Error 56 - The Cisco Systems Inc VPN Service Has Not Been Started

Feb 20, 2013

I have an issue where I am trying to start my VPN and continually get the following message: Error 56: The Cisco Systems, Inc. VPN Service has not been started. Please start this service and try again.

So I have been into Services to 'start' Cisco Systems, Inc. VPN Services - this then always comes up with this error: Error 1053: The service did not respond to the start or control request in a timely fashion

The solution mentioned on other posts on disabling the ICS but it was already disabled. When I try to start VPNGUI I also get error 56 and when I try to use services.msc to start the service I get error 1053. Then also when I try to start from task manager services(cvpnnd) i get access denied.

View 1 Replies


Server Service Not Started In Windows Xp?

Jan 17, 2011

when i trying to share on window xp based computer and access to another computer it givs the message " The Server service not started

View 9 Replies View Related

Cisco AAA/Identity/Nac :: ACS Found CSLog Service Not Started

Mar 13, 2011

I used ACS on windows 2008 SP1, found CSLog service not started. I try to restarted but service was started for while and went to stopped.How should i do to start this service?

View 2 Replies View Related

Intel 82578DC EC - Could Not Be Started Error Code 10

Jan 16, 2011

I have a Intel DH55HC motherboard running windows 7 and the Intel 82578DC Ethernet controller is coming up with This device cannot start (code 10)I have loaded the prowin32 driver download from the Intel site and also re-done the BIOS as instructed and it still wont resolve.

View 1 Replies View Related

Routers / Switches :: Connect Two Systems Together But Was Giving Error That Contact Network Administrator

Jan 30, 2012

Trying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson

View 1 Replies View Related

Cisco :: CPI 1.2 Prime Infrastructure Error While Service Start

Mar 8, 2013

I have done new configuration for CPI 1.2. while i tried to start service i got belw error. [code]

View 3 Replies View Related

Cisco Wireless :: 2811 Service Module Is Trying To Recover From Error

Mar 27, 2012

I am currently installing a NM-AIR -WLC 6  wireless module in a 2811 and its giving me the follwing errors below and status.I have checked the trouble shooting pdf and says might be possible hardware error. [code]

View 4 Replies View Related

Dependency Service Or Group Failed To Start - Error 5

Jul 20, 2011

DHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.

View 1 Replies View Related

DHCP Server Service - Error 1075 - Not Starting

Oct 8, 2011

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work. Points to note: 1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Service-Type Not Present Error When Attempting To Authenticate WLC 5508

Sep 13, 2011

I an currently running Cisco (ACS and attempting to get my Cisco 5508 WLC's ( loaded into ACS for TACACS+ authentication for managment users.
However I keep getting the following error:
*emWeb: Sep 14 14:44:45.931: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed for the user:test_tac. Service-Type is not present or it doesn't allow READ/WRITE permission.
Now I've attempted the step-by-step using the following URL but to no avail.( there are some slight differences in ACS 5.2)
Latest WLC configuration guide I could find (Software Release 7.0 June 2010) isn't much useful either.

View 6 Replies View Related

Error 1053 - Service Did Not Respond To Start Or Control Request In Timely Manner

Apr 11, 2012

Day before yesterday my Laptop [Dell Studio] has suddenly stopped working and i have to shut it down forcefully. Then i logged in again but my wireless was not working, i have googled the solutions and tried to start the WLAN Autocofig service but its throwing an error : 1053 : The service did not respond to the start or control request in a timely manner.I have Windows 7 installed on my system.Suddenly the speed of my laptop reduced drastically. Now its taking almost 12 mins to start instead of 2 mins.I have also removed some lines from the test files from the registry as mentioned in the below website as a resolution, but its not working.Unable to connect to wireless networks on Windows 7 Enterprise laptop. I dont have OS [Operating system's] CD as it was pre-installed on my laptop when i bought it.

View 2 Replies View Related

Cisco Firewall :: ASA 5510 / Ip Service Object And Service Group

May 16, 2011

When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq


View 8 Replies View Related

Cisco Application :: ACE 20 Service-policy Out Of Service / Still Able To Connect To VIP

Feb 28, 2012

We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.

View 10 Replies View Related

Cisco :: Topology Service In LMS 4.0 / ANIServer Service May Be Down

Mar 25, 2013

I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP

DNS is working using host file in driversetc i restarted the server

restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..

View 6 Replies View Related

WAN Miniport (IP) - My Lan Systems Are Not Accessible?

Feb 22, 2011

i found WAN Miniport (IP) - in my windows xp and at the same time my Lan systems are not accessible.

View 1 Replies View Related

Network Management Systems

Apr 7, 2011

Deploying monitoring systems, typically in NOCs and maintaining them and creating modles of customer networks working with SNMP polling systems. Tools include applications like HP NNM, Netcool, Ciscoworks etc. How far would a career take you if specialising in this area? It seems like a diversion from the typical Routing/Switching side of networking. Not nessacarly from a technical perspective, how about networking? Ie; being exposed to migration/project teams who wanting to 'migrate' more hardware and sites to the care of the NOC, after the design teams have implemented them? This seems like a step towards the design side which in the long term I am wishing to get to.

View 1 Replies View Related

How To Monitor Bandwidth (40 - 50 Systems)

May 25, 2011

I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras.Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work.At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down.We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down.

View 4 Replies View Related

Connect 2 Systems On Lan With Different Workgroup

Jul 17, 2011

I have a few laptops at home and one desktop. I also have a work laptop which I carry to work every day. I have a lan at home. The computers are connected through a wireless router though my pc is connected through a lan cable. We are able to share files and content.

I sometimes connect my office laptop at home. Though the laptop connects to the network but I am unable to transfer or share files to other computers running Windows Vista/7. After a bit of research I figured this is because the workgroup name of my office laptop is different than the systems at home. I dont want to change the workgroup name of my office laptop as it will create problems at work.

How can I connected my office laptop to the network and transfer files if the workgroup name is different? It does show names of computers on network but when I try to connect a username & password box pops up.

View 6 Replies View Related

How To Get Isp Login Details Of Other Systems

Dec 15, 2011

How do I find out my ISP and ISP password?

View 1 Replies View Related

Broadband :: How To Share Evo Between Two Systems

Aug 8, 2012

How to share evo between two systems.

View 1 Replies View Related

Cisco VPN :: Does ASA 5540 Support VPN Access On MAC Systems

May 22, 2013

Does Cisco ASA 5540 Support VPN Access on MAC Systems ??? Is Anyconnect available for MAC ?I am also having trouble running Clientless VPN on MAC , not able to start smart tunnels?

View 1 Replies View Related

Best CAT Cable For Security Camera Systems?

Nov 26, 2011

what is the best cat cable to use in security camera systems

View 1 Replies View Related

Cisco :: What Operating Systems Windows Or Linux Can Install WCS-PLUS-UPG-100

Jul 1, 2012

I need to know in what operating systems Windows or Linux I can install the WCS WCS-PLUS-UPG-100. [code]

View 8 Replies View Related

Cisco :: LMS 3.2.1 RMEDBEngine Is Not Getting Started

Aug 8, 2012

I am facing this issue with my LMS setup. the rmedbengine is not getting started. The CW was down due to low memory space . After restart the RMEDBEngine is not coming up(Made some free space avaiable in the drive) . I have done transaction log recovery. Wher i  find the issue saying " database cannot be started - no error " for rme database. Attached the error SC.

View 1 Replies View Related

Cisco :: Getting Started With CNA 2750

Feb 6, 2012

I have a number of Catlyst 2750 switched as well as some wireless AIR-AP1131 access points that I would like to better manage. Some of the IOS are out of date, need to look at setting up VLAN's etc etc
I downloaded Cisco Network Assistant v 5.7(1) but when I do a network scan it just says every single device is Unsupported.I have a new 3750G-24PS sat here that I bought just before Christmas and I would like to configure it.

View 10 Replies View Related

Home Network :: When UDP Is More Preferable Over TCP In Distributed Systems

Feb 29, 2012

When UDP is more preferable over TCP in distributed systems? Why?

View 1 Replies View Related

Wireless :: Ip Address Of The Systems In Wifi Network

Mar 27, 2011

i wanna to know the ip address of the systems in my wifi network in win 7.

View 1 Replies View Related

Download Speed Varies On Two Systems At Same Time

Feb 19, 2012

I am using my normal Ethernet cable that I used on my old PC at the exact same location / circumstances, but when I plug the cable in my new PC, my download speed peaks at 81.5 kb/s and my upload speed peaks at 10 kb/s. Now when I put it back in my old pc I get 3mb/s download speed and 0.5 mb/s upload speed. I don't quite understand what the problem is. Do I need to update drivers/BIOS? I can't find any updates. This is a clean install of Windows 7 Ultimate 64 Bit with barely any programs installed as of yet. I have reinstalled Windows 7 aswell, to no avail.

View 14 Replies View Related

Peachtree App - Systems Not Showing Up In Workgroup Environment?

Nov 4, 2011

I have a peachtree application installed on a standalone system and needs three other systems to connect to the shared folder to work but each time I click on show workgroup computers, it shows me a blank page on one and only shows the other system on the other.Hence when i try to connect to the peachtree folder, it give error that the system is not accessible?

View 1 Replies View Related

Connecting Two Laptops Via Router With Different Operating Systems?

Jan 3, 2012

I'm adding a router to my existing Win XP Home laptop in order to communicate with a new Dell Inspiron Win 7 laptop and want to be able to access the internet from both. My Netgear Router is setup and working and both laptops recognize the net. How do I get the Win 7 unit to access the net and e-mail?

I use Windstream as my ISP but I use AOL for e-mail. Am I trying to do something that cannot be done?

View 1 Replies View Related

Campground Wifi Systems To Get Internet / Email

Sep 20, 2011

I use campground WIFI systems to get internet/email but some wifi systems have limited range.I solved this problem with a booster antenna but that means I am hard wired to it. I want to (if possible) to get the wifi signal to a bridge then send it to a router so that I can use my lap top, printer and other devices in my 5th wheel wirelessly. I looked at a suggested system that uses a point-to-point antenna that feeds a bridge, that feeds a router. I don't want to use the point-to-point antenna.My booster antenna is a USB feed.

View 1 Replies View Related

How To Control Internet Access On A Router To Particular Systems

Mar 2, 2012

in office we have a broadband internet to 6 systems one router .I want to control the partcular system internet

View 1 Replies View Related

D-Link DIR-615 :: Can't Connect Game Systems To Internet

Apr 17, 2012

Today I got a new modem, which gave me internet on the computer. I still can't get online on my PS3 or IPOD. How to create a new wireless connection.  Also the World icon on the router is red but everything else is green.

View 5 Replies View Related

Copyrights 2005-15, All rights reserved