D-Link DIR-825 :: MAC Filtering Blocks Allowed Devices After Several Hours
Jan 28, 2012
I have yet another problem now with the DIR-825. I have a DAP-1522 that I connect my multimedia devices to like my TV, BD player, etc.
For added security, I use MAC filtering to only allow access to my devices that connect to my router. However, after several hours, the devices connected to my DAP-1522 can no longer connect and neither can I connect to them. The odd thing is that I can connect just fine to the 1522 itself. I NEVER had this issue with the DIR-655 so I figured it had to be the 825. After trying several things, I essentially narrowed it down to the MAC filtering.
If I turn MAC filtering off everything works fine all the time. If I turn it on, everything works fine for several hours, even up to a whole day, but then eventually my devices can no longer see or be seen.
View 14 Replies
ADVERTISEMENT
Oct 25, 2011
I recently bought a new laptop (lenovo G560e) running win 7. when i turn it on it disables our old laptop also win 7 my android and console. If i turn on old laptop first everything is fine its so annoying.
i will paste ipconfig/all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMikey>ipconfig/all
[code]....
View 5 Replies
View Related
Dec 25, 2012
Am I limited to how many devices can connect to my wireless router 802.11g
View 2 Replies
View Related
Nov 30, 2011
Is it possible to get both allowed and blocked web access logging? I'm using the 2.06NA firmware and no matter how I configure the router, I just can't get it to work, so either I'm missing something or the firmware has a defect, I hope its me, but I fear its a defect.
View 6 Replies
View Related
Oct 24, 2012
I have tried to setup access control by setting up a policy that restricts certain MAC addresses during a period during the day from certain websites. I set up the website filter and a schedule and selected them for the policy. Instead of blocking just the websites on the filter list during the time setup in the schedule, it blocks all websites all the time.I made sure that I setup the policy to 'block some access' NOT 'block all access'.The only thing that seems to work is that only the computers with the MAC address selected are effected.
View 3 Replies
View Related
Dec 28, 2012
I have a simple set-up: a DIR-655 with 2 devices plugged in to it. The Plex Media Server runs on Ubuntu Linux and acts as the DLNA server to a PS3 DLNA client. Both are hard-wired with ethernet cables to the DIR-655. In this set up the PS3 has trouble discovering the PLEX server via DLNA. A 'search for DLNA devices' on the PS3 fails to return the PLEX. Eventually, after some strange time interval ranging from 2-30 minutes, the PLEX server will show up on the PS3's list.
I attached a simple ethernet switch to the DIR-655 and then attached the PS3 and Plex/linux server to it. The PS3 now finds the Plex DLNA server INSTANTLY ... without even having to scan for servers.
It appears that the DIR-655 is trying to be 'useful' in some way by filtering some sort of traffic; multicast/igmp I assume. There don't appear to be any settings in the GUI to alter the Multicast/IGMP/DLNA/UPnP behavior in the LAN ... other then "turn UPnP on."
Note that this is hardware B1 and firmware 2.00NA.
View 1 Replies
View Related
Aug 12, 2011
I purchased a Epson Artisan 835, which I am runnung wireless. When I try to check the ink levels from my laptop they are all greyed out. Epson tech said the Dir-655 was the problem and that I needed to get the router to give permission for the ink levels to go through.
View 14 Replies
View Related
Oct 23, 2012
I have fiber optic net, going into a TP Link 1043 ND router out in my garage.All of the 4 lan ports go into one of the rooms in the house. I also have two more routers of the same kind, one downstairs and one upstairs.They are configured in a way, that DHCP server is only turned on, on the one in the garage, the other two act as switches.My problem is that 50 % of the time I can't acces facebook, and some other random sites.The interesting bit is that when I chat with someone on FB, I can see what they write, but my message doesn't go through.The way it goes, is that I can browse on facebook for like 5 minutes, after that its unavailable for another 5 minutes.I can still access the site from my smartphone, but only if its not connected to the wifi network, meaning the problem is somewhere within my setup.I've already tried turning the router firewall off, but that doesn't make any difference.
View 1 Replies
View Related
Apr 14, 2011
I have recently moved into a new house that has a DIR-615 router. I have noticed with the router that it will drop the wireless connections after roughly 24-48 hours. The SSID will no longer be broadcast, however, the computers that are wired are still connected.I currently have the E3 hardware version, plus 5.10 firmware on the router
View 4 Replies
View Related
Jun 22, 2012
So I've bought a D-Link 815 on 21st June(day before yesterday) and my connection drops every 10-12 hours and i have to close and open the router(the 192.168.0.1 site won't even work)...i'm using PPPOE connection..
I've bought a D-Link because i heard it's the best on the market and i play online poker so i need a stable connection all day long and more important i need my IP to remain at one value for a long time and not change every 12 hours(i have dynamic IP)
View 14 Replies
View Related
Jun 4, 2012
Every few hours, the WAN just shuts off. If you were connected to it when this happens, you cannot reconnect until you have reset the router; you can't even find the SSID. If you were not connected when this happens, you can connect just fine. This happens with all devices in the house, my laptop, my DAP-1522, my cell phone, and my brother's Mac (SMH, sometimes I think we aren't related...). I am running version 2.00NA on B1 firmware.
View 3 Replies
View Related
Jan 7, 2013
I have been using DIR 615 at home for around one year. Now I notice that after some time of continuous usage (say around 3 4 hours) the Wireless network is lost. Thereafter only reboot brings it back. I checked for any latest firmware upgrade from admin page, but it says device already has the latest.
View 7 Replies
View Related
Feb 4, 2011
I am using DIR-655 A4 router and I have a server that needs DMZ and a PC that needs a port.So, I have set the dmz to 192.168.0.100 (SERVER) and set the port 2000(or any) to forward to 192.168.0.2 (PC).What I found out was, the port forwarding works well for several hours and suddenly it fails and won't forward until I reboot my 655 router. I am really tired doing this every day. I tried firmware 1.21 to 1.35 and non of them were good.I know that 655 has good performance compare to its price but I think it has world's worst firmware.
View 9 Replies
View Related
Oct 30, 2011
I just recently purchased a D-Link 615 and i've been having disconnection issues with the internet. Every now and then the internet connection disconnects and i have to reboot the router to have internet access again.
View 1 Replies
View Related
May 12, 2011
I am using a D-Link DIR-655 REV B (Firmware: 2.00NA) wireless router. The problem I keep having is that the internet will randomly disconnect and it happens to all my computers. I am not sure if it is the router or the modem that is causing this. The internet service provider that I am using is Time Warner Cable and the modem is an ARRIS TM502G.I have tried resetting the modem and the internet seems to come back. Same thing happens if I try to reset the router instead of the modem. I have also tried restoring the router to factory default settings and that didn't seem to work.
View 11 Replies
View Related
Feb 19, 2011
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies
View Related
Oct 16, 2011
I'm using my 655 as a WAP, so nothing is connected to the WAN port. Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page. Even if I put the connecting PC's LAN MAC in the tablet.
View 9 Replies
View Related
May 26, 2012
I have my D-link DIR 600 and I never had problems with it until now. For the past three weeks, my router keeps on disconnecting my Desktop P.C. from which the main internet cable is connected. Whenever it happens, I try connecting my Netbook over a WiFi connection using the same router; and even though my desktop can not connect to the internet, my netbook still can. Apparently when it happens, the [3] (the 4th light in the image) light goes off, and I have to restart my Desktop P.C. for it to turn on again and to use the internet again.
View 1 Replies
View Related
Feb 18, 2013
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL
I Bought this w8968 a month back.. It was working alright till a few days back. When i connect and start browsing or downloading, it goes OK.. but after a few hours(sometimes 2, sometimes 1), It stops responding and I couldn`t ping 192.168.1.1 either through WiFi/Ethernet. Status indicators for DSL/WIFI/Internet/LAN all glowing as though nothing wrong with them..? The router is not that much hot when this happens.. When i switch off the router and then on, The Prob gets solved only to reappear again in 1/2/3 hrs..
View 3 Replies
View Related
Jun 13, 2012
I am having a very frustrating issue with my wireless D-LINK 615 (firmware 5.0.1 NA). The internet connection drops constantly every 2-3 hours. Here are the settings on my router:
Cable modem
Modem Motorola Surfboard model SB6120
Code...
This seems to happen after I upgraded the firmware. Before that, did not get a complaint from my children or wife. Before I squeeze the last drop out of this lemon.
View 3 Replies
View Related
Dec 7, 2010
I have a wireless schedule setup on my DIR-655. Works great. Now I would like to run different hours on different days. Have wireless up on certain hours during the week, different hours on weekends.
How do I set up a schedule to one one set of hours during the week, and a different set of hours during the weekend?
View 1 Replies
View Related
Dec 26, 2012
Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I got a new TP-Link TL-WDR4300, connected it to my online pure sine wave UPS like I did with my previous routers with no problem.After about 24 hours, router crashes - no access to web interface, no internet (wired or wireless), must reboot to get it to work again.Router was replaced, same problem with new router.The firmware is the latest one and is customized for Israel because of 5GHz limitations.I was told by the representative in Israel that I should try to connect it to another AC outlet instead of the UPS.
View 7 Replies
View Related
Apr 23, 2013
Region : UnitedStates
Model : TL-WR940N
Hardware Version : V1
Firmware Version : TL-WR940N_v1_120201
ISP :
Just bought a TL-WR940N and it was always loosing connection and freezing / locking up. I upgraded to the latest FW from the link below URL but it still freezes and loses connection to devices after 8-12 hours, keeps hanging up and pages sometime don't load.
View 14 Replies
View Related
Oct 15, 2010
I tried to find an answer to my issue however came up short. Did find,url... but that for a 600 not 601. I have "Mac filtering on and to only ALLOW the addresses below" however, it allows any computer, even if i do not have them listed.
View 3 Replies
View Related
Jul 12, 2012
I have dlink dir-600 router and I want to block access to website [ URL] for only one PC connect to router. i can either block web access to both PCS connected or block entire web access to one PC.
View 1 Replies
View Related
Dec 9, 2012
Region : Poland
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : [url]...
I'm having issues with DHCP server not dealing IP after few hours (varies between 1h and 8h) of torrent traffic. If no continuous torrent traffic is applied, the problem does not occur. New wireless devices connect to the wi-fi network, but get stuck on 'getting IP adress'. The problem is with DHCP service or the wireless network service. New wired devices receive IP. The problem is only with wireless devices. I have no additional wireless device, that I can configure the network settings on my own (only phones) to check if it works without DHCP server giving IP. Wired connection is stable, but the bandwidth usage curve becomes somewhat similar to a sinewave.
I did disable the hardware NAT because that feature made the router unstable and caused it to hang up within minutes.
View 7 Replies
View Related
Feb 7, 2012
I have come across articles mentioning that URL Filtering can be implemented by using ASA 5505 with URL Filtering Servers. But Websense and other Web Filtering Servers are paid ones ? Are there any free solutions available ? What exactly is N2H2 ? The reason is I don 't want to increase the CPU utilization of ASA by implementing URL filtering within the device. If I have around 30 nodes which connects to the internet via a 2Mbps line through ASA 5505 and if I want to block around say 10 or 15 URLs , will it increase CU utilization beyond permissible limits ? Currently the CPU Utilization is around 10 - 15 . Here's the infrastructure setup .
------------------------------------------------------------
Nodes -->Switches-->ASA 5505-->Internet
-------------------------------------------------------------
View 4 Replies
View Related
Feb 12, 2011
My network is set up in the following way..
DSL-320B | Linksys E3000 192.168.0.0/24 Subnet A Static Route 192.168.1.0 255.255.255.0 192.168.0.100 | Wan Port 192.168.0.100 DIR-655 | DIR-655 192.168.1.0/24 Subnet B
I am unable to browse by IP any machines on Subnet B from Subnet A and suspect this is due to the NAT and the Endpoint filtering within the DIR-655.
View 2 Replies
View Related
Jan 17, 2011
It seems (and should be) pretty straight forward; under ADVANCED go to WEBSITE FILTERING and enter in the URI, or partial URI, that you want blocked and make sure the drop-down menu is "DENY computer access to ONLY these websites". The only problem is, I can still get to all of them. I saw in another forum that you had to check "Enable Access Control" and go through a 6-step process where you specify machines - I truly hope that isn't the solution, because it's needlessly complicated for most users who only want to block ALL devices on their network from accessing certain sites. My Hardware Version is B1 and my Firmware version is 2.00NA.
View 2 Replies
View Related
Jan 23, 2013
Where on my router interface I could go to enable both the SPI Firewall, and the Wireless MAC Filtering? I have the D-link DIR-815.
View 1 Replies
View Related
May 20, 2011
DIR600 doesn't allow me to enable wireless MAC filtering when I setup DIR600 as access point. (I connected DIR600 (access point) to my another room's router.)
View 1 Replies
View Related
Jul 10, 2011
I would like to know how to configure my DIR-600s firewall UDP Endpoint Filtering. I ve read some guides and I ve got to configure this to Endpoint Independent in order to play League of Legends. The problem is that I can see the option Firewall & DMZ but then I don't see the UDP or TCP Endpoint Filtering options.
View 1 Replies
View Related
Jan 23, 2013
I have had a great experience with my old DIR-655 (rev A) router. However, I would like to upgrade to a newer and better D-link router for my home that contains many well-connected children. Which routers are like my DIR-655, and have better overall performance than the DIR-655 without necessarily using the benefit of the 5 GHz second band. What better performing routers can record more than 24 MAC addresses in the Network Filtering area? I understand many people don't agree with MAC address filtering, but I like it to keep my kids from giving out my network password to all the neighbor kids and their friends too. So, MAC address filtering works for me. Or, should I just get an updated version of the DIR-655?
View 5 Replies
View Related
