Frequent Disconnects With Actiontec V1000H Gateway?

May 6, 2011

I've recently bought an Actiontec V1000H gateway from Telus because my previous gateway burnt out. It seemed to work fine at first, but then I started getting disconnected at random. The only way I have found to fix this issue temporarily is to ipconfig /release and /renew.

View 5 Replies


ADVERTISEMENT

Actiontec V1000H No Request Found?

Sep 19, 2012

I tried to forward a new port on my Actiontec V1000H router. I was able to sign in without incident, but the moment I tried to begin navigating within pages, I would be greeted with a red screen reading '400 Bad Request - No request found' roughly 60% of the time. Usually refreshing the page a number of times would allow me to proceed, but because the Telus software for the V1000H cycles through so many pages when applying a new forwarded port to the firewall, it's almost statistically impossible to make it through.I have no issues with internet connectivity, and having this port forwarded isn't critical, but this problem is a real nuisance as it turns changing any router settings into a long, tedious, and sometimes downright impossible chore.

View 5 Replies View Related

Frequent Lags And Disconnects With DSL?

Jan 17, 2013

At our house we have Fast Access DSL through ATT. We are getting very frequent disconnects and lags. We have multiple devices running off of a single DSL modem/router. It has wireless and wired connections available. Our wireless devices disconnect as frequent as our wired devices do. We have called ATT many times. They have had us replace the DSL filters and did a line test outside our house which came back clear. However, when they run a line test while I am on the phone with them, they say they detect multiple errors on the line. We have replaced our DSL modem with a new one as well. It is a NETGEAR VersaLink Four Port Ethernet Wireless Gateway, Software VER:06.04.12. The self-diagnostics on the Modem come back clean with no problems detected. We get static on our phone line frequently as well.

[URL]

In the technician readout part of my modem I also see this:

1Manufacturer NETGEAR
2Vendor ID b5004946544e449c
3Model NumberB90-755025-15

[Code]......

View 2 Replies View Related

Frequent Disconnects On Cable / Router

Mar 2, 2012

The internet connects fine, but every couple of minutes it will disconnect for a couple of seconds. It's not a big deal when browsing, but it's disastrous when downloading big files or playing online games.What I've tried so far:

-Resetting the modem. No change.
-Reconnecting the modem/router completely. No change.
-Replacing the main splitter. Slight change, but problem came back eventually.
--Original problem came with the tech's 2 way 5-1002 mhz spliiter.
--I tried replacing it with a 3 way 5-1000 one. The modem on 7db and cable on 7db. It worked fine for a couple of days.
--Problem comes back today. Moving the modem to any of the 3 outputs doesn't fix anything. Moving it to 3.5db actually causes a short timeout every minute when I try to ping yahoo (as a test).
--I've also tried a 2 way 5-900 mhz splitter. It was the worse one of all.

Other info:The internet went down to the entire block at the start of the year. No one knew this of back then so we made a call to comcast, and they scheduled for a tech. A couple days later, we decide to get a new modem from the comcast center just to make sure it wasn't our modem. Some problems with activation prevents us from knowing if it was. We get back online somehow the next day, which is also the same time the tech came. He decides our numbers are weird and adds in a splitter for the internet and tv (which leads into another splitter for each room), and an amplifier for the tv. In the middle of this, another tech stops by and tells us the entire block was down and he said he fixed it now, he doesn't stay long. The first tech finishes installing everything and leaves. All is fine for a couple of days, until a week later and we start experiencing frequent disconnects. We've tried calling comcast again, but they say the connection is fine on their end and the problem is with our router. When I ping the router and the modem directly, there are no dropped connections. It's only when I try to ping anything on the internet when the problem pops up.

View 13 Replies View Related

Cox Cable High Speed Internet / Frequent Disconnects?

Mar 27, 2012

The modem checked out and was all good, the splitters are brand new and the line is apparently fine.This left the router as the issue. We had a Netgear router and attempted to replace it with a Linksys router.The firmware on both routers have been tested both old and new firmware.This happens to all computers/laptops connect to the network I do not receive a message stating that I was disconnected from the network, the internet simple cuts out for a little while and then comes back in.Cox says that they are 100% certain it is not on their end, nor is it the modem.The disconnects occur at random (there is no specific intervals). They last anywhere from 30 seconds to 10 minutes.

View 8 Replies View Related

Netgear WG111v2 Frequent Disconnects From Wireless Internet

Jun 12, 2012

I am using a desktop with a Netgear WG111v2 dongle to connect to my cisco linksys router.Basically my old modem died which was connected to a wireless router so we replaced it with a cisco linksys router and ever since the change ive been having difficulties connecting to internet on my desktop where as the the rest of the laptops in the house have had no problem. In the begining the desktop would always say its had limited connection the the network and such i couldnt connect to the internet but disconnecting the router several times and restarting the computer several times eventually the computer would have full internet access through the network without disconnecting at all.

A few days later the computer starting connecting to the network and gaining full internet access usually without turning of the computer and restarting it although i would disconnect from the internet every now and again for a minute or so and reconnect automatically this would happen more frequently when using Skype or msn messenger extremely frequent when using skype and especially when in a call.ive updated the driver of the wireless dongle to the latest version.my desktop is running vista while the laptops are running windows 7 and mac osx or whatever.ive also download a free version of avast and given a full scan of my computer without finding any threats.

View 4 Replies View Related

Cisco Wireless :: 1131AP Frequent Disconnects For 802.11b Clients

Apr 18, 2011

We recently converted autonomous 1131APs to LWAP. We have some 802.11b clients that were associated to these APs and they worked fine. Ever since we converted them to LWAP, the clients frequently disassociate and it causes alarms on these wireless clients which are used as monitors.
 
WCS shows the client disassociation and re-association and it says the roam reason as "unspecified".  It associates to the same AP and keeps the same DHCP client address etc. I tried setting a static IP on the client but that did not work. We verified the PSK settings and they all match between the clients and the controller. [code]

View 5 Replies View Related

Cisco Wireless :: AIR-LAP1262N-A-K9 802.11b And B/g Clients Frequent Disconnects?

Mar 11, 2012

I have a new deployment with a Cisco 5508-50 controller running 7.0.220.0 code and 35 AIR-LAP1262N-A-K9 access points. Current legacy clients have trouble connecting and after connecting they may or may not drop off and have trouble connecting again.

View 16 Replies View Related

Linksys Wireless Router :: Frequent PPPOE Disconnects On E2500?

Dec 13, 2012

I have a Cisco/Linksys E2500 router that I have had for over a year and it has worked without issues for over a year.  However my wireless ISP just switched my CPE from A Mikrotik wireless radio to a Ubiquiti wireless radio.  As soon as they did this my PPPOE sessions from the E2500 (acting as my PPPOE client) start disconnecting and reconnecting every few minutes causing major problems with my internet and voip connectivity when it looses connectivity every few minutes.
 
The strange things is if I connect my much older WRT54G router as a PPPOE client (with the same exact PPPOE configuration), it works just fine and I don't have any PPPOE disconnects. 
 
I upgraded to the latest firmware on my E2500 and nothing changed, it still disconnects my PPPOE sessions probably close to 50 or 100 times an hour. 
 
I'm thinking it's some sort of compatibility issue between the Ubiquiti Nanobridge Radio CPE and the E2500 router acting as my PPPOE client.  Also another thought was that perhaps my ethernet port wasn't negotiating speed/duplex correctly on the E2500. 
 
Is there any way to hard code the speed/duplex on an E2500?  I can't seem to find any spot with that setting.

View 8 Replies View Related

D-Link DIR-655 :: Frequent Disconnects Difficulty Even Connecting To Routers Home Page

Aug 13, 2011

I am having a similar problem to a couple others with the dir-651.Frequent Disconnects difficulty even connecting to routers home page.Internet worked ok on dir-615 i had before, just slow gaming speeds occasionally running vista 64 Timewarner cable.And i do have the newest firmware.

View 3 Replies View Related

Dell :: Inspiron 1545 / 1397 WLAN Card - Slow Internet / Frequent Disconnects?

Dec 4, 2012

Older model Inspiron 1545' using the 1397 WLAN card. Has been working fine, until perhaps the past two weeks. Now it frequently drops out, requiring manual disconnect and reconnect. Tonight Internet very slow on that laptop.

There are other devices using the same wifi (including this iPad used to post this), which connect to the wifi and Internet no issue. To me, its pointing to the laptop - either the WLAN card itself, or something in the laptop starting to fail (the laptop does have issues restarting - where it won't do that unless left for say 30 mins).

I'm suspecting a recent windows update or mcafee security update - no other software has been installed or updated.

I've tried changing antenna setting from auto to aux with no change to the above. Have checked for newer drivers - the laptop reports the version we have is the latest ( from 2009) - although they are the windows driver. Running windows 7, 64 bit - as supplied by dell when laptop was brand new. should I give up on the 1397 card and use another USB wifi adapter ?

View 3 Replies View Related

Cisco Routers :: WRV210 - Quickvpn Disconnects - Remote Gateway Not Responding

Oct 2, 2012

We have 2 remote locations that are connecting to a server at our home location.  Each remote computer uses quickvpn utility to establish a vpn with the home location.  Our problem is that sometimes the vpn disconnects while we are working in remote desktop on server 2008.  Luckily our sessions in remote desktop stay put but we lose the vpn connection.  Most of the time we get a message that the remote gateway is not responding.  Our dsl internet connection seems to work and we have previously had no trouble with connecting to the home location.  We have 3 computers that connect simultaneously to the server at each remote location and sometimes one computer will stay connected while others disconnect. 

View 3 Replies View Related

Windows 7 / V1000H - Wireless Keeps Dropping

Dec 11, 2012

Ive been having an issue lately with my wireless connectivity at home. We recently moved and Im using a V1000H from telus for my wireless network. Wired connections are fine but wirelessly my connection keeps dropping every few minutes for a few minutes and then comes back on its own. However I only have 1 laptop to test with and my cell phone which doesnt seem to be exhibiting the same problem as my laptop. I've tried formatting the laptop twice with 32 and 64bit windows and it still happens. ive tried many drivers and tried to disable any power management options that the laptop has and the wireless nic has.

Ive changed the channel on my wifi and the security as well but no luck. It was working the first day we had it setup just fine and then the next day it started dropping. The signal strength is always 4-5 bars as im just in the next room from my wifi. Ive also tried using a dlink router as an access point and disabling the wifi on the v1000h but had the same issue. Also the laptop im using is a sony vgn-ns330d with windows 7 32bit atm but i was previously using 64bit. The wireless nic is Atheros AR928x 10.0.0.75

View 4 Replies View Related

Actiontec MI424WR Won't Allow 2nd Login

Apr 28, 2012

Just upgraded to Verizon FIOS and had an Actiontec MI424WR Rev F router (firmware v.20.10.7) supplied. Went to white-list my ereader's MAC in router and intitial page asked me to change the default login and password which I planned to do anyway. I know what I changed them to. Made changes, logged out, then decided I really wasn't comfortable with WEP and went back to change it to WPA. All I got was "Login failed, please try again." Finally hit the reset button and started over at the "please change login and password" screen. I can get in then.

I've been through this six times now and cannot get past the initial login without a hard reset. Tried keeping "admin" as the login because I have met peripherials that are touchy about that. Not a major issue now that I have the router set up to my satisfaction, but it frustrates me to not have password access to any part of my system. (Yes, I am that anal.)

View 3 Replies View Related

How To Setup Actiontec Modem

Jun 10, 2011

I'm purchasing an Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway to be used strictly as a modem with Qwest DSL. I'm also purchasing an Asus Black Diamond Dual Band Processor, Hardware NAT, 5 Internal Antennas, Fast Gigabit Ethernet and 128MB DDR2 Wireless Router (RT-N56U) to be utilized a my primary router.My question is how do I set up the Actiontec modem to be strictly used as a modem without the wireless g function transmitting since I will be using the ASUS as the primary router? Or do I just let both of the transmit as routers together?

View 3 Replies View Related

Actiontec GT701-WG - Setting Up DHCPv

Aug 30, 2011

How to set up DHCP correctly on my Actiontec GT701-WG router?

View 14 Replies View Related

XP Laptop Won't Connect To Actiontec C1000A

Dec 10, 2012

I have Centurylink DSL as an internet provider. They recently replaced my old Actiontec GT701-WG with an Actiontec C1000A. Since upgrading the modem, I can't get my XP laptop to connect. I can get an iPad, Vista laptop, a Windows 7 laptop, and a WII to connect using the exact same settings I had on the old Actiontec.I've set the C1000A to WPA/WPA2-PSK and TKIP/AES. I do not have an access list enabled. I set the SSID and key to the same settings I had on the original Actiontec. I've upgraded the drivers on my XP laptop to the latest version. I can see the SSID in my list of networks but when I try to connect, it just sits there saying connecting. I've set up my old Actiontec as a wireless switch and can connect with the XP laptop without any problems. I've also connected to a Netgear 802.11N wireless router at another location without problems.

View 7 Replies View Related

Configure Actiontec PK5000 As A Repeater?

Nov 23, 2012

I've recently switched to a Verizon hotspot. For additional range while I'm at home, can I configure my Actiontec PK 5000 as a repeater for the hotspot signal?

View 2 Replies View Related

Update Actiontec GT701-WG Firmware?

Dec 8, 2011

I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware

View 4 Replies View Related

Actiontec GT724WGR - Can't Access Router Settings

Jun 26, 2011

I bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.

View 1 Replies View Related

Actiontec V100H - A New Router Incompatible With Vista?

Sep 11, 2011

We recently moved to a place with included internet that was going through a wireless network. All of my devices connect fine, no problem (iPhone xbox and USB adapter) but the lady friends laptop wont connect. It recognizes the network, connects to the network after the password has been entered but will not "give out" any internet. Signal Strength is very good (router is maybe 20 feet from us). All the drivers for the wireless adapter in her laptop are up to date and it will connect to other networks, like at her mom's. This is a newer router and funny enough we actually used this exact model at our last place and it had no problems with this. After calling our landlords ISP they said that there may be a problem with the compatibility of her laptop (its only 3 years old and connects to other networks fine) with the router, yet it connected to the same model not 6 months ago.

People we are at wits end and I am . As my username states If I cant find a fix for this I will enjoy smashing this thing to bits.

FYI: the router is an Actiontec V100H

View 8 Replies View Related

NIM-100 / MI424-WR / Installing New Actiontec With Multiple Modems?

Aug 4, 2012

I have a problem with a new Actiontec modem from Verizon FIOS The past few years I've had two cable modems working fine for verizon fios. Both were the NIM-100 from Motorola.The second "slave" cable modem is connected via coax cable.I recently replaced the primary NIM-100 and the associated wireless router with the new Actiontec modem MI424-WR IN viewing the network connection via the Actiontect control panel, it shows the other slave modem connected via coax but claims that the status is "Cable Disconected"

View 3 Replies View Related

Actiontec Q1000 - Stuck In Attempting To Authenticate?

Aug 31, 2011

I'm having difficulty connecting my desktop to my wireless network. Some details to start off: I'm using a G-Sky usb wifi adapter model number GS-28usb. I recently moved from an apartment with free wifi and I set up broadband with Qwest/CenturyLink. The modem/router is an Actiontec Q1000. The firmware is up to date (I checked) and every other device I bring into the house can connect just fine (laptop, roommate's desktop and laptop, and my blackberry) I'm running Windows 7 x64 Ultimate on all machines, with all updates currently available. My network shows up in the list of available networks, signal strength fine, but when I try to connect, it does its initial "getting information..." in the small box in the corner of the screen, then the box disappears and no connection is made. The status of my adapter at that point will say "attempting to authenticate" and will remain like that even though (apparently) windows has given up on trying to connect to the network. It never gets to the point where it asks me for the passkey. I've changed just about every variable I can think of that might affect this on the router (encryption type, b/g/n, legacy mode, compatibility mode, etc, i've renamed the network, powercycled the router, etc) all to no avail. I've tried to manually add the network settings under wireless profiles, but even though the information I put in is EXACTLY correct, under available networks its says that my settings don't match those on the network. I've tried different wireless adapters, and none will connect, so I've eliminated a faulty adapter. I can connect to my laptop with an ethernet cable, and bridge the connections so I can use the internet on my desktop, but i cannot connect directly to the router.

here is my ipconfig/all:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersPancho>ipconfig/all

[Code].....

View 1 Replies View Related

Possible To Use Actiontec Router M1424wr As Modem For Faxes?

Feb 16, 2013

My new PC does not have internal modem card.I use Verizon FIOS Actiontec router #M1424-WR rev F. What do I have to do to use as modem for receiving and sending faxes? Do I now have to buy an external USB modem?

View 1 Replies View Related

Actiontec MI424WR / Advantages To Gigabit Ethernet?

Mar 30, 2011

I am moving into an apartment thereafter. I have an HTPC in use, a personal computer for gaming/processing, and my fiancee has an Apple Macbook Pro that she uses quite often. I have an HDHomeRun Dual (2 tuners) for streaming OTA/QSM cable over the network (the HDHomeRun plugs into the network, not a computer). I also have a TV and Blu-Ray player that have ethernet ports.

Currently I use Verizon Fios and their Actiontec MI424WR router, which to my knowledge has gigabet ethernet. When I move I will probably be saddled with Comcast Xfinity Internet, which will supply a cable modem if I want, but no router. The only router I currently own is a Zyxel NBG-419N, which has only 100/10 ethernet ports. My current computers all have gigabit ethernet. For the home theatre components and my HTPC, I plan to pick up a network switch with gigabit ethernet. So my questions are:

1. If I use the Zyxel and the Comcast cable modem, would I be throttling my network speed at the router? I would hate to choke my speed just because one component does not have gigabit ethernet.

2. If I were to upgrade to, say, an Asus RT-N56U, would that make a huge difference on network browsing and throughput speeds?

3. Finally, what kind of cable is needed to maximize discernible speed increase? Cat5, Cat5e, or Cat6?

View 3 Replies View Related

Broadband :: Actiontec PK5000 Drops Signal 7 To 8 Times Every Day?

May 10, 2012

Why do I have to reboot my Actiontec gateway 7 or 8 times a day? Is this normal now days with any of the DSL services? I have Century link New computer.

View 1 Replies View Related

Actiontec GT704WG - Capping All Computers On Router To Certain Speed

Feb 22, 2011

capping all of the computers on my router to a certain speed. I like to play games and the others like to buffer movies, is there a way I can cap all of ours so we can each get smooth internet use? Be it by program or through the router it would be great to get it setup and working. Router is Actiontec GT704WG and has 4 computers hooked up to it, will post other spec's if needed.

View 2 Replies View Related

Protocols / Routing :: Port Forwarding On Actiontec Q1000?

Jul 15, 2012

I have my internet through CenturyLink which is a DSL connection running on an Actiontec Q1000 on a Windows 7 set up. I'm trying to run a subsonic server on my computer to stream my music collection. It was all working beautifully until I had to switch to this modem from my previous. Now, when I go to canyouseeme.org, it can't see that 4040 and 8080 are open. They need to be for subsonic to work? I've tried to set it up as portforwarding

View 5 Replies View Related

Qwest Actiontec Gt701-wg - No Internet Access On Vista?

Aug 9, 2011

I am running Windows Vista service pack 2 using my laptop - Hp Pavilion dv5-1111ea and I have a qwest actiontec gt701-wg router. When I try to connect to the router it says connected to local only and when I diagonise the connection it says that Security policy seetings on this computer might be blocking the connection.

The following policy might need to be adjusted to allow windows to connect: Policy Provider:Windows Firewall Filter Name: Query User

View 12 Replies View Related

Actiontec M1424WR Wireless Router - Setting Up Homegroup

Dec 18, 2012

I recently moved in with a friend, and we're having trouble setting up file sharing. His PC is connected directly (via ethernet cable) to an Actiontec M1424WR wireless router, which is broadcasting a WEP-secured wireless network. My PC is connected wirelessly (via an RNX-N180UBE usb adapter). Both machines are running Windows 7. Internet access is great. We tried to set up a homegroup, however, and are getting nothing but problems.He created a homegroup on his PC, gave me the password, and I joined on my PC. It said it joined and asked me what I wanted to share, but that's as far as we can get.

- On his PC, when he goes to the Homegroup page, it says "no other Homegroup computers are available."
- On my PC's Homegroup page, I see his computer name listed, and when I open it it shows libraries, but when I double click them it nothing happens
- He right-clicked his "downloads" folder and did "share with -> Homegroup;" I see it in my PC's Homegroup page but when I try to open it, the system thinks for a while before popping up a "cannot access" message
- I also shared a folder of mine to the Homegroup but, since he can't even see my PC, he can't see the folder
- I ran IPCONFIG on both machines; his machine's IP is 192.168.1.2; my machine's IP is 192.168.1.5
- When I ping his machine from my machine, I get "request timed out"
- When I ping my machine from his machine, I get replies.
- When I ping the router from my machine, I get replies.
- He has a printer. On my Homegroup page, it tells me that it has detected a new printer, but the "Install Now" button does nothing.

I've gone into Network and Sharing Center -> Advanced Sharing Settings and enabled "Allow Windows to manage homegroup connections." I did this on both machines.He runs a VPN on his machine. Thought that might be the problem, so we turned it off but nothing changed. I run both Hamachi and Tunngle on my machine. Disabled both of those but nothing changed.

View 2 Replies View Related

Linksys Wireless Router :: Will WRTU54G-TM Bridge With Actiontec?

Jan 27, 2012

I have a Verizon supplied actiontec g band router, and would like to place a WRTU54G-TM on the other side of the house to act as a repeater or a wireless bridge (?). I want stronger wireless at that other side of the house and beyond, and use cat5 to hook up some other devices.Can I bridge the actiontec and WRTU54G-TM together, or do they have to be the same brands?

View 1 Replies View Related

Actiontec Q1000 Modem - Can't Connect To Secure Wireless Networks

May 10, 2011

So we just got a new router for our higher speed internet. The modem is an Actiontec Q1000 from Qwest. We used to live out in the middle of nowhere, so we never needed to secure our internet. Now we live close to neighbors and we need to encrypt the wireless. When I try any encryption, however, I can't connect at all. I have tried temporarily having it unlocked and I could connect without a problem. It also works fine when I'm using my Ethernet cord.

Heres my IPCONFIG.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :

[code]....

View 1 Replies View Related

Find The Password Connected To IP Address On The Actiontec Router M1424wr?

Oct 1, 2012

HOW do I find the password connected to my IP address on the Actiontec router m1424wr?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved