i had the dir-655 with desktops and laptops running with xp and win 7, also some other devices such as ipod, iphone, ps3, xbox, problem occura with conflict of network ip address, i think xp and win 7 both login with the same network ip address. So I start to disconnect every device and try to connect each desktop and laptops, one by one, enabled the DHCP and reserve the network ip to avoid conflict. But here's the problem, when I connect the first computer with wired to the dir-655, can't find the computer in the DHCP list so I cannot do the reserve, I'm able to surf internet even I can see info with ipconfig. So I connected 1 wired and 2 wifi to the network, only 1 wifi network ip showing on the list, so I reserve that one, but after I refresh, the DHCP list is empty.
I am unable to remove an access list. Currently this this access list contains 4 lines of remarks. I was unsure if I was entering the command correctly and now I have 4 lines of "trash" that needs to be removed.
Symptoms: The "sh run" command shows that I have access-list 100 defined. The "sh access-list" returns nothing.
Process I have tried: config t no access-list 100 no access-list remark Test (just trying anything at this point) clear configure access-list 100 (This returns "Invalid input detected at '^' marker" and the '^' is under the 'e' in clear.)
So the "clear configure" command is not working. The "no access-list" commands does not return an error but does not remove anything. What step am I missing? Let me know if I can provide any more information.
I have been trying to figure out a NAT issue on my 2811 and the inspect engine.I have 'ip inspect FW out' on my outside interface. If I turn it off, I also have to remove the access-list applying to inbound traffic on that same interface. Why is that? This whole thing centered around SIP registrations from devices on my LAN to my provider. The provieder is showing that I am registering from a high end port (1024 or something crazy). He said that it sounds like some type of SIP ALG or something on my router. For the life of me, I can't figure out what would be causing it. I am just using a standard route-map that points to the outside interface using 'overload'.
another computer is connected to my home network, and i want to remove them as i don't know who it is. I also notice my files have been very recently shared within the 'homegroup'. i have not personally done this.is someone accessing my computer?
Tech Support Guy System Info Utility version 18.104.22.168 OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: AMD Sempron(tm) M120, AMD64 Family 16 Model 6 Stepping 2 Processor Count: 1 RAM: 1788 Mb Graphics Card: AMD M880G with ATI Mobility Radeon HD 4200 , 336 Mb Hard Drives: C: Total - 224515 MB, Free - 125199 MB; D: Total - 13654 MB, Free - 2267 MB; F: Total - 101 MB, Free - 95 MB; Motherboard: Hewlett-Packard, 363F, 42.15, Base Board Serial Number Antivirus: Microsoft Security Essentials, Updated and Enabled
i have a computer that is on my home network that i am trying to disable. the person no longer lives with us and it is still showing that there computer is connected to our WiFi ? our internet provider is At&t.
My main computer is a desktop PC, which is in my upstairs study. It is connnected wirelessly to the internet, and the Virgin router is downstairs in the living room. This has worked perfectly for 2 years. The computer uses Windows 7 ultimate. (COMPUTER 1), I recently purchased a laptop (COMPUTER 2) and installed Windows 7 ultimate. This uses the same wireless connection and at first I had no problem setting up a homegroup so that I could watch videos stored on Computer 1 on the laptop. The first problem is that the homegroup stopped working some time ago and when both computers are switched on, I get the message on both computers: "no other homegroup computers are currently available."
I figured I could leave the homegroup and start again but if I try to leave on either computer I get the error message: "Windows couldn't remove your computer from the homegroup." In services, both the Homegroup settings (listener and provider) are started, as are the peer networking options. I have tried disabling them and re-starting to no avail. Now, this hasn't been a major problem because I have still been able to access files on Computer 1 via Computer 2 by clicking on network>Computer1>user. But here is where it gets complicated. I have now purchased another desktop PC (COMPUTER 3) which I intend to place in the living room and connect to my TV, so that I'm not constantly connecting wires from my laptop (computer 2) if I want to watch something on the big screen. Again, Windows 7 ultimate installed.
I just started having this problem yesterday. I was experiencing weird downloading/internet browsing issues and couldn't figure out what the problem was. I started looking around my router settings and noticed that in my DHCP Client list, my computer isn't in it. The router is hooked up to the computer, so it's not wireless. My phone and my girlfriend's laptop are listed, but the main computer isn't. It's especially causing problems with port forwarding. Downloads will stop because the port isn't showing as open. I'm running 64 bit Windows 7 and a Belkin N+ Wireless Router, model F5D8235-4.Firmware is up to date.
I recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
When I browse or surf the internet with my computer, it causes the router to stop working on all devices connected to it. This includes my laptops, iphone, ps3 and other desktop. However, if I or anyone else connected to the router had a stream running on youtube, a file that is downloading, a game running online or voicechat with ventrillo, nothing happens to those processes. I just can't start a new download, or open a new tab, or start anything that requires internet connection.I've tried using different browsers, I've tried updating my computer, using different ports both on my computer and the router, shutting off all my firewalls, factory resetting my router and nothing works.I've narrowed the problem down to an issue with my computer as this would never happen to any other or device. This problem ONLY happens when I surf the web or view/open websites.The only way I can fix the problem is by walking up to my router and restarting the router (the router only) and waiting a minute for my computer to reconnect.I've noticed that the router stops working when I go to sites or links that have on screen popups of flash or java. When I check my network connection after the internet stops working, the rate of packets received becomes dramatically reduced.
I'm running a Windows Server 2008 Enterprise Edition server that is currently the domain controller, and a Windows 7 Ultimate client. I have a 'Test' user for messing around with group policy - anyway, on the client Start Menu it has 'Test User' which leads to some form of libraries folder. Is it possible to restrict the link without removing their name?
I have problems with my D-Link DIR 635 router. It shows up fine in list of networks on my girlfriends Mac and on my new laptop, but on my older laptop it doesnt show up at all (whereas a lot of other networks do). Seeing as my current laptop is being repaired at the moment, I need to be able to connect to the net with my old laptop too.
I run Windows XP Professional on my laptop, which is a Compaq Presario f700. why the network doesnt show up?
It's kinda hard to keep "peckin" at the small numbers to go to the next page.Put this post where ever it needs to go but since I am in DIR-655, I put it here, because it's TOO AGGRAVATING to find the NEXT page.
Where the list of changes for the latest firmware version can be found? My new DIR-655 has firmware from May 2010, and I see the latest and greatest on the DLINK website is from September. But it doesn't state what the changes are, so I'm not sure if I should upgrade or not.
I have a DIR-615 router running FW version 3.01 with Hardware Version: C1 , my xbox is wired to my router. When I port forwarded, i had an strict nat, but had the best connection, but not by very much. When i put DMZ on, i had a strict nat, and the connection to other people was a bit better then UPnP.When i had UPnP on i had a open nat, i could barely be able to connect to anyone.what is a DHCP Reservations List?
Ever since I updated my firmware to 1.01 my web interface for the network settings screen has been random. Somtimes it shows a DHCP reservation list, sometimes it doesn't. Sometimes there are reservations, sometimes there are selectable radio buttons. I guess I'm just trying to figure out if this is a firmware issue or not. Ever since I updated the firmware it has been flakey.... But I was having issues with other stuff before that. When there are no reservations, sometimes i can't even select any computers because there aren't any in the drop down, when all of my hardware is online?
I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.
I have a setup using LogMeIn Hamachi and the network type creates a Windows Bridge. I also use the DHCP Reservations List to assign the same IP to specific devices. Well I have the MAC Address for my NIC in the list which works when I am not using the bridge. When using the bridge, of course the MAC address changes and when I try to add it to the list I get the following message in a popup window. The MAC Address is 02:e0:61:05:45:3e I have tried manually entering it, letting the router enter it from the list of computers and just to rule out something stupid, I have tried changing the letters to upper case and removing the colons.
Another issue I can see when this issue is resolved is that I do not believe it will let me add this reservation since I will be using the same IP used by another reservation. My DGL-4500 allowed this if I had the other reservations using the same IP disabled.Below these comments/rants are some feature requests. I have put them last as some of the requests are explained in the comment/rant section.I have read through this list and I have to say that after I purchased the router, which I ordered on-line, I was dreading it, but I have not had issues. It is possible that I am not using features that cause this issue. I believe the issues occur when using certain configurations with the "Enable Advanced DNS Service" enabled. I am not using this service. Since I knew people were having issue s with it, I wanted to see my results leaving that out. I have had this router running since a week before Christmas and I have many Virtual Server entires, QoS and port forwarding entries, https based remote administration, both 5GHz and 2.4GHz networks enabled supporting a/b/g/n(on both networks) and a guest network enabled on both bands all supporting WPA (TKIP and AES). I have 2 Giga wired connections that are always active, a 100Mb connection that is on an off but used almost daily, 2 Laptops that use the 2.4GHz network daily and one is 802.11g 54Mb and the other is 802.11n 150Mb and they are on at the same time almost daily, a printer that is on and used multiple times a week that uses 802.11g and a game system that uses 802.11a this device is used daily. Most devices are on and used at the same time daily and we have a good deal of regular Internet traffic and moderate other network traffic during these times. At night all computers are backed up over the network and most of the other network devices are off or not during this time. Other than having to reboot my Internet hardware provided by my ISP, I have not had issues. The router has been rebooted for config changes and I usually cycle it when I cycle the Internet hardware. Point is, so far no issues, good performance and it works and I have of course had other devices connected using the guest network and I have been testing features, performance, etc.
What's up with having so much variation in how features work across routers?e.g. My DHCP Reservation issue above. This router does not work with a setup like my DGL-4500.This router allows a preset amount of services like QoS and Virtual Server entries while the DGL-4500 just lets you add entries. Now maybe there is a limit and it just looks like there is no limit. Of course, there is at least a limit that is reached when you have used a certain amount of memory with the configuration.so many routers while leaving gaps and the lack of feature explanation and comparison?I switched to this router because I wanted a dual band setup which my DGL-4500 does not provide. That leads to the issue of the new way D-Link deals with dual-band. When I purchased the router it did not list that you had to choose 2.4GHz or 5GHz or it is not simultaneous dual-band. I was duped because I used to install DWL-7100AP for people that needed better wireless options for home businesses and small businesses and that provides simultaneous dual-band and back then if it was dual-band it was simultaneous. But I am disappointed in some of the features lost like WISH support and a few options here and there which do not seem like they are specific to gaming routers and this router is more on the mid range and low high range end of consumer, prosumer, home business and lower traffic small business routers, so why is it missing these features and why does it have the limitations I listed in the "variation in how features work" section above?
Other examples of lack of feature clarity are with Game Fuel, HD FUEL and Intelligent QoS. Isn't Game Fuel Intelligent QoS of some sort. Now from the example provided in the overview for the DGL-4500, Game Fuel optimizes game performance, but it does not say this is automatic or if it works along with the rules you set in the Game Fuel section which is the same as the QoS Engine section in the DIR-825. The difference is that the DIR-825 has a "Enable QoS Engine" option while the DGL-4500 has an "Enable Game Fuel" option. It seems that Intelligent QoS does what Game Fuel does, but expands that to VOIP, Media Streaming, etc. and it may be more automatic. HD Fuel in the only place I have seen it mentioned seems to refer to the combination of Intelligent QoS and the inclusion of 5GHz wireless support. Of course there is no version and feature documentation and in fact while the overview of the DIR-825 talks about gaming with Intelligent QoS, but if you bring up a comparison of routers, the chart has no in the gaming section for the DIR-825. I can't say I have noticed better or worse gaming performance with the DIR-825 compared with the DGL-4500, but given the shear lack of documentation on how to use Game Fuel and Intelligent QoS properly, who knows if I have this setup correctly. I will say the QoS Engine section in the DIR-825 is easier to use than the Game Fuel section in the DGL-4500.
1) The ability to reduce the brightness of the status lights, set them to solid if enabled with brightness options and to set them to off with an option to have some very faint light to show that the router is on. Of course I should be able to set different options to be applied at specific times.
2) Add the applicable features missing from the DIR-825 that are found in the DGL-4500 and applicable features from other routers. Also, get them all so they work the same on each router and let get the best from them all and make that the standard. e.g. In my DHCP reservation example above don't set the standard to the limitations of the DIR-825, but make the DGL-4500 function set or better function set of all routers combined for each feature the standard with-in router categories. e.g. the DIR-825, DGL-4500 and DIR-855 would be in the high end router category for consumer, prosumer, home business and lower traffic small business routers.
3) For DHCP reservations, you should not be limited to the DHCP IP Address Range.
4) On the log-in screen, get a better captcha and fix the tab order.
5) Add a log-out option in the web interface.
6) Allow for a next hop option in the DCHP server section. It would be cool, if there could be a list of IPs allows one to be enabled at a time.
7) Allow different DHCP server settings for each network. There are 5 on the DIR-825. Wired, 2.4GHz regular, 2.4GHz Guest, 5GHz regular and 5GHz Guest. Would be nice if you could set a couple of VLANs on the Ethernet ports and then have different DHCP setings for each VLAN.
For guest wireless networks, allow rules to be set to allow access to certain services on the network. E.g. I may want to allow printing. So allow a single port or multiple ports with easy settings for consecutive port ranges to be opened to an IP, IP range or all IPs and allow all ports for an IP or range of IPs. Of course, leave the allow full access option.
8a) Allow users to set rule sets that can be enabled/disabled like the full access option.
8b) Allow a control that can be set in the rule sets that controls if the wireless devices can talk to each other and another that controls if they can access devices on the wired network and another that controls if the wireless devices can access the Internet.
8c) Allow rules above to be limited to be applied to specific MAC Addresses.
8d) These options would be good to have for the non-guest wireless networks and wired network as well.
Region : Hongkong Model : TL-WR702N Hardware Version : V1 Firmware Version : ISP :
Before my TL-WR702N was working fine as a reperter. After sometime it doesn't work any more, so I try to reset it again but now I couldn't see my SSID after I press the survey buttom in the quick setup - wireless repater page.