I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
View 3 RepliesI am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies View RelatedI recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies View RelatedI can't to put the security on my D-Link N150 some pepeol us my wifi some time.
View 1 Replies View RelatedI am considering the Subject router to add Wi-Fi to my home LAN, so I may take advantage of the wi-fi capability of my new Dell Laptop.I find the word "Cloud" disturbing. I thought the Cloud involved temporary storage on the internet.Will this router function to connect my 2 desktops and the laptop without a connection to the internet?
View 1 Replies View RelatedI can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 3 Replies View RelatedI havent been able to connect to the internet with my wireless Belkin N150 router in 2 days! I have tried everything. I have done everything on this website and it still will not get on the internet. My modem works fine.
View 3 Replies View RelatedI'm trying to set up my desktop using windows xp and a wireless belkin n150 f9k1001 router to connect to a wireless network that is being sent from a mac with some tp-link router so that I can connect to the internet the isp is bell aliant. I'm not entirely sure how to go about this or if it's possible I've tried the worthless tech support and setting it up as an access point but I don't really know what im doing.
View 1 Replies View RelatedI bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista
View 9 Replies View RelatedCan the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedI have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
I have not yet hooked up my router, N150. What I would like that after I hook the router up and then deside I don't want to use it. How do I disconnect it and go back to using my DSL modem and being connected to the internet?
View 3 Replies View RelatedHow do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.
Theh INTERNET PORT indicator on the router is goes to OFF mode.
Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..
Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
View 3 Replies View RelatedI recently had trouble with my Comcast Xfinity internet service and called to have them send a refresh signal. I was up and running again with my ethernet, but my wireless service using a Belkin N150 wireless router hasn't worked.From everything I had read I needed to do a hard reset of the Belkin N150 router and then reconfigure it's settings. Well I did the hard reset and power cycled everything, the modem, computer and router. I then plugged in everything again and connected the modem to the WAN on the router with one cable, and the computer to the LAN on the router with another cable. (I am using a Macbook Pro operating with Mac OSX). Now I cannot connect to the url...to configure the settings on the router at all!
I think the problem has something to do with my IP address. I opened the network settings and saw that my IP address is 50.138.25.x while my Subnet Mask is 255.255.254.0 and the router is being listed as 50.138.24.x. How to change this IP address to get my router connected or could it be another problem?
I've got a windows server 2003 machine which access internet over a Netgear N150 router also I've got an static IP, now internet is working properly even I can ping my machine from a remote machine.Here starts the real problem, I've shared few folders which I can't access from any remote machine not in my LAN.Although I could access my server through remote desktop and everything else is working fine, I've opened port 445 on router even that didn't worked also Windows firewall is OFF.Now when I try to browse my server through \myserverip it shows me a blank window but when I tried to access it like:
\myserveripsharedfolder it gives me error which reads something like
"File and printer sharing seems online but server is not responding on port 445."
My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies View RelatedI have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.
View 3 Replies View RelatedRegion : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL
I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream
Dell 8600 centrino intel pro wireless lan 2100 won't connect to netgear n150 wnr1000. Running 802.11b band it sees wireless network but won't connect. I have 2 other computers connected to network so it works.... I don't know if Netgear n150 is compatible with 802.11b band...
View 1 Replies View RelatedI cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies View RelatedI have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies View Relatedrecently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
View 2 Replies View RelatedI need to connect my wifi to my dvd player but it haveapasswork and it cannot connect, so i need to take off the passwork so that i can connect.
View 1 Replies View RelatedTrying to get a password for my n150 wireless
View 2 Replies View RelatedI have a D-link DIR-655 router which used to be able to connect to the internet fine through my modem. However, it wasn't connecting to the internet when I woke up this morning. I tried all the standard replacing the cables, powercycling the router, modem, and rebooting the PC. After trying all that, I used the reset button on the router and reconfigured manually by entering the IP into my browser and logging in that way, but still nothing. I can connect to the internet by plugging the modem directly into my PC, but connecting through the router or wirelessly doesn't work. I can connect to the network itself through the router, and wireless from my laptop, but it only has local access.
Here's the ipconfig going through the router:
Quote:
C:UsersSolon Family>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SolonFamily-PC
[Code].....
I bought a Dlink Dir-601, I was able to connect to the internet when we were with our last internet provider but after we switched companies it no longer connects to the internet. I've tried power cycling my system, updating the firmware, factory defaulting it, resetting it with the button on the back but no luck yet
View 4 Replies View RelatedMy new DIR-601 router has been installed and configured but will not connect to the internet either wireless or through a wired connection. Have reset and re-installed, have rebooted router, modem and computer all with no change. Connection is DSL (AT&T) and works fine when connected to either desktop or laptop computer at home. AT&T says to contact manufacturer, D-LINK says to contact ISP. After nearly two months without our wireless (XBOX and Netflix) we are about ready to return this before return period is up and just go with Clear.
View 1 Replies View RelatedI bought this new router, I've followed the CD and install everthing. My computer can connect to the router, but it doesn't connect to the internet.
View 1 Replies View RelatedI recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
I just bought DIR-655 yesterday and tried to set it up through the CD but without success. My problem at first was I couldn't get internet connect via router (but PC to DSL modem direct connection is always all right). Then I played around to turn on "Advanced DNS service" then I got internet connection via router to my PC. However sometimes the web site names couldn't be translated by DNS correctly and it resulted in "Not Found" and I am pretty sure those web sites are active and running (as I have no problem to access those if I connect DSL modem to my PC directly). Also I noticed wireless connection was very slow and some You Tube videos would stop playing after around 30 seconds and DSL modem had no further activity at all. Why couldn't I use 192.168.0.1 (default IP) as primary DNS (as I got no internet at all if I did so)? Is it really necessary to turn on "Advanced DNS service"? How can I get internet access if I turn "Advanced DNS service" off?
View 4 Replies View RelatedRegion : Sweden
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I'm trying to replace my old router with the TL-MR3420 but I cannot reach Internet.
I get "Internet" directly by a Cable into my apartment. This Cable is connected to the WAN input. Then I connect my computer to one of the LAN ports. (The Cable Connections are done exactly as on my previous router.)
The setup on my PC (running Windows 8) is as described in the manual (IP address automatic and DNS server automatic).
Internet doesn't work and I cannot reach the router from the browser using 192.168.1.1.
I'm not using any 3G and of course I have restarted the router (and PC) a couple of times. I thought I could just replace my old router with the new one... but NOT.