D-Link DIR-825 :: Using As A Repeater?

Aug 16, 2011

I was wondering if it possible to use the DIR-825 as a repeater. My main router is a Airport Extreme but it doesn't reach the whole house. Now what I'm also wondering if I can use the repeater as well as a SharePort for my external hard drive while it is being used as a Repeater.

View 4 Replies


ADVERTISEMENT

A Repeater For D-Link DI-624?

Oct 23, 2011

I have a D-Link DI-624 router and I understand that I can convert this router to a repeater using on line software thus allowing me to extend a wireless signal from up to a 1/4 mile away

View 1 Replies View Related

Put D-Link DIR-615 C1 In Repeater Mode?

Oct 5, 2012

I just recently upgraded my home router from a 615 to a 655, so I thought I would use the old router as a repeater bridge at another location.

I read that the DD-WRT firmware offered a repeater bridge function, so I successfully flashed the 615 C1 with the latest release 7/12.

I get all of the configuration steps, and even have set up client bridge mode. My problem is when I bring down the list of available wireless modes, repeater bridge isn't on the list.

Is the C1 version not able to do this? is there something else I need to do to enable a repeater bridge?

View 4 Replies View Related

Use My D-link Router As A Repeater For Wifi?

Apr 8, 2013

I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.

View 1 Replies View Related

Getting TP-Link Universal Repeater Setup?

Mar 22, 2012

facing issues with TP-Link TL-WA801ND while setting it up as a Universal repeater.The AP is a Linksys E3200..and I got the TP-Link to broaden my WiFi at home, I was successful in setting it up, however, after a day or two I get prompted to enter a "WPA2 Enterprise" username/password.I DID NOT setup WPA2 Enterprise, mine is WPA2 Personal...it's peculiar that it works for a bit then reverts to Enterprise.

View -1 Replies View Related

Convert A D-Link Router Into A Repeater?

Dec 7, 2012

How do you convert a D-Link router into a repeater?

View 1 Replies View Related

D-Link DIR-825 :: Wrt54g / Can It Be Setup As A Repeater

May 24, 2011

Can a dir-815 be setup as a repeater?? I have a Linksys wrt54g as the main router can the dir-815 be used to extend the wifi range of the Linksys router.  If the dir-815 can be setup as a repeater how would I go about setting it up as a repeater?

View 3 Replies View Related

D-Link DIR-601 :: Setting Up A 601 As A Wireless Repeater?

Feb 23, 2011

I want to extend the range of the wireless network using a 601 (or just a relatively lowend N series). Can I just set a 601 as a repeater? Not seeing anything in the manual that provides instructions. I don't have the ability to cable the routers together.  I want to do it all wirelessly if possible.

View 1 Replies View Related

D-Link DIR-628 - Best Option For Homebrew Wi-Fi Repeater?

Mar 11, 2011

My D-Link DIR-628 is at the far end of my house (next to my desktop and cable modem) and my PS3 and laptop are at the other end of the house in my living room. I'm not sure what's in my walls but it is NOT WiFi friendly!

[code]....

So I was thinking about buying a cheap N router and flashing it with DD-WRT and putting it in the living room.

I'd like this 2nd router to:

(a) Plug into the PS3 thereby "upgrading" it's crappy wireless card to something faster
(b) Have it act as a WiFi repeater to boost coverage on the far side of the house.

So is this going to work the way I'm describing it here? That's my current understanding based on what I've read, but I want to make sure I'm not missing something before I order the hardware.

View 1 Replies View Related

TP-LINK (TL-WR541G / TL-WA500G) Repeater Not Connecting?

Dec 31, 2011

My setup consists of the following: TP-LINK Router Model No. TL-WR541G and TP-LINK Wireless Repeater Model No. TL-WA500G.I've set the Wireless Mode Settings to Universal Repeater and turned on MAC filtering. My problem is that when I connect to the wireless repeater with a phone or tablet (both working on android) it just wont connect. It gets stuck on "obtaining ip address". The wireless repeater works fine with any laptop, pc, netbook etc. I made sure that all the MAC Addresses are entered correctly. Also the phone and tablet connect fine to the router, but when the router is out of range and it tries to connect to the repeater it doesnt work. I tried all the basic troubleshooting techniques i.e. turning off wifi, turning off repeater & router.

View 6 Replies View Related

Tp Link Wifi Range Repeater Keeps Locking Up

Sep 9, 2012

I have the main router, which is SMC SMCD3GN from Rogers in Canada, and I have heard from MANY people that this router REALLY sucks..especially the range. And I myself also had problem with low signal in the 2nd floor of my house, so I purchased the wifi repeater (TP Link) to extend the range. I followed the guide given in the box, and everything was set up flawlessly. However, after a few hours of use, all my devices (laptop, tablet, phone) which are in the same room as the repeater decrease the signal again, to the point where it was before I purchased the repeater. Then if I disconnect the wifi and reconnect, the signal is full again. Sometimes I have to unplug the repeater from the wall and replug in order for it to work.

View 2 Replies View Related

D-Link DIR-601 :: Can Make A Wireless Bridge Or Repeater

Nov 15, 2011

i just happened to have a spare DIR 601 and I already installed DDWRT on it. Now my question is can make this as a wireless bridge or repeater? with only using the signal of my DIR 655 router upstairs?

View 4 Replies View Related

D-Link DWL 2000AP+ / Windows - Configure Wi-Fi WAP As Repeater?

Apr 2, 2013

I have Dlink DWL - 2000AP+.

What I want to do is, to reproduce WiFi signal (from TP-LINK modem) by repeating with D-Link Wireless Access Point.

Here is how web interface looks. There is an option for repeating:

After clicking Site Survey I see all list of available networks. When I select one of them, the D-link saves changes then reboots. After that, Windows shows me something like that on available WiFi networks list:

<Repeated network name> 2

The problem is, when I connect to this network, Windows connects directly into root source, not to my WAP (I see this with inSSIDer utility).

View 1 Replies View Related

TP-Link 3G/3.75G Router :: Using TL-MR3220 As Repeater Behind ADSL Modem?

Jan 26, 2013

Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP :

I am connected to the internet via a non TP=Llink ADSL2 modem/router supplied by my ISP.I was using my TL-MR3220 as a 3G modem but no longer need it for that purpose. I was wondering whether I can now use my TL-MR3220 for two other purposes: as an additional wireless access point and as a means of linking equipment (i.e. printers) to the home network . i have tried connecting the ADSL2 modem/router to the TL-MR3220 via an ethernet cable (one of the 4 LAN ports on the ADSL modem/router to the blue WAN port on the TL-MR3220) but I can get no internet connection through the TL-MR3220.Is this normal i.e. something that the TL-MR3220 is not designed to do, or am I just using the wrong settings ? I have tried a whole range of different settings but none seem to work.

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD8951ND - Possible To Use Router As Repeater

Apr 29, 2013

Region : Others
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Nepal Telecom

My router said it has Wireless Access Point and WDS.I think to use this router as a repeater?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Repeater On TD-W8151N With TL-WR740N?

Dec 22, 2012

Region : Vietnam
Model : TD-W8151N
Hardware Version : V1
Firmware Version :
ISP :

I'm using a Tp-Link's Product (TD-W8151N). But now, i want to using TL-Wr740N repeat the Wifi from TD-W8151N. How can i do that?

View 2 Replies View Related

D-Link DIR-655 :: Wireless Range Extender Or Repeater / Booster

Nov 20, 2011

I am moving my office from one side of the house to the other which has real spotty wireless coverage. Most likely I will not be able to move the modem or wireless router, so I have to somehow increase the range.I did some research and poking around on forums, but I can't find a clear cut, number 1. What you think would be the best option to pair with the DIR-655.

View 1 Replies View Related

D-Link DIR-615 :: Main AP With DHCP Server And PPPoE / Repeater

Nov 20, 2011

I have two DIR-615 devices, I want use first device for main AP and DHCP server and PPPoE . And use second device for Repeater.

How to work WPS and Push button on this device.

View 6 Replies View Related

Using Repeater To Extend Signal Of Access Point Both TP-Link TL-WA901ND?

Jan 9, 2012

Im in abit of trouble trying to setup a wireless network. Part of the problem is that I am many miles away and I've never setup a wifi-netork involving more than one device, that device being a router.I connected the TL-WA901ND to the router(a Thomson tg787) located in the house, this router couldn't be used simply because the SSID and its password is locked, and we sometimes have people renting the bottom floor and we would prefer a better SSID and a changable password for the network. The first TL-WA901ND(will call this one TL1(AP) from now on, the other being TL2(RP)) is set to operate as Access Point, having a different SSID and password for the network, and it works great. However, when I try to set the other one, TL2(RP) to repeater mode, with the TL1(AP) and that SSID/MAC as "target", it doesn't seem to work. I've tried using bot the repeater mode and the universal repeater mode but none of them seem to do the job.Is is possible to repeat the signal of an access point or does it have to be a router? The SSID and the WPAkey of the repeater is set to the same as the access point, is that correct?The access point is not the one handing out IP-addresses, the router is still acting as the DHCP-server, is that correct?

View 1 Replies View Related

D-Link DIR-655 :: Configure To Join Existing Wireless Network As Repeater

Jan 29, 2011

I'd like to give my DIR-655 (rev. A4, firmware 1.32) to my brother for use as a repeater, to work with the weak signal in his apartment.  But I don't see any way to configure the device to join an existing wireless network.  Am I wasting my time?

View 7 Replies View Related

D-Link DIR-655 :: Using As Wireless Repeater / Access Point / Bridge To Connect

Apr 12, 2011

I have an ADSL2 connection at home served by a DLINK DSL-2760U modem+router . I also have a DIR-655 router.Is there any way I can use the 655 as a wireless repeater/access point/bridge to connect to the 2760U (reception issues between the floors)?

View 1 Replies View Related

D-link DIR-655 :: Setting Up Access Point / Repeater For Home Network

Jul 21, 2011

I am looking for an equipment recommendation for setting up an access point/repeater for my home network.

I have comcast > surfboard > d-link dir 655 I want to add another router/access point so I can move the dir655 to my office and have my computers connected over gigbait. All my comcast stuff is setup in the living room, and I would like to setup the access point there. Something like

comcast > surfboard > ddwrt n-router (living room) > dir655 (in office) > desktop

View 2 Replies View Related

Linksys Cable / DSL :: Connect TP Link 901ND Repeater To Cisco WAG160N?

May 4, 2011

Connecting my TP Link 901ND repeater to my cisco WAG160N.  Modem router is working well but repeater doesn't seem to be repeating the signal.

View 1 Replies View Related

TP-Link TD-W8960N - How To Use Thomson Speed Touch TG587nv2 As Secondary Wireless Repeater

Feb 10, 2012

I am using a TP-Link TD-W8960N as my main router with ADSL connection. It works fine but on the top floor our signal is pretty low. I want to us the Thomson SpeedTouch TG587nv2 (O2 Wireless box IV) as a secondary wireless repeater. I can't use a ethernet cable between them. I want to make a wireless bridge or use WDS.

View 3 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR702N - Repeater Mode Signal Fades Out Or Does Not Work At All

Jan 31, 2013

Region : UnitedStates
Model : TL-WR702N
Hardware Version : V1
Firmware Version : 4.18.107 Build 121123 Rel.31456n
ISP : COMCAST

This is the 2nd WR702N I have purchased. The first worked as a repeater for a short time and then failed with the fading symptom. I returned it. The second did not work as a repeater even for a short time. The signal is OK for a few seconds and then fades out. I updated the firmware.

View 1 Replies View Related

Tp-link 150mbps Wireless :: Wr700n Difference Between Wifi Range Extender And Repeater

Apr 9, 2013

Region : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :

Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?

View 1 Replies View Related

Connecting Tp-link Wa901nd Access Point As Repeater Without Access To Router

Oct 21, 2012

I have just moved into a new apartment that has a free wifi connection the problem is that my apartment is in the basement at the completly opposite side of the office and i cant get a strong enough signal to connect to the internet and im not very good with computers. the first time i tride setting up the repeater i was able to connect everything and get online but it had changed the ssid and when i tride to change it bacck to its origanil name i lost my internet connection and have not been able to get access the internet again.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Duron(tm) processor, x86 Family 6 Model 8 Stepping 1
Processor Count: 1
RAM: 479 Mb
Graphics Card: S3 Graphics ProSavageDDR (Microsoft Corporation), 32 Mb
Hard Drives: C: Total - 24385 MB, Free - 3678 MB; D: Total - 13776 MB, Free - 13649 MB;
Motherboard: , KM266-8235
Antivirus: None

View 3 Replies View Related

Setup A Repeater On CG3000?

May 18, 2012

Extending wireless network range with a repeater HP and Netgear - YouTube my reapter is a old netgear router n150 wondering if its possible.

View 4 Replies View Related

DIR-601 Dlink Router - To Use It As Repeater

Mar 7, 2012

I have already successfully upgraded the firmware to DD-WRT with no problems.What I want to do is have the D-Link DIR-601 Router set as a Repeater Bridge because I am trying to expand my wireless signal to dead spots in the house.I have NO SECURITY enabled on my NetGear Router and I am still unable to successully setup the D-link DIR-601 Router as a Repeater Bridge.

View 2 Replies View Related

Inconsistent Performance Through Repeater

Jan 1, 2013

I have a fairly large area to cover with wireless, and set up a second router to act as a repeater. The signal works great, other than being extremely inconsistent. Sometimes I get a speedtest of 18 ping and 7 mbps DL to a nearby server, and 10 seconds later it's 300 ping and 2 mbps. There are no problems when using the primary access point without the repeater. Where should I start in troubleshooting? I can't see why there would be such terrible consistency since much of the time the signal strength is fine. It's purely a problem of dropping the connection often.

View 1 Replies View Related

Setting Up A Repeater Router?

Sep 26, 2011

I have a very large house with many people using wireless laptops. i used to have verizon internet and I purchased a wlan 11g mini router from radio lads. After it was set up it worked great. I have just switched to comcast internet (my first mistake) and I can't get the mini router to work.

View 1 Replies View Related

Making A Server Through A Repeater

Feb 22, 2012

i want to make my minecraft and gmod servers permanent so i got stupid and built a low powered server out of an old athlon media pc i had laying around. anyways my current setup i have going is my main router is in the basement and i have a dd-wrt d-link repeater in my room. ok so i gave the repeater a static ip of 192.168.1.56, and gave my server a static ip of 192.168.69.25 (i made the ip of the repeater 192.168.69.1) i forwarded all the necessary ports to the static ip of the repeater then to the static ip of the server. but my servers wont work. on minecraft it says "end of stream" but if i look at the active server log on the server it says "myipaddress has lost connection" and on gmod i just cant connect or see my server at all.

View 4 Replies View Related

Using Second Router As A Wired Repeater?

Feb 17, 2013

[URL] It works wirelessly, but I'm trying to get it to work physically. The end goal is to have my old PC as a server on the other side of the house, connected to nothing but the second router and a power cord. I know I could do this easily just by running an Ethernet cord across the house and skip using the second router altogether, but I'd really rather not.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved