Linksys Cable / DSL :: MTNL ADSL Frequent Disconnection WAG120N

Apr 14, 2013

I'm using WAG120N, but suddenly Days back I am experiencing frequent disconnection after every 1-2minutes. After extensive Complains to my ISP (MTNL) they were unable to rectify the problem.Attaching the System Log of WAG120N. [code]

View 9 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG120N Frequent Disconnection On MTNL INDIA ADSL

Dec 1, 2012

I recently purchase WAG120N on a recommendation from a cisco personal, after my long year work horse Linksys AG 241 went kaput.Since I have purchased it WAG120N it is never stabilized on the MTNL ADSL network. There is too much of frequent disconnection. Although I have raised this issue with cisco support # 121128-000336 and 121122-004290, but all they have asked me to replace the WAG120N gateway. [code]

View 1 Replies View Related

Linksys Cable / DSL :: ADSL Sync With WAG120N

Aug 23, 2011

After the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Double ADSL Connections On One PC?

Jul 11, 2012

I only have access to rather slow connections (256 Kbps). But since I have two lines and two modems, I was wondering if I could bond them together and make a faster one. My main modem is a Lynksys WAG120N Wireless-N ADSL2+ Modem Router, which as you can see is also in charge of both wired and wireless networks at my place. The second one is an older D-Link ADSL modem (JUST modem).Since I have an extra LAN port on my Lynksys modem, I want to know if and how I can connect the second modem, and combine the two rates.

View 2 Replies View Related

Linksys Cable / DSL :: Share 3G Connection Over WAG120n ADSL Router?

Jun 1, 2011

I have a 3G USB modem connected to my desktop and I would like to share the internet connection to other devices wirelessly using the WAG120n ADSL router. How do I set up the IP's manually on the router and my PC to do this? And which other setting do I need to set?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Started Dropping ADSL Connection?

Jul 6, 2012

Recently, i bought a LinkSys WAG120N ANNEX-A to replace my old speedstrem4200. Well everything was fine, but after 2 days of it installed, it started to drop my ADSL connection.
 
Sometimes, it remain connected for 4-5 hours, then drop, or sometimes, it drop every 30min-1hour.I tried upgrading the firmware to 1.00.16, but no luck, it still drop the connection.I have 3 computer plugged to the router via cable(wired) plus 1 netbook(wireless) and 1 ipod (wireless).Sometimes, when 1 computer is turned off, it seem to make the ADSL connection drop when the LAN light turn off. I noticed everytime it drop the ADSL connection, in the logs, i get this:
 
Mon, 2010-11-08 22:24:57 - Terminating on signal 15. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Couldn't increase MTU to 1500. Mon, 2010-11-08 22:24:57 - Couldn't increase MRU to 1500 Mon, 2010-11-08 22:24:57 - LCP down. Mon, 2010-11-08 22:24:58 - Modem hangup Mon, 2010-11-08 22:24:58 - Connection terminated. Mon, 2010-11-08 22:24:58 - Connect time 215.0 minutes. Mon, 2010-11-08 22:24:58 - Sent 50496235 bytes, received 212267122 bytes. Mon, 2010-11-08 22:24:58 - Enter: tdb_store. Mon, 2010-11-08 22:24:58 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:58 - Enter: tdb_update. Mon, 2010-11-08 22:24:58 - Doing disconnect Mon, 2010-11-08 22:24:58 - Exit.
 
I tried changing the MTU settings in the router to 1492 (my ISP default) but didnt work.
 
Tried changing the MTU to 1492 on every computer and still got the same problem.For now im using the WAG120N in bridge mode, and still using my old speedstream4200 as ADSL modem.

View 5 Replies View Related

Linksys Cable / DSL :: Cisco X2000 / WAG120N - ADSL Bridge

Sep 25, 2012

I've got Cisco X2000 and WAG120N. Is it possible to use one of those as a kind of a 'ADSL bridge' on to connected Sonic wall firewall ? How I picture it is that adsl connection is terminating on one of above Cisco boxes, which is connected via Ethernet or wan port to sonic wall, and it's only passing the adsl connection on to sonic wall which in result will end up with my ISP assigned IP address ?

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH Frequent Disconnection With DSL Modem

Jul 9, 2011

I purchased WRT54GH wireless router back in 2009 and it was working fine except for past 1 month, wherein the Internet Connection was being disrupted 15 - 20 times in an hour. I thought it could be fault from ISP end; however after investigation by ISP we found the fault was not from ISP as, when Wireless was unable to establish connection with the DSL Modem it was failing but when tried to connect laptop with the DSL Modem it worked fine (Wired connection). I did try the Settings mentioned in an earlier post to change the UPnP and the Beacon Interval etc. This however doesnot seem to work as the internet has been disconnected almost thrice since then. (Approx. 15 - 20 mins). When the router is unable to connect to internet I restart the Wireless Router and the DSL Modem. After restarting, the Internet connectivity works fine.
 
Below are the Advanced Wireless Settings from Wireless Tab:
 
Authentication Type: Auto Shared (Default: Auto)
Basic Rate: Default (Default: Default)
Transmission Rate Auto (Default: Auto)
CTS Protection Mode: Disabled Auto (Default: Auto)
--------------------------------------------------------------------------------
Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval: (Default: 1, Range: 1 ~ 255)
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)
RTS Threshold: (Default: 2347, Range: 0 ~ 2347)

View 2 Replies View Related

Frequent Disconnection Of Internet - Cannot Open Webpages

Mar 16, 2011

I have moved into an apartment with 4 friends of mine. We all own HP 6515b Laptop running Windows 7. We connect to the internet through a wireless router. Our connection's name is LINKSYS and is WEP.Once i have connected to the internet, it will continue to work fine for a while. After some random time, it will disconnect.(The computer stays connected to the wireless modem, but computer shows NO INTERNET CONNECTIVITY (in bottom-right taskbar))Then in 5-6 seconds, it will start working again... The only change that is visible is that the exclamation mark on network disappears. The computer remains connected to router for this whole time. Initially we thought it was a problem of our ISP. But later we found out that at a time not all users face disconnection.So at a particular time, it is possible that only I cannot open webpages.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N And PPP Disconnection?

Jan 21, 2013

I've a 20Mbit/s connection with Telecom Italia provider.My line values follows:-- DSL Information ---DSL Driver Version: AnnexA version - A2pB023k.d21dDSL VPI/VCI: 8/35DSL Status: ShowtimeDSL Mode: ADSL2+DSL Channel:DSL Upstream Rate: 979 KbpsDSL Downstream Rate: 22105 Kbps Down upDSL Noise Margin: 12.0 dB 13.4 dBDSL Attenuation: 10.5 dB 4.3 dBDSL Transmit Power: 14.0 dBm 12.4 dBm?I have issues about connection stability : on HEAVY load download the PPP connection goes down. The sync signal stays up, but the PPP goes down!
 
In the log these lines corresponds:
 
Sun, 2013-01-20 23:29:29 - No response to 3 echo-requests
Sun, 2013-01-20 23:29:29 - Serial link appears to be disconnected.
Sun, 2013-01-20 23:29:29 - Enter: tdb_store.
Sun, 2013-01-20 23:29:29 - tdb_store: calling tdb_update.
Sun, 2013-01-20 23:29:29 - Enter: tdb_update.

[code]....
 
My ISP says that there are no troubles with the line and it can be an issue of the modem...

View 8 Replies View Related

Cisco Wireless :: 5508 - Frequent Wireless Connection And Disconnection

Oct 2, 2011

I am running 5508 controller with version 7.0 and 1142N access points.. I am facing a problem on user connectivity.
Wireless Users are getting frequent connection and disconnection. These users are not getting connected to the access point nearby although this access point is up and running. I have tried reducing the power level, configured the AP after resetting it.

View 2 Replies View Related

Linksys Cable / DSL :: Disable WPS On WAG120N?

Aug 24, 2012

Is there any way to disable WPS feature on my WAG120?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Install

Mar 31, 2011

Just bought this WAG120N and using the CD Setup it gets as far as Install Gateway then displays its not connected properly. Checked everything it says to check.Im swapping from an ordinary adsl modem but i unplugged all of that and the WAG120N shows steady Power , 1 ethernet number lit and flashing ok,  Wireless is lit and DSL is also also lit.   Rebooted a few times too.

View 1 Replies View Related

Linksys Cable / DSL :: How To Set Up WAG120N As A Router Only

Jul 20, 2011

How do I set up the WAG120N as a router only as I no longer want to use it as modem and router?I want to connect the WAG120N thru a cable to a modem that will make the internet connection and use the WAG120N as a wireless router only.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N - Want Public IP On PC

Apr 19, 2012

I have a WAG120N modem-router.What i want is to have my public IP on my pc.So... just 1 pc with 1 ip... but whatever i do... nothing works.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Can't Login To It And Its Quite Hot

Mar 27, 2011

I've got a new WAG120N which seems to lock up about every 24 hours. All the lights are on except the wireless light goes out. Can't login to it and its quite hot.

View 3 Replies View Related

Linksys Cable / DSL :: Connecting Laptop To WAG120N?

Jul 22, 2011

problems when I wanted to connect my laptop to my WAG120Nrouter for the first time.First the wireless adapter on my windows xp gives me the error "unable to verify your identity"second when i passed the security verification by bypassing the security options on the connection properties of the adapter, windows tries to acquiring network address and continues it for hours. Seems Windows cannot get any ip address from the router.The router works fine with wired Ethernet devices and my iPhone when i connect it wirelessly.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Ports Won't Open?

May 14, 2012

normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
 
if i do  hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
 
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model :  WAG120N

View 1 Replies View Related

Linksys Cable / DSL :: Configure WAG120N As Bridge?

Jan 31, 2012

I need to configure a WAG 120 N  as a bridge, so I can have my public IP as an output of an Ethernet port. I need this configuration because I have a non ADSL router managing VPNs and needs the public IP on the WAN port of this router.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Airprint To HP Printer

Jan 24, 2011

My WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer.  When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print.  Enable the Linksys router and the printer is no longer found on the ipad.  other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?

View 3 Replies View Related

Linksys Cable / DSL :: Slow Internet On New WAG120N

Oct 24, 2010

I have a WAG120N which runs speedtest.net at 0.1 Mbs. My old router used to get 6 Mbs.I have tried a firmware update & reset, reduced the MTU to 1300 but still no different.Windows Vista & 7 - two different computers, same speed...

View 6 Replies View Related

Linksys Cable / DSL :: Port 80 Does Not Work On DMZ With WAG120N

Nov 22, 2011

I configured my router Linksys WAG120N as DMZ, but  not forward port 80, only port 80.

View 1 Replies View Related

Linksys Cable / DSL :: No N Network Connection With WAG120N?

Mar 22, 2011

when choosing "Mixed" or "N-only" as Network Mode on the Basic Wireless Settings configuration page, the mode resets to "B/G-Mixed" or "G-only" respectively when saving. In other words, it is not possible to use the N network mode.

View 4 Replies View Related

Linksys Cable / DSL :: WAG120N Keeps Disconnected From Internet

Apr 18, 2010

I am using WAG120N, and it keeps disconnected from internet randomly, normally between 5-10 minutes. The thing is, when it is disconnected, the adsl lamp is still on, so I think that it is not the network problem. When internet lamp turns off , I try to turn off the device (or unplug the phone cable), then turn it on again (or re-plug the cable), and it will work for certain minutes, then gets disconnected again. I already upgraded the firmware to v 1.00.12. 

View 4 Replies View Related

Linksys Cable / DSL :: How To Configure WAG120N As A Modem

Apr 18, 2013

I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500

View 2 Replies View Related

Linksys Cable / DSL :: WAG120N Red Power Light

Apr 4, 2012

My WAG120N power light is always red whenever plugged in. I can't access the configuration page. My adapter works fine and the Reset button doesn't work. I can't find any troubleshoot for the "red power light" problem in user manual !

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N No Access To Setup

Oct 3, 2011

1) I dis abled the DHCP services on modem router as i was connecting it to a belkin router and after that i cannot accesss the setup of the WAG 120N.
 
2)If I acces the WAG120N by Lan the internet works fine but if i acces through wirless it does not.
 
3)Also when ever i connect the LAN cable from BELKIN router to WAG 120N the wirless services stop as well on the BElkin router and i cant figure it out why.

View 1 Replies View Related

Linksys Cable / DSL :: Bridge Mode On WAG120N

Apr 24, 2013

I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to 10.10.1.1 and I want my router on 10.10.1.2What bridge mode do I set on my wag? Do I need a crossover cable?

View 1 Replies View Related

Linksys Cable / DSL :: Does WAG120N Support IPv6

Dec 16, 2011

Does WAG120N Support IPv6 ?

View 1 Replies View Related

Linksys Cable / DSL :: Wag120n Can't See Other Connected Computers

Jul 1, 2011

I have multiple macs and when all of them are connected to the wag120n router, macs can't seem to find/see each other as if they are connected to different networks. I have tried another router ie. netgear dg834g router and this problem didn't occur and i am able to connect over the network without a problem. Obviously there is something wrong with the router settings.

View 2 Replies View Related

Linksys Cable / DSL :: Use Two WAG120N As Roaming WLAN?

Jan 31, 2011

We have a customer who has a WAG120N as their broadband wireless router, and we've sold them some new equipment, part of which is another WAG120N as our salesperson didn't realise they had one.They have a section of the building which the current WAG120N will not reach. Reading around this forum, it seems that I can give the second WAG120N a different static IP on the LAN and use it to expand the range of the WLAN.If I've read correctly, I need to make all the wireless stuff exactly the same except to use different wireless channels on each router. But what do I do with the DHCP server on the second WAG? Is it fair to say that the clients won't suddenly jump to a different IP because they won't have a cause to request a new one? I read one comment that suggested the second should be configured for DHCP relay, and another which contradicted this. Presumably I just don't configure the ADSL on the second WAG as that will only connect to the LAN.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Working With A Repeater?

Apr 5, 2013

what do i need to setup in WAG120N to work with a Wireless Network repeater?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Keeps Disconnecting Every 40 Minutes

Dec 26, 2012

Ok so for about a week now I have a problem with router. Today I checked log of router and found sometging like this:
 
Wed, 2012-12-26 15:41:15 - No response to 3 echo-requestsWed, 2012-12-26 15:41:15 - Serial link appears to be disconnected.Wed, 2012-12-26 15:41:15 - Enter: tdb_store.Wed, 2012-12-26 15:41:15 - tdb_store: calling tdb_update.Wed, 2012-12-26

[Code].....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved