D-Link DIR-655 :: Not Logged In As An Admin

Jan 28, 2012

I just bought the Dir-655 with 2.00 firmware. I am having trouble with my NAT on my game system and I have tried everything but I have everything setup on my router where it needs to be. I read somewhere, where a guy was having my same trouble and he upgraded his firmware to 2.03na. I have tried with no success whatsoever.

Downloading the file from the d-link website with no problems. But i keep getting the same message when i try to upgrade the router saying the file may be corrupt, the router is to busy, or I am not logged in as an Admin. I am the only one using the internet and I am logged into my router as the admin. it wont even start uploading the firmware to my router..

View 9 Replies


ADVERTISEMENT

Cisco AAA/Identity/Nac :: ACS 5.2 Logged User Cannot Access To Admin Parameters

Sep 9, 2012

After upgrade  to ACS 5.2 appliance ,  we are trying to configure AAA between Ciscoworks  and ACS. Authentication is working but authorization fails , logged user cannot access to admin parameters. I've configured attributes manually but it doesn't work.Does ACS 5.2 support integration with CiscoWorks?

View 1 Replies View Related

D-Link DIR-655 :: It Won't Stay Logged In To Setup

Aug 7, 2011

I have a DIR-655.  Whenever I log into the router to review settings, I get kicked back to the login screen.  I can't get to any of the menus.  I'm running the A3 hardware version and 1.35 firmware on the router.  I recently upgraded my computer from Vista 64-bit to Windows 7 64-bit.  The problem occurs with Microsoft and Firefox browsers.  I was able to access the router using another machine on my home network running Vista 32-bit

View 16 Replies View Related

D-Link DAP-1522 :: Cannot Stay Logged After Firmware Upgrade

Sep 30, 2012

I up graded to latest f/w. Now I can only log into the unit for about 1 minute before a get a limited connectivity warning, then it boots me out.

View 7 Replies View Related

D-Link DIR-655 :: Won't Stay Logged In While Switching Menus On Browser Screen

Feb 19, 2012

I have a D-Link 655 router.  When I access it through my browser, and say I go to the advanced tab, most of the time when I click on any link in any settings it automatically brings me back to the 'login' screen.  Once I log in again, then it takes me back to the status screen.  For instance, I just logged on.  Then I went to click on the 'tools' tab.  I do, and it takes me back to 'login'  I do, and then back to status. 

Also, I have hardware version B1 and Firmware version 2.00NA  I see downloads for firmware 2.01NA and 2.03NA under support resources.  But my router says my firmware is up to date at 2.00NA.  Should I be updating the firmware as it shows on the website?

View 34 Replies View Related

D-Link DIR-655 :: Can't Get To Web GUI Admin Page

Oct 30, 2011

I followed this simple procedure to turn my DIR-655 into an access point: url...and it all worked except when I go to url... (which is where I left the router's IP address set) I don't get the DIR-655's admin login GUI, just a timeout.  Since my main Linksys router is on 192.168.1.1, and my cable modem is at 192.168.100.1, and the DHCP addresses handed out by the Linksys router is from 192.168.1.100 to 192.168.1.149, getting to 192.168.0.1 should not be a problem.  Functionally, the DIR-655 makes a great access point, wired and wireless are working very well, and I don't see any reason why I can't get to the web GUI admin page.I should be able to get to the DIR-655 router via the WAN port, as suggested in the procedure above, but I'd really really like to be able to get to it without having to connect a cable to the DIR-655 WAN port.

View 5 Replies View Related

D-Link DIR-615 :: Can't Log Into Admin To Make Changes

Dec 12, 2012

I have a DLink N300 (DIR 615), firmware 9.02NA.I've been trying to log into the "admin" but was only able to once. When I did get it everything was greyed out so I couldn't make any changes.

View 1 Replies View Related

D-Link DIR-601 :: Can't Login As Admin

Jan 6, 2013

i'm having some trouble logging in as admin. I leave the password section blank as directed but it comes up as "incorrect password".  I then tried the same using the "User" and it worked just fine but i cant change any of my settings. 

View 6 Replies View Related

D-Link DIR-655 :: Can't Connect To Admin Page

Feb 19, 2013

I'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to 192.168.0.1 ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to 192.168.0.1 ...

View 1 Replies View Related

D-Link DIR-601 :: Unable To Get WAN Admin Access?

Apr 13, 2012

Router is a DIR-601 hardware B with firmware 2.00NA Using the router connected to a cable modem, I was unable to gain admin access via WAN.To troubleshoot the problem, I connected the router to the LAN side of my main router (DHCP server, DNS, etc.) The primary router correctly assigns a WAN IP to the 601. The 601 operates normally to access the Internet either via its WiFi or via Ethernet. The 601 is configured for a different IP address range on its LAN side so there is no IP address conflict possible with my main router.On Tools->Administration, Enable Remote Management is checked, Remote Admin port is 1080 (I've tried others), and Remote Admin Inbound Filter is set to Allow.In this case the WAN IP address of the router is 192.168.0.98. When I go to http://192.168.0.98:1080/ with a web browser from the WAN side, I get no response. From the same computer I can ping the router with "ping 192.168.0.98".I figure I have to be missing something here. It appears that this feature just is not there, but others must have this working. It seems like I've tried every possible combination of filters, port numbers, etc., but it just doesn't respond from the WAN side. (192.168.1.1 on port 80 works just fine from the LAN side.)

View 3 Replies View Related

D-Link DIR-825 :: Can't Seem To Login Into The Admin Console

Mar 12, 2013

I wanted to update the F/w on my rev b dir 825, but unable to load the login console for admin, I haven't changed anything and the router was still on 2.07NA f/w

View 1 Replies View Related

D-Link DIR 655 :: Blocking Website Of Admin

Apr 5, 2011

I have a dir-655 a3 router that is blocking my website ip address.I could previously access this site until one day, without changing any router settings, it started blocking communication to my website. pings, tracerts, web browsers, everything simply times out. It resolves the IP address ok but doesn't go any further than that. I was on firmware 1.31 and have now upgraded to 1.35NA, but no luck. I have also tried resetting factory defaults to no avail. If i bypass the router and plug my computer straight into the modem, the site loads fine. so its definitely the router. I have tried this on a number of devices to make sure. It appears that for some reason the router is blocking that specific IP address as it is on a shared hosting and I can't access any other sites on the same IP address. Does the router check the IP address with any web service before returning the request?

View 4 Replies View Related

D-Link DIR-655 :: Admin Interface Has Failed In Some Way

Jun 20, 2011

Bought a new DIR-655 Rev B a few weeks ago.It's web admin interface has failed in some way.  The device is still passing all user traffic in both directions, but attempts to connect to the admin interface with my web browser, from both the wired inside and the WAN outside fail.  I can telnet to the actual tcp port number that it's configured for and establish a connection, but I can't get any response from it.  At this point I'm expecting the only way I'm going to clear the condition is to power cycle the device when I get home from work.  It is to note I have the device configured for https for the admin interface.  Perhaps that's the more 'advanced' feature that's newer and is exhibiting some kind of bug, I wonder.  I'm running the latest firmware available from D-Link. 

View 5 Replies View Related

D-Link DIR-601 :: So Slow In Router Admin Pages

Jun 26, 2011

I needed to immediately set a schedule and block IPs, these pages are built into the router.It took forever for the pages to load it took 30 minutes to navigae 5 pages. Every time I try it.Router is good and signal is excellent but the admin router pages to configure are frustratingly slow.As a techie it is anoying, as a customer getting support by the hour spend more on a faster better quillity router were the work can be done in 1/20th of the time it takes on this router.I'd say I have a dud but once setup the router is a great performer if you do not need to admin the router further?

View 3 Replies View Related

D-Link DIR-825 :: Admin Pages Slow And Locking Up?

Dec 7, 2009

I am having issues with my freinds new DIR-825 Rev:B1 Firmware:2.02NA, The admin pages are intermittently slow to load and sometimes wont load until I power cycle the device.  I am using IE8 on vista x64, and have the issue on all pc's on the network.  Is there a work around for this?

View 7 Replies View Related

D-Link DIR-601 - Access Modem Router As Admin?

Feb 26, 2013

I was trying to access the modem router as the admin but AT&T seems to have a pain in the butt security system from me making any changes. I wanted to forward some ports to setup my Synology DS212j Network Attached Storage (NAS). I connected my d-link router to the already setup modem router which I am now connected to. I have to run off to school but I was wondering, would I be able to forward the port off my d-link DIR-601 and be able to host my NAS server off that?

I don't have too much in-depth networking experience besides setting forwarding ports, setting static IPs, but I can't do that since I am not the admin for the AT&T router. I figure the password for the AT&T router is just defaulted to admin or blank but I haven't had time to fully test everything out.

View 4 Replies View Related

D-link Dir-615 :: No Wifi And Cannot Access Admin Homepage Via Ethernet

Mar 19, 2011

I can however connect to internet ?

Tried Explorer & Firefox

View 1 Replies View Related

D-Link DAP-1522 :: Can't Access Admin Screen After Connected

Nov 30, 2011

I have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.

On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow:
- IP address: STATIC
- Wireless config: using Wizard
- Wireless security: WPA2 / AES
- Mac Cloning: disabled

I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:

a). Reset DAP-1522

b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522

View 3 Replies View Related

D-Link DCS Network Camera :: 920 - Changing Admin Password?

May 16, 2010

Im having some problems changing my admin password on my DCS920

I know the default login is Login: admin / Password: "blank"

So I go into maintence, and there's an option to change the password.

it lists:

old password
newpassword
confirm

So I leave the old password blank and type in my new password in the following 2 spaces. I click apply and a window pops up asking me to enter username and password. I just enter admin and leave the password blank. I hit ok, and everything seems to update ok. So i log out, and try to log back in.

A window pops up asking me for my password. I type in admin for my username, and my new password, and it wont work

I type leaving the username blank, and type in new password... WONT WORK

I type admin, and new password again.. WONT WORK

I try password with first letter capital.. WONT WORK

I try password with ALL CAPS... WONT WORK..

Basically it wont let me log in as admin anymore. I figure I may have typed the password wrong the first time so I reset the camera and try the process again.. SAME PROBLEM.

Am I doing something wrong in changing my password ?

I dont wanna leave my default admin login as admin/"blank" , but when I try and change the password, it wont let me log in again as admin.

View 4 Replies View Related

Home Network :: D-link Dsl2500u - Cannot Connect To Admin Interface?

Dec 4, 2012

I finally managed to set up this DSL modem / router on Sunday to replace my old Billion router. I set it up with DHCP and running on IP 192.168.1.254.Last night, the power tripped, and when everything came up again the entire network was dead - PC's were not getting IP's from DHCP.I connected a known working cable directly from laptop to router and attempted to access 192.168.1.254, nothing.So I reset the router and try again to the default IP 192.168.1.1. Nothing. Tried another PC, nothing.Restart router, try again, nothing. Plugged into my other router and try again, nothing. When I initially got the router I had the same problem until one day it just worked, still no idea why

View 2 Replies View Related

D-Link DSL-2680 - Can't Connect To Router's Admin Page (timeout)

Feb 28, 2011

For about a month or two now, I've not been able to connect to my router's admin page @ 192.168.1.1 I am using a D-Link DSL-2680 router.

Whenever I go to connect to 192.168.1.1 in my Web Browser, it just sits there trying to connect and does nothing. But eventually after some minutes I get the error: 'This web page is not available The web page at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 101 (net::ERR_CONNECTION_RESET): Unknown error.' Here is a screenshot:

I tried pressing the reset button on the back of my router, but it would just sit there with the green power LED and another green LED just flashing constantly (I assume this is the ethernet 1 cable LED) and this happens for more than 10 minutes.

All I want to do is just port forward my game servers again without the use of Hamachi or other programs

View 2 Replies View Related

Tp-link Adsl2+ Wireless :: Td-w8960n - Disable Admin Access Over Wifi?

Nov 21, 2012

Region : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n
ISP :

Just installed my new 8960 and it's working fine. However, I'd like to disable admin access from wireless, and only have that available via the LAN. I can't find anything that looks like it'll do that in any of the setup pages, is it possible? All previous wireless routers I've had have been able to do this.

View 4 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Admin Page Ssl Option?

Apr 6, 2013

Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I have a question regarding the admin page on the router. Default it seems to accept only http access and I cannot find the option to switch this to ssl over https. Now the admin password goes across the WLAN in clear text which is not secure and not what I want. Is there any way to change the setting so the page is only accessible through https?

View 1 Replies View Related

D-Link DIR-655 :: SBS2008 - Network Filter Blocks LAN Port Access To Admin Page

Oct 16, 2011

I'm using my 655 as a WAP, so nothing is connected to the WAN port.  Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page.  Even if I put the connecting PC's LAN MAC in the tablet.

View 9 Replies View Related

Check The Users That Logged Into PC?

Mar 27, 2011

Some1 browse my PC via LogMeIn Hamachi, so i need 2 know who did that , how 2 see the log list?

View 1 Replies View Related

Find Out Who Logged In And Out Of Laptop?

Aug 30, 2012

how can i find out who logged in and out of my laptop

View 1 Replies View Related

Cisco :: High CPU In 2960 When Not Logged

Aug 28, 2012

I've noticed a strange behaviour in my 2960s regarded to CPU.
 
CPU level is very high, 70-75% when nobody is logged by vty or console, but it drops drastically to 40% when sombebody logs in. I've been able to discover that this is due to CPU interrupt level, as it shows the output of sh process cpu sort 5sec, just logged in.
 
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 68%/37%; one minute: 67%; five minutes: 50%
 
...Some seconds after logged in...
 
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 35%/11%; one minute: 52%; five minutes: 48%

View 3 Replies View Related

See Who Logged On Network At Any Time During The Day / Week / Month?

Sep 13, 2011

is there a way to see who logged on my network at any time during the day/week/month?

View 1 Replies View Related

Cisco :: Log Buffer Has Logged All The Commands Executed

Jan 3, 2012

In case I view the crashinfo file with more crashinfo:data, there is a "Log buffer:" section, which has logged all the commands executed by users.

View 4 Replies View Related

Cisco AAA/Identity/Nac :: How To Show Logged In Users In ACS 5.1

Sep 5, 2011

After some time no using Cisco ACS5.1, I still don't know how I can see all logged in users. I can see logging and check why an log in goes wrong, but in ACS 3.2 I just clicked on Reports and Activity and I could choose to see logged in users, or failed attempts, etc.

View 2 Replies View Related

Cisco :: WLC 5508 Cannot Have Similar User Logged Twice

Aug 26, 2012

I was having users on a Cisco WLC 440x controllers. Some service accounts were logged several time with the same AD-Account.Since I migrated them on the new controller (5508), it seems that we cannot have the same AD user logged several time.
 
I changed the Radius server with the one we were using on the old 440x but situation seems to be same,I checked the error message when trying to start a second similar connection they looks like :
 
*Dot1x_NW_MsgTask_4: Aug 24 14:04:51.558: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client xxxxxxxxxxx
*Dot1x_NW_MsgTask_4: Aug 24 14:04:51.558: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447
Authentication aborted for client xxxxxxxxxxx
 
If I move back to the other 440x similar logins are allowed without any problems.

View 3 Replies View Related

How To Find Current Logged On User In Domain Network

Aug 22, 2011

how to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.

View 1 Replies View Related

Cisco Wireless :: AP541N - See Logged In Device Info

May 7, 2013

Is it possible to see device information for equipmnet that is logged into the AP541N access point?  I was able to determine a specific IP address was eating a significant amount of bandwidth and was hoping to get the device information (name, type, etc) in the hopes of tracking down who it was. 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved