Limited Or No Connectivity - Unable To Contact To DHCP Server

Aug 30, 2012

Until a couple of days ago I was able to connect to the internet wirelessly on both my laptop as well as my desktop. However, that has changed for the desktop, now I am unable to access the internet on it. It says that it can detect the signal. When I tried to renew the ip it responded with "An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out." [code]

View 5 Replies


ADVERTISEMENT

Limited Or No Connectivity / Unable To Contact To DHCP Server

Nov 30, 2012

I have just installed the wireless equipment on my main computer, but unable to pick up the internet on my 2nd computer, how do I do it??

View 1 Replies View Related

Gateway 818gm - Limited Or No Connectivity / Unable To Contact DHCP Server

Apr 20, 2011

I have a Gateway 818gm desktop pc and the wifi stopped working after I reformated the hard drive. I can not figure out where the wifi card is in this PC.

View 1 Replies View Related

Unable To Contact To DHCP Server?

Nov 2, 2011

I've been trying (in vain) to connect a USB Wireless device to be able to use it off my wireless network. I have (2) other laptops and (1) other desktop connecting to the router with no issues. For some reason, this old desktop keeps installing an Ethernet device (probably on the MB) and is automatically Configuring the IP address to that instead of the USB wireless device.I've tried uninstalling the Ethernet device but it comes right back after I do a reboot. Even when I disable it, I still can not connect with my Wireless device.

View 14 Replies View Related

Computer Is Unable To Contact DHCP Server

Feb 10, 2012

need to know why I can not connect to the internet after I am done downloading windows Xp on my Desk top. I got an error message from the cmd, saying that computer is unable to contact DHCP server.

View 1 Replies View Related

Unidentified Network / Unable To Contact DHCP Server

Mar 13, 2013

I just moved to Auckland, NZ from the USA to go to school at the university here, and am having a problem connecting to the internet in the university residence hall in which I am living.Wifi is not available in the residence halls, so we need to use an Ethernet cable. When I plug in my computer, the network adapter icon says Identifying for a while then settles on Unidentified Network with no internet access, the IP is 169.x.x.x.When I try to release and renew the IP, it says unable to contact your DHCP server, request has timed out".I've tried multiple Ethernet cables, both brand new.I tried connecting to a port in a friend's room in the same building, and even in a classroom on campus, and both had the same result.Naturally after all that I assumed my NIC somehow died overnight while I traveled here, so I went to a computer repair shop expecting to have some hardware replaced, but we plugged it in there and it worked immediately so they weren't sure what to tell me.

I've gone through pages of old threads at this forum and others like it, trying solutions but having no luck.I've power cycled my computer, obviously I can't power cycle the whole network as it's for 200 people, but the IT people here have tried resetting it for me on their end as best they can. [code]

View 14 Replies View Related

Dell 570 Inspiron / Unable To Contact DHCP Server

Jun 18, 2012

I have a Dell 570 Inspiron desktop running win7 home premium w/ a 64 bit OS. I have Frontier dsl with a Westell 327W modem and a netgear router. Two desktops are connected to the internet...one through the modem and the Dell 570 through the router. I also run laptops through the router w/no problem. This morning the dsl went down, and when it came back up, the Dell 570 would not connect. i tried Diagnosing Connection Problems, and I'm told to turn off the modem/router (which I have done a gazillion times).When I look at Network Connections in the Control Panel, It tells me I have an unidentified network and can't connect. I read through some forums earlier, and found that releasing and renewing ipconfig often corrects the problem, and that's when I got the message that 'An error occurred while nenewing. Local Area Connection unable to contact DHCP server.' This set up has worked for the past year and a half. I looked at the network adapter, and it says it's working properly. I changed the cables going to the machines, and they both work on this computer. The only change made to the computer was to install McAfee security center through AOL yesterday, but the set up worked all yesterday and last night.

View 2 Replies View Related

Cannot Renew IP Address - Unable To Contact DHCP Server

Mar 31, 2013

I randomly lost Internet connection, and since have not been able to Renew an IP address! Other people in my household can connect just fine. I've tried numerous things to get my internet back, but continue to be unsuccessful in doing so.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsMike>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : miker
Primary Dns Suffix . . . . . . . :

[code]....

View 19 Replies View Related

Unable To Contact DHCP Server / Request Timed Out

Oct 15, 2011

I have reinstalled windows 7 on my Toshiba laptop, I have my wireless set to automatically connect, I have excellent signal strength and have another pc connected to wireless router, but my laptop does not capture IP addresses. I tried renew command but got message unabl to contact your DHCP server, request timmed out.

View 1 Replies View Related

Unable To Contact DHCP Server Wirelessly - Request Timed Out

Jul 3, 2011

I've been having problems connecting my laptop to the internet through wireless. When I plug it in with a cable it works fine. I also know my wireless works fine because i have other things attached to it. When I try to connect it says limited or no connectivity, but the signal strength is excellent. I have tried to repair the problem but it then tells me it cannot renew my ip address. I've also tried the ipconfig /release then renew, and thats when it says about my DHCP.

View 1 Replies View Related

Cabling / Cards :: Unable To Contact DHCP Server - Using Netgear Powerline

Jun 18, 2011

I can connect directly to the router wirelessly without any problems. When I use my powerline adapter I get the 'unable to contact DHCP Server' error. I've tried unencrypting the router with no success. I've also released/ renewed my IP. [code]

View 1 Replies View Related

Renewing Interface Wireless Network Connection - Unable To Contact Dhcp Server?

Feb 16, 2011

Started this morning woke up checked my phone no wifi hmm weird checked my hp tpuchsmart connected but jo internet access checked my router(netgear wireless N 300) made sure my modem and all wires are connectedNext went to my router ip 192.168.1.1 after reading some forrums i thought maybe if i changed the ip or sum i would have worked i know dumb though.. any way i believe i disabled my dhcp.. and one of the ip ad on the same page to 192.168.1.3 thats when it got worst i tried ipconfig/release saysNo operation can be performed on bluetooth network connection 2 while it has media disconnected.No operation can be performed on local area connection while it has its media disconnected(Its a wireless connection from my touchsmart to my router) I have tried goin back to the routers page but i can no longer find itI have also tried ipconfig/renew but i get this...No operation can be performed on bluetooth network connection 2 while it has its media disconnectdAn error occured while renewing interface wireless network connection : unable to contact your dhcp server. Request has timed out.No opration can be performed on local area connection while it has its media disconnected

View 3 Replies View Related

Linksys WRT120N Router - Unable To Connect With DHCP Limited Or No Connectivity

Feb 1, 2012

I'm seeing some weird behavior trying to connect my Windows XP SP3 desktop via a USB wireless to my Windows network via Linksys WRT120N Router. It is unable to connect with DHCP. "Limited or No Connectivity" is shown on the network icon and no internet connectivity is present. When i manually assign a static IP, i am able to get connectivity to browse the internet, and I am able to ping the other computers in my network, but I am unable to view the windows workgroup. I am able to manually map network drives, but those drop continually. There seems to be no rhyme or reason to the connectivity and the dropping while I am using the static IP. DHCP does not work at all. I'm just trying to get this computer connected to the windows workgroup so that I can map network drives and printers once and for all. Right now the rest of the network (ethernet cabled to router) works fine. I'm thinking it may be something in the routers wireless config, as I am having the same issues (DHCP not working at all, static IP working but constantly dropping) with a Mac laptop.

View 3 Replies View Related

Unable To Renew IP / Limited And No Connectivity?

Apr 24, 2011

So I have decided to register here and see where that gets meWhen I try to repair my wireless network connection, it gives me the error: "Unable to renew your IP address" accompanied by a little bubble that says something about limited or no connectivity. Other computers are working fine, so I doubt it's the modem.If I try to go into the cmd and type in "ipconfig/release" it says that it's already been released. Then when I type in "ipconfig/renew" it takes a while, but tells me something along the lines of "unable to connect to your DHCP server."I've tried the winsock fix and that hasn't done me any good. I've also tried: netsh winsock reset, netsh int ip reset reset.log, and netsh winsock reset catalog. All useless.[CODE]

View 7 Replies View Related

Unable To Connect With Internet - It Says Limited Connectivity?

Jan 15, 2011

I recently added a new laptop to my network and it will only connect wirelessly for short periods of time and then it says limited connectivity. I had this problem with the old laptop and got it fixed but it was running windows xp and this one runs windows 7.

View 4 Replies View Related

Cannot Communicate With Primary DNS Server - Limited Connectivity?

Jan 16, 2013

sometimes my internet just drops, asin it just goes to limited connectivity and appears to not send or receive any packets, sometimes a windows network repair will work and sometimes it wont, i cant fathom out what it is, and its annoying when trying to download :/ but either way the only message im getting from windows network connect repair thingy is that " cannot communicate with primary DNS server "

View 2 Replies View Related

Servers :: Got Message To Windows Server 2008 Limited Connectivity

Dec 27, 2011

In windows server 2008 i got the mess "limited connectivity" after one hour (approx)

View 2 Replies View Related

Cisco Wireless :: AP 1131 DHCP Server Connectivity Between IPad And AP

Jul 17, 2012

I configured DHCP pool on Cisco AP 1131, Laptop users are working fine and obtain IP address from AP 1131 DHCP Server, but IPad user is getting IP problem when he try to connect Cisco AP 1131.when i reboot the AP, IPad user getting IP address from 1131 AP dhcp server and access the network resource for the 2-3 hr after that IPad show "obtaining ip address from .....".
 
AP Detail-
AIR-AP1131AG-N-K9
c1130-k9w7-tar.124-10b.JA2
12.3(8)JEA

View 1 Replies View Related

No IP Address Can't Contact DHCP

Aug 1, 2011

I am running a Dell Inspiron 530 with Windows XP SP 3. My computer is displaying cannot aquire network address, can't contact dhcp. I have already had the modem and ethernet cables tested, they're fine, and I have tried replacing the network card, no luck. I have also run ip config renew and replace as well as ipconfig/all everything was zero. I checked the startup menu and all the appropriate network apps are marked started and automatic.

View 11 Replies View Related

Linksys Wireless Router :: EA2700 Unable To Access DHCP Reservations Link Under Connectivity / Local Network

Sep 7, 2012

I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?

View 8 Replies View Related

Unable To Contact DNS Yet Can Still Use Some Websites?

Jan 17, 2012

I have a rather specific and annoying problem with my router. every few days or so the internet will cut out. However, i am still able to use websites that i have been using already, so am able to check emails read articles etc, but am unable to do things like stream videos from youtube or play online games. I run network diagnostics (Windows 7) and receive the error: Your computer appears to be correctly configured, but the device or resource (samsung.msn.com) is not responding. I have already updated all my drivers and have completely reinstalled my router and checked all cables etc. This appears to be only to do with computers that are connected wirelessly, as the pc connected via ethernet seems to be unaffected,

I have both a netbook and a gaming pc connected wirelessly.
Netbook:
OS Version: Microsoft Windows 7 Starter, Service Pack 1, 32 bit
Processor: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, x64 Family 6 Model 28 Stepping 10

[Code].....

View 3 Replies View Related

DNS Server May Not Be Available - Contact Provider

Jun 6, 2012

I have a Time Warner modem/router. There are a ton of different devices constantly being connected/disconnected to our router - itouches, computers, smartphones etc.

The problem started with my otherwise super reliable HP g42 (i3) laptop. Nothing would solve the issue other than recovering it back a few days to when the issue wasn't happening. But then it would happen again after a few days. All other devices would connect without issue.

Time warner's technical troubleshooting consists of "unplug the router for 10 seconds and then plug it back in. Did that work?"

So now, my son gets his first computer and I bring it home last night. Also an HP (pavillion -i3). Same deal. At first, it connects fine and dandy. Then after about 2 hours it get the ol' "won't connect - diagnose the problem?" After diagnose, it says "DNS server may not be available.

Here's the thing: Both computers connect immediately and without issue to my smartphone wireless tether.

View 6 Replies View Related

Unable To Contact Website About My Purchases

Mar 5, 2011

I have tried to contact this site about purchases and I can not get them to return any emails. They have a contact us link on the page

View 3 Replies View Related

No Internet Access - Unable To Connect To DHCP Server

Aug 10, 2012

I can connect to the network but doesn't connect to the internet. I have tried a lot of ipconfig cmd's /renew said "unable to connect to dhcp server" and others didnt work all out of ideas.

View 14 Replies View Related

Cisco Wireless :: 871W Unable To Ping / Contact Another User On Same Subnet

Jul 28, 2012

I have an 871 set up at home with 2 VLANs, both of these vlans present a strange behavior where an user is unable to ping/contact another user on the same subnet, however if users are on different subnet it seems to work [code]
 
According to the troubleshooting that I have done, the issue seems to be with the broadcast traffic, ARP request/reply do not reach another host on the same subnet (wireless to wireless or wired to wireless) however if the wireless device iniciates the connection  to wired,  it works fine.
 
I have tried to enable proxy arp on the different VLANs and BVI and different combinations but no sucess in order to get traffic across 2 wireless devices on the same subnet or a connection that is iniciated for a wired client to a wireless one.
 
I tried enabling and disabling dot11 arp-cache but no luck.

View 2 Replies View Related

Limited Or No Connectivity XP SP2 / SP3?

Jul 23, 2012

I have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC

View 14 Replies View Related

XP With SP2 - Limited Or No Connectivity

Mar 17, 2011

i did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.

View 8 Replies View Related

Limited Or No Connectivity

Sep 3, 2011

my internet is not working on my PC (XP) however the wifi in my house is still on (i can use laptop with functioning internet). The internet status say's "limited or no connectivity" and shows a yellow triangle with an exclamation point in the middle.

View 19 Replies View Related

Hub To PC Limited Or No Connectivity

Sep 9, 2011

I manage a small office network IP's are generated via a rooter. I need to add a new pc to the network and here is where the problem starts.I have a cable from a HUB in that office which has a splitter 1 way goes to a PC the other is empty. At first i tried connecting the other PC from that splitter but i get the Limited or no Connectivity message on both PCs. If i connect only one of them to the splitter the connection works fine.Now i tried with a HUB, made a Crossover cable from the splitter to the HUB in the WAN port, same deal both PCs get Limited ot no Connectivity. THe strange thing is that if i connect only one via the HUB the same thing happens.I am really out of ideas, my only option left is to connect the PC from the main HUB which means allot of cable posing.

View 3 Replies View Related

Limited Or No Connectivity With ATT

Oct 3, 2011

When using an Ethernet cord, I have no problems connecting to the internet. Also, my iPhone and my Wii have no problems connecting (wirelessly). However, I can't get any laptops to connect to my wireless. I have tried three different laptops and get the same problem, that it can connect to the network but limited or no connectivity.

View 1 Replies View Related

Limited Or No Connectivity?

Aug 28, 2012

I have a spare computer I build. Its a FX-60 on some old asus 939 motherboard. I installed xp in it because I don't have any wireless network adapters that work with linux or Windows 7.I am using an old Linksys WUSB11 Ver 2.6. USB adapter.The computer does have connectivity if I plug in an ethernet cord from the router. Worked fine, fast, was able to install Sp3, etc.I can't get the wireless to work. I get excellent connection strength, but can't actually do anything with it.Since this is XP and I haven't messed around with XP network settings for years, I think I got a bit rusty and spoiled with Windows 7.

View 6 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 - Can't Contact AD Server Slow TACACS Auth Response

Sep 28, 2011

Running ACS 5.1 appliance, and am seeing slow repsonse on TACACS authentications due to the ACS trying to reach overseas AD servers and failing.  Is there any way to configure a /etc/host/ file locally on the ACS in order to force the appliance to use specific AD servers for authentication?  As I understand the process currently, the ACS appliance will query the top-level domain and get a list of all the AD servers in DNS.  In my case, this would include the AD servers overseas that we do not want to use.

View 1 Replies View Related

Cisco WAN :: 1841 - VOIP Phone Not Able To Contact Hosted Server On Internet

Mar 11, 2010

We have 2mbps leased line and have Cisco 1841 which is managed by our ISP. I have hooked up another 1841 (please find basic config below, it will get more complex lateron) Now when I connect my laptop I am able to browse Internet. But when I conect VOIP phone, it is not able to contact it's Hosted Server on Internet.
 
VOIP phone is Polycom SoundPoint 550 and I get URL call disabed message.  If I try netgear Firewall everything seems to work.that the voip provider needs following ports UDP Range 16384 - 32766, TCP 5060 & UDP 5060. But in my config all outbound traffic is allowed. [code]

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved