DLink WL-2100 - PC To Access Point To Wireless Modem

Apr 2, 2011

I have a D Link WL-2100 AP, I connected my PC to AP with ethernet cable, then I tried to connect the AP to my wireless modem but I couldn't do.How can I make the AP recognize wireless modem?

View 2 Replies


ADVERTISEMENT

Cisco :: Light Weight Access Point 1242AG K9 Is Not Joining 2100

Sep 4, 2012

I have configued Cisco LAP 1242AG with statis IP.I have connected LAP to WLC.I am able to ping WLC management interface IP Address from LAP's console.LAP is failed to Join WLC with  error "Could not resolve CISCO-SAPWAP-CONTROLLER"

View 3 Replies View Related

Windows Vista PC Will Not Detect Dlink Wireless Access Point

Nov 24, 2011

I have a dell inspiron laptop with windows vista installed. I have been traveling all over Germany and automatically detecting internet wherever I go however I cannot detect the dlink wireless access point directly across from me. My work computer is detecting and connecting just fine. I see other wireless networks just not the one I have a password for so I cannot connect. I have reset and seperately restarted the wireless access point but no luck. I am in desperate need of this wireless access. There is no line I can plug into manually either. I have also tried to manually set up the network and that either did not work or I did not go about it correctly.

View 4 Replies View Related

DLink DWL 2100 CD Missing?

Jan 2, 2012

How do i setup my d link dwl 2100 ap at my new address. I have moved and my installation cd has gone missing. The install wizard wants to work off the cd

View 2 Replies View Related

Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?

Nov 1, 2012

How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.

View 1 Replies View Related

Setting Up New DLink Access Point

Jan 3, 2013

I'd like to set up my new d-link access point

View 1 Replies View Related

Linking TPLink As Access Point To DLink Router?

Dec 12, 2011

I want to link a tp link router as access point to a d-link router.

View 2 Replies View Related

DLINK DWL3200 - Adding An Access Point Within A Network

Oct 24, 2012

I am attempting to install a D-LINK DWL3200 into my office network. I can't for the life of me get into the router though to change the password and name!I've read through various forums about running ipconfig and that giving me the gateway - However, we main router where the internet runs through so the IP address of the gateway is the main router! The default IP address listed on several forums is 192.168.0.50, but as everything in this network has an IP .50 is a printer!

View 2 Replies View Related

DLink Modem - How To Restrict Internet Access In Wired LAN

Feb 23, 2013

I have 2 mbps line with D-link modem shared by 2 persons through wire. Sometime I feel that my client is using more band width than me so I want to know is there is any way I can control the speed of my client.

View 1 Replies View Related

D-Link DSL-2750U - Connect Wireless Access Point To Modem

Jul 7, 2013

At my office we have a wireless modem(D-Link DSL-2750U) and all the clients are connect to it wirelessly with a wireless lan card. at the next floor we have two pc(without wireless lan card) that I want to connect them to this network, I have a switch and a wireless access point(TP-Link TL-WA701ND). my Question is that how can I connect the WAP to Modem? I set the operation mode of WAP to client and add the MAC address of it in the table of wireless modem but the clients cant connect to the network.

View 1 Replies View Related

Setup 3600HGV As Modem Only / Have Netgear DGN3500 As Wireless Access Point

Apr 19, 2011

I'm trying to find out if it's possible to setup a 3600HGV (VDSL Gateway) as modem only and have a Netgear DGN3500 (ADSL2+) as a wireless access point. I'm aware that both are DSL modems, my reasoning for wanting to have them both hooked up is that

a) the 3600HGV has no Gigabit switch and runs on wireless G

b) the DGN 3500 has a Gigabit switch and does wireless N. So in a nutshell I want the 3600 as simple modem and the 3500 as a wireless N access point with Gigabit switch.

View 4 Replies View Related

Cisco 2100 - Data Not Sending Or Receiving From Modem?

Oct 26, 2012

I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)

View 14 Replies View Related

Turning Modem Into Access Point

Jan 1, 2013

My modem and rotuer have double NAT. I am not the only one in my house so I can't mess with the router a lot, but turning the NAT off in my modem and assigning the new IP to my static IP router, by turning off DHCP in the router. Will make my modem a access point.

View 5 Replies View Related

Cisco WAN :: Connecting 2100 Cable Modem 3550 And E2000

Jan 15, 2012

I current have a Cisco 2100 Cable modem (192.168.100.1) connected to a Cisco Linksys E2000 (192.168.0.1) that is connected to a Cisco 3550 (192.168.0.10). I would like to relocate the E2000 to another room.  This would require me to connect the 2100 and the E2000 through the 3550. I have had to set a MAC address clone on the E2000 of the PC that is also connected to the 3550.
 
The question I have is how do I get this all to interconnect so that the E2000 is used by the 2100 for validation to the internet provider (Time/Warner).  I am also using the E2000 for DHCP.
 
Here is a copy of the running config:
 
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime

[Code].....

View 1 Replies View Related

Cisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?

Apr 16, 2013

I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?

View 6 Replies View Related

Cisco LAN :: 2100 - Browser Access To Wireless Controller?

Jul 29, 2012

I have a wireless controller 2100. I can't access it via browser, when I am connected to one of its physical ports. I use the same subnet ip address as that of the management interface of the wlc.

View 5 Replies View Related

Modem Router Access Point Setup?

May 15, 2012

I bought the DIR 655 to put into our network as the Netopia wireless fails to connect even though we have maximum signal strength. Att advised that buying a third party router would solve this problem.I did manage to almost configure the DIR 655. I would have to connect it to the system to test it[CODE]

View 5 Replies View Related

Using Linksys E1000 Modem Router As An Access Point?

Aug 17, 2011

I have a linksys e1000 modem router as the wireless internet connection in my home, now I bought a new one linksys e1000 to use it as an access point to cover the uncovered area, How can I do that?

View 1 Replies View Related

Cisco Wireless :: Point To Point Access Point 1262 Bridging

Feb 27, 2013

How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.

View 12 Replies View Related

Edimax EW-7416APn V2 / Connecting Broadband Modem To Access Point?

Aug 25, 2012

I have internet over LAN with Motorola SB5102 broadband modem. Is it possible to share this internet on Edimax EW-7416APn V2 access point?

View 1 Replies View Related

Dlink Dsl-520b Dls Modem And Wireless Router On Different Networks?

May 12, 2012

my dlink dsl-520b dls modem is using 192.168.1.1 and is plugged into the WAN port on my dlink wireless router.the wireless router is 192.168.0.1. (these are both in the main building which is remote from my shop).Then i have a netgear wireless access point This spreads the signal properly, and I can get connectivity on all my computers -although i do have to specify a default route on the computers on my shop side of the access point.I noticed that the internet light on my modem is red which indicates no internet connection. I am still able to access the internet fine, but i would like to be able to log into the modem from my network. I was able to do this before by setting a computer with a netmask of 255.255.0.0.

View 6 Replies View Related

Change The Password On A DLink Wireless Modem Dwl2100ap?

Jun 22, 2012

change the password on a d-link wireless modem dwl2100ap

View 1 Replies View Related

DLink D604T Wireless Modem Connection Keeps Dropping Out?

Apr 12, 2012

I have a DLink D604T wireless modem. It has been working fine for the past 5 years but today the connection to my netbook computer kept dropping out.I can fix it temporarily by going into Network Connections, right clicking the modem, selecting wireless networks, clicking the modem, going to properties and retyping the network password. I then have to set the firewal to advanced connection settings and typing in my family network password, and changing the Windows firewall settings from On to Off.However, the connection drops out again after just a few minutes. If I then turn the firewall back on, it comes back on again for 5 minutes, but then drops out again. Then I have to repeat the whole process.

View 1 Replies View Related

Cisco Wireless :: Upgrading 1042 Access Point To Lightweight Access Point

Apr 20, 2012

I had a new AIR-AP1042N-N-K9 access point and I tried to convert it into lightweight mode with the image c1140-rcvk9w8-tar.124-21a.JA2.tar . I used all the methods but the AP is getting hanged at one position after decompressing the new IOS. The capture of the process is below: [code] After this I am getting the junk characters and everytime AP hangs at this position.

View 4 Replies View Related

Connection Between Access Point / Router / Or Cable Modem And The Internet Is Broken?

Aug 26, 2012

The detected problem is the connection between my access point, router, or cable modem and the Internet is broken.The network gateway is accessible, but Windows couldn't receive network traffic from the Internet.All other devices (iPad, Xbox, android phone) have no problem connecting to the Internet.Desktop is the only one experiencing the connection issue.

View 1 Replies View Related

Connection Between Access Point / Router Or Cable Modem - Internet Broken

Jan 31, 2012

My laptop died last week and have been using my husbands, which I hate! We had some issues with computer freezing on some webpages or after being on webpages for awhile (like facebook). Yesterday it froze and I could not get it back on. When he got home he did scan disk (which I also did) and got it working after going into safe mode and doing system restore. He said an update had gotten through and messed things up. Anyhow, after he was on it a few hours last night, we lost connection. I figured the crazy weather was the culprit but it has been off all day. Our router is working and connecting but the adapter is not. Also our home phone says there is no line. We have unplugged everything several times, checked to make sure everything is in the right spots, I have even reset the router and rebooted the adapter. I uninstalled and restalled the adapter also. It is now telling me that "the connection between your access point, router, or cable modem and the Internet is broken". The only lights I have on the adapter are power, battery, DS and now the US light is blinking. The online and link lights are not on.

View 3 Replies View Related

Wireless :: Can't Add Two DLink Routers To Westell 7500 Modem / Router?

Jun 18, 2011

We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?

View 16 Replies View Related

Home Network :: Wireless DLink Modem 2730U / Share ADSL Internet As Limited?

Aug 4, 2012

I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?

View 4 Replies View Related

DLink DSL 2640R Wireless Adsl Router / Modem - Create More Network Ports Upstairs

Jan 22, 2013

At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.

View 1 Replies View Related

Linksys Cable / DSL :: Atlanta 2100 - When Installing Driver To Use Usb Cable Modem Does Not Recognize It

Dec 13, 2012

I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.

View 3 Replies View Related

Cisco :: Unable To Access GUI For 2100 Series WLC?

Sep 2, 2012

I have powered ON WLC(2100 Series) and connected LAN port from WLC to my PC. To access WLC GUI what is the factory default IP address?
 
I connected Console Port of WLC to Serial port of my PC. I have configured WLC as per the WLC quick guide.

Management Interface IP address :: 10.40.0.4
Management interface Net Mask: 255.255.255.0

[Code].....
 
The result is same even when below commands are used Configuration modeport adminmode all enablenetwork webmode enablenetwork secureweb enable 

View 12 Replies View Related

Cisco :: 2100 WLC - Guest Access / Passing AD Credentials

Aug 31, 2011

We have a building with 6 Cisco Airnet 1140 connected to a Cisco 2100 WLC, all tied into a nice Central Certificate server and a Win2008 NPS/Radius server on a Win2008 AD. Our trusted PC wireless access is fine, with domain laptops with certificates authenticating with DHCP all round the building. We use GP to apply settings to an AD integrated Proxy server for internet access.
 
The problem I now have is with guest access...
 
We are an education establishment, so students could turn up with anything from a laptop to an iPad to an Android phone, which immediately rules out using proxy PAC files to configure the proxy.
 
What I really want is a method of using the radius to verify the guest user against their existing AD user account, which I believe is possible. The one snag we have is in order to avoid the user having to configure the Internet proxy we would have to switch it to a transparent mode, which immediately restricts our ability to report on AD username, we would only have an IP address to report on, which is next to useless!
 
We've looked at a Gateway product (Astaro), which integrates the Filtering onto the Gateway, but the downside is that you have to use their APs, so we would be replicating existing work, whilst also managing two filters.

View 1 Replies View Related

Linksys Access Point :: WRT54G - Unable To Find Access Point In Home Network

Aug 29, 2009

I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1.  My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
 
I found directions in the forum for a setup using the LG BD390  but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold  from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
 
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi. 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved