D-Link DIR-655 :: FW V.2.00NA - HW V.B1 Won't Push Forward Into Year 2013
Apr 14, 2013My D-Link DIR-655 with FW v.2.00NA, HW v.B1 won't push forward into year 2013. What is the resolution for this model
View 1 Replies
ADVERTISEMENT
D-Link DIR-655 :: Hardware Revision B1 Firmware 2.00NA?
Apr 7, 2013I have a router with the specs in the subject area. I have a weird problem with my DIR-655 router when saving "daylight savings time." Now, the time is correctly set and one week later, the time reverts back to non-daylight savings time.I am currently syncing my router's time with an ntp server (Cornell in NY). Is this a known bug? I definitely don't want to update my firmware as I like its performance. This is the only issue I want fixed.
View 1 Replies View RelatedD-Link DIR-655 :: Keep Losing Wireless Setup On Firmware 2.00NA
Oct 2, 2011In the last two weeks I've been losing wireless connectivity at least once a day. Today it occurred twice. The way that I resolve the problem is by wireing-up, loggin into the router and essentially just resaving the wireless settings (url...) without changing them. Then I'm good to go for about 12 hours.
[code]...
TP-Link ADSL2+ Wireless :: TD-W8951ND / WPS Push-button Configuration Does Not Work
Apr 8, 2013Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : TD-W8951ND_v5_120522
ISP : N/A
The wireless adapter settings page has an entry for 'PIN' and 'PBC' for WPS.Selecting either always results in the client station requesting the routers pin, indicating that the pushbutton selection is not working properly.The router was doing this with the version of hardware that it was shipped with. i have downgraded to 120522 and the router is behaving exactly the same.Has anyone successfully configured the router for pushbutton connection? do not suggest that we use the pin setting as we have a requirement for dumb devices to connect to wireless and they only support pushbutton connection.
Security / Firewalls :: No Internet After Upgrading To Kaspersky 2013?
Jan 28, 2013Found the internet not working after upgrade of versions. Managed a work around by disabling KAS2013 Firewall settings and using MS Firewall. (desktop)
This is not the correct way of config and as my laptop works fine with KAS2013 firewall enabled.
I checked system IP ...ipconfig settings and wonder about matching up gateways??
Cisco Application Networking :: ACE 4710 Need Feedback For Exchange 2013
Apr 26, 2013Any info about Exchange 2013 and ACE SLB functions. I know they changed to RPC over HTTPS on exch side and few other items changed as well. Any feedback from a production deployment.
View 1 Replies View RelatedCisco Switching/Routing :: 48VDC Power Supply For 819 4G LTE Router In Q1 2013?
Dec 14, 2012clarify whether this statement found after table 4 of the Cisco 819 4G router data sheet truly means that there will be a power supply to support 48VDC in Q1 of 2013? Here is the statement:
"* Future external reference for 24V, 52V, and 72V DC for railway applications Q1CY2013"
Here is the data sheet source:
[URL]
I would want to power this router from a -48VDC plant, which is common at remote telecom sites.
D-Link DIR-615 :: Can't Forward Ports
Nov 13, 2011I can't get port forwarding to work, even when I turn off the Windows 7 firewall and AVG anti-virus software I'm running. I entered the IP address of my laptop (with a DHCP reservation) and UDP and TCP port numbers, with Schedule set to Always and Inbound Filter set to Allow All. That should be it, right? However, when I check the ports using PFPortChecker, both the UDP and TCP ports are blocked. I do have a Linksys wireless router daisy-chained to the D-Link router, but I'm not communicating on this computer through the Linksys router and the problem still occurs even when the other router is disconnected, so that doesn't appear to have anything to do with the problem. I just updated to the latest firmware (3.13NA).
View 11 Replies View RelatedD-Link DIR-655 :: Can't Port Forward Or Use DMZ
Jan 10, 2011I can't get any type of port forwarding or DMZ to work with this router. I've checked for double NAT, have a static router IP etc.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
D-Link DIR-655 Can't Port Forward Or Use DMZ
Jan 9, 2011I can't get any type of port forwarding or DMZ to work with this router.
I made sure to check everything in the sticky before I posted and it all checks out.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
D-Link DIR-655 :: Cannot Forward Port 3390
Aug 20, 2011-hardware: A4
-firmware: 1.34NA, 2010/04/16
-Cable ISP service
-Cable modem without built in router
-wired connection
-Qos is disabled
-I have tried port forwarding and virtual server
-3389 is forwarded fine
I cannot forward port 3390 anymore and I do not remember changing anything. I am trying to forward port 3390 b/c I already am using remoted desktop on another machine using port 3389 and it works fine. It is not the machine b/c I change port forwarding machine using 3389 and it works fine, but I need to have 3389 and 3390 set up.
D-Link DIR-655 :: Can't Port Forward Or Use Virtual Servers At All
Mar 5, 2013I just bought this to replace a working Linksys but wanted gigabit so after reading a lot of reviews this is the one I picked up. So tell me what is the magic toggle to get port forwarding to work or virtual servers? I've configured them on Linksys, netgear, Cisco, etc 100 times with no problems. Nothing I configure on this confounded thing works. I've setup 6 port forwards, RDP, FTP, VNC and none of them work. Nothing. "Connection timed out" when trying to connect. This works on my other router just fine so its not my software, or my PC configuration as they have no changed. Ports are correct.
View 2 Replies View RelatedD-Link DIR-601 :: RDP Port Forward With Hardware Version
Mar 25, 2012DIR-601, Hardware Version : B1, Firmware Version : 2.00NA.Trying to open up port for RDP (3389) to WinXP machine (tried with DHCP and with static IP on XP workstation)Tried both Virtual Server (3389 to 3389 and other port numbers to 3389) and a simple Port Forwarding (3389 TCP). Both methods work correctly for about 15 or 20 minutes, then the router blocks traffic on the opened ports.If I delete the virtual server/port forward settings and recreate it will again work for about 15 or 20 minutes.Even tried creating my own schedule (although I would be quite happy with always)
Also can't find a link for the 2.00NA firmware to attemp a reflash, I have only be able to find firmware for the HWverA unit. (other than the wrt stuff, is there any other firmware for the B1 unit?
D-Link DIR-655 :: RevB Will Not Port Forward On PPPoE WAN?
Jul 10, 2011After I am on with Tech Support for 2 hours, they say the router is defective and will not work for Port Forwarding....!!
I have installed these in many locations and have not had a problem. ALL sites had a DHCP WAN.
I have PPPoE here on FIOS, with a great connection, no issues for 4 years. But lately my Intellinet Router has had to be reset 2-3 times a day, so I replaced it with the DIR-655 RevB.
Well, only for a little bit. The Dlink will NOT Port Forward... I need it to look at cameras, Remote Desktop, etc. Tech Support and I tried PF, and Virtual and DMZ with no luck. we tried many ports, with several internal IPs.
I have another DIR-655 in stock and it has the same results...
If I plug the Intellinet back in, all Port Forwarding works fine... no problem at all to any port. BUT it still has reset issues (not related to PF...)
Anyone else have PPPoE out there, with Port Forwarding issues?
I wrote Tech Support to notify me if they ever fix this glitch, and they sent back the instructions for Port Forwarding! Do they even read what we type?
D-Link DIR-615 :: How To Install Security / Forward Update Through IMAC
Apr 26, 2011I have DIR-615 h/w: c1 f/w:3.01. I can't figure how to install security or f/w update through my imac.Do I need to use a cable connection?
View 1 Replies View RelatedD-Link DIR-655 :: How To Forward Requests To External Http-Proxy
Nov 23, 2011Goal: To forward requests over port 80 from my LAN to an external server on a specific port, that is I would like to forward all requests over http to an external proxy.
I know that this can be done with IP-Tables, but I would like to do the same thing with my D-Link. I have looked at Advanced --> Routing, but that seems to be specifically for inbound requests. I want to do this for outbound requests. This can be achieved with the D-Link DIR-655?
TP-Link 300Mbps Wireless :: TL-WR1043ND - Way To Forward Port For NAS
Apr 10, 2013Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : Titanadsl
My router is a TD W8960N v3 which isn't listed here.I've connected a Synology 110j to the router and need to sort out the port forwarding which I'm not much good at. I am finding the TP Link documentation. I did find the page on DMZ but I don't know what that is.
TP-Link 3G/3.75G Router :: TL-MR3220 Forward Dynamic DNS Not Working?
Jan 10, 2013Region : Portugal
Model : TL-MR3220
Hardware Version : V2
Firmware Version : TL-MR3220_V2_121126_UK
ISP : OPTIMUS (26803)
I buy a Router TL-MR3220 and Forwarding e Dynamic DNS not work. I installed the latest firmware version (TL-MR3220_V2_121126_UK) and does not work well.
Cisco :: LMS 3.1 Not Able To Fetch Or Push Configuration
Apr 21, 2010Using LMS 3.1 in win 2003 SP2. Recently experiencing a problem, not able to fetch/push config for the n/w devices. I deleted and re added the device to lms and found able to perform the task. There was no connectvity issue during the problem.
View 6 Replies View RelatedCisco VPN :: WRVS4400N - Need To Push 2 IPs Through Tunnel
Mar 14, 2011I have a VPN tunnel with an WRVS4400N (teleworker) on one side and sonicwall firewall on the other. I need the telework's router to know to push two ip's through the tunnerl, 9.19.178.( ) and 172.20.0.( ). It looks like when you setup the tunnel you can only do one. The tunnel does work with 9.19.178.( ) but how do I tell the router to also push 172.20.0.( ) traffic through the tunnel as well?
View 1 Replies View RelatedCisco :: What Module Is Used To Push Configurations In LMS 3.2.1
May 20, 2012What module is used to push configurations in LMS 3.2.1?
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: Port Forward Through TD-8817 Modem > TL-WDR-3600 Router > PC?
Mar 13, 2013Region : Ireland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Smart
I have
A TP-Link TD-8817 Modem with IP Address 192.168.1.1
A TP-Link TL-WDR-3600 Router with IP Address 192.168.0.1
A PC with IP Address 192.168.0.100
I figured out that I can only enter an IP Address with the range 192.168.1.* when port forwarding on the modem, ie I cant enter 192.168.0.100 for the PC.Is there any way of Port Forwarding to the PC?
Sharing :: Push Updates For MS Security Essentials?
Sep 20, 2012My organization has about 15 workstations, all running XP Pro. Our server is running MS Server 2003.Is there a way to push Security Essentials definition updates to all these machines behind the scenes, rather than having each one download the updates individually?I would like to automate the process, if possible, so that once a week the update file is downloaded from MS update, then applied to all workstations, but I don't know where to begin.
View 6 Replies View RelatedDell :: Cannot Connect XPS L502x To Netgear Push 2TV
Jan 27, 2012I could not connect my xps l502x to NETGEAR PUSH 2TV. I GET A MASSAGE SAYING CAN NOT CONNECT
View 2 Replies View RelatedCisco VPN :: 1921-SEC (ISR) / How To Push Route To Client 5.0.x / Change To TCP
Apr 20, 2011We are using a CISCO1921-SEC (ISR) with IOS 15.1 and we configured a "crypto isakmp client configuration group". We can connect with the "Cisco System VPN Client Version 5.0.07.0410" via IPSec/UDP.
1. Is it possible to push routing informations to the System running the VPN Client ? A the moment all traffic is routed to the tunnel but we like only one route to the network permitted with "pool ..." in the "crypto isakmp client configuration group NAME" section.
2. We searched for changing from upd connection to tcp connection via special port. Is it possible with IOS 15.1 on the CISCO1921-SEC ? Is there something possible like "iskamp ipsec-over-tcp port 10000" ?
Cisco Infrastructure :: Push Button On Nexus 7010?
Jun 25, 2012I saw a push bottom below the fan module of the nexus 7010. What that is for?
View 3 Replies View RelatedCisco Wireless :: Push Access Points To Second 5508 Via HA
Aug 9, 2012I am having an issue here. I have 2x 5508 that each have 100 AP license and a little under 200 access points. Basically all of the access points are using DNS to connect to the primary controller that has the DNS entry. Basically half of my access points need to be on the second controller and in order to do this I have been using the high availability mode of each access point to push them to the second controller IP address.It was working perfectly until now. I have pushed 28 access points to the second controller and the last two I need to push at this location just keep resetting on the primary controller. Neither controller is configured as master controller.
View 4 Replies View RelatedCisco :: Using Advanced Baseline Template To Push Change LMS 3.2.1
Oct 13, 2011LMS 3.2.1, what is the correct baseline template syntax to accomplish the requirement 2:
Requirement 1
• Check if the router is running H323: You can do it looking for the command “h323-gateway voip interface”. If that command is found on a router then it is an H323 voice gateway
• Configure the global command: voice class h323 1
[Code]...
Linksys Wireless Router :: WPS Push Button On WRT610N Does Not Work?
Mar 28, 2012I am facing problems of the WPS Push Button on the Linksys WRT610N version 2.0 router which has stopped working. I don't see the Blue LED blinking. The WPS button no more works on the router. It was working before. I did a firmware upgrade. Could this be the cause?
View 4 Replies View RelatedCisco Firewall :: Exchange Direct Push / ASA 5540 / Barracuda?
Jun 15, 2011I have the following scenario.
INET
(205.50.50.1)
|
|
(205.50.50.2)
[CISCO ASA 5540]
(10.10.10.1)
|
|
+ ---------------------------------------------+
(10.10.10.2) (10.10.10.3)
[BARRACUDA] [Exchange SRV]
Mail Domain: mail.domain.com (205.50.50.50)
Ok so the mail flows to the Barracuda using a static 1:1 NAT configuration and then gets delivered from the Barracuda to the Exchange server. I want to implement active sync (Direct Push) for Windows mobile devices. They need to communicate with mail.domain.com over port 443. The problem is I want mail to continue to flow to the Barracuda, but direct Direct Push traffic to the Exchange server.I cnow I can't implement two 1:1 NAT mappings from the same external hostname to 2 different servers.
Cisco :: 4400 - Push Network Time Out To Access Point
May 8, 2011We have 30+ wireless access points controlled by a Cisco 4400 Series WLC (mostly AP1231's and some AP1242's). The WLC's system time is set by a network NTP server and is correct. However the APs clock is an hour behind that of the controller.
View 3 Replies View RelatedCisco Wireless :: WLC5508 - Push Same Configuration On Multiple APs In 1 Shot?
May 1, 2013is there a way on a WLC5508 to push the same configuration on multiple APs in 1 shot?I need to change the High Availability settings on most of the APs (not all). And the only solution i find is to do 1 by 1...
View 6 Replies View RelatedLinksys Wireless Router :: Bricked EA4500 After Push Firmware Update?
Jun 27, 2012just to relieve a little those who complain for the loss of functionalities/control caused by the new firmware, I want to let you know that yesterday evening when I came back home the router was bricked. After more than 2 hours of tests with the online support, they ended up the device has to be replaced.To add insult to injury, I ALSO HAVE TO PAY to ship my router to Cisco warehouse. I couldn't believe my eyes... It's not for the 10 bucks it costs the shipment (even if 10 bucks are much better in my wallet than in Cisco's), but I already spent around 300 bucks less than 2 months ago to buy the two devices and now I have to pay to fix something I have not broken.
View 4 Replies View Related
