Home Network :: IP Address With Unrestricted Browsing In Network

Oct 9, 2012

Well I went to command prompt and typed command ipconfig /all and saw the ip address my system was configured to. Dunno why, but I manually set that ip address in my IPv4 internet settings and got access in my hostel. Now suddenly the access is gone. What should I say, the ip address that I set my laptop to has been shut down ? It doesnt work any more? How do I get another IP address like that which gives me no restricted browsing? What does the admin do in the laptop that suddenly it gets unrestricted browsing privileges?

View 1 Replies


ADVERTISEMENT

Browsing From Home IP Address While Away From Home (using A Notebook)?

Oct 22, 2012

I would like to be able to browse the Internet from my home IP address while I am away from home (using a notebook)

View 6 Replies View Related

Home Network :: Getting Name And Last Name For A Dynamic IP Address

May 3, 2011

I am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.

View 5 Replies View Related

Home Network :: Ip Address In Same Subnet?

Nov 20, 2012

i want to give my switch a ip address with same subnet as a pc which is for eg having ip address of class a and subnet of 255.255.240.0

View 4 Replies View Related

Home Network :: Finding Out IP Address?

Oct 1, 2011

I am doing a security course and I need to find out the IP addresses of the devices on my network in order to carry out a ping of death on one of my devices. I've done the ipconfig command but that doesn't give me the information I need.

View 5 Replies View Related

Home Network :: Using Netbios Instead Of IP Address?

Mar 18, 2013

How can i connect two computer in same LAN with Netbios

View 3 Replies View Related

Block A Mac Address From Home Network?

Dec 16, 2012

How to block a mac address from my home network?

View 4 Replies View Related

Home Network :: Change Ip Address?

Jan 27, 2013

I play a game via gameranger, and i want to change my ip address. the replays for this game retain the ip of each player, so that is how it is traced. I have used various ip changers, however they only work properly when i am the host of the game. How to keep my ip protected 100% of the time, rather then only when i am hosting?

View 1 Replies View Related

Home Network :: Virtual Servers On One IP Address

Aug 6, 2012

I have one dedicated IP issued to my home, along with another dynamic one if I need it(but I don't use it). I have a webserver, mail server, and name server up and running on a single machine exposed to the internet with my static IP. I have a domain name registered to my IP address. My webserver and name server work great, but I am having difficulty with the mail server. In order to have mail work correctly, I have been told that I need to get reverse DNS setup for my domain (something I had neglected to do). My nameserver responds to reverse lookups correctly when issued locally, but it looks like queries from the internet never reach it (I think my ISP catches requests upstream). I contacted them and they put a PTR record in for my IP pointing to ns1.mydomain.com. This all works fine, but the thought occurred to me that if in my hosts file I put my MX record in as mail.mydomain.com., any mail clients that do a reverse lookup of my IP won't get mail.

View 6 Replies View Related

Home Network :: Access Point Lost Its IP Address?

May 17, 2011

To put it simply, my parents live far enough in the middle of nowhere that they have no access to high speed internet. Of course, there are always wireless solutions, but the options around here are pathetic and comparable to dialup. They were content with this; I moved back in with them for the time being and am not.y solution has been to dump just shy of $1,000 into a point-to-point wireless bridge setup that claims to have a range of 5 miles non-line-of-sight. I have one antenna set up four miles away on top of a building that has high speed internet.Unfortunately, I was a stupid fool and set that end up without enabling security, thinking that it wasn't a big deal. Nobody in that town has a mind for anything but farming and drinking. That was my mistake. Some asshole set a password and forced me to do a factory reset on the access point and now I can find no IP address. It's like it only reset halfway to factory defaults or something

View 6 Replies View Related

Home Network :: Static Port Address Translation?

Mar 24, 2011

In my router I can set rule that all traffic incoming to router's extAddr:8888, is forwarded to my intAddr:8888. But I also need reverse rule that packets originating from intAddr:8888 are translated to extAddr:8888. Can I do that? What technique can I search on google to find more information, because it is not port forwarding. I would calll it reverse port forwarding or static port address translation, but I do not find anything useful in internet searching these keywords.

View 3 Replies View Related

Home Network :: Netbios Broadcasts - What App Trying To Obtain IP Address

Dec 20, 2011

what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.

View 9 Replies View Related

Cisco WAN :: WAP4410n On A Home Network - IP Address Range?

Mar 5, 2011

I am trying to set up a WAP4410n Wireless access point and add to my home network. One problem I can't seem to get around. The IP adress range setup does not accept 1 (example 192.168.1.245) as a range setup for IP address. How do i get in communication with the unit when I can't view the setup due to the factory default set as 192.168.1.245? If it were 192.168.0.245 I could easily change my routers IP range to include it.

View 0 Replies View Related

Home Network :: Connecting Router - Unable To Get Dynamic IP Address

Dec 19, 2011

I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?

View 2 Replies View Related

Windows 7 Starter Can't Obtain Valid IP Address From Home Network

Nov 9, 2012

I have recently bought a Asus Eee PC with Windows 7 starter.It will connect ok to public Wifi (i.e. at the Qantas lounge) but will not connect to my home Wifi network - Netcomm N150 Router. The two other computer at home (running full versions of Windows 7) work fine over this network.When I look at the Station list in the Router's interface the MAC address for the new laptop appears but it has no IP address. [code] Have tried the obvious things like power cycling.

View 13 Replies View Related

Home Network :: Remote Ip Address Is Updating DNS Server But Unable To Ping It?

Apr 20, 2011

i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?

View 8 Replies View Related

Wireless Home Network With Verizon Internet Security - Changing IP Address?

Dec 24, 2011

I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop

View 6 Replies View Related

Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?

Feb 24, 2013

I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:

- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface

Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.

- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.

- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.

Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.

Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)

Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).

View 5 Replies View Related

Home Network :: Belkin F5D8635-4v1 - Access Multiple Servers From One Dynamic IP Address

Jan 23, 2012

I am working with MS Windows 2008 R2 and a Belkin F5D8635-4v1 router.

I have already set up a dynamic IP address which points to my router at home. In my home network I have multiple PC's that I would like to access from the internet. I would like to achieve this without needing to change my port forwarding rules on my router each time...

My thoughts are that I use a single dynamic IP address pointed to my router. My router then forwards to a server with some sort of software that can then forward to the correct PC based on the host name.

So I have 3 domains set up all pointing to the router's IP address:

dest1.domain.com -> 41.xxx.xxx.45
dest2.domain.com -> 41.xxx.xxx.45
dest3.domain.com -> 41.xxx.xxx.45

The router is not smart enough to redirect by host name, so it will just forward everything to 10.0.0.20 The server based at 10.0.0.20 must then have software to now redetermine the target based on the host name. The rules would be set up as follows:

dest1.domain.com -> 10.0.0.22
dest2.domain.com -> 10.0.0.24
dest3.domain.com -> 10.0.0.26

View 1 Replies View Related

Slow Internet Browsing On Network

Jun 5, 2012

I am trying to troubleshoot an issue on our network that is resulting in extremely slow internet browsing. I have found out that the first request in a ping always timesout. Also, having the same issue with running a tracert. I have included some screenshots

View 7 Replies View Related

Routers / Switches :: Block Network Browsing On LAN

Jun 3, 2011

I want to block everyone from seeing each other on the LAN. So when someone goes to network neighborhood they can't see no one else on EXCEPT for the pritner or so. I want to do this using a Cisco 1841 router. How can I do this?

View 2 Replies View Related

Home Network :: Need To Extend Reach Of Wifi Network At Home

Oct 20, 2011

Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.

View 1 Replies View Related

Home Network :: Install A Wireless Network In Home Environment?

Nov 10, 2011

How to install a wireless network in home environment?

View 6 Replies View Related

Home Network :: Need Input On Network At Home Newly Wired

Jan 14, 2012

I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.

View 1 Replies View Related

Home Network :: Can't Get D-Link DGL-4500 To Accept Home Network?

Sep 10, 2011

I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."

View 3 Replies View Related

Cisco Routers :: RVS4000 - Browsing Remote Network Computers?

Feb 24, 2010

I have recently bought RVS4000 and I'm having problems with remote network computers. I can only access them by IP, by name it always fails. Localy I have BEFSX41, remotely RVS 4000, connected throught VPN. Everything else is working fine.

View 6 Replies View Related

Home Network :: IPhone Kills Home Network

Oct 17, 2011

Every time I connect to my home network with iPhone 4 my whole network stops working. Windows 7 is not reporting any problems with connection, nor is my router. I have cable connection with my PC and wireless with my laptop, they both just stop working without any visible reason. Even the iphone i connect with wont work, but of course it says its connected and everything is ok.I tought it was an iOS 5 problem, so I reinstalled it. It worked for an hour then its all back again. I even tried sharing my PC conection so that my iPhone is connected to PC and not directly to router.But that produced the same results.

View 6 Replies View Related

Home Network :: Unique Situation With Home Network

Mar 9, 2013

My Set up at home is as follows: [code] Now according to what I have read I should be able to set the subnet on .2.0 network to a subnet of 254 and this gives me 512 Hosts I believe however my question at this point is how to route between 192.168.1.0 and 192.168.2.0.Or when I set the subnet .254 does the router just route it automatically.I would still set the subnet mask on both networks to 254 correct? I believe I can only use 192.168.0.1 to 192.168.1.255 w/.254 subnet mask. However I already have some servers that are configured with applications (On the 192.168.2.0 network) that I do not want to change ips on because it would be a pain to reconfigure so, my other question is other than using .252 to extend it to 192.168.0.1 to 192.168.3.255, (I need the 192.168.2.0) is there anything I can do? Like use 192.168.1.0 with subnet mask of 255.255.254.0 to get the 192.168.2.0 network? The reason I asked is I was using a subnet calculator to try and figure this out but every time I put in 192.168.1.0 with .254 subnet mask it changed the ip to 192.168.0.1 to 192. 168. 1. 255.I would really like to use the netgear only. The way I have it now is not working I am able to ping the internet from the 192.168.1.0 network but I can't ping from 192.168.2.0 network to the 192.168.1.0 network.

View 2 Replies View Related

Home Network :: Setting Up A Small Home Network Of 10 PC's?

Jul 27, 2012

want to setup a small home network of about 10 PC's.I want them to share the internet connection of 25mbps.I also want Printer Sharing.

View 2 Replies View Related

Home Network :: Integrating 3550 Into Home Network?

Jul 13, 2012

At the moment I have my home network (192.168.0.0/24) like as below (all connect using straight cables): [code] My Cisco lab equipment are in the basement all connecting to an access server which at the moment is plugged into Switch3-dumb (along with a printer & NAS).What I'm thinking is to replace the Switch3-dumb with a 3550 I'll be picking up later this week.Then using this to do as the Switch3-dumb did maybe by creating a native 'vlan 192' & putting it into a gig interface which will connect to the network using the straight cable, also putting the printer & NAS into the same vlan.This will hopefully still give me connectivity throughout.Then when required I'll like to use the 3550 with the rest of my Cisco equipment for setting up different labs (segmenting them from the home network by using different vlans etc.One of my reasons to implement the 3550 into the home network is to be able to play about on a regular basis (port monitor, traffic stats, etc).

View 2 Replies View Related

How To Change IP Address For Browsing

Jun 20, 2012

I'd like to register another account in a forum to comment anonymously so I need a different IP address for browsing.I remember that I had been trying this long time before but it was not easy to make it. Using proxy website is useless because the speed is very very slow. Is there any way to painlessly, easily change IP to browse websites?

View 4 Replies View Related

Home Network :: Private Network Within A Larger Network?

Nov 14, 2011

I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.

Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.

View 1 Replies View Related

Home Network :: Use Laptop As Network Tap Between (DSL) Modem And Wrt54gs By Creating A Bridge?

Jan 8, 2013

I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...

DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.

Am I completely misunderstanding the purpose of a NIC bridge?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved