MR3420 but will be using a ZTE 669 Turbo stick as the modem ISP Telecom New Zealand.I did notice that they seem to be supporting the ZTE 668+ which I'm guessing is a vary similar model.
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Celcom
Isn't MR3040 is supposed to work without battery with just AC power? Mine works fine with battery but without battery it keeps on restarting..
the 942L is up and running but I ain't getting no email snapshots nor video clips.I think the menu for setting up the "Video Clip" and "Snapshot" is severely lacking info for users like myself; what to type in the smtp field, the sender or recipient email fields, and especially not username and password. Do I put my email username and password there, or my MyDlink login email and password?
View 1 Replies View RelatedOn my new 942l, after 5 days of usage and tinkering with various settings, I cannot get the camera to obey the trigger=motion when configured to send snapshots over email. It does work when configured to send snapshots over email with trigger=always.Interesting enough the trigger=motion works just fine to upload snapshots to FTP. Yes, it uploads the pictures correcty on FTP detecting correctly movements, but it would not send those over email. To me it looks like a bug in the firmware that I have now a 100% repro.Are there any logs you want me to send to you for debugging?And : Is there a known workaround I can apply (reboot, resetup etc)?
Detailed description of the problem:I have setup the camera to upload snapshots to FTP AND send them over email for trigger=motion.This is what works : the snapshots are nicely uploaded on FTP , but not sent over email.Interesting : if I set trigger=always, snapshots will both be uploaded to FTP and sent over email. The moment I switch back to trigger=motion they go only to FTP and not over email.Even more interesting : the video clips work correctly with either email or FTP for trigger=motion.
What could cause this?The email (account, port, password) and FTP settings are definitely not a problem since I see pictures/videos in email or FTP with trigger=always.The motion settings are not a problem either since snapshots upload correctly on FTP when movements are detected.What it apears to be is the software is not reading or obeying correctly a certain combination of settings.I'm wondering if it has to do with the fact that for video clips the "email" and "ftp" are exclusive, but for snapshots they are allowed simultaneously. And somehow the logics get mixed up causing certain combinations of settings to now act out?
What else I tried?I tried many reboots, unplug followed by plug back in and so on.I tried saving and restoring the settings to/from a file hoping that will "reset" something.And I tried many combinations of settings, including changing the order I set and unset hoping a different code path that works will be hit.I did not try a restore to factory defaults since I installed the camera in a hard to reach place and if I restore to factory defaults i need to take it down connect it to a cable in order to redo the wifi settings.
A friend of mine has given me a D-link DIR-615 Wireless Router. I only have a copper 10 meg ADSL service. The Router Internet socket is an RJ45, the ADSL Filters are RJ11. Is it possible to get this router to work on an ADSL Filter ? Can you get ADSL Filters with both an RJ45 and BT Phone connection on them, or a converter lead which converts RJ45 to RJ11 to work on the current ADSL filter?
View 5 Replies View RelatedRegion : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Cellcom 3g - Israel
My USB Modem HUAWEI E173 not work as well with TL-MR3420 Its lose Identify every almost 15 minutes , and try to Identify again and some times not successfully until I reboot the unit . then its Identify successfully , after some minutes the problem happen again and again . I think its from the router software issue that it have not the correct driver of the modem .
also , the signal of the wireless not that good like the other routers which I used before .
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version : latest
ISP :
I have problem to get pptp working. I setup pptp VPN server on my home router and configured pptp dialup on my laptop. If my laptop connect to internet directly, I am able to connect to home router via PPTP VPN. However, if I connect TL-MR3020 to internet(wired) and then connect my laptop to TL-MR3020 wirelessly, I can browse internet without problem. The problem is I cannot connect to home router via PPTP VPN any more. I believe the problem is on TL-MR3020.
I have the following network setup. I have a dynamic IP address from my ISP. I connect my fiber to a D-Link DIR-645 and set up my wireless network. The coverage is kind of poor in my son's room so I use a D-Link Powerline Homeplug 501AV to extend internet to my son's room. I connect one Homeplug to the DIR-645 and set the other Homeplug in the power outlet in my son's room. It works if I connect his PC or Xbox via an ethernet cable to the Homeplug in his room. Since he has both PC and XBox I have connected a D-LINK DIR-100 to the Homeplug and have two ethernet cables connecting to his PC and Xbox. Here is the problem. I don't get an internet connection to the DIR-100.How shall I configure the two routers to work?
View 1 Replies View RelatedRegion : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : TL-MR3420_V2_121206
ISP : 3
I am using a MR3420 V2 together with a E398 modem. The connection works well, but I can't do any port forwarding (virtual server). Using another router (Tiny Dovado) with the same E398 modem works flawlessly to forward ports.
Region : Peru
Model : TL-MR3040
Hardware Version : V1Firmware Version : latest
ISP : Movistar
Is there any chance to make work HUAWEI E303C with MR3040?I know this model is not in the compatibility list, but when I try connect this modem with the router, it can be identified but it cant be connected. On the logs it appears that there is a problem with dial, APN, but I'm sure I'm introducing the correct values?