My wireless internet has been working perfectly well on my XPS 17 (L701X) until last weeky. I was on the internet and then my wireless turned off suddenly. the error message says "turn wireless capability on". BUt on the wardware, the witch is on, but when I check windown mobility center, it shows "wireless off" . Ran network diagnostics, but same error massage "turn wireless capability on". For now, when it happens, I need to restart my computer and it back to nomal. This happens at least 3-4 times a day.
I have a Studio XPS 1340. Running Vista. Sat evening I was on the net, and had left the machine for a while. I refreshed a page using F5 after 10 mins inactivity, and the WIFI had dropped. I have the Dell Wireless 1515 Wireless N adaptor. I cannot find any wireless networks, and the error message I get is to "Turn on wireless capability".
On the Studio XPS 13 there is no wireless switch, to turn on/off the wireless. I've tried to turn on the wireless using Fn + F2, and I have also unchecked the "allow computer to turn off this device to save power." box. rebooted any further suggestions? I've disabled and enabled the wireless network card a couple of times, drivers seem to be working correctly. when I try to update the drivers I'm told they are the most up to date drivers available.
Might this be McAfee related? Have I inadvertently turned off the wireless using a shortcut key by accident?
I have a dell inspiron 1545 and recently the OS crashed. It was terrible I couldn't do anything not even boot up in safe mode. So my friend said they could fix it. They installed Vista Ultimate and managed to save all my files from my previous system but I can't turn on the wireless capability. When I hit the F2 key nothing happens.
I have a MSI laptop and I turned on Wireless from the button and the led is now green but when I try to connect it says it is off? Btw, there is a X on the Wireless Connection in Control Panel > Network and Internet > Network Connections.
I am having to use my ethernet for my lap top, Satellite Toshiba. I have a router and the other laptop in the house works but mine wont. Cox blames it on Toshiba and Netgear and netgear blames it on Toshiba. i blame it on Cox who says for some reason my Toshiba wont allow the signal to be picked up. It goes elsewhere but not my laptop. PS is my satellite burner capable or do I have to buy softwARE?
I have a Linksys WRT120N wireless router. I am currently only using wired connections to the router. I recently bought a Nexus 7 tablet computer and would like to connect to the Internet wirelessly. How do I turn on the wirelss capability of my router securely?
I have Dell Inspiron 15 3520 laptop bought in December 2012 with Windows 8 Pro. It was working fine until two days ago. I am unable to obtain DHCP lease either through wireless or wired network. After troubleshooting, I found DHCP service is not running and try to restart but of no avail.I ran sfc /scannow and the results are OK.
My Inspiron 1750 runs Window 7 with Dell wireless 1397 WLAN mini card installed. It suddenly now cannot get internet nor network connection. The troubleshooting says WIRELESS CAPABILITY TURNED OFF. How can I turn it on and keep it always on?
My dell inspiron 1420 wifi and bluetooth stopped working. I can't pick up and wirless signals and i get a message saying wireless capability is turned off. I have tried reinstalling the driver, disabling the wireless and re enabling it. I done just about everything but nothing seems to work.
OS: Windows 7 Home Premium -- Service Pack 1, 64-bit Browser: IE 9 Computer: Dell Studio 1745
I am receiving an error message window titled "Wireless Configuration" with the following message:
"OLE initialization failed. Make sure that the OLE libraries are the correct version."
I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.
I have an elderly Dell Dimension 5150 desktop computer. It should have wireless capability. I purchased a wifi usb 2.0 adapter, but have been unable to set it up following on-screen instructions.Running Win XP Home edition.I have reason to believe that OS may have been comprimised by a virus previously; that is why I set it aside. Now I am attempting to reactivate it.The OS seems to work normally, but I need internet access to confirm this.
I have a functioning wifi router in my house; it works normally with two other computers.I am attempting to confirm if the Win XP OS needs to be replaced before purchase.How can I confirm the OS is shot and I must purchase a new one?
My desktop is telling me I need to install wireless internet hardware. Is that something I buy and install? I am trying to connect to the internet through time warner cable wireless.
I purchased a WRT110 wireless router several weeks ago. Used it with my WPC55AG with no problems at all. I liked the wireless-N, so I decided to upgrade to a wireless-N notebook card and purchased a WPC100. I can always connect to the router with 100% signal strength. However, when trying to access the Internet, sometimes I can connect to websites, but I regularly get an error message that Internet Explorer cannot connect to the internet, even though the signal strength is still 100%.
Tried going back to my WPC55AG and do not get any connection error messages. Tried connecting to my router with my PSP and do not get any connection error messages. Connected to another wireless router that didn't have WPA or WEP using my WPC100 and didn't get any connection error messages..
computer was working fine a few days ago, all of the sudden not able to get online anymore at all,recieve error message 651 with dsl connection, and when trying to connect to wireless get an error message saying invalid ip adress configuration,
ipconfig/all reveals: C:Usersygydfre>ipconfig/all Windows IP Configuration Host Name . . . . . . . . . . . . : bygydfre-PC[code]......
I am trying to set up a E2500 router to a Arris/Comcast modem. I connected the blue cable to the router then to the modem and followed the Cisco instructions on the disk. I was 90% done when I received a error message 82BD0118 - Description - adapter connection time out period expired with no IP address.
I have a Dell laptop Inspiron 1545 model PPHL that will not connect to my wireless route. I know the wireless router is working because I call connect to the internet using my Gateway laptop. I'm getting a message that the (Dell) wireless capability switch is turned off. I've been unsuccessfull in my atttempts to turn it on. how to turn the switch on?
I have an HP C5280 printer running wirelessly via a TP Link wireless print server and D Link Di 624 wireless router. I can print successfully from either my desktop (which is connected direct to the D Link router) or either of my laptops (wireless). However, when I select the double-sided print option I get a print error message after re-inserting the odd number pages to print the other side of the paper and then click 'continue'.Could I resolve this by connecting the printer both direct to the desktop using USB AND leaving it connected via the wireless TP Link print server? This would enable me to print double-sided from my desktop (as I did before when the printer was only connected via the USB desktop port).
My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.
I recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
My WRT54G router is already feeding 2 wireless PC's with no problem. Haven't been as successful getting my new Samsung Series 7 TV wireless connection working. The TV screen prompts for a 'security key', but once entered, tells me the connection is unsuccessful. The TV does not provide any specific error message - just tells me to re-enter the security key and/or re-start the router (which I have done many times with no success). I am entering the 'Encryption key' from the WRT54G router when prompted by the Samsung TV for the 'security key'.
Upon checking the logs, I'm seeing a lot of these messages:
*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP 00:3a:98:09:4e:d0
Always the same MAC address, which I assume is a Cisco AP trying to join. The output interpreter/message decoder isn't much useful. 5508 Controller running ver 7.3.101.0.
