D-link DSL-2750U - How To Control Ethernet Access To A Wireless Router

Apr 23, 2012

I have a situation where I have tenants connecting to my wireless network and paying towards the internet bill. I am able to control this by using MAC filtering, but I have just realised that this only works for wireless clients.

Is there a way to replicate this for the router's Lan ports? Or possibly even just disable Lan access. The router model is a D-link DSL-2750U.

View 2 Replies


ADVERTISEMENT

D-Link DSL-2750U - Connect Wireless Access Point To Modem

Jul 7, 2013

At my office we have a wireless modem(D-Link DSL-2750U) and all the clients are connect to it wirelessly with a wireless lan card. at the next floor we have two pc(without wireless lan card) that I want to connect them to this network, I have a switch and a wireless access point(TP-Link TL-WA701ND). my Question is that how can I connect the WAP to Modem? I set the operation mode of WAP to client and add the MAC address of it in the table of wireless modem but the clients cant connect to the network.

View 1 Replies View Related

D-Link DSL 2750U Wireless Router - Combine WLAN With LAN

Oct 28, 2012

I have D-link DSL 2750U wireless router. My PC and notebook are connected to router by Wi-Fi. They can share files or ping each other. I have a network storage unit plugged into router by an ethernet cable. Any of the computers cannot reach that storage unit or ping it. I guess my router isolates LAN network from WLAN network. Is there a way to combine them and get the router treat all devices connected to router in a single network?

View 1 Replies View Related

D-Link DIR-615 :: Web Access Control - Using Functions Behind Another Router

May 21, 2012

I would like to use the web access control that is on the DIR-615 along with my 2Wire modem/wireless router.  Is this possible?  If not is is possible to put the 2Wire modem into bridge mode and purchase a second wireless modem to run along side the DIR-615 that I have so that I can have two separate wireless networks that have two different web access controls in place?

View 1 Replies View Related

TP-Link 3G/3.75G Router :: Exception Keywords / Domains For Access Control?

May 7, 2013

Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :

I'd like to make exception keywords in the Access Control but I don't know how I could possibly do this. E.g. I have put in the keyword "apple" to be blocked, so if a domain has the keyword "apple" in it, it will be automatically blocked. What can I do, however, if I want to make an exception for the domain "appletree.com"? I haven't found any way to make an exception to specific domains or keywords.

View 2 Replies View Related

D-Link DIR-655 :: Website Filter / Access Control For Wireless Laptops

May 2, 2011

I have several laptops at home that connect via wireless connection tot he DIR_655.  Using the MAC address of those laptops, I want to prevent them from going to certain websites.Under 'Advanced" and "Website Filter", I addes several domain names (websudoku.com for example).  I selected "DENY computersaccess to ONLY these sites".  I then saved settings.I then went to "Access Control".  I clicked on "Enable Access Control".I clicked on "Add Policy" to cdreate a new policy for one of the laptops.When I boot the laptop and go to one of the websites, it still allows me access.  The URL/domain name is correct. 

View 5 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Access Control For One Pc

Apr 10, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :

Setting up access control for one PC. I just want to block all internet access to one PC during a certain time. It seems like my only options in the Access Control page in the GUI is to block websites or domains.

View 4 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - How To Manage Access Control

Jan 21, 2013

Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_120820
ISP : Cox cable

It doesn't matter how I set it up, once the policy is enabled nothing can get through. This is the same for "deny" or "allow" as default. Is there bug with this new firmware TL-WDR3600_V1_120820??

View 2 Replies View Related

D-Link 2750U Losing Connection Frequently?

Apr 22, 2013

I started using a D-link 2750U wireless modem-router about 2 months ago, and configured it using the given disk for my ISP (MTNL Delhi). Since then, it has never retained a connection for more than 10 days, give or take i.e starts showing a red earth light instead of a green one. I usually reset it to factory settings and reconfigure it using the same disc over and over again, but now it has started dropping connection more frequently.Recently, it developed a new disease. Connection is very unstable now. Through line, it keeps disconnecting every 4-5 minutes. re-connects and dies again itself and does not work through wi-fi at allMy hardware quality healthy as I ran a wired connection for over 3 years without any trouble before this one.

View 1 Replies View Related

Configuring D-link Wifi Dsl-2750u For Reliance Broadband?

Aug 6, 2012

configure my D-link wifi Modem DSL-2750U for Reliance Broadband.I dont understand codes but a simple explanation and step by step

View 3 Replies View Related

D-Link DIR-615 :: Access Control Blocks Too Much

Oct 24, 2012

I have tried to setup access control by setting up a policy that restricts certain MAC addresses during a period during the day from certain websites.  I set up the website filter and a schedule and selected them for the policy.  Instead of blocking just the websites on the filter list during the time setup in the schedule, it blocks all websites all the time.I made sure that I setup the policy to 'block some access' NOT 'block all access'.The only thing that seems to work is that only the computers with the MAC address selected are effected.

View 3 Replies View Related

D-Link DIR-655 :: Web Access Control Not Working?

Mar 2, 2010

I may be doing it incorrectly, but I'm trying to configure web access rules.  I first set up access control and tell it to use the website filter.  I've tried configuring it by both MAC address and IP address (separately, not simultaneously), but it still allows the listed sites in the web filter to get through.  Is there something else I need to block or am I not doing something correctly?  The network is on DHCP reservation, so IP addresses are always the same.  MAC addresses, as I mentioned, don't work, either and they are fixed and logged in the router.

View 9 Replies View Related

D-Link DIR-655 :: Access Control When IP Or MAC Can Be Changed

Dec 31, 2011

DIR655 with 1.33NA firmware.  I'm trying to determine how to block access to the internet for a specific LAN computer when the user knows how to change a MAC address.  I don't want to turn MAC control on and grant only to listed computers - the list doesn't accommodate enough MAC addresses, and the client has wireless and wired since it's a laptop.  I also don't want to set static IPs on all of the devices since some cannot accommodate that feature.I'm thinking that reserving an IP address isn't ultimately the solution either, since assigning the IP isn't going to work if the MAC changes. how to use access control under these circumstances?

View 1 Replies View Related

D-Link DIR-655 :: Only 1 Page For Domain Access Control?

May 23, 2011

I have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?

View 1 Replies View Related

D-Link DIR-655 :: Access Control Name Cannot Be Empty String

Feb 26, 2008

When attempting to configure access controls from the advanced menu I enable the access control checkbox. I then follow the configuration wizard completing each step as directed by the wizard. When I complete the wizard and try to save the rule I get the following error message regardless of how I complete the wizard. "Name can not be empty string". Yes, cannot is misspelled in the message. I have tried every combination of choices in the wizard and many combinations of naming the rule to no avail.

This did work properly on a previous firmware version, probably 1.04 or 1.05. I have not tried back loading to the previous versions to see where it did or did not work. I don't know how well the router goes back and don't really care to reload all the settings again by hand if the automatic recovery doesn't work.I want to use this feature to control what hours certain machines on the network have access to the internet.

View 15 Replies View Related

D-Link DIR-655 :: Access Control Policies IP Ranges?

Jan 9, 2010

I'm trying to block internet access to a range of IP addresses using the Access Control function of the DIR-655 router. Unfortunately, the router does not allow me to block a range of IPs. Instead, I can only create policies based upon individual IPs or MAC addresses. I have over 60 machines I want to block Internet access and I'd hate to have to type them in individually. How do I go about blocking all Internet access (HTTP/FTP/email/everything) for a range of IP addresses? They will have to be able to continue to use the internal LAN.

View 3 Replies View Related

D-Link DIR-655 :: Access Control - Block All Computers Instead Of Specified MAC Address

Aug 8, 2012

I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:

[code]...

View 4 Replies View Related

D-Link DIR-655 :: Error When Adding Policy To Access Control?

Nov 3, 2011

My firmware is 1.35NA and have a schedule established.  When I try to add a policy for access control, I can select a policy name but when I hit "next", I get an error stating "Internet Explorer has stopped working" and wants to close. I was able to add policies previously but can not any more.

View 3 Replies View Related

D-Link DIR-615 :: Schedules And Access Control Not Working Properly?

Jan 25, 2012

Trying to set up a simple schedule for keeping the kids from staying up all night.  I'd had this working on a Linksys WRT54G till it bit the dust.  I just want it to block internet after midnight. My problem is that the schedule is triggering the block unpredictably.?

View 3 Replies View Related

Protocols / Routing :: Can't Get Access To Router After Changing DSl Up-link To Ethernet

Jun 15, 2011

I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.

View 2 Replies View Related

D-Link DIR-655 :: Webaccess Filter / Access Control Doesn't Work With 1.35NA

Aug 28, 2011

For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA.  I've tried it with MAC and IP Address without any success.  I've also enabled/disabled/enabled DNS Relay, recreated the rules,  recreated the filters, etc.  Nothing.

View 14 Replies View Related

D-Link DIR-601 :: Website Filter / Access Control Causes Dropped Connection For Non-blocked Sites

May 4, 2011

I'm trying to set up a website filter on my DIR-601.  I created a policy for 2 MAC addresses, with a schedule from 10AM-6PM, selected "Block some websites", and disabled logging.  Under website filter, I added some entries, and selected "DENY computers access to ONLY these sites".  When the policy is enabled, and I try to access one of the blocked websites, it gets blocked correctly ("The URL access was denied by administrator.")  However, for all other websites, I get "server unexpectedly dropped the connection" errors, eg "Safari can�t open the page [URL] because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." or in Chrome "No data received.  Unable to load the webpage because the server sent no data."  This happens with ALL non-blocked websites.   I'm using hardware version A1, firmware version 1.01NA.

View 2 Replies View Related

Linksys Wireless Router :: E1200 - Parental Control Password And Block Internet Access

Oct 2, 2011

Why does my E1200 forget my Parental Control Password? This happens almost weekly and I have to use the "forgot password" option. It asks my security question, I answer it and set the new password to the same password it keeps forgetting. Why does this happen? Also, is there anyway to have total 24hr control on the Block Internet Access?

View 4 Replies View Related

Use Dlink DSL-2750U As Wireless Repeater?

Feb 15, 2013

I have a new internet router linksys EA2700 Firmware Version: 1.0.14, the wireless signal doesn't cover the whole house so I like to extend the wireless signal using my old router Dlink DSL-2750U as Access point, I configured the two router as following but yet didn't work.

Linksys
DHCP: enabled,
IP lease range 192.168.1.100 to 150
Wireless SSID, Security Mode, Passphrase, Channel Width and Channel number same as Dlink

Dlink:
DHCP: disabled
AP Mode: Access point
Bridge Restrict:Enabled
Remote Bridges MAC Address: is the linksys MAC.
And I removed the Layer2Interface and WAN old configuration.

View 3 Replies View Related

Parental Control For Tp Link Router?

Apr 24, 2012

I'm trying to set parental control for one of the kids in household, url...2gaming2Every Day 06:00 - 22:43 (meaning from 6am to 10:43pm he can acces ONLY those two sites, correct?)but, when I turn parental control on, all internet is off for him even allowed sites. Time right now is 21:44 gmt+2 and my router time is set right, so I don't know why it doest work?

View 14 Replies View Related

Home Network :: TP-Link Wireless Access Point / Ethernet Switcher (TL-SF2005D) Fails To Connect?

Jun 6, 2011

I have just bought a TP-Link Wireless Access Point (TL-WA&01ND) and an ethernet switcher (TL-SF2005D).I have put the access point into client mode, allowing me to put it in my room and wirelessly connect to my router, allowing me to plug my PC in over ethernet and use the internet. However, after much fiddling with settings I cannot get it to work, as it continually searches for a network, and then fails to connect, despite the fact it is configured to use the network?I already have a similar setup with a netgear wireless G access point which works, and so I dont understand why the new box cannot do this when using what I believe to be the same settings.

Secondly I have an ethernet switch box which I bought to connect to the access point and switch the ethernet signal between my two PCs, my xbox and PC. This works fine with my primary PC (over my old access point) but when I try to connect my PC i get a DNS failure with auto IP settings and a gateway failure with manual settings, and other devices refuse to connect.

View 9 Replies View Related

How To Control Internet Access On A Router To Particular Systems

Mar 2, 2012

in office we have a broadband internet to 6 systems one router .I want to control the partcular system internet

View 1 Replies View Related

Cisco WAN :: Access Control List On 7200 Router?

Dec 12, 2012

I am having some issues with creating an ACL for my gateway router.I want to block external access to my network 192.168.1.0/24 from internet so i set up the ACL on the WAN port of my 7200 router asI am using named extened access list -

{
deny ip any 192.168.1.0 0.0.0.255 log
permit ip any any
}
and i applied this inbound accesslist on the WAN port of router as
"ip access-group acl-in in"
 
Now i have blocked the external traffic to my network 192.168.1.0/24 but the issue i am having is i am also unable to reach outside now. All i want is to block external traffic on the router WAN port but allow internal traffic to outside. Did i miss anything in the access list?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: How To Control Bandwidth In WE941ND

Nov 17, 2012

Region : UnitedArabEmirates
Model : TL-WR941ND
Hardware Version : Not Clear
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : etisalat.ae

How to controller wireless bandwidth in WE941ND.

View 5 Replies View Related

TP-Link 3G/3.75G Router :: MR3220 - Rules Setup Under Bandwidth Control / Does This Setting Shared By IP Range

Apr 2, 2013

Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :

Looking at the manual for this router in regards to bandwidth restrictions.When you set up the Rules under Bandwidth Control does this setting shared by the IP range or does each IP in the range get that amount of bandwidth?

View 1 Replies View Related

D-link Dir-615 :: No Wifi And Cannot Access Admin Homepage Via Ethernet

Mar 19, 2011

I can however connect to internet ?

Tried Explorer & Firefox

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Priority On Bandwidth Control

Feb 7, 2013

Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version :

I have a TD-W8970. In settings "Bandwidth Manager" there is an option to put a value between 1 and 8, but does not specify which is better (1 or 8). What the value to give more priority to a computer to another?

View 1 Replies View Related

Cisco Wireless :: Can't Access Control Panel Of WAP4410n

Jan 8, 2011

just i purchase cisco access point and I tried to access control panel to setup wireless security but the page i issued not display 192.168.1.245, there is any wayes to connet device web base ??

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved