D-Link DIR-825 :: Connected But Internet Drops Off?

Feb 24, 2011

I have the A1 version. I originally bought it and used it for a few months. I was very disappointed with the performance and went back to my Linksys WRT54G (running DD-WRT).

I recently decided to try it again. I upgraded to firmware 1.13. It worked pretty well for a week or so but now I am considering going back to my Linksys again. I keep losing my internet connectivity. The signal can be strong but internet becomes unavailable. Sometimes, just waiting it out works. Sometimes, disconnecting and re-connecting works. Sometimes, a reboot of the router works. Sometimes, nothing seems to work until it is good and ready to work. Sometimes, I cannot access the internet on my computer but my girlfriend still can. Sometimes, neither of us can connect.

I want to use it because I want the wireless-N speed to transfer files to my media center (and I paid a lot of money for it!) but the aggravation is getting to be too much.

There seems to be some correlation between visibility of my neighbors' networks and the connectivity issues but I could not swear to that. This is amazing to me because my neighbors are pretty far away and I can barely get the DIR-825 signal from my basement to my second floor.

View 4 Replies


ADVERTISEMENT

D-link Dir-655 :: Router Drops All Connections Once Connected Via Wifi To Specific Notebook

Jan 9, 2012

My 655 router (RevB, Firmware 2.03) is connected from one side to a DSL modem and on the side to  two wired PC's and via wi-fi to several other wireless clients (two smart phones and two notebooks). All is well until I try to connect a specific notebook. Connection is estabished for about 30sec and then the router drops ALL connections (including internet and local network!) and I must re-start him by un-plugging from power. This phenomena is specific to a specific notebook since with the other one

View 7 Replies View Related

Internet Connection Drops But Still Connected To The Network

Dec 13, 2011

no matter what device is used to connect to our Linksys WRY54G v2.0 Router, whether it be CAT6, internal wireless card (Intel Wireless LAN (802.11a/b/g/n), or USB wireless card (Linksys AE1000), she drops connections at random and frequent times and has to disconnect the device and reconnect to get internet back. She is still connected to the network though. The issue has been becoming more and more frequent the past few days and has been ongoing for a few months. We are at wits end with the issue. I looked on Linksys' website for updated firmware for the router AND the AE1000, no new firmware and same driver that is installed for the AE1000. We have tried to enable Multimedia Environment, Disable 802.11, unchecked "Automatically turn off device to save power", changed router channels from 6 to 1, have uninstalled ALL third party firewalls and AV/Spyware/Malware/Adware removal programs (but not before scanning the system), and lastly tried the DHCP Braodcast Flag Fix.

View 19 Replies View Related

Wireless Internet Drops When Connected With IPod?

Jun 22, 2011

So we run an internet connection through a DLINK Wirless router. All of our compters connect fine, as soon I try to connect through my ipod touch the connection drops. I think what happens is that my ipod shares the same ip address as my computer and it drops.

View 13 Replies View Related

Internet Drops Out When Huawei WS320 Connected

Feb 19, 2013

Just purchased a WS320 repeater so that my son can use his I-phone and I-pad around the house when he comes home weekends.Sadly, when the repeater is connected to my router the internet drops out on even my wired connections.I recently connected up to fibre and notice that the new router has the same gateway as the repeater.

View 7 Replies View Related

D-Link DIR-655 :: Wireless Internet Occasionally Drops Out?

Feb 18, 2012

I have a new DIR-655: H/W Ver. B1; F/W Ver. 2.00 NA? It is solid as a rock to my wired computers, but the Internet connection (not the wireless signal) to my wireless devices (laptops and smart phones) occasionally drops out for several minutes, many times each day. It is not necessary to reset my router to reconnect; after a while wireless Internet returns on its own. I upgraded from another D-Link router and never had this problem. In my judgment the problem appears to be the router. why the wireless Internet connection might disappear and then reestablish itself?I used an app on my smart phone to select Channel 11. No neighbors have routers close to this channel. My cordless phones are DECT (1.9 MHz). My microwave oven does not cause this dropout.

The DIR-655 wireless settings are pretty standard:

 - WPA personal security mode
 - WPA mode is Auto (WPA or WPA2)
 - Cipher is TKIP and AES
 - Group key update interval is 3600 seconds
 - 802.11 mode is mixed n and g

When this wireless Internet connection dropout occurs, the router's signal strength does not decrease; the Internet connection just disappears. Time after time I have confirmed that the integrity of the Internet connection remains solid on my wired computers and disappears only from my laptops and smart phones.I have checked the wireless spectrum when the wireless Internet connection disappears. There is no other signal, e.g., no neighbor's router on my channel (11), and the strength remains at 5 bars.

View 14 Replies View Related

D-Link DIR-655 :: Drops Wireless / Internet Connection

Aug 28, 2012

So I have a DIR-655 and my internet connection drops every day. I have replaced the DIR-655 with a linksys just to try it and it works fine. This has happened with more than 1 of these 655''s. Also I have clients calling saying the wireless drops and it will not let them reconnect until I reboot the router. I have updated to the newest firmware with the same issues. I know its not bad cause I have more than 1 655 doing the same thing at a different location as well.

View 1 Replies View Related

D-Link DIR-825 :: Router Drops Internet Speed?

Jul 23, 2009

I have had the DIR-825 since the beginning of the year connected to AT&T DSL Internet 3GB. I just upgraded to their 6GB download speed and didn't see any change in speed and suddenly I couldn't view my SlingBox anymore outside the house. I connected one computer directly to the modem, ran the AT&T speed test and got >5GB download and @700 upload. Wired via 1GB network back to the router, ran the speed test and it dropped to @4GB download and 120 upload.

I called AT&T, they checked everything, and said there was nothing wrong. I then spent almost an hour on the phone with D-Link including getting passed to 3rd level support. I knew something was wrong when the guy told me that since it was only a 1GB router, I shouldn't expect to get faster than 1GB Internet download.

The router is still running the 1.00 firmware and these are the changes they made me try so it's still sitting at these settings:

- Change the WAN from Auto 10/100 to 100 only.

- Change MTU to 1482 in my PPPoE settings

- Change Firewall Settings to turn SPI off. He said the router is still providing a firewall though.

He wanted me to download the 1.01 firmware but I balked and he said it probably wouldn't do any good. It ended with him wanting me to call AT&T back and set the modem to bridge mode. I then need to call them back and set the PPPoE again. This 3rd level support guy was very rude and am hoping to avoid calling them again.

Before I go through the hassle of calling AT&T and trying this bridge mode, or has the Elite 6GB service from AT&T and are having it work correctly.

View 15 Replies View Related

D-Link :: DIR-825 - Internet Drops When MacBook Opened

Dec 4, 2011

Have had an issue with a previous Belkin router and having similar issues with current DIR 825.  Internet is dropped when opening up the Mac Book (Using N or G).  Sometimes the internet connection still works with i Pad and iPhone, sometimes it doesn't.  As well, sometimes I can turn WiFi off on the Mac Book and then turn it back on, and it will work for about the time it takes to load one webpage and then it will cut out again.

Every time this happens I can unplug the power from the router and plug it back in which has fixed the issue in every case.
HW ver is B1
FW ver is 2.05
ISP is Cable
Modem is standalone.

View 1 Replies View Related

Internet Connection Drops Repeatedly - D-Link WBR-1310

Feb 3, 2012

I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.

View 5 Replies View Related

D-Link DIR-615 :: Drops Internet Connection And Reconnects Immediately?

Feb 13, 2012

My HW is Version B2 and my firmware is 2.25. My internet conection keeps droping and reconecting. I started off doing this a few times a day but now it does not keep a connection for more than 10 minutes.

View 5 Replies View Related

D-Link DIR-655 :: Drops Connection / Wireless - Internet Icon Goes Orange

Nov 24, 2011

I upgraded then downgraded from 2.00 to 2.03 back down to 2.00, and whenever I'm doing about 600kB/s+ it resets itself. Drops connection drops wireless, wired, and the globe internet icon goes Lambert/orange. I've reset the router to default and it still does that. What could be the cause?

I've done a lot of changing around, disabling unicast, changing from WPA Auto to WPA2, etc etc, I just changed the router to Netgear WGR614 v7 and it works perfectly fine now.

View 14 Replies View Related

D-Link DIR-825 :: Connected To PC Does Not Connect To Internet

Aug 18, 2011

I'm using an AMBIT cable modem/router with the DIR-815.The Ambit is in pass through mode.I have 2 wired machines and 1 wireless laptop. I can access the router from all the machines...but none of them can access the internet.

View 5 Replies View Related

D-Link DIR-655 :: Router Not Connected To Internet?

Mar 23, 2012

had this same problem last year and by a fluke i was connected to the internet so my wireless printer could access web services but one of my computers connected to the router kept disconnecting from the internet so i had to change the settings now i want to try to get the router connected to the internet again.  my wireless network has no internet access so i know the router isnt connected to the internet but i am online right now through the router.  My ISP is AOL Canada.  I also had a message on the computer saying that the DNS server isn't responding.  Also my internet has no network access. Also i had the router set for DHCP NOT PPPoE or whatever its called.  also what DNS should i put for the setting  or do I need to put that on router setup page for the internet. Also is there any way of stopping the other computer from disconnecting from the internet once i get the router connected to the internet? One more thing on the taskbar at the bottom of the screen where the wireless icon is theres a yellow triangle with an exclamation mark in over it  how do i get rid of that  when i had the router connected to the internet last year the yellow triangle was gone.  And right now on the network map its showing an x through the line going from the router to the internet which i know means theres no internet from the router.

View 14 Replies View Related

D-Link DIR-600 :: No Internet Access Even Though It States As Connected

Aug 28, 2011

For an intro, Dir 500 H/W C1, FW: 3.02. I�m getting this annoying error that seems to fallow every-time I boot up the router after being shut off, for example, my supply (Electricity) doesn�t tend to be fluid around here so sometime the device need to be shut off (Constantly or 1 time in a daily basis) it is connected to an UPS though. After everything is up and running again I get the classic yellow sign on the tray-bar internet icon stating as connected but without Internet Access?With no way to access the internet when connected to the Dir-600, I go back using my primary router to and search for the problem, ending with nothing at hand but hard-resetting or plugging the power off kind of advises, e.g; The plug-ing off method seems not do the trick anymore, ending up only with the option of reset-ing the router to its factory status which is even more annoying to do every time I want it to function properly?

View 3 Replies View Related

4-5 Connected To Router And Connection Drops Randomly

Jan 23, 2011

Here's the problem, there are 4-5 computers connected to their router's network through both wire and wireless. Some of the other computers are used to stream tv dramas and what not, and it really kills the connection and I am barely even able to open a simple webpage.

View 2 Replies View Related

New D-Link Modem / Router Connected But No Internet Access?

May 19, 2011

My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.

Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model

[Code].....

View 4 Replies View Related

D-link Di-614+ Connected To Wimax - No Response But Internet Works?

Jun 18, 2011

I've got the Di-614+ connected to a Wimax system. The Wimax is plugged into one of the LAN jacks in the Di-614+ (i tried pluggin it into the WAN jack but it does not work). I'm able to use the internet fine without any problems using the wireless connection on my laptop.

The thing is the ip 192.168.1.1 is set to open up the setup page of my Wimax modem. I cant seem to access the setup page of my Di-614+. I tried disconnecting the Wimax jack, and still google chrome just responds with "This webpage is not available". My other option is to hard reset the wireless router. But i worry it will ask for a password and i wont know it.

View 5 Replies View Related

D-Link DIR-615 :: Computers Connected To LAN Through Switch Could Not Access Internet

May 8, 2011

My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.

View 7 Replies View Related

D-link DSL-502T Network Connected But Internet Connection Failed

Mar 1, 2011

Setup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections

No.1 Connected to the Belkin & Internet working

No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2

When I attempt to connect to the internet on computer No.2 it will not connect.

1. Belkin setup page shows both computers in the DHCP client list
2. Tenda shows connection to the personal network
3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble.
4. No icons in 'Network Connections'
5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.

View 1 Replies View Related

D-Link DIR-655 :: New Laptop Looses Internet But Stays Connected To Wireless

May 14, 2013

I have a DIR-655 Rev B1, FW 2.01 (I will probably upgrade the FW tonight to the latest.)

I have at least 20 items that connect wirelessly to this router (2 PCs, 2 Laptops, 2 Tivo Box, 3 Game Consoles, 3 Cell Phones, 2 Tablets, 2 TVs, Printer, AP Gateway, and some other projects)  It's been a solid connection to everything for the past couple of years.

I bought a new Dell Inspiron 15r SE laptop (uses the Intel Centrion Wireless-N 2230 Wifi Solution.)  After anywhere from 2 - 10 mins of browsing/watching a video/downloading files the access out to the internet simply stops. 

At this point I'm still connected wirelessly to the router, and if I go to the router address I still have access and can login and see the router settings.  I check and there's plenty of time left on the lease (days.)  Still not getting internet access.  Eventually my Laptop will disconnect and reconnect (or I do it manually.)  I've performed hard resets of the router, I've had my laptop Forget the network and then reconnect, etc.  Nothing has resolved it. 

I thought it may be my laptop, but I've taken it to Starbuck, Work, Neighbors WiFi, etc and I don't have any problems staying connected on their networks.

I've had Dell on the line, we connected hardwired, and there solution was to force forget and reconnect to the router, which worked for the 10min he was on the line with me, but then failed soon after, and back in the same connectivity hell 

View 4 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 / MTS 2G Dongle / Connected But No Internet Access

Mar 8, 2013

Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : MTS

i am using tp-link router tl-mr3020.. having problem with internet access..it shows my isp (mts) network and got connected also.. it also shows me send and receive data.. but there is no internet access through web browsers .i have tried multiple web browsers (IE / Chrome / Mozilla Firefox)..but the problem remains same.. my ISP network is MTS .. Huwai Device EC-122 with CDMA 2G network.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: Connected Wireless To TL-MR3040 But No Internet Access

Mar 19, 2013

Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : MAXIS

I've got an issue with my TL-MR3040. Need assistance.- Modem HuaweiE398 (Identified) and connected to internet as seen on the webgui. Connected to my TL-MR3040 via wireless and connected BUT no internet access to the web.Tested using RJ45 cable to direct connect PC to Router, NO ISSUE with internet access to web.Need to know is my TL-MR3040 got defects or faulty?

View 1 Replies View Related

D-Link DIR-655 :: Blue And Orange Blinking At Same Time - Internet Still Connected

Nov 5, 2011

i have a PPPOE type of connection for my modem and just now my router is blinking both lights Orange and blue at the same time....but the internet is still connected..

View 14 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 Ghz Connected But Not Internet

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : time warner

This is frustrating I owned the router for about 2 weeks. my 2.4ghz is out. Basically I connect to the router on 2.4 can get into the tp-link admin webpage for the router but no internet at all. if I switch to 5 ghz everything works great, or if i use direct connect wire everything is great. I tried disabling NAT but that shut down all my internet connections across all links and manually switching to channel 1 did nothing at all i also tried channel 7. Ideas why only 2.4 ghz is affected out of the blue all of a sudden?

View 12 Replies View Related

D-Link DIR-655 :: Slowing Internet Down But Fine When Directly Connected To Modem

Jun 9, 2011

I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.

I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.

View 12 Replies View Related

Linksys Wireless Router :: Speed Drops When Connected Through E3200

Mar 7, 2012

Got a Linksys E3200, and a gigabit card, even two, Realtec and Intel, have a connection ggbit. If the power cord plug directly into netcard, all at great, the tracker up to 80 MB per second, shakes on speedtest.net, shows 780 240 + Mbps. When i connect my inet through the router, the speed drops to 12 MB(100 Mbit) and speedtest the same, but in the the web interface in the statistics shows that everything is connected to a gigabit.

Plus, when I ping my ISP's website (ip -t ) and assume [URL] click on the test, the router with 1ms pings are beginning to rise to 30 ms, and when it is directly in netcard, it stable 1ms.... When through the router, torrent shake it just do up to 100ms jumps. I have all the settings , and set up his hands, and a manager, all for nothing. It started five days ago, before that everything was ok. Can a router burn? Rather it gigabit controller?

View 4 Replies View Related

D-Link DIR-655 :: Connected A Wired Weather Internet Bridge To Another Ethernet Port

Feb 14, 2013

I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients.  I have my primary computer/desktop PC connected via wired connection.  I also have several wireless clients (laptop, iPad, iPhones, etc.).  All have been performing normally.  However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.

It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website.  This continues as long as I'm using the desktop PC.  When I stop using the desktop, the weather bridge resumes normally.

I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it.  It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work.  I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.

On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion.  According to the settings, it can do 10 or 100, full or half.  I have it set to AUTO.

View 3 Replies View Related

Linksys Wireless Adapters :: E2000 / Signal Strength Drops To 50% When Connected

Jan 2, 2012

I have the following problem:
 
Adapter: WMP600N
Router: E2000 (N-only)
OS: Windows 7 X64
 
When I'm not connected to my wireless network, the signal strength is 4 bars (out of 5)Once connected, it drops to 2 bars. Speed is 39 Mbps. Why?I have updated the drivers (strangly, it says the drivers are from Ralink Technology. Corp, version 3.00.00.0041 built by: WinDDK)

View 4 Replies View Related

Linksys Wireless Router :: E 2000 Drops All Connections When Connected With 4th Wire

Sep 2, 2011

The router works fine until I plug the 4th wire in the back, which goes to a 2nd desktop computer, then it is only a matter of time until the router drops all internet connections including the direct wire to desktop #1, wireless, and the other two wires.This is my 2nd e2000 router since Amazon replaced the first one after about 4 months as it was having the same problem.

View 5 Replies View Related

Linksys Wireless Router :: E3200 Drops Ethernet Connected Computer

Feb 1, 2013

Running Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications),  in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200.  Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity.  Things I have done to date: removed Linksys E-series software and reloaded,  updated drivers, changed all wiring to router, and checked IP addresses and they are different. 

View 2 Replies View Related

Cisco LAN :: 1801 Unknown Protocol Drops On Connected Router Interface

Oct 28, 2008

I have a 1801 router connected to a 3550 switch with a regular 802.1q trunk, and I am curious as to what may be causing the unknown protocol drops on the connected router interface.
 
The switch is without any configuration at all except the following for the trunk configuration on the interface connecting to the router.
 
Switch:
-interface FastEthernet0/1
-switchport trunk encapsulation dot1q
-switchport mode trunk
 
Router:
-Interface FastEthernet8
-switchport mode trunk
 
There is nothing connected to the switch other than the router so the dropped traffic must be originating from the switch itself.The unknown protocol drop counter on the router increments by one every 30 seconds, and I tried using a packet sniffer but nothing noticeble showed up.
 
I read elsewhere on these forums that it might be udld, but that is not enabled by default, and just to be sure I tried disabling it on the interface and as expected it said it was not enabled, so I am ruling that one out.I also read that it could be because the router is recieving traffic from other protocols than IP, but I do not see how it applies in this case.

what does a 3550 send every 30 seconds that my 1801 does not understand?Could it have something to do with STP?

View 6 Replies View Related

Cisco WAN :: Drops In WAN Link 512

Jul 3, 2012

We have 512 link and observe output drops and application timeouts. Link utilization is not very high.When ping with 1500 bytes, it shows output drops and when ping with default packet size, no output drops observed.
 
Service policy also in effect and shows some drops.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved