Linksys Cable / DSL :: WAG120N Constantly Disconnecting / How To Stop It
Jul 7, 2012
I got my WAG120N like 5 months back. Last night it started to disconnect randomly like at 5 - 10minute intervals.... The connection to the internet connects and then disconnects within 5 seconds. I've tried resetting, firmware upgrading, restoring settings and all that with no success. (I'm referring to the wired connection used for my PC and not WiFi)
Here is a copy of the log
Sat, 2000-01-01 05:06:57 - Adsl is connected
Sat, 2000-01-01 05:07:03 - Initialize LCP.
Sat, 2000-01-01 05:07:03 - Plugin pppoe loaded.
Sat, 2000-01-01 05:07:03 - PPPoE Plugin Initialized
Sat, 2000-01-01 05:07:03 - Plugin pppoe called.
[code]....
View 5 Replies
ADVERTISEMENT
Dec 26, 2012
Ok so for about a week now I have a problem with router. Today I checked log of router and found sometging like this:
Wed, 2012-12-26 15:41:15 - No response to 3 echo-requestsWed, 2012-12-26 15:41:15 - Serial link appears to be disconnected.Wed, 2012-12-26 15:41:15 - Enter: tdb_store.Wed, 2012-12-26 15:41:15 - tdb_store: calling tdb_update.Wed, 2012-12-26
[Code].....
View 3 Replies
View Related
Mar 18, 2013
I have a wag120n ADSL modem. When I turn on the modem, after about 30 min to 1 hour DSL LED light flashing and then internet LED light turn off, and disconnect from internet. And modem does not connecting to internet until I turn off and turn on again the modem. I check with other modem it is working fine and DSL line is not the problem. Also I installed the latest firmware and that not solved the problem.
View 1 Replies
View Related
May 17, 2012
For the past few months my cable modem has been rebooting (Power light stays on the rest turn off). I have replaced the modem and have had two technicians out here to no avail. The resets happen often during heavy use.The only errors that seem to happen frequently while this occurs are..
5/17/2012 20:33120207004Configuration File CVC Validation Failure
5/17/2012 21:54200005003Started Unicast Maintenance Ranging - No Response received - T3 time-out
5/17/2012 21:54200006003Unicast Maintenance Ranging attempted - No response - Retries exhausted
5/17/2012 21:54180002003UCD invalid or channel unusable
5/17/2012 21:54140206003DCC aborted unable to communicate on new upstream channel
[code]...
View 1 Replies
View Related
Jul 18, 2012
So just a few days ago my router has started to just constantly disconnect and reconnect itself to my computer. It is a wireless connection, and it will disconnect and reconnect for a short amount if time within just a few minutes. Ive tried power cycling my router and modem but the problem still persists
View 9 Replies
View Related
Dec 31, 2012
The network is constantly disconnecting from my devices and wont let me reconnect...I reset the network completely back to factory settings and started from there. Some of my devices didnt want to connect at all after the complete reset.These are the settings that I have changed: SSID has been changed,wifi security(wpa2 personal,AES) ,channel(width=20, channel=auto) ,DNS server(changed to Norton DNS: 198.153.192.40 & 198.153.194.40) & router management logon password & firmware upgrade to 3.0.03...
Router:Linksys WRT160N V1
Firmware:3.0.03
View 9 Replies
View Related
Oct 7, 2011
I have been using this for over a year with no problems and a couple of days ago, it started disconnecting and reconnecting constantly. I went and updated the firmware for it, but still the same problem.
View 6 Replies
View Related
Aug 24, 2012
Is there any way to disable WPS feature on my WAG120?
View 1 Replies
View Related
Mar 31, 2011
Just bought this WAG120N and using the CD Setup it gets as far as Install Gateway then displays its not connected properly. Checked everything it says to check.Im swapping from an ordinary adsl modem but i unplugged all of that and the WAG120N shows steady Power , 1 ethernet number lit and flashing ok, Wireless is lit and DSL is also also lit. Rebooted a few times too.
View 1 Replies
View Related
Jul 20, 2011
How do I set up the WAG120N as a router only as I no longer want to use it as modem and router?I want to connect the WAG120N thru a cable to a modem that will make the internet connection and use the WAG120N as a wireless router only.
View 3 Replies
View Related
Apr 19, 2012
I have a WAG120N modem-router.What i want is to have my public IP on my pc.So... just 1 pc with 1 ip... but whatever i do... nothing works.
View 1 Replies
View Related
Mar 27, 2011
I've got a new WAG120N which seems to lock up about every 24 hours. All the lights are on except the wireless light goes out. Can't login to it and its quite hot.
View 3 Replies
View Related
Jul 4, 2012
I am connected to the router with a cable , a router which my internet provider supplied me with.The problem used to happen before , occasionally , but the disconnecting has drastically increased lately , and these days it has become unbearable , it occurs at least once every hour , especially when i'm playing a game online or so.The disconnects last very shortly , or until i reset my router or disable/enable my network in network connections.I have 2 more laptops in the house , connected via wireless , and they've had no issues with this.The first time these problems occurred i was able to fix it just by doing the windows troubleshoot, which lead to an error saying "Default gateway is not available".I found a lot of threads on the internet regarding this issue , and tried all of them but none seemed to work.
I tried downloading newest drivers from my motherboard site first , then from Realtek's site, then deleting old drivers via DriverSweeper aswell , just in case , but it did nothing.I tried changing the Speed & Duplex to 100mbp/s Full Duplex , which has solved the issue for some , but again it did nothing.I called my internet provider , was told to use static IP address and type it in manually and if it didn't work to try plugging the cable into another slot on the router ,And after all those things , i feel like the problems is even bigger now. I now no longer get the "Default gateway is not available" error , and the only solution is to reset router or disable/enable network , which leads to the network being "unidentified" for some time before it connects.
View 9 Replies
View Related
Jul 22, 2011
problems when I wanted to connect my laptop to my WAG120Nrouter for the first time.First the wireless adapter on my windows xp gives me the error "unable to verify your identity"second when i passed the security verification by bypassing the security options on the connection properties of the adapter, windows tries to acquiring network address and continues it for hours. Seems Windows cannot get any ip address from the router.The router works fine with wired Ethernet devices and my iPhone when i connect it wirelessly.
View 1 Replies
View Related
May 14, 2012
normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
if i do hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model : WAG120N
View 1 Replies
View Related
Jan 31, 2012
I need to configure a WAG 120 N as a bridge, so I can have my public IP as an output of an Ethernet port. I need this configuration because I have a non ADSL router managing VPNs and needs the public IP on the WAN port of this router.
View 3 Replies
View Related
Jan 24, 2011
My WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer. When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print. Enable the Linksys router and the printer is no longer found on the ipad. other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?
View 3 Replies
View Related
Oct 24, 2010
I have a WAG120N which runs speedtest.net at 0.1 Mbs. My old router used to get 6 Mbs.I have tried a firmware update & reset, reduced the MTU to 1300 but still no different.Windows Vista & 7 - two different computers, same speed...
View 6 Replies
View Related
Nov 22, 2011
I configured my router Linksys WAG120N as DMZ, but not forward port 80, only port 80.
View 1 Replies
View Related
Mar 22, 2011
when choosing "Mixed" or "N-only" as Network Mode on the Basic Wireless Settings configuration page, the mode resets to "B/G-Mixed" or "G-only" respectively when saving. In other words, it is not possible to use the N network mode.
View 4 Replies
View Related
Apr 18, 2010
I am using WAG120N, and it keeps disconnected from internet randomly, normally between 5-10 minutes. The thing is, when it is disconnected, the adsl lamp is still on, so I think that it is not the network problem. When internet lamp turns off , I try to turn off the device (or unplug the phone cable), then turn it on again (or re-plug the cable), and it will work for certain minutes, then gets disconnected again. I already upgraded the firmware to v 1.00.12.
View 4 Replies
View Related
Apr 18, 2013
I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500
View 2 Replies
View Related
Apr 4, 2012
My WAG120N power light is always red whenever plugged in. I can't access the configuration page. My adapter works fine and the Reset button doesn't work. I can't find any troubleshoot for the "red power light" problem in user manual !
View 3 Replies
View Related
Oct 3, 2011
1) I dis abled the DHCP services on modem router as i was connecting it to a belkin router and after that i cannot accesss the setup of the WAG 120N.
2)If I acces the WAG120N by Lan the internet works fine but if i acces through wirless it does not.
3)Also when ever i connect the LAN cable from BELKIN router to WAG 120N the wirless services stop as well on the BElkin router and i cant figure it out why.
View 1 Replies
View Related
Apr 24, 2013
I have a WAG120N. I wish to use it as a modem only and not as a wireless router.I have another wireless router I want to use to handle network connectivity.I want the wag to be set to 10.10.1.1 and I want my router on 10.10.1.2What bridge mode do I set on my wag? Do I need a crossover cable?
View 1 Replies
View Related
Aug 23, 2011
After the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.
View 1 Replies
View Related
Dec 16, 2011
Does WAG120N Support IPv6 ?
View 1 Replies
View Related
Jul 1, 2011
I have multiple macs and when all of them are connected to the wag120n router, macs can't seem to find/see each other as if they are connected to different networks. I have tried another router ie. netgear dg834g router and this problem didn't occur and i am able to connect over the network without a problem. Obviously there is something wrong with the router settings.
View 2 Replies
View Related
Jan 31, 2011
We have a customer who has a WAG120N as their broadband wireless router, and we've sold them some new equipment, part of which is another WAG120N as our salesperson didn't realise they had one.They have a section of the building which the current WAG120N will not reach. Reading around this forum, it seems that I can give the second WAG120N a different static IP on the LAN and use it to expand the range of the WLAN.If I've read correctly, I need to make all the wireless stuff exactly the same except to use different wireless channels on each router. But what do I do with the DHCP server on the second WAG? Is it fair to say that the clients won't suddenly jump to a different IP because they won't have a cause to request a new one? I read one comment that suggested the second should be configured for DHCP relay, and another which contradicted this. Presumably I just don't configure the ADSL on the second WAG as that will only connect to the LAN.
View 3 Replies
View Related
Apr 5, 2013
what do i need to setup in WAG120N to work with a Wireless Network repeater?
View 1 Replies
View Related
Jan 20, 2012
Accidentally I disabled the modem web access therfore I am not able to open admin console from http://192.168.1.1. How to enable it again?
View 1 Replies
View Related
Jun 4, 2011
I have BSNL Broadband with speed 512 kbps. My old modem gives me speed 0.54 mb . i have checked it on speedtest.net .But my new WAG120N gives me less speed 0.15mb .Why this so happen?i checked all settings
View 1 Replies
View Related
Jan 2, 2013
I have a WAG 120N Modem Router, My question is: Can you assign an static IP to a pc using this router?
View 2 Replies
View Related