Linksys Cable / DSL :: WAG120N Internet Starts Downloading Instead Of Showing Page

Aug 7, 2012

Have problem with both of my wag120n routers. I setup remote access, from the intranet it works fine. But from internet instead of showing me the page it starts downloading it.  Instead of home page trying to save ¨download¨, if i put a long link like xxx.com/setup.cgi?=etc  then it tryes to save ¨setup.cgi¨. All fileas are empty, 7kbytes.

View 7 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG120N Empty Admin Page?

Dec 14, 2010

I have this problem since updating my firmware from 1.00.12 to 1.0016 (Annex A)
 
Problem: After leaving the router on for 1 day(dont know exactly how many hours), I tried logging in again on the admin page 192.168.1.1. Auth box appears, put username & password, but blank page after that. Tried using Safari/Firefox and it's the same. Router is working, all the LED lights are good, Internet is working, DHCP and all other config is normal. It's just that I can't access the admin page anymore.
 
When I power on/off the device, the problem is gone. Admin page is accessible again. But after some number of hours again, same problem blank admin page.
 
Does it has something to do with the router config like g.dmt/dsl 2 ? 

View 9 Replies View Related

Linksys Cable / DSL :: Slow Internet On New WAG120N

Oct 24, 2010

I have a WAG120N which runs speedtest.net at 0.1 Mbs. My old router used to get 6 Mbs.I have tried a firmware update & reset, reduced the MTU to 1300 but still no different.Windows Vista & 7 - two different computers, same speed...

View 6 Replies View Related

Linksys Cable / DSL :: WAG120N Keeps Disconnected From Internet

Apr 18, 2010

I am using WAG120N, and it keeps disconnected from internet randomly, normally between 5-10 minutes. The thing is, when it is disconnected, the adsl lamp is still on, so I think that it is not the network problem. When internet lamp turns off , I try to turn off the device (or unplug the phone cable), then turn it on again (or re-plug the cable), and it will work for certain minutes, then gets disconnected again. I already upgraded the firmware to v 1.00.12. 

View 4 Replies View Related

Linksys Cable / DSL :: WAG120n Cannot Connect To Internet

Nov 29, 2012

I recently got a Linksys WAG120n wireless modem but I have a problem with its Wireless.whenever I want to connect to the wireless of the modem I have to reboot the modem. or I cannot connect to it or if I connect I do not have internet access the cable LAN interface of the modem is working is working properly.I used Mixed (b/g/n) as network mode and wpa2/psk as authentication mode with using preshared key.and the channel is 11. no matter if I enable MAC filtering for wireless or not it is just the same.my laptop is a HP G42 with a Ralink 3090 wireless card and I have installed the latest manufacturer driver of the wireless Card.but it is not working .even sometimes laptop cannot find the linksys modem until I reboot the modem.as I have found there is no newer firmwire on cisco site for this modem to upgrade.

View 1 Replies View Related

Linksys Cable / DSL :: Disconnecting From Internet - Wag120n

Mar 18, 2013

I have a wag120n ADSL modem. When I turn on the modem, after about 30 min to 1 hour DSL LED light flashing and then internet LED light turn off, and disconnect from internet. And modem does not connecting to internet until I turn off and turn on again the modem. I check with other modem it is working fine and DSL line is not the problem. Also I installed the latest firmware and that not solved the problem.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N / DIR 600 - Internet Connection Failure

Mar 23, 2012

I will just explain my setup:
 
I have a ADSL Huwavi modem by my ISP installed at my place.. Now the wireless from that device is very bad.. So I purchased WAG120N to setup a daisy-chain kind of setup in my other bedroom. I also put another D-link DIR-600 in between to give a connection to the first floor (via Ethernet cable).
 
So my huwavi is the ISP device, then a LAN from it goes to the dlink internet (WAN) port. then one cable from the d-link LAN port to the LAN1 of WAG120N and another upstairs.
 
Now all of this was working perfectly.. I put same SSIDs and Pwds on both ISP router and WAG120N and i was getting seamless net..
 
Now yesterday we removed the ISP modem to do some shifting.. Upon reconnecting, the ISP modem, Dlink work as before, but the WAG120N refuses to connect to the net.. it shows DSL down and doesn't access the www.
 
What I felt is that since i changed LAN ports on my ISP device and dlink, the static IP settings on the WAG120N should be changed.. i modified it, set to to point to the dlink for internet and huwavie for DHCP.. yet nothings happening..
 
I even connected the WAG120N directly to the Huwavie, yet it fails to connect to the net..

View 1 Replies View Related

Linksys Cable / DSL :: CISCO WAG120N - How To Access Internet Through Firewall

Dec 12, 2011

Recently I shifted to ADSL2+ Internet broadband.So purchased  "CISCO Linksys WAG120N" router as my firewall hardware( FortiGate60) had no any port to connect to ADSL.Now I'm accessing internet throug the above Linksys router and do not use the firewall as I don't know how to configure the firewall to get the internet access through firewall from the router.My earlier broadband service was directly connected to the firewall's WAN port as it was compatible.configure the firewall to access the internet from the router through the firewall.

View 2 Replies View Related

Linksys Cable / DSL :: Wag120n Internet Speed Drops With Time

Aug 10, 2012

I am using linksys cisco wag120n adsl2 modem router.When I start the router the internet speed seems great but after some time the speed drops miserably. When I again restart the router the speed seems great for few mins but again drops after sometime.It happens in both LAN and wireless mode.The firmware version of the router is 1.00.16
 
I was going through the problems posted by some other user but observed that cisco people are not heraing to them.Seems made a mistake by associating with cisco product.This is the worst router I have ever used.The wireless also gets disconnected abruptly.Next time I'll avoid cisco.Cisco is all about stone age products and zero customer care.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Drops Internet Connection When PC Wakes Up

Aug 15, 2011

From time to time, when I wake up an specific station from sleep mode, the router loses its connection with Internet. It still has the line synced, but there is no Internet connection.I still can access the router through browser though. If I hit "connect" to establish a manual connection, it does not work. I have to switch the router off and on and wait for the whole process of syncing and connection, then I have Internet again.
 
I thought this could be something on that PC (old XP) sending some weird packet to router when I wake it up, but I tried with a newer PC (Win 7 64 bits) and the same problem persists. Also, this only happens when I wake up the PC. If it is off and I turn on, or if I restart, the problem does not happen.
 
The router (WAG120N) has an old firmware version (V1.00.12) because the latest available is buggy and had some problem with my ISP (limiting the bandwidth). However, I have this firmware for like 6 months and the problem only started 2 months ago.

View 4 Replies View Related

Linksys Cable / DSL :: WAG120N No Internet Connection / DSL Light Keeps Blinking

Aug 28, 2012

Yesterday I bought the  Linksys Wireless-N Home ADSL2+ Modem Router WAG120N (Annex-A version). I configured the modem/router and it was working very well. Today I was surfing the internet just fine and I left my computer for a few minutes, when I came back I noticed that there is no internet connection. The internet light on the modem was no longer on, and the DSL one was blinking. I turned off the device and then turned it back on but the issue was still present. I tried restoring the factory default settings and configuring the modem again but nothing seems to work (resetting the modem, turning off every device connected to it and restarting the modem/router). The DSL light keeps blinking, turns off for a couple seconds and then starts blinking again. The internet light only appears when I restart the modem and it flashes red just after turning the device on.

View 8 Replies View Related

Linksys Cable / DSL :: WAG120N Internet Sharing For Specific Clients

Nov 23, 2011

is it possible to moderate sharing bandwitch or/and traffic internet over wireless via WAG120N for some specific client? is there any configuration inside modem OS?without any external software such as Cyberoam or... that they need Always-On PC to work!

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N - IPad And IPhone Access To Internet

Dec 26, 2010

I have local WI-Fi network with 2 Macs, 2 PC's, iPhone, iPod and i Pad at home on Link sys WAG120N router. On i Pad when I try to connect to Internet I have to turn WiFi off and on. It works for a while but after waking i Pad from sleep I have to switch off and on again. It really drives me crazy. Sometimes (hardly ever) it happens on my iPhone 4 (same network setup as on i Pad). Other devices connect to Internet whenever I need.

View 9 Replies View Related

Linksys Cable / DSL :: Disable WPS On WAG120N?

Aug 24, 2012

Is there any way to disable WPS feature on my WAG120?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Install

Mar 31, 2011

Just bought this WAG120N and using the CD Setup it gets as far as Install Gateway then displays its not connected properly. Checked everything it says to check.Im swapping from an ordinary adsl modem but i unplugged all of that and the WAG120N shows steady Power , 1 ethernet number lit and flashing ok,  Wireless is lit and DSL is also also lit.   Rebooted a few times too.

View 1 Replies View Related

Linksys Cable / DSL :: How To Set Up WAG120N As A Router Only

Jul 20, 2011

How do I set up the WAG120N as a router only as I no longer want to use it as modem and router?I want to connect the WAG120N thru a cable to a modem that will make the internet connection and use the WAG120N as a wireless router only.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N - Want Public IP On PC

Apr 19, 2012

I have a WAG120N modem-router.What i want is to have my public IP on my pc.So... just 1 pc with 1 ip... but whatever i do... nothing works.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Can't Login To It And Its Quite Hot

Mar 27, 2011

I've got a new WAG120N which seems to lock up about every 24 hours. All the lights are on except the wireless light goes out. Can't login to it and its quite hot.

View 3 Replies View Related

Linksys Cable / DSL :: Connecting Laptop To WAG120N?

Jul 22, 2011

problems when I wanted to connect my laptop to my WAG120Nrouter for the first time.First the wireless adapter on my windows xp gives me the error "unable to verify your identity"second when i passed the security verification by bypassing the security options on the connection properties of the adapter, windows tries to acquiring network address and continues it for hours. Seems Windows cannot get any ip address from the router.The router works fine with wired Ethernet devices and my iPhone when i connect it wirelessly.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N - Ports Won't Open?

May 14, 2012

normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
 
if i do  hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
 
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model :  WAG120N

View 1 Replies View Related

Linksys Cable / DSL :: Configure WAG120N As Bridge?

Jan 31, 2012

I need to configure a WAG 120 N  as a bridge, so I can have my public IP as an output of an Ethernet port. I need this configuration because I have a non ADSL router managing VPNs and needs the public IP on the WAN port of this router.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Airprint To HP Printer

Jan 24, 2011

My WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer.  When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print.  Enable the Linksys router and the printer is no longer found on the ipad.  other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?

View 3 Replies View Related

Linksys Cable / DSL :: Port 80 Does Not Work On DMZ With WAG120N

Nov 22, 2011

I configured my router Linksys WAG120N as DMZ, but  not forward port 80, only port 80.

View 1 Replies View Related

Linksys Cable / DSL :: No N Network Connection With WAG120N?

Mar 22, 2011

when choosing "Mixed" or "N-only" as Network Mode on the Basic Wireless Settings configuration page, the mode resets to "B/G-Mixed" or "G-only" respectively when saving. In other words, it is not possible to use the N network mode.

View 4 Replies View Related

Linksys Cable / DSL :: How To Configure WAG120N As A Modem

Apr 18, 2013

I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500

View 2 Replies View Related

Linksys Cable / DSL :: WAG120N Red Power Light

Apr 4, 2012

My WAG120N power light is always red whenever plugged in. I can't access the configuration page. My adapter works fine and the Reset button doesn't work. I can't find any troubleshoot for the "red power light" problem in user manual !

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N No Access To Setup

Oct 3, 2011

1) I dis abled the DHCP services on modem router as i was connecting it to a belkin router and after that i cannot accesss the setup of the WAG 120N.
 
2)If I acces the WAG120N by Lan the internet works fine but if i acces through wirless it does not.
 
3)Also when ever i connect the LAN cable from BELKIN router to WAG 120N the wirless services stop as well on the BElkin router and i cant figure it out why.

View 1 Replies View Related

Linksys Cable / DSL :: Bridge Mode On WAG120N

Apr 24, 2013

I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to 10.10.1.1 and I want my router on 10.10.1.2What bridge mode do I set on my wag? Do I need a crossover cable?

View 1 Replies View Related

Linksys Cable / DSL :: ADSL Sync With WAG120N

Aug 23, 2011

After the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.

View 1 Replies View Related

Linksys Cable / DSL :: Does WAG120N Support IPv6

Dec 16, 2011

Does WAG120N Support IPv6 ?

View 1 Replies View Related

Linksys Cable / DSL :: Wag120n Can't See Other Connected Computers

Jul 1, 2011

I have multiple macs and when all of them are connected to the wag120n router, macs can't seem to find/see each other as if they are connected to different networks. I have tried another router ie. netgear dg834g router and this problem didn't occur and i am able to connect over the network without a problem. Obviously there is something wrong with the router settings.

View 2 Replies View Related

Linksys Cable / DSL :: Use Two WAG120N As Roaming WLAN?

Jan 31, 2011

We have a customer who has a WAG120N as their broadband wireless router, and we've sold them some new equipment, part of which is another WAG120N as our salesperson didn't realise they had one.They have a section of the building which the current WAG120N will not reach. Reading around this forum, it seems that I can give the second WAG120N a different static IP on the LAN and use it to expand the range of the WLAN.If I've read correctly, I need to make all the wireless stuff exactly the same except to use different wireless channels on each router. But what do I do with the DHCP server on the second WAG? Is it fair to say that the clients won't suddenly jump to a different IP because they won't have a cause to request a new one? I read one comment that suggested the second should be configured for DHCP relay, and another which contradicted this. Presumably I just don't configure the ADSL on the second WAG as that will only connect to the LAN.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N Working With A Repeater?

Apr 5, 2013

what do i need to setup in WAG120N to work with a Wireless Network repeater?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved