HP Officejet 6500 Wired Ethernet Setup Fails?

Mar 25, 2011

HP Officejet 6000 wire ethernet set up always fails at end of set-up script. HP forum was useless. PC is running Win XP, router is Netgear WGR 614. Router shows printer as attached device. Printer connects OK with USB

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: HP 6500 OfficeJet Will Not Work With E6500

Nov 14, 2012

the printer was working fine with my old router, but with the new one, it doesnt' see the network.... It can see other wireless networks fine. 

View 9 Replies View Related

HP OfficeJet 6500 Wireless Printer Stopped Working After Securing Network?

Nov 29, 2011

I have run three computers on my wireless network for a few years now, and have an HP OfficeJet 6500 Wireless printer that has worked seamlessly on all computers. That is, until I secured my router. I had an open wireless connection that I changed to secure (WPA) a couple of weeks ago and have been unable to connect to my printer wirelessly to print. It will print if connected to USB. The first day I was able to enter in my WPA key just fine, but not since. It doesn't appear to be finding my connection. Oddly enough one of our computers (a laptop) is able to print to this printer so I am not sure. All computers are running Windows XP, I believe with SP3. I use a D-link wireless router. I have tried using the HP solutions to no avail and have checked in the documentation that came with the printer.As an aside, I now appear to also have another wireless connection which is a "computer-to-computer" connection, I believe an ad-hoc connection?

View 3 Replies View Related

HP OfficeJet HP 6000 - Conversion From Wired To Wireless

Mar 4, 2011

I have a HP OfficeJet 6000 Wireless that I used so far through the Ethernet network. What do I need to do to convert it over to wireless? Can I do this without installing the heavy duty HP SW on each client?

View 4 Replies View Related

Setup A Wired Ethernet Connection To A Wireless Belkin Router?

Feb 24, 2011

I'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.

View 5 Replies View Related

Linksys Wireless Router :: Setup With E1000 And HP Officejet Pro 850

Mar 12, 2013

I have two computers. My host computer runs Windows 7 64-Bit. Last December I upgraded from Home Premium to Ultimate, which may have changed my configurations though a month before I had to do a complete reinstall of the Home Premium before I acquired the upgrade. My remote computer is XP-Pro. The HP connection is wireless. There is no problem printing; but to use some features the HP on its control panel requires me to enter a proxy address. How can I configure my router settings to fully use the HP web services? At this point, the HP doesn't even update. I cannot access things like apps, ePrint and other web printing functions because of this sudden need for a proxy connection. It doesn't even show the email address for the device.

View 9 Replies View Related

Cisco Switching/Routing :: 6500 Ethernet Sub-interfaces Over Metro Ethernet

Feb 20, 2012

I curently have 2 Data centers connected with a Metro Ethernet Connection.  Each Data Center has 6500 with Sup720s.  The Metro Ethernet connection is currently conected by a L3 routed interface. I now need to enable VRFs between the locations and want to determine the best way to adjust the Mero.  I was considering adjusting the routed interface to use Ethernet sub-interfaces.  Each VRF would be given a different subinterface over the Metro Ethernet connection.  I have done this on internal LAN connections but am concerned about exteding across data centers over Metro E. 

View 1 Replies View Related

Cisco Switching/Routing :: 6500 What Happens When A Supervisor Fails

Feb 3, 2010

We've been mocking up a test lab to test VSS on two 6500's.  Each 6500 has one sup720 and a 6708-10ge blade and we've established the two 10ge links between the two chassis; the first from the each chassis' sup and the second from each 6708.My question is, what happens when the supervisor fails on one of the chassis?

View 10 Replies View Related

Linksys Wired Router :: E2000 - Security Wired Ethernet Connections

Sep 19, 2011

I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive.  I am planning to allow a tenant in another building connect via an ethernet cable connected to my router.  Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router?  I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.

View 1 Replies View Related

Wireless Fails But Wired Works

Nov 9, 2011

I have a brand new broadband service in my new house.The problem I have and the ISP support cannot understand is that using my laptop in i connect wirelessly to internet as soon as i request a page the router losing connection to the internet.But I can use my smartphone wirelessly that does not cause router any problems.If I use the lan cable the internet is fine and only disconnects every now and again.

View 1 Replies View Related

Cisco VPN :: Fails On 851 After Setup Completed

Dec 26, 2011

Using CCP installed Easy VPN after setup completed ran the test and it failed see below; What commands can I enter to check this? New at VPN so I am sure I have something miss configured. 
 
Router Details 
Attribute Value Router Model 851W Image Name c850-advsecurityk9-mz.124-4.T7.bin IOS Version 12.4(4)T7 Host name My Router 
Test Activity Summary: Activity Status Checking interface status... Failed
  
Test Activity Details  
Activity Status Checking interface status... Failed  
 
Troubleshooting Results ; Failure Reason(s)Recommended Action(s)All the crypto applied interface(s) are down or no crypto applied interface is present Make the connection up and then proceed with VPN troubleshooting.  

View 4 Replies View Related

Linksys Wired Router :: WRV54G - Windows Media Player Fails To Play

Feb 1, 2011

I have been able to play streaming video via Windows Media Player with no problems for just about forever until last month.No software has changed. i have the latest firmware (2.39.2e) for the router. i am able to play the same videos when i use my AT&T data connection or when i am connected at work, ,so i know it's not the files i'm trying to view. WMP fails to play whether i am hard connected or wirelessly connected.

View 1 Replies View Related

Medialink MWN-WAPR 150N Router / Setup Fails

Feb 17, 2012

I am having a trouble in setting up the new router, Medialink MWN-WAPR 150N with my laptop. I followed what the manual asked to do step by step, but at the end, a laptop detected strong signal for both wired and wireless, but it does not allow to connect to internet from both my laptop and smart phone. [code]

View 3 Replies View Related

Cisco :: 851W Initial Setup / SDM Wizard Fails

Jun 21, 2011

I bought a Cisco 851W router from a coworker about a year ago and tried setting it up at my home with nothing but headaches. I finally gave up and went with DD-WRT and have yet to look back (my $40 router outperforms this thing on so many levels, but I'm getting off-topic!). I recently re-discovered this beast and pulled it out of storage to see if I could get a test network setup at home to practice on. I checked for any IOS updates and downloaded (and installed) the lastest image (c850-advsecurityk9-mz.124-15.T15.bin). I consoled in and verified the initial 10.10.10.1 IP was configured in the VLAN1 interface and directly connected a PC to one of the switchports and pulled a 10.10.10.2 address. I pull up SDM from my browser (I have used FF, IE, and Chrome, all with the same results. Java version is the latest, 6 Update 26.) and it launches the initial configuration wizard. I go through the steps and get up to the DHCP Configuration (after LAN, before Internet/WAN setup) and try to click Next and nothing happens. It doesn't freeze as I can easily go Back, but can never move forward beyond the DHCP configuration. Pressing Cancel on the wizard just shuts down SDM as a whole and exits.
 
In my troubleshooting steps, I did notice that as soon as I click Next in the DHCP configuration, nothing will happen in the wizard, but the SDM window in the background will automatically present the "Apply Changes" and "Discard Changes" buttons, which weren't there in the previous steps. Of course, neither of those are clickable due to the wizard being open. I really don't want to configure this thing from scratch using the CLI if I don't have to..is there ANY way I can bypass the SDM Wizard at all? Also, I'm running SDM Express, would downloading ASDM and trying to connect from there make any difference?

View 1 Replies View Related

Linksys Wireless Router :: E3000 Setup Fails To Even Connect At All?

Apr 17, 2010

I have comcast Triple HD cable internet and I have been using a low end 5 year old Linksys Router.  I decided to upgrade and get the E3000.  So far I have had no luck at all getting it to work.  Setup fails to even connect at all.  I spent 2 hours on the phone with tech support.  There were in trying to get it up and running but we have been unable to get a TCP/IP number from my provider (comcast).  I hooked up the old router to see if any of my settings looked unusual but they seemed normal.

View 9 Replies View Related

Home Network :: TP-Link Wireless Access Point / Ethernet Switcher (TL-SF2005D) Fails To Connect?

Jun 6, 2011

I have just bought a TP-Link Wireless Access Point (TL-WA&01ND) and an ethernet switcher (TL-SF2005D).I have put the access point into client mode, allowing me to put it in my room and wirelessly connect to my router, allowing me to plug my PC in over ethernet and use the internet. However, after much fiddling with settings I cannot get it to work, as it continually searches for a network, and then fails to connect, despite the fact it is configured to use the network?I already have a similar setup with a netgear wireless G access point which works, and so I dont understand why the new box cannot do this when using what I believe to be the same settings.

Secondly I have an ethernet switch box which I bought to connect to the access point and switch the ethernet signal between my two PCs, my xbox and PC. This works fine with my primary PC (over my old access point) but when I try to connect my PC i get a DNS failure with auto IP settings and a gateway failure with manual settings, and other devices refuse to connect.

View 9 Replies View Related

Cisco Switching/Routing :: Cat 6500 - Possibility Of LLQ On Ethernet Modules

Sep 17, 2012

Is it possible to implement LLQ(QoS) on ethernet modules in the Cat 6500? For this feature, I can only find documentation about ES+ modules or SPA/SIP modules! (according to the feature navigator LLQ is supporten on the concerning HW and SW image)

View 2 Replies View Related

Cisco Firewall :: 6500 - Introducing ASA Into Setup Instead Of Using FWSM

Jan 3, 2013

We are thinking of introducing ASA's into our setup instead of using FWSM for our firewalls with our 6500. Currently we use multiple contexts with the FWSM, as we provide hosting services for multiple clients and want them behidn their own firewall. My question is how can we make this happen with an ASA. Since with the FWSM we use the backplane of the 6500 and SVI's for all interfaces between them. For example if we have 20 clients what will be the ideal setup for us to use with an ASA. If we can infact use mutiple contexts how can we? Is there a way we can maybe bundle all the ports in the ASA into the 6500 as a layer two trunk port and continue to use SVIs to manage all the clients.

View 3 Replies View Related

Unable To Connect Through Ethernet (Wired)

Aug 15, 2012

I am unable to connect through my ethernet (wire) whereas my wifi is working smoothly. This is what i get at ipconfig /all

Windows IP Configuration
Host Name . . . . . . . . . . . . : Salman-PC
Primary Dns Suffix . . . . . . . :

[Code].....

View 5 Replies View Related

Cisco Switching/Routing :: 6500 Setup In VSS Configuration - Port Channel ID

Jan 22, 2012

I have a pair of 6500's setup with VSS and there is currently only one link between then. However one end of the link is on Po10 and the other end is on Po25.  If I move the Po25 over to Po10, will things break? It seems to be working fine now. I'm about to add a second link and I'm concerned about the current configuration.  It makes more sense to me to have both ends of the same link on the same port-channel ID.  I've seen documentation which states otherwise however.
 
interface Port-channel10
no switchport
no ip address

[Code]....

View 2 Replies View Related

Cisco Firewall :: 6500 Setup In Active / Standby Fail Over Configuration

Feb 29, 2012

I have been having an annoying issue for the past few weeks with my ASA setup. We are using the ASA as our Remote Access Gateway and originally had it setup in a Active/Standby failover configuration using 2 x 5520 ASA's.The original setup of the devices was that the 2 x ASA were setup in a failover configuration, with both of them connecting back to the internal network via a 6500 device. Because of using failover I created a VLAN on the 6500 and put the two ports that connect the ASA's into that VLAN. I then configured the VLAN interface to be the EIGRP interface for the neighbour relationship to the ASA's.
 
The problem I am seeing is that the EIGRP neighbour relationship between the Active ASA and the 6500 keeps flapping. It occurs abour 4-5 times every day at randmon intervals. Sometimes the neighbour relationship will stay up for 6-7 hours, other times it flaps every 1-2 hours. I initially thought it was due to the failover configuration so I removed one of the ASA's and removed all of the failover configuration, but the EIGRP neighbour flapping problem still exisits. [code] Since removing the failvoer configuration I am thinking it could be a physical cable problem?

View 4 Replies View Related

Cisco Wireless :: 6500 - Unable To Connect Via GUI After Initial WISM2 Setup

Feb 7, 2013

I've installed our previous WISMs and other WISM2s previously and never had a problem.
 
6500 running SXJ2. WISM2 running 7.3.101.0 (which is what the rest of our WISM2s are on)
 
Insert WISM and go through initial setup. Run a show wism status on the 6500, and show sysinfo on the WISM. All looks good. Service port and management vlans are up. From the 6500 I can ping the service port IP, but not the management IP. From the WISM I can't ping the managment default gw but I can the service port. Unable to get anything back from the GUI..not surprising as not even ping works.
 
Now, as I said I've done it this way many times before...in fact I'm following my documentation from the last successful implementation and even adding in Cisco docs.

View 7 Replies View Related

VoIP With No Wired Ethernet Port Access

Jun 7, 2011

I have a VoIP phone that requires connection to a wired Ethernet port. I won't have access to the Ethernet port from my new apartment and need to connect over WiFi accessed by my computer. Is there a way to run the VoIP phone over that connection?

View 1 Replies View Related

Desktop Won't Detect The Ethernet Wired Connection

Feb 28, 2013

Recently I've been trying to switch to a wired connection. The cord and the port works because I tested and the connection works fine with my laptop. But my desktop won't connect. The light where the cord plugs in lights up but my desktop does not detect it.

View 1 Replies View Related

Can't Connect Via Wired Ethernet - Wireless Fine?

Apr 5, 2012

I built my first computer yesterday and everything went amazing. Unfortunately, I am having trouble simply connecting to the internet via wired, ethernet, cables. I can connect wirelessly but I need to connect wired as well. My IP when I am only using a wire starts as 169..I know this typically means there is a problem with my router, however, due to the fact that my laptop can use the wire router perfectly fine but my computer doesn't I am at a loss. I have downloaded the ethernet drivers but I don't know what to do.

View 2 Replies View Related

Can't Get Wired PC Online Via Linksys E1000 Ethernet Port

Mar 28, 2011

Im trying to get my PC connected online from an ethernet port on my router (linksys E1000) but cant get a conenction.no issues with the wireless connection.

View 7 Replies View Related

Dell :: Inspiron 6000 Ethernet Wired Connection

Oct 21, 2011

I have an Inspiron 6000 laptop with a Broadcom 10/100 adapter. I keep getting the error "network cable unplugged" and there is no activity on the LED in the back. Device Manager is clean (no errors)

deinstalled the driver and rebooted.Downloaded and installed a new driver and reinstalled it.Reset all my LAN devices - Routers, Cable Modems, etc.

View 1 Replies View Related

Home Network :: Using Both Wireless And Wired Ethernet Connections On Laptop

Aug 17, 2011

I have some servers running in my office and I have hooked them to a wireless router. I want to access those servers from my work laptop. At this time, I have to disconnect from my company network and assign static IP to wireless interface to access those servers. is there a way to configure my laptop so that i can be hooked to my company network through wired interface and can access my servers through wireless interface which is configured with static IP

View 9 Replies View Related

Connect Usb Wifi Dongle To Ethernet Port On Wired Router?

Jan 29, 2012

I would like to connect my USB WIFI dongle directly to my wired router, this would enable me to have wifi access without having my PC switched on all the time, is this possible and if so what kind of adapter do I need? I think I need USB A Female to Ethernet RJ45 Male Router Adapter.

View 5 Replies View Related

D-Link DIR-655 :: Ethernet Wired To HDTV NetFlix Streaming Drops

Feb 9, 2012

I have a DIR-655 that's wired via 40' of Cat5 Ethernet cable to a bus near my Sony HDTV. I get great reception and speed and all the available HD channels via my Time Warner Cable subscription.

My problem is that since subscribing to NetFlix (streaming only) when I stream a NetFlix movie I get "reloading/pauses" every few minutes. NetFlix says it requires 1.5 Mbps but Internet speed tests show I'm consistently getting between 5 and 10 Mbps.

I also have a Sony 3D DVD Player that is NetFlix enabled and when the pausing gets too bad I switch to it and sometimes it works, at other times it pauses just as frequently as the TV.

I always turn the PC off when watching TV.

Sony HDTV 46" LED EX720 Internet TV Features: Full HD 1080p in 2D and 3D, LED backlit, X-Reality Engine, Internet TV for streaming entertainment, Wi-Fi Ready, smooth motion with Motionflow XR 240, USB input

View 4 Replies View Related

Remote Desktop Hp Officejet 7310?

Apr 19, 2011

we log into a server that has windows nt through the windows desktop. Now i want to install the hp officeject 7310 to itHow to do i go about this, do i have to install a driver?

View 1 Replies View Related

Enable Wireless On HP Officejet Pro 8000?

Sep 5, 2011

I turned off wireless on my HP officejet pro 8000 and now I can't figure out how to turn it back on.

View 2 Replies View Related

How To Setup One Wired And Two Wireless Routers

Apr 24, 2011

My current setup is a wired connection from modem in office to Linksys WRT54G2v1 in livingroom and from it I have wired connections to Mac & Laptop back into office, Apple TV and another Linksys WRT160Nv3 located in far bedroom.The reason for this setup is that my home has been a vortex of death for wireless and cell receptionI have a guest house on same side of house as far bedroom and in order to get single to the person living there, I put in the WRT160N in the bedroom. This setup works but lately the 54G causing the wired connections to loose internet connectivity.This seems to happen to me every 2 years with Linksys and I end up buying newI purchased a D-Link EBR-2310 v2.01 non wireless router to put in and take all the wired connections off the 54G. But I fear I'll break everything when I try this. How best to treat the Linksys routers if I have the D-Link as the primary router

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved