D-Link DIR-655 :: Can No Longer Access Internet
Jan 28, 2011
My DIR-655 has been working flawlessly for several months since I bought it. It is connected to Road Runner High Speed Internet from Time Warner. This morning it will not access the Internet. It shows a wireless connection, and I can connect to it via direct wired connection, but no Internet. A direct connection to the Time Warner Cable Modem connects to the Internet just fine. Cycled power on all units, & Time Warner reset the modem. Nothing has fixed the Router.
View 14 Replies
ADVERTISEMENT
Dec 21, 2011
Background: This weekend, I lost my internet connection at home. I called my ISP and they sent someone over. The guy rewired the entire house (our ISP is also our tv cable provider), because he felt that our signal was probably weak due to the wiring. Long story short, after two hours of rewiring and fixing the cable outside out house (chewed through by a squirrel), he said the modem's signal was back to normal and left.
When I plugged the router; however, it refused to hold the internet connection for more than a few seconds. On the front panel, the planet-shaped light turned orange, then blue (for a few seconds) and then turned off entirely. I tried another few times and got the same result. At best, it stayed connected for a minute, until I rebooted my computer. The laptops in our house do read the presence of the router, so it's safe to assume that the problem lies with the router's capacity to receive the signal.
View 5 Replies
View Related
Oct 10, 2012
Since sometime on 10/7/12, I can no longer access the internet from my desktop.I'm connected via wired Ethernet but have also tried connecting via a USB WiFi Modem.Network and Sharing Center shows "Unidentified Network No network Access".All other machines on my home network have internet access (one other desktop as well as multiple WiFi clients).I've tried pinging the router (192.168.1.1) .. request times out.I've tried reset TCPIP and Winsock Stacks, Disabling / Reenabling the NIC with no effect.In troubleshooting, I've found a registry entry which seems to be different from that in my working desktop and which I cannot change.It's HKLMSYSTEMCurrentControlSetservicesTcpipParameters. [code]
View 11 Replies
View Related
Oct 17, 2011
I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a 24 port switch. We are currently using a D-Link router and are upgrading to the Cisco router. The problem I am having is as soon as I connect one of our servers or the 24 port switch to the Cisco router I can no longer access the internet or login on the network, I also cannot access the routers setup from either server. If I connect the router to just a stand alone computer I can access the setup and change things but as soon as I connect the server or 24 port switch everything dies (all lights are still green on the router though so everything is connected).
View 1 Replies
View Related
Dec 18, 2011
I have an Inspiron 1721 laptop and can no longer acces the internet unless I attach the ethernet cable from my wireless modem. In other words, I can no longer access the wireless internet from my laptop. I have talked with my internet service provider and the say the problem is the settings with the laptop itself because I can access the internet from my tablet computer.
View 2 Replies
View Related
Dec 8, 2012
Had my DIR 615 rev A just fail one day spontaneously; managed to bring it back by reflashing from the emergency room, but now it will not hold setting through a power cycle, other than this it seems to be working well.
View 9 Replies
View Related
Jun 16, 2012
The other day while I was browsing the internet all of a sudden my internet stopped working. I look down below and try to connect to the network again but it no longer shows my network anymore. I went into the room of my router and it looked fine. All lights were lit up like they should be. I turned on my Laptop to see if it was just a problem with my desktop but it's still not showing my network either.
I have restarted my router and reset it numerous times and it has still yet to show my network. It only seems to work if I connect it to my Laptop with an Ethernet cord. I have two different routers (Both Linksys) and they both do not work.I also have two different wireless adapters (D-Link & Netgear) and they both do not work
View 14 Replies
View Related
Feb 23, 2011
Can I just plug the router into a 110 socket and then press the reset button to clear all stored information?
View 3 Replies
View Related
Jan 5, 2012
Well I was trying to get my D-Link DIR-615 router too run DDWRT so I could use it as a wireless reciever.But things have gone wrong, the wireless controller no longer works. and I'm trying to restore the original factory firmware.(this is a spare router we had sitting around it's not an important asset) it boots up fine with DDWRT firmware the wire functions still work, but I needed the wireless functions.I just can't get the original firmware back.
View 1 Replies
View Related
May 1, 2012
My internet has been very sluggish so after reading the thread about Router security and neighbors who might be stealing my internet connection via WIFI, I decided to check what kind of security I had. Turns out I have WPA and no unknown devices were connected at that time. Would like to get an email whenever a NEW device logs in...if that is possible. But while I was in there "futzing around" I did something terribly wrong. I followed all of these steps. Then I noticed that the router speed section had me listed at 145mbps. I had recently changed cable companies to one that provided faster interenet. So I figured I would bump that up to 300 mbps. I can no longer access any of my router settings. What did I do, and how can I undo it?
View 4 Replies
View Related
Apr 11, 2011
I have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router okay, that worked. But I move 2 rooms over and I no longer connect.
Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.
At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.
View 3 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Mar 17, 2013
Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
View 9 Replies
View Related
Feb 20, 2013
Region : Malaysia
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : V5
ISP : Streamyx
TD-W8951ND V5 No longer have Mac Spoofing support.i just bought this modem since my old one is faulty. and i realize that my modem is V5 my previous modem is V4 and there is Mac Spoofing support there.
View 1 Replies
View Related
Dec 24, 2009
I originally began using my D-Link cameras, two DCS-5300s and a single DCS-6620, with the IP Surveillance software. I see that the software is no longer recommended and may no longer be available. Any explanation for the move to the DView Cam software ? If I were to convert over to DView Cam from IP Surveillance will I lose any functionality or features. Will there be any functionality or features gained ?
View 6 Replies
View Related
Feb 19, 2012
my Vizio TV (VF552XVT) can no longer find any wireless access points even after inputting SSID or IP information. Other wireless devices (my phone) are able to connect wirelessly. Everything was working fine until a power outage about 3 days ago.
View 2 Replies
View Related
Apr 22, 2013
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies
View Related
Jan 26, 2012
Had the following network (fully functional) for last 3 years: Modem (netopia dsl 192.168.1.254) router (linksys wrt54gs 192.168.1.1) WAP1 (linksys wrt54g2 192.168.1.250) and WAP2 (Linksys wrt54g2).I was always able to click on Devices and Printers in Win 7 and would see the equipment displayed.I could also access the router and wireless access points by typing their address in my browser. The modem failed after 5 years.I purchase a new Netgear N300 ADSL2+Modem Router (DGN2200)and replaced the failed modem and attached router.I made no changes to either WAP's.Everything works just fine (after about 30 minutes on phone with Netgear Tech to configure), but now none of the equipment displays in Devices and Printers. Also, I cannot connect to either WAP by typing their address in browser.I can see the Netgear device when I click on "network" in file manager.It displays a model number and is labeled a "gateway".
I'm just curious as to why I am no longer able to "see" or access the devices. Looks like I would have to actually pull the WAP's and connect to them directly if I needed to change their configurations.
View 1 Replies
View Related
Aug 10, 2011
There is one guest interface, one guest WLAN. The WLAN is set with a DHCP override address of the guest interface. But it no longer allows this as I found out. Anyway, I can get the client to now receive an address from the internal pool on the WLC, but it will not route to the authentication page. I noticed that the WLC excludes the clients attempting to connect on the guest WLAN due to failed 802.1x authentication! the WLC never even gave me the chance to authenticate using an account created either through the lobby ambassador or creating one directly on the controller.
View 3 Replies
View Related
Jul 3, 2012
When I am viewing live recorded video through d-viewcam I can hear the audio. I currently have 2 camera recording 24/7. When I go to playback to play a certain clip, there is no sound at all. When I save a clip and click export audio, still no sound.
View 4 Replies
View Related
Apr 9, 2013
Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
We are trying to use a TL-WR941ND purchased about a month ago, but it keeps hanging, usually within a day or so of operation.To be clear: by "hanging" I mean the device stops providing wireless services (its SSID is no longer visible in WiFi clients) and becomes nonresponsive to pings or control access attempts (via settings web page) from the internal network connections.The device is used in a very simple scenario, where it's being employed as a simple access point, not as a router. As such, the device's configuration is as follows:
* WAN interface is configured with a dummy static IP (10.10.10.10/24) with gateway and DNS set to the internal IP address of the actual routing device connected to the external world.
* LAN interface is configured with an IP address inside the actual internal IP subnet (192.168.1.0/24).
* DHCP is also disabled as this service is already provided.
* Wireless settings: radio enabled, SSID broadcast enabled, WDS disabled, 11bgn mixed mode, auto channel width, max TX rate, channel 7 (manually set). Using WPA-PSK security.
Rest of the settings are unchanged from their default values, as the device isn't being used as an IP router by any client - just as a WiFi/Ethernet layer 2 bridge. We're using what appears to be TP-Link's latest stock firmware for the device.The settings described above appear to provide the connectivity required by the WiFi clients. However, the device continuously hangs within a day or so of operation, requiring someone to physically attend to the device and cold-restarting it (disconnecting it from power and reconnecting it) to regain an operational state.
After performing a cold restart, the system log shows nothing beyond the startup entries: "System started" entry followed by security info entries regarding enabled protocols. Then the device appears to work well for a while, until it hangs again, forcing again someone to attend to the device, etc.
View 6 Replies
View Related
Jul 29, 2011
The other day, I shut down my laptop and when I turned it back on, it would not connect to the internet. It continuously says limited connectivity and unidentified network. my info is listed below
Location: Birmingham, Alabama, United States
ISP: AT&T they also provided the router/modem which is all connected in one.
Router Model: 2wire Gateway 3800 HGV-B
Connection Type: Wired and Wireless
Wireless Encryption: TKIP
Network Card: Dell Wireless 1510 Wireless-N WLAN Mini-Card
Computer Model: Dell Studio 1535
OS: Windows Vista Home Premium SP2
IP configuration brought up this info. Also tried pinging Google.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Stephanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No[code]......
View 14 Replies
View Related
Jun 2, 2011
Last night on the xbox 360 i was suddenly experiencing alot of lag on other peoples voices. i took no notice of it and the next day i went on my laptop and alot of websites wouldn't load properly.i can go on google,obviously this and my hotmail(after having to wait a long time for the hotmail to load), but others such as ebay will not load. I cannot even access my router settings by typing in my ip address, instead i get a message saying the page cannot be found. also i was disconnected from xbox live with the internet to xbox live part not working. Obviously the first thing i done was turn the router off and back on but it hasn't made any difference.
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4055 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1804 Mb
Hard Drives: C: Total - 290204 MB, Free - 141170 MB; E: Total - 14999 MB, Free - 5644 MB;
Motherboard: Dell Inc., 0G848F, , .5MDJWJ1.CN7016697U05OT.
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
View 3 Replies
View Related
Dec 15, 2012
After updating the firmware of th EA6500 to Ver.1.1.28.146072 I have no longer access to the GUI options of Speed Test, Guest Access, Parental Controls, Media Prioritization and USB Storage. I have reset the router to factory default settings and still none of the items are showing on the web page the only options available are:Connectivity,Troubleshooting.Wireless.
View 5 Replies
View Related
Feb 15, 2012
i can no longer connect to the internet and i have tried everything i could think of. my "wireless network connection status says 0 packets sent and 0 recieved,but im connected to my router with excellent signal. when i got this laptop it had alot of malware, i removed 283entries with malwarebytes in safemode. after i did that i couldnt connect to the internet.
View 1 Replies
View Related
Apr 15, 2011
I installed virtual pc 2007 that has winXP and my host is Windows vista. I was able to make my virtual pc to connect to host internet using NAT for adapter 1 long time ago without any problems but it is not working anymore since last month! Although it works when I try it on another host. I believe the problem is in my host so what to check excatly in my host.
View 1 Replies
View Related
May 25, 2012
I have been using the same Toshiba A105 for the past three years at work. Recently I had to reinstall XP and since then have not been able to connect to my works wireless/wired internet most of the time. I have no trouble connecting to my wireless at home or basically anywhere else except work. Once in a rare while it will connect to work but if it's wireless it's low connectivity and if it's wired it's prone to just drop out again randomly. Everyone else at work is able to connect wirelessly/wired without issue. I've tried static IP and changing my MAC addressThere are some unsecured wireless networks in range that I can connect to but don't want to for work transactions.
View 3 Replies
View Related
May 16, 2012
I woke up and my computer just refused to connect to internet. My roomates computer connects fine to the same modem (we use adsl). I tried switching cables and ports. The night before, my computer had an unexpected shutdown...
View 1 Replies
View Related
Jul 31, 2012
I accidentally un-installed mine so I can no longer get wireless internet. How can I get it back on my computer? It's a Dell Inspiron N4010 with windows 7 64-bit
View 9 Replies
View Related
Dec 14, 2011
I have a file server running windows 2003 and five computers (1 windows 7, 4 windows xp-sp3).There are two shares on the server.When the router is setup with wpa2, three of the windows xp machines will have problems with mapped drives. Directly after the drives are mapped, everything works, but 10 or so hours later, users can no longer access these mapped drives and there is no way to reconnect them it seems.The other two machines (windows 7 and one windows xp machine) have no problems whatsoever.
The only thing that the three computers have in common is that they are also sharing a printer (an hp j4680) attached to one windows xp machine (not the server).If I set everything to wpa, everything works fine, but of course my wireless network speeds drop to 56mbps.
View 4 Replies
View Related
Mar 6, 2012
My compaq presario F750us stopped connecting to the internet both wired and wireless. It no longer recognizes its Artheros Ar 5700 wireless adapter. The ethernet connection is restricted to local access only. The notebook runs Windows Vista Home Premium. I have followed all diagnostic and repair steps as per Vista's instructions. Two other computers remain connected. The router is Linksys Wrt 54 G2 V1.
View 2 Replies
View Related
Aug 25, 2011
My E2500 was working great for the past 3 months, and now it seems to be broken since I cannot access the internet anymore. I can connect to the router via wireless or wired at 192.168.1.1 and play with all the settings. On the status page, I have entries for Internet IP Address, Default Gateway, DNS1, and DNS2 as though I was connected fine to my DSL modem.If I connect my computer to my DSL modem then I can access the internet perfectly fine, so I know the modem is working. However, if I connect the E2500 to the modem, and then my macbook to the E2500 then I cannot access anything other than the router config pages. I have also tried, from the router admin page, to ping "www.yahoo.com" and "8.8.8.8" to no avail.
I have tried without success:
1. Renewing IP address from the router status page.
2. Cycling the power on the modem.
3. Rebooting the router.
4. Unplugging the power from both the modem and the router for 10 minutes and reconnecting it.
5. Resetting the router by holding down the reset button for 30s.
6. Using a different computer.
7. Turning off the firewall.
8. Reinstalling the firmware (1.0.01 build 3 May 6, 2011)
View 1 Replies
View Related
Aug 25, 2012
One of my laptops (Acer Aspire 5741) won't connect to the internet, it stopped connecting last night at around 9pm UK time. It shows an ! in a triangle over my Internet Access bars. When I troubleshoot the message is 'Your broadband modem is experiencing connectivity issues'. My Compaq mini netbook is not experiencing any problems though. I have tried resetting the router, removing and readding the home network and checking the security key is correct -I do also have a VPN from my university which has been installed since April without any problems. Both the laptop and notebook use windows 7 and Firefox.
View 3 Replies
View Related
