Linksys Access Point :: Limited Or No Connectivity To WAP11 While Using WEP?

Oct 27, 2010

Setting up my wifi network with an old BEFSR41 Router and WAP11 wireless access point. Have laptop with XP Pro that connects just fine without encryption but as soon as I try to use WEP I get the "Limited or no connectivity" error.  When prompted, I type in the same passphrase as the one I used for the WEP 128bit encryption while setting up the WAP11 for my network.

View 4 Replies


ADVERTISEMENT

Linksys Access Point :: Cannot Connect Verizon IPhone 4 To WAP11

Feb 22, 2011

Whenever I try to connect my iPhone 4 or iPod Touch 3rd Gen it says incorrect password.  I have confirmed that I am using the correct password and have also tried putting a $ before the password. 

View 2 Replies View Related

Linksys Access Point :: Cannot Access Configuration Page For WAP11 Access

Jun 12, 2007

Cannot access configuration page for WAP11 Access

View 9 Replies View Related

Linksys Access Point :: How To Reset WAP11 With No Reset Switch

Apr 16, 2013

I have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?

View 3 Replies View Related

Linksys Access Point :: WAP200 Cannot Hit Web Connectivity

May 31, 2011

Any issues with the WAP200 and web connectivity?  The internet stays up, but after awhile, any browser I use cannot hit the web.  Email, chat, and any other internet reliant apps are fine.Just web.

View 1 Replies View Related

Wireless Internet Access With Limited Or No Connectivity

Dec 7, 2011

wireless network connection connected but limited or no connectivity

View 1 Replies View Related

Dell Inspiron Has Limited Connectivity / No Internet Access

Oct 14, 2012

I am currently in Thailand and I have been using dozens of different wifi connections around Australia and South-east Asia without a problem for the last year. I moved into a new place yesterday and when I tried to connect, it has the little yellow triangle with an exclamation mark, over the wireless symbol on the taskbar. I tried the troubleshooter but it says turn the modem off an on, I don't think I can do this, I'll try and ask reception but I doubt they will let me.

No-one else at this place I am staying has had the same problem as me. The signal strength is "excellent", the wifi password is correct. I have windows 7 on a Dell Inspiron.

I am at my old place now, where the internet works. I downloaded the internet test thing from one of the stickies, I'll go and do that at my new place and post the results soon.

View 8 Replies View Related

Dell :: Inspiron 14z Connect To Wi-Fi Keep Getting No Access Or Limited Connectivity

Mar 3, 2013

I have a brand new Dell Ispiron 14z Ultrabook.  I keep having problems with Wi-Fi connectivity.  I can use the Ethernet connection fine, but when I try to connect to Wi-Fi I keep getting no access or limited connectivity.  I have other devices and laptops that work fine on the same Wi-Fi networks

View 3 Replies View Related

Acer Aspire 5310 Vista Laptop - Local Access / Limited Connectivity

Feb 7, 2011

I've just recently bought a second hand Acire laptop is v.good condition, it does everything fine apart from connect via wireless.I have another laptop which can connect on it's wireless and the Acer laptop can get a connection if you use a network cable directly to the router.I have a Sky phone & Broadband package.

Working Laptop (XP) -IP config All -
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>ipconfig /all

[code]....

View 8 Replies View Related

Linksys Wireless Card / Limited To No Connectivity / Cannot Repair

Dec 13, 2012

I have a computer that is running Windows XP and is using a Linksys wireless card and their connection software. (It's not my computer, and I can't recall the name of the software.) The computer can't connect to the internet, but it can connect to the wireless network. When you try to repair the connection you get back that the computer cannot refresh the IP address, and thus repair the connection.A few extra things, the owner seems to be under the impression that another computer has kicked him off and has somehow broken his connection due the fact that it is used for gaming. These problems occurred when said computer had no internet connection at all. (Wired or wireless, everything was unplugged.) I just would like some kind of verification of the fact that another computer, under general circumstances, can't break another's connection out of thin air. I have tried resetting card, routers, and some other things. I am working on trying other wireless receivers on the computer and a different router tomorrow. I will update when that is finished.

View 2 Replies View Related

Linksys Wired Router :: BEFSR41 V3 Limited Or No Connectivity

Feb 22, 2011

i have a BEFSR41 v3 firmware v 1.05.00 - i have been usuing it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.Then one day i started getting this weird ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems.
 
Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later the limited or no connectivity reappeared and the previous solutions did not work to fix it - after searching for a fix i discovered that i could simply unplug the router and the plug it back in and this would solve the problem. This solution worked many times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.
 
DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer reported The IP address lease 192.168.1.100 for the Network Card with network address0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Serversent a DHCPNACK message}.Now the even viewer just tells me it is using ip address 169.254.xxxxxx - (not the exact message but i didn't wanna go back and look)I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.I.ve tried ipconfig /release and ipconfig /renew - i've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - i've tried even tried different cables and switching ports on the router.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Limited Connectivity

Jul 10, 2011

I recently bought a WRT120N Linksys wireless-N Home router but i have major problems with it getting to work.

Everyday i turn my laptop on i get either the message "limited connectivity or it doesnt find the wireless network at all" Same for my girlfriends laptop. Strange thing is after i reboot the router by taking the power off the laptops connect and have no problems anymore. It is quite annoying to have to reboot the wireless all the time so i would like for it it to work properly.

Connected through cable are my xbox, mediacentre and deskptop who do not have any problems staying connected to the internet. It is only the wireless that is giving me troubles.

View 3 Replies View Related

Limited Access To Internet / But Have Access Point

Mar 12, 2012

I have a modem connected to a router wirelessly and an access point few computers have access to the internet and some has limited access even those close to the access point.

View 2 Replies View Related

Linksys Router Befsr41 V3 With Latest Firmware 1.05.00 - Limited Or No Connectivity?

Feb 25, 2011

I have a linksys router(befsr41 v3) with the latest firmware(1.05.00) - i have been using it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am on now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.

I started getting this ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems with the internet connection.Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.

Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.

This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer on computer #2 reported The IP address lease 192.168.1.100 for the Network Card with network address 0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Server sent a DHCPNACK message}.

Now the even viewer just tells me it is using ip address 169.254.xxxxxx

I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.
I tried uninstalling the NIC and removing the drivers, rebooting and then reinstalling them. No luck.

I tried setting a static ip on computer #2 with no luck. When i did these two error messages appeared in the event viewer of computer #1---

The master browser has received a server announcement from the computer (computer #2) that believes that it is the master browser for the domain on transport NetBT_Tcpip_{0876E9A8-C6E. The master browser is stopping or an election is being forced.

The name "MSHOME:1d" could not be registered on the Interface with IP address 192.168.1.100. The machine with the IP address 192.168.1.20 did not allow the name to be claimed by this machine.

If I ping the router from computer #2 it comes back 100% loss.

If I ping the NIC it comes back 0% loss.

I might also add that I can see both computer #1 and #2 in my home network workgroup on both computers. I've tried ipconfig /release and ipconfig /renew - I've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - I've tried resetting the ip stack with the netsh command - I've even tried different cables and switching ports on the router.

View 12 Replies View Related

Linksys Wireless Router :: E1500 Limited Connectivity To Network?

Aug 6, 2011

I have Vista Home on a laptop (all up to date) and when I try to set up wireless connection using a key it goes to 25% then times out. When I try to manually set up  a connection I get limited connectivity and no internet. I have one other laptop with Win 7 and this connected with no problems, also one desk top connected with no problems. Kept getting the error 82BD0119 on the Vista laptop.

View 5 Replies View Related

Limited Access And Yellow Triangle With Exclamation Point In Middle

Nov 19, 2012

My laptop, which is a gateway, not sure which type but it's relatively new. just a few years old maybe 5 at the max? idk tbh. Anyways when my mom first gave it to me it had an internet problem. Said limited connectivity and would not connect. Someone told me to restart the computer and the internet magically started working again. It didn't work this time.

View 4 Replies View Related

Linksys WRT120N Router - Unable To Connect With DHCP Limited Or No Connectivity

Feb 1, 2012

I'm seeing some weird behavior trying to connect my Windows XP SP3 desktop via a USB wireless to my Windows network via Linksys WRT120N Router. It is unable to connect with DHCP. "Limited or No Connectivity" is shown on the network icon and no internet connectivity is present. When i manually assign a static IP, i am able to get connectivity to browse the internet, and I am able to ping the other computers in my network, but I am unable to view the windows workgroup. I am able to manually map network drives, but those drop continually. There seems to be no rhyme or reason to the connectivity and the dropping while I am using the static IP. DHCP does not work at all. I'm just trying to get this computer connected to the windows workgroup so that I can map network drives and printers once and for all. Right now the rest of the network (ethernet cabled to router) works fine. I'm thinking it may be something in the routers wireless config, as I am having the same issues (DHCP not working at all, static IP working but constantly dropping) with a Mac laptop.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G V8 / Cannot Connect To Network / Limited Connectivity

Nov 13, 2009

I have been using this router fine for a year now.  Now I can only get on the internet if I am directly plugged into the modem.  It says I have limited connectivity.  My ISP is Comcast.  I have tried resetting the router with no luck.  I have tried to update the drivers but I cannot even log into 192.168.1.1.  I am in dire need of the wireless cpability.  When I go to the run command and type ipconfig it tells me I have no default gateway.

View 9 Replies View Related

Vista Dell Inspiron 1525 Laptop Connected To Linksys Router But Has Limited Connectivity?

Mar 4, 2013

I am having trouble with a Vista Dell Inspiron 1525 laptop that says it is connected to my Linksys router, but has limited connectivity. It's this way with both a wired and wireless connection. I have 4 other computers in the house that all connect with no problems. The Dell laptop connects in safe mode, but won't connect when in normal mode

View 1 Replies View Related

Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?

Nov 1, 2012

How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.

View 1 Replies View Related

Linksys Access Point :: WRT54G - Unable To Find Access Point In Home Network

Aug 29, 2009

I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1.  My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
 
I found directions in the forum for a setup using the LG BD390  but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold  from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
 
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi. 

View 3 Replies View Related

Linksys Access Point :: WAP54G Access Point Setup After A Reset?

Jul 9, 2006

I had to reset my access point but the login screen fails to appear to lock the router.  I don't have the setup wizard disk.

View 9 Replies View Related

Linksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point

Jan 17, 2013

I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?

View 1 Replies View Related

Linksys Access Point :: WRT320N Access Point Vs Range Extender

Dec 14, 2011

Have a WRT320N router at one end of the house in the basement.  Would like to boost signal to other end of the house.  Which product should i use, an access point or a range extender?  My house is also wired with Ethernet cable and I could plug the access point into an Ethernet port at the end of the house where the signal is weak.

View 1 Replies View Related

Linksys Access Point :: WAP4410n MIBs Or OIDs For Access Point

Jul 3, 2012

I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?

View 1 Replies View Related

Linksys Access Point :: WAP54G Access Point Unable To Connect To More Than One PC?

Apr 25, 2011

I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
 
 The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
 
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
 
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.

View 3 Replies View Related

Linksys Access Point :: Repeat WAP54G Access Point?

Aug 25, 2011

What I want to do is the opposite of most configurations. I live on a small island with only one DSL connection. The modem is wired connected to a WAP54G Access point. To extend this access point want to use a WRT54G. 

View 4 Replies View Related

Linksys Access Point :: WRT120N - Cannot Connect To An Access Point

May 10, 2013

I'm using a WRT120N and have had no problems connecting most wireless devices, but a Nintendo DS and DSi owned by my family are unable to connect to the access point. My wireless security mode is disabled, network mode is set to mixed, SSID is the same as on the DS/DSi, Channel width is 20Mhz only, Standard channel is set to 6, but I tried using channel 1 and 11 without success, SSID broadcast is enabled.
 
I've tried every work-about I could find and always get the 51300 error code, and am at a loss as to what else I can try to get the devices to connect to the access point.

View 1 Replies View Related

Linksys Access Point :: Configure WRT120n As An Access Point?

May 1, 2012

Is it possible to configure WRT120n as an access point?

View 1 Replies View Related

Linksys Access Point :: E3000 Configuration As Access Point?

Apr 6, 2011

I have 3 E3000 Routers and would quality input regarding using 1 of the E3000 Routers connected to my Broadband Modem (Roadrunner) and would like to know how to configure the remaining 2 E3000 Routers to be hardwired to my main Router as Access Points located approximate segmented 1/3rd areas throughout my house which really is only 1800 Sq.Ft. in area. How to be configure these routers as access points as well as configuring the main router that will be connected to my broadband router. This is my first network to utilize streaming video, Internet Television Programs, Internet Radio, Accessing the Internet in all rooms of my house and outside the immediate adjacent patio area.

View 1 Replies View Related

Linksys Access Point :: Way To Find Mib For WAP54G Access Point?

Feb 10, 2012

I have tried to find mib for my Linksys WAP54G acces point  without succeed. Any body know how I could find it?? I want to program a software based on SNMP protocol. Is there some databses for mibs?

View 1 Replies View Related

Limited Or No Connectivity XP SP2 / SP3?

Jul 23, 2012

I have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC

View 14 Replies View Related

XP With SP2 - Limited Or No Connectivity

Mar 17, 2011

i did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved