using an Airport Express to stream itunes music wirelessly? I'm able to get the AE setup and can stream for about 30 minutes but then it can't be found. I'm assuming the 655 is kicking it off. I've tried changing settings on the 655 but nothing seems to make any difference. I'm able to use an Apple TV/iPhone/iPad with no issues.
View 14 Replies
My problem is this: Randomly, the DIR-825 will prohibit streaming to my AirPort Express via AirTunes. It'll also disappear from Bonjour Browser and AirPort Utility. I can connect directly to it, if I enter the IP into the AirPort utility directly.The only way to get it to come back is to either reboot the DIR-825, reboot the AE, or unplug the ethernet to the AE.
View 3 Replies View RelatedI cant get hp psc 2410 scanner to work on airport express.I have the printer set up wirelessly but no scanner
View 1 Replies View RelatedI am trying to connect my laptop running windows 7 to an airport express so I can stream music to my hi-fi.I've tried a number of different things, none of which have been successful.I've tried resetting the device before each attempt to connect it and I've also ensured that the driver for my computer's Wi-Fi (Intel (R) Wi-Fi link 5100 AGN) and the firmware for my router (Linksys E2000) are up to date. The apple airport utility program is also up to date. I also saw this webpage:Sharing my Win 7 PC with Apple Airport Extreme and wireless network. - Microsoft Answers And, all these settings were correct already.I also took the device back to the shop where it was tested and found to be working correctly.
Just plugging in my airport express - Opening the airport utility program, my airport express is recognized straight away. It is highlighted in the left-hand pane and I click on continue. I then get a message asking if I want to switch networks and it says that this is required in order to set it up. I click OK to continue. After a window appears saying that it is detecting apple wireless devices, I get error message number 4 saying that an error occurred while trying to access the network. It then asks me to check to make sure my network is valid.Using ‘configure other under the file tab - The airport express is still recognized in the left-hand pane but I click on configure other. A window appears asking for the I.P. address and a password. I enter the default I.P. address (10.0.1.1) and the default password (public) for the airport express. I then get error 6753 (an error occurred while trying to access the apple wireless device. Make sure your network connection is valid and try again)however, my computer still recognizes the airport express in the list of available wireless networks. I therefore click on it and connect to it. I then try to enter the details (under configure other again). I then get through to the configure apple wireless device screen in which I can input the details of my network details, etc. I enter the details and make sure that they match my routers settings (I have even tried this with no security settings on my router). I then click on update. The computer automatically reverts back to my network and it seems like everything is working. The green light even appears on my airport express. However, I then get a message stating: Airport utility was unable to find your wireless Airport device after restarting.Switching off the wireless network and connecting the Airport express to the computer with an Ethernet cable - The device is also recognized here and I can enter all the details. Before updating I turn on my wireless network so it can make a connection. The green light shows on the airport express but i again get the message that: Airport utility was unable to find your wireless Airport device after restarting.
I have a new ASUS N53S laptop and cannot get it to connect to an existing Airport Express network. It can connect to other networks.
1. Other machines can connect to the Airport Express network, including a Toshiba Satellite PC, iPhone, and MacBook.
2. The Passkey is valid and works for the devices identified in (2)
3. When entering the valid passkey, the network rejects it and says the passkey is invalid
4. I have opened the Airport Express utility and changed the passkey to a new one, and all of the devices identified in (2) were able to connect -- but the ASUS laptop still cannot connect, the system still rejects it from the ASUS laptop and says "passkey invalid"
I have only windows computers at home, although for some reason i recently bought an Apple Airport express. Probably because its a lot faster than the old router Ive got now. But I have a problem when i try to set it up. When I plug in the Express and the cable from the cable modem then start Airport utility, it cant find the Express. Ive tried using my laptop and connecting it straight into the modem, but that doesn't seem to fix anything.
View 1 Replies View RelatedI have just recently replaced my Netgear router with an EA3500 and have it bridged t an Airport Express. From there I have an ethernet cable attached to an AV receiver (Pioneer 1021k), but all to often now with this new router to use any of the features of the receiver ie Airplay, iOS app remote, I must restart the router EVERY time. This is frustrating because the these issues were never present with the netgear router.
View 9 Replies View RelatedI have an AirPort Express set up as my router, and that works fine and is the main network that I use. I also have a Linksys WRT54GL that is wired to a printer.Currently, when I want to print from my computer, I have to manually connect to the Linksys network, which is a pain. I would like to wirelessly connect the Linksys to my main network, so I can print even when connected to my Airport Express.Does that mean that I have to configure the Linksys as an access point? A bridge? Something else? How do I do that?
View 8 Replies View RelatedI added an airport express wirelessly to my E3000 network at home. Other wireless devices (laptop) sometimes have issues seeing it within the network. If these devices are wired in the network they don't have any issues seeing the airport express. Is there any special configuration I need to do to my E3000 so that wireless devices can see each other? I also had the same issue with my ps3 for streaming from wireless laptop to wireless ps3.
View 5 Replies View RelatedWhen it comes to networking and require some advice on setting up my wrt61on router with my airport express. I have managed to get it all connected up and working but am suffering frequent dropouts while streaming music. I have done a little reading and have tried changing a few settings on the router but have found no improvement. My set up is as follows.
-Modem connected to WRT610N Router
-Desktop Computer connected to network via wusb600N dongle
-Airport Express connected via wif
-Using Iphone 4 as remote
Is there a way where i can set up the airport express on a total different frequency to everything else in the house i.e laptops iphones etc to prevent these cutouts.
I have an Airport Express and two wireless routers. The Airport Express is connected to Router 1 via Ethernet. Router 2 is connected to Router 1 via Ethernet. Since I like to know which Wireless Router I'm connected to, Router 1 & 2 use different SSIDs. Router 1 is the DHCP server (DHCP turned off on Router 2). All security settings are turned OFF.Router 1 is a Linksys WRT120N with latest firmware and Router 2 is a Belkin Wireless Router.I can connect via wireless to Router 1 and Router 2 via the seperate SSIDs and have Internet connectivity (Router 1 is connected the the Internet) and print to a wireless printer connecter to the Router 1 wireless network.
Now here is the strange thing. I can see the Airport Express only if I connect to the Router 2 wireless network!!! I cannot see it if I connect to the Router 1 wireless network, yet the Airport Express is connected via Ethernet to ROUTER 1 !So for some reason, the LinkSys WRT120N Wireless Router won't route the Airport Express to a wireless client on it's own wireless network, but it will route it to an Ethernet client which is what any client connected to Router 2 wirelesslessly is seen as. When connected to router 1 wirelessly I can ping the IP of the Airport but something is preventing it from working with iTunes/iPhone/Airport Utility. It is bizarre because these are all devices connected to the same LAN. SInce I can ping it, it tells me that it isn't a routing issue, but there must be some sort of filter between the wireless and ethernet that is preventing the Airport protocol from being transmitted.
Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how?
View 2 Replies View RelatedI've got an apple Airport Express and have managed to set it into my network. Airplay works on both Itunes and my phone. However after 10-15minutes the Airplay drops out and the network map shows that the airport express is 'offline'. however the airport express LED remains showing it still have connection to the network. The only way to get it back is to reset the AE. The apple forum has lots of people stating the same problem with WAG120n routers.
-Router Firmware V 1.00.16
-Airport Express firmware version 7.6.1
-windows Vista
How do I stream from my PC to my TV? wireless or wired
View 1 Replies View RelatedI get frequest Airport Express wireless connection drop and reconnect with my replacement e4200v2 running the latest firmware. I have it connected the 5Ghz band and set to channel 161.
View 9 Replies View RelatedIt worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.
View 14 Replies View RelatedI have a PC with the following OS and Routers
PC: Win 7 x86
iTunes: 10.6
Router: DIR-655 (Firmware Version: B1, 2.06)
My new iPad cannot connect to iTunes for either home sharing or Wi-Fi Sync.I have check the windows event log and provides the following error lists....
444: ERROR: read_msg errno 0 (The operation completed successfully.)ERROR: mDNSPlatformReadTCP - recv: 10053..The following ports have been set up in Router Port Forwarding/Virtual Servers
-TCP: 3689
-UDP: 5353
I have disabled DMZ and enabled Multi Stream Cast, but it seems no use on the problem solving.The same errors are still provided. iPad cannot in the device list if it is in Wi-Fi connection, no home sharing.As I am not in US, the local supplier latest firmware version is 2.06NA Beta1
This has finally become a BIG problem. Any time I have iTunes running and downloading podcasts, it hogs all the bandwidth for the Internet (but not the local network). This is not only slowing down access from the machine running iTunes and the downloads but for every other device trying to web browse.I'm running two Macs and one Windows/Dell PC on the network. All are hard-wired (Ethernet) to the DIR-655. How to throttle iTunes? I did some research and found that I am apparently not the only one having this issue.I'm about to bail on iTunes entirely and try to get used to Miro, which does allow bandwidth control.
View 3 Replies View RelatedIf you can't home share on iTunes between Computers or AppleTV, try turning multicast on
1) login to router
2) Go to Advanced tab
3) Select Advanced Networking on Left hand column
4) Select checkbox to enable multicast streams
5) Save the changes
In order to get all my machines working, I also had to enable multicast streams on my network extender as well. The IP address for the network extender is 192.168.0.50 or type in DLINKAP in the URL bar and follow the relevant instructions for your model number.
Please note if you use a software firewall on your PC or Mac, you may need to also free up TCP port 3689 and UDP port 5353. However there are plenty of support articles at Apple / Norton / Microsoft / etc... on how to do this for your relevant firewall..
I'm trying to get the silly iTunes Wi-Fi sync to work , and I've been told to ensure that these ports are open:5297 TCP 5298 TCP/UDP and 5353 UDP in the hardware router. How do I do this with the DIR-655 (HW version A3, FW version 1.35NA)?
View 1 Replies View RelatedI have a 655 and two TVs. One is connected to my network by a Samsung 5700 Blu Ray player, and the other is connected by x box. The x box is 20 ft away from my router and the Blue Ray is about 60 away with one wall between. The x box pulls movies down and plays them no problem, and Blue Ray takes about a minute for loading the moving, will start playing but them pauses several times throughtout the movie showing the loading sign on screen.
View 2 Replies View RelatedI am able to stream audio from a website when i connect directly to my cable modem but when the router is connected it doesnt work. I have tried resetting the router, ping the website and get "request timed out"The firmware is up to date version 2.25 I have tried other computers that access the same network and they also cant stream the audio.I have also turned off my windows 7 firewall with no luck I can access other sites I visit and stream audio just fine so I wonder if the router may be blocking something on this website?Is there a way to allow an audio stream to come through that may be blocked by the router?
View 1 Replies View RelatedI have a readynas duo connected by cable to my dir 825,and i want to stream movies from the nas to my zbox,wich has W7 32bit and a sitecom dual N usb adapter,but it seems my wireless speed is to slow for mkv and m2ts(playback stutters),when i copy a file from the nas to my zbox i get 7,60MB using a 1,33gb file,when i copy the same file from the zbox to the nas speed is a little better around 8.20MB.all my devices are in the same room.
View 8 Replies View RelatedI'd like to use VLC to view the MJPEG stream from the DCS-930L. What URL should I use to do this?
View 9 Replies View RelatedUsing as AP. Last Tuesday in the middle of a Netflix movie the video stopped. Now the wireless portion of the DAP-1522 refuses to pass any type of video. Everything else works (email, Google, Facebook, etc.). I can get to Netflix, Youtube, Yahoo, etc. .....but none of them will pass video.
Using a direct wired connection to the DAP-1522 everything works. Netflix, Youtube, etc.
Download speed checks at 17.74mbps.
I recently bought 3 DCS-920 to monitor my home while at the office. However I can't seem to get the damned things to stream video using the dyndns service. I linked my router to the dyndns account and host service. I portforward the ports my cameras are assigned. Up to this point its all good, I can access the cameras and their settings pages while outside. However both the Java and ActiveX options for video streaming do not work. Even within the network, using their raw IPs to view the cameras the videos stream works.But putting in the hostname and port they are assigned brings up the camera page, but no video.I can only assume the ports the video and audio run on are seperate, as when I put one camera's IP in the DMZ host on my router, it works with the DNS. Unforunately I can only do that with 1, and I'd rather not do that at all.
View 6 Replies View RelatedI want to set up a DLNA server (asus MB) to stream TV to my Sony Bravia (N based wifi) unit. I have a dir-655 (wonderful router) and am wondering if it will work to pass DLNA signals thru. It is hardware version A4 and firmware version 1.21... Will I need to upgrade the firmware? Can I get an HD signal?
View 1 Replies View RelatedWhen accessing the camera on mydlink, or on a browser using http://x.x.x.x/mjpg.cgi, I would expect the net bit rate to be substantially less than for a sequence of jpg's, since true motion-jpg uses a lossy form of intraframe compression typically yielding a 20:1 data reduction (according to wikipedia). Indeed, I can readily see this reduction in mjpg clips made on my Canon S5is camera. It's not clear whether that is happening with the d-link DCS-930L camera (640x480, quality "high", java).
View 5 Replies View Relatedi want to watch IP TV on my HTC DESIRE, i have DIR-655....how to setup udpxy proxy to stream ip-tv channels to my phone?
View 1 Replies View RelatedThe DCS-930L provides no date & time on video stream at mydlink, but does display those when accessing on the LAN. Is there a way to force the date/time tag to show over the web? Otherwise, remote recording might not know when an event happened?
View 1 Replies View Relatedway for one to view a camera stream without a username and pass? We are upgrading from older dlink cameras, I don't have the model handy. Previously we could just use the applet and it would display, I copied the applet from the new one but it requires a login to view.
View 1 Replies View RelatedThis causes massive 3G data to be used. If you don't close the app first it just keeps streaming and eating data + battery.This data screen cap is for 10 minutes after locking the phone with the app open.When the phone locks, the app should kill the video streaming.
View 5 Replies View RelatedHow to develop an iPhone based application which can show live streaming from DCS-930L IP camera? how to support various other IP cameras as well in the application?
View 8 Replies View Related
