Huge Lag In Call Of Duty 4 After Installing Thomson TG585v7 Modem Router?

Jun 6, 2011

So I used to use a Thomson TG585v7 modem router (wireless) as my means of connecting to the internet, the aerial cracked on it and I began getting dropped connections, so I went out and bought a D-Link DSL-2730B modem+router. I am hooked up wirelessly to the internet as there is no phone jack in my bedroom, and I experience massive and prolonged lag while playing call of duty 4 multiplayer, which I never had before with my old Thomson modem. My ping also shoots up to about 400 and then 999 while I teleport around the map.

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4100 Can Setup A LAN Game Of Call Of Duty Mw3

Feb 22, 2013

With the E4100 I can setup a LAN game of call of duty mw3 and 1 xbox can join the other, pretty simple, Ive always been able to do this with all xbox games that have LAN ability.With the EA6500 I see the game is availible on LAN, but I can never connect to the game, it tries to connect and says cannot connect.Any LAN settings Im missing here, or just another EA6500 bug to add to the list?

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Host Migration Failed On Call Of Duty By MW3

Nov 8, 2011

I just bought mw3 but when I try to start multiplayer the game direct me to this, [URL]. I don't know how to fix it, and my UPnP is enable

View 6 Replies View Related

Can't Connect Wirelessly To Thomson TG585v7?

Oct 25, 2011

Ok I know you have had this question asked before but I think mine is slightly different. So, I have my Thomson wireless router for 2 years now and I've been using it with no problems at all. Suddenly I got dissconnected two weeks ago and it would not let me connect with anything. I could SOMETIMES see my home network in the list but I couldn't connect to it, although I could easily connect to other wireless networks. I tried reseting the router, changing the encryption to WEP and all that few days ago and after several tries I managed to access it (I don't know what happened) but after less than a day the same problem occured and since then I've been trying to reconnect. Yesterday I took it to the local ISP representative and he "fixed" it although I'm sure he just reseted it and changed the ancryption type and the WPA-PSK encryption key(something which I did MANY times before). When I came home I had the same problem with a slight improvement, now I could see my network in the list of wireless networks at all time. When I try to connect, the window "Windows can not connect to .....Diagnose the problem..." pops up.

It automaticly connected few times but once I tried opening the router access IP or any other webpage it just disconnected me. I tried accessing the network with my mobile(wifi) phone and I still couldnt, which made me think in the beggining that the problem is not in my computer. The router is close to my laptop and my laptop is working just fine and can connect to other networks. I've never had such problem before and I'm using the router for 2 years.

View 4 Replies View Related

How To Play Multiplayer Call Of Duty

Dec 17, 2011

In Age of Empires ESO will let me log in to game, but fail to join games in lobby

View 1 Replies View Related

D-Link DIR-655 :: NAT Type Strict For Call Of Duty Black Ops

Jan 12, 2011

i followed the instructions on the link and I can not for the life of me get my NAT to display OPEN or even Moderate. Always says STRICT. I have tried all the link and all the videos about forwarding ports followed all the instructions to the T. But the PS3 in the DMZ. And still, Nothing. It's BS.

Using router FW: 2.00NA
Ports Forwarded: TCP 80-81,443,5223
UDP 2005,3074,3075
TCP 3074
UDP 3478

Assigned QOS engine rule to the IP of my PlayStation and set it to priority 1.UDP Endport Filtering and TCP Endport Filtering Both set to independent?Enabled Anti-Spoof Checking?

View 13 Replies View Related

A Thomson TG585 V7 :: How To Access Modem Router Behind Another

Feb 16, 2013

A Thomson TG585 v7 (Modem + WiFi Router) receiving a DSL connection and Providing internet access on two interfaces connection :
1- WiFi : to connect portable devices at my home.
2- 4 Ethernet ports : to connect my desktops.
One of these ports on my Thomson is connected to a D-link unmanaged switch to provide extended wired connections. From this unmanaged 4 ports switch one port is connected to my neighbors in another building through UTP, and connected to a D-link DIR 605-L WiFi router, the IP address of the DIR 605-L is 192.168.1.77 and the IP address of my local Thomson is 192.168.1.254 which means they are in the same network. I need to access the DIR 605-L WiFi router from my my home where I am connected directly to Thomson router through UTP cable, I am not able to do that !! , while also I can't even ping the DIR 605-L IP 192.168.1.77.

View 1 Replies View Related

Thomson Tg782 - Share USB Modem Internet Through Router?

Oct 3, 2012

I have a Thomson tg782, with a USB port on the side. I want to plug my sub modem internet into that usb port, and then share that connection over wifi, because the router has a wifi function.

View 4 Replies View Related

Thomson St-330 Modem - How To Change Global IP Address Without Restarting Router

Dec 4, 2012

I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???

View 2 Replies View Related

Setup A Canyon CN-FW514 Wireless Router Through A Thomson Modem

Feb 11, 2011

I'm trying to setup a Canyon CN-FW514 wireless router through a Thomson modem.When I first started trying, I could get up the set-up screen on [URL] however this is as far as I got; the laptop said it had a very strong signal with the wireless connection, but I could not get any web pages to open (windows explorer couldn't detect any problems either). The Thomson modem works when I conect it to the laptop via the ethernet cable, but that's not much use to me trying to use the internet elsewhere in the house!I tried changing the IP address, subnet mask and gateway IP address on the set-up screen [URL] which seems to have been a big mistake; I now can't even get the set-up screen to appear.I've reset the internet options and have set everything to obtain the IP address automatically but am still having no luck.

View 5 Replies View Related

Bridging Thomson Speedtouch To Belkin N Series Modem Router?

Nov 8, 2011

Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment. Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.

View 3 Replies View Related

D-Link DIR-655 :: Can't Connect Router After Installing Modem

Jan 17, 2013

i just installed a dlink dsl-520b modem. I installed it using the cd wizard without the router connected. Now when i try to hook the router [dir-655 rev B v2.10NA] up the world light is orange and i cannot get a connection. I tried running the wizard but it times out and says it cannot find the server. I used the reset button and that did not work. It says to use a PPoe connection and i have the right password but it will not connect.

View 4 Replies View Related

How To Receive A Call From Modem

Aug 3, 2011

i use my sim card in modem connected to pc to surf. is it possible to receive calls as i surf through this sim card?

View 1 Replies View Related

Thomson TG782T Modem - Gateway Not Found?

Jul 3, 2012

I purchased a computer which has a GA-B75M-D3H motherboard in it.I have been attempting to connect it to the internet with little success. I have a Thomson TG782T modem hooked to the computer by ethernet cable. The computer does not recognise the modem and the modem does not find the gateway on the computer. I have discussed the problem with Telstra and as far as they are concerned its not their problem due to the cable showing green and amber light into the back of the computer and the modem is working. The computer guys are saying that the computer is fine as they utilised the net to load the computer.

View 1 Replies View Related

D-Link :: DIR 615 - Comcast Thomson Modem With VOIP

May 28, 2010

Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson.  The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room.  How can I force the DIR-615 to accept the Thomson ACG905?  If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings. 

View 6 Replies View Related

D-Link DIR-651 Installing Wireless Router Downstream From Modem / Router Combo

Nov 24, 2011

I have a buddy who owns a bar and wants to install a insecure wireless router for his customers downstream from his SBC Global ATT Modem/Wireless Router combo.

-Modem/Router Combo: Actiontec GT724WG
-Downstream Unsecure Wireless Router: D-Link DIR-651

He says has 3 static ips for the modem, and 1 of the network cables coming from the modem directly into the D-Link Router. I first attempted to just plug it into the uplink, and let DCHP do its magic, but I had no luck with that. I could connect to the router but it didn't have internet.

So I restarted the downstream router, and plugged the network cable into the 1st port, and suddenly I had internet on the wireless but it would constantly go up and down, and ping times were extreme erratic.

View 8 Replies View Related

Routers / Switches :: Only One Task Available When Log Into Thomson TG585 V8 Modem

Apr 7, 2011

I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?

View 2 Replies View Related

Thomson ST516 V6 DSL Modem - Slow Browsing While Downloading

Nov 30, 2012

I am using a Thomson ST516 v6 DSL Modem, through which I have connected a Tenda W311R+ Wireless Router. There's two laptops, one running Windows 7 Sp1, the other running Windows Xp Sp3, and an Android based phone using this connection. I should mention that the problematic laptop had Windows 7 before switching to Xp and ran without any issues.

[code]....

View 12 Replies View Related

Thomson THG520 Modem Does Not Give IP Address On Both Links

Apr 14, 2011

My ISP gave me a Thomson THG520 modem when I subscribed to their service. It has 2 links and USB and an Ethernet link. It worked fine with our 2 computers but for several weeks or so I experiencing that it only gives me IP address only on one interface that one that's first plugged into the computer.

If I reset the modem and plug in the USB I get an IP address immediately. If I unplug the USB and plug in the Ethernet cable I don't get an IP address. If I reset again the modem and plug in the Ethernet cable I get an IP address but not on the USB link after I unplug the modem.

EDIT: after entering the modem's administration I realized it's firmware was updated (probably my ISP did it.). Also I read about how this stuff works, there is an evidence that my ISP set the CPE limit to 1. (so it seem only one computer connected to the modem can get IP address while the other can't.). And this configuration is stored on the modem somewhere. Is there a way to view it somehow?

View 1 Replies View Related

Change Arris-TM502G Modem When Installing A Dual-Band Router?

Jun 14, 2011

Do I need to change myArris-TM502G router when changing to a Linksys E4200 Dual-Band modem

View 2 Replies View Related

Connecting 2 Printers To Telstra Thomson (TG782T) ADSl Modem?

Feb 28, 2012

! have a TELSTRA ADSL wireless router ( Thomson TG782T)I need to connect my 2 printers to it so I can operate them wirelessly to my laptop and Desktop computers

Laptop: TOSHIBA Satellite w/- windows 7 Professional

Desktop: ASI Computer w/- Windows 7 Ultimate currently connected to ADSL modem by yellow network cable.

View 1 Replies View Related

Limited Web Connectivity On Laptop After Installing New Modem?

Apr 7, 2011

OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3764 Mb
Graphics Card: Intel(R) HD Graphics, 1754 Mb
Hard Drives: C: Total - 461899 MB, Free - 248738 MB; E: Total - 476821 MB, Free - 6 MB;
Motherboard: Dell Inc., 029DYC, , .5CZ41M1.CN1296104U1550.
Antivirus: Charter Security Suite 9.01, Updated and Enabled

I just upgraded to a faster internet speed with my cable company, and so they came and installed a new combination modem/ wireless router yesterday. Since then my computer has said that it is connected to the internet but when I try to load pages sometimes they work and sometimes they don't. Mostly they don't work, and when they do they are very slow and don't always load pictures, video, etc. The other computers and devices in my network have no problem with the internet connection. My computer connected perfectly before the new modem was installed, and it works when it is plugged in directly ( it was plugged in the entire time the cable guy was setting up the network). I tried running the diagnostic tool and sometimes it says that the dns server isn't responding and other times it says it can't find the problem or that it can't find any problem.

View 9 Replies View Related

Thompson TG585v7 Won't Port Forward?

Nov 14, 2011

I have a Thompson TG585v7 router and i have been trying to port forward ports 36666 for my home CCTV system. I created an new application (which i called cctv) which was fine...it was when i tried to assign the new application to the LAN devise iv been having problems.In the 'application' bar i see my application labelled cctv.....then in the device bar i select the 'user defined' option to manually input the devise IP and the router just refreshes and doesn't store the forward that i want

View 3 Replies View Related

After Wiping Windows Vista And Installing XP DPC2203 Cable Modem Won't Connect

Jan 7, 2012

I wiped vista and installed windows Xp now my modem wont recognize and i dont have internet. i have tried burning the Drivers from Cisco onto another CD From another Machine but it says it needs internet connection to do so. i can't connect or anything i have a DPC2203 cable modem?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Why Huge Packet Loss At Gig But Not 100Mbps

Nov 20, 2011

Vista 64 Intel Pro 1000 with latest driver Here is a shot of the lagometer in COD Black Ops when all is good. I used to see this with my old WRT54GS and connected at 100Mbps Full Duplex or Half Duplex and I currently see this when connected through the E4200 at 100Mbps full or half duplex AND when connected via Gigabit via one of the 4 ports on the back of my cable modem, a Motorola SBG6580 [URL] This next screen capture is what happens when I try to connect via Gigabit thru the E4200. It either starts out like this right away or within 30 seconds to a minute this will start to occur. I believe the red spikes indicate packet loss. [URL]

View 8 Replies View Related

Networking :: Linksys WRT320N - Use Hostname To Connect To Machines On LAN TG585v7

Jul 27, 2011

I have just had my broadband upgraded to FTTC which means my router has had to change. Previously I was using a Thomson TG585v7 ADSL thingy provided by my ISP. One nice thing about that router was that it would act as a local DNS and allow me to find my other machines on the network by using <hostname>.lan instead of IP addresses.

I've now switched to a Linksys WRT320N ethernet router which connects to my fibre modem, and which I've updated to the latest firmware (1.0.04). I have 2 machines on the network which I regularly want to connect to each other; one is running Windows 7 and the other is running OS X Lion.

The problem I'm having is that I'm unable to connect to my Win7 machine from the OS X machine using the Win7 machine's name. However, I'm able to ping the OS X machine from my Win7 machine using the hostname.

View 2 Replies View Related

Thomson Tg585 V7 Router - Can't Get Access To It

Feb 15, 2011

I have a problem with my thomson tg585 v7 router wich is that I can't gain access to it, each time I enter the default username and password (admin ; admin) it automaticly brings me back to the previous page.

View 1 Replies View Related

How To Find Thomson Router Password

Mar 4, 2013

I am trying to reset my wireless network's security key and so far it is not working.

View 1 Replies View Related

Linksys Cable / DSL :: Atlanta 2100 - When Installing Driver To Use Usb Cable Modem Does Not Recognize It

Dec 13, 2012

I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.

View 3 Replies View Related

Configure Thomson TG585v8 Wireless Router

Jan 2, 2012

i have configured my wireless router.But im having problems. I can connect to the the internet using a lan cable which is connected to the router. but when im using the wireless connection i do not have internet connectivity.

View 1 Replies View Related

Thomson TGW850-4 Router - Splitting The Connection In Two?

Feb 4, 2012

I have cable internet with 12 Mbit download and 1.25 Mbit upload speed. I'm using Thomson TGW850-4 router and I'm sharing the connection with my brother. Each of us have our own PC, of course.

Problem is, my brother downloads torrents while I play online games which completely screws up with my ping (from 40-80 to 350+) which makes them pretty much unplayable.

Is there a way to split the connection in two so that each of us gets 6 Mbit download and 0.625 Mbit upload at all times so that his torrents don't interfere with my online games?

View 7 Replies View Related

Thomson TG784 Router Can't Get DHCP Server?

Aug 21, 2012

I'm using a Thomson TG784 router, but it can't get it's DHCP server. This is what it gives me once I let it configure itself.

Note: I pressed the reset button on the router and reset it to the factory defaults.

View 1 Replies View Related

Connecting Thomson Dwg855 To Wireless Router

Feb 9, 2012

Our ISP provided a Thomson dwg855 at installation of our service.We need greater coverage.Is is possible to use the output port on the modem to connect to a wireless router or other wired device?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved