Linksys Cable / DSL :: WAG160N Disconnected From Wireless Network
Apr 11, 2011
I bought a WAG160N ADSL2+, I configured it and all the computers can connect to it with wireless. But the problem is sometimes the connection between the wireless adapter and the router will disconnect and I'm not able to connect again (the computer screen in de bottom right corner has a red cross in front of it if you know what I mean). It can take hours before it will be able to connect again. The only way to have the connection back up is to turn off/on the WAG160N. This happens mostly on my machine (windows XP Dlink Dwa-131 adapter and with the adapter that came with the WAG160N) and afterwards on the other machines. Its like the router doesn't want me to connect anymore.
View 3 Replies
ADVERTISEMENT
Aug 8, 2011
I have LinkSys WAG160N V2 with the last firmware 2.00.20 I have very annoying issue, the Gateway always disconnected from time to time .. Some days it work so fine and some days it disconnect 20 times per day and I have every time to go Status >> Gateway and press connect , another weird thing is that sometimes it gaves me speed 3784 Kbps and sometimes 3500 Kbps , sometimes it gaves me the right speed 4700 Kbps i did think maybe it's my ISP problem , but after the upgrade the problem gone for 3 weeks then it back again, and when it back I did make factory reset and reconfigure it again regarding my ISP settings and it did work fine with 3784 Kbps speed and it should be 4700 Kbps.
View 9 Replies
View Related
Dec 30, 2011
I have a home network of 2 desktop PCs. One runs Windows 7 64bit, the other WinXP with SP3. Both have all current updates applied.Both are wirelessly connected via a Cisco-Linksys WAG160N wireless router with Firmware Version:V1.00.16.When the two machines are in contact, file and printer sharing works fine and they appear on the Win7 network map.However, they regularly lose contact with each other BUT they both remain able to access the Internet via the WAG160N and appear in its ARP/RARP table.
View 3 Replies
View Related
Mar 25, 2011
I can find the network OK but whenever I put in the password it just refreshes and tells me I need a password. My son has just got the applemac for his communication studies and neither of us are very bright with computers let alone apple. They are completely different.
View 1 Replies
View Related
Feb 9, 2011
I replaced my old separate modem and router yesterday for a Linksys WAG160N. Basically , my next door neighbor is paying their ISP a fortune and hardly uses their internet at all. Ive offered for them to share mine (With both of us providing full consent , i'm not doing anything dodgy!) as i have a very big download quota and it would save them some money.
Now the 2 houses are separated by an alley but distance from the router to their computer is about 6m. Strangely , my WAG160N doesn't reach that far as my wireless network doesn't even appear when they in their house on their laptop!So after reading up on wireless bridges / wireless range extenders and all sorts of things i'm now very confused.
Im basically looking for the most cost effective way of extending the signal from my WAG160N , possibly through the use of a second router in my garage) to allow the neighbor to get a good signal. I cannot reposition my modem/router from its current location and also cannot connect a second router using an Ethernet cable , it must be done wireless. So , is there a way i can wireless connect my WAG160N to another wireless router in order to extend my signal for my neighbor to use? I was looking at the Netgear WN2000RPT and the WRT160N as someone else had previous success with using this as a repeater.
View 4 Replies
View Related
Jul 15, 2012
I have a old Cisco/linksys router that I want to do a complicated setup with.Heres my current situation.I currently have my computer and laptop linked into my home network over wireless as running a cable to the hub gets in the way of other door ways, But when playing networked games i run the cable as its only for a short time and people can cope with that,However I have recently gotten into minecraft server hosting, and I have previously just Run two cables to the main hub so I can host the server on my desktop and play on my laptop.So here is where is gets complicated.I found my old router and set it up as a central hub for my room, with the laptop and desktop going into that, then one cable going to the hub,However, I am spending alot of time messing around on the server and would like some way for me to connect to the server from my laptop without having to go though the central hub, just using this sub router. But I still want my IP to stay the same when i reconnect to the main network so when my brother and other friends want to play I can connect to the main network and host over that without having to change my server settings for the new IP.
View 2 Replies
View Related
Dec 11, 2010
I have a wag160n and would like to disable the wireless and use as a wired ASDL modem. I can't see any obvious settings I'm the setup or buttons on the unit but was wondering if I were to set the DHCP to disable if
View 4 Replies
View Related
Dec 19, 2012
I have a WAG160N that I've used as a wireless router for ages. I have changed broadband providers and as they have supplied a new router I decided to use that and connect the old WAG160N via a Home Plug AV network and effectively use it as a range extender.
I have read some of the other forum posts and made the following changes:
1) Set up internet as Bridge mode
2) Set DCHP server as relay
When I connect via an ether net cable it works brilliantly but as soon as I try to connect wireless I can't talk to the internet.
View 8 Replies
View Related
Feb 24, 2012
I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
View 1 Replies
View Related
Feb 27, 2011
I'm having issues with the wireless speed of my WAG160N. I'm using WPA2/AES, firmware: V2.00.20. The wireless connection signal is very good and the speed shows 130 Mbit/s.
On a wired connection when testing with numion.com I get 6 Mbit/s which is my DSL speed (this is great). On the wireless connection I get max 1,8 Mbit.
View 3 Replies
View Related
Jan 18, 2011
I have a WAG160N, with firmware 1.00.16. I run several wireless devices at home, a samsung TV, an ipad, an apple tv and an LG media center. I notice that whenever I switch on my LG media centre the wireles connection drops out to the other devices. Then I need to reboot the router and the wireless works again.
View 2 Replies
View Related
Oct 6, 2009
WAG160N gateway and wireless dropouts. Wireless connectivity to file and printer shares will fail after an unspecified duration of time.Internet access may also drop. Repairing the wireless connection does not appear to work. Saving the gateway settings without making changes appears to temporarily fix this issue (some users have reported this does not work). Manually performing a power cycle of the gateway will temporarily fix this issue.
View 9 Replies
View Related
Feb 22, 2011
I have a WRP400 connected to the internet, and have a WAG160N that I no longer use and would like to to extend my wireless range.I connected them via an Ethernet cable and it seems to work fine without configuring the WAG160N (seemed to just work automatically), but I can't access the WAG160N admin GUI (tried all sorts of IPs in the WRP400 range) to change any settings (frustrating). My guess is that it's probably not the best way to set it up.
1. Set the IP of the WAG160N (The WRP400 is set to 192.168.15.1, so should I change the WAG160N to 192.168.15.2. Or should I be setting it within the WRP400's DHCP range which starts at 192.168.15.100?)
2. Swtich off the DHCP on the WAG160N. (I think I tried this late last night and it wouldn't assign an IP to my laptop, unless I did somehting wrong)
3. Connect the two using a ethernet cable.
After I do this I should still be able to access the WAG160N's admin GUI with the IP assigned in step 1?
View 3 Replies
View Related
Oct 16, 2011
I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop. The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen). If I switch WI-FI off on the device, then back on, internet is restored. It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices. It is seen on my Macbook which connects wirelessly via the router. If I try to print from the macbook, the print job will not progress until I re-start the router. Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable. The iPad will not bee seen by the iMac unless I re-start the router. My Apple TV will only sync wirelessly with the iMac if I re-start the router.
View 1 Replies
View Related
Sep 23, 2010
I recently bought a Linksys WAG160N v2 model to replace my old setup of a Linksys WRT54GL + ASUS AM604g (ADSL2+ Modem) i had.I've set it up to dial my ISP's PPPoE connection as i had on the previous setup exactly, And it seemed to work at first.But now i've randomly noticed the connection just dies - the router doesn't respond to wireless at all anymore, and connecting from a wired machine shows the PPPoE link died, while the log says something along the lines of "PPPoE connection terminated: transport endpoint not connected" followed by a big number with lots of zeros and :'s. Probably some kind of IPv6 error address? note that i am not using IPv6 myself nor does my ISP provide any such addresses.
I've already upgraded the firmware to latest and installed the newest WiFi drivers on the machine i was connecting from wirelessly (has an Intel Wifi Link AGN5300 module).
View 9 Replies
View Related
Sep 28, 2012
I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]
View 5 Replies
View Related
Mar 30, 2009
Is it possible to "tweak" the SNR on the WAG160n?
View 4 Replies
View Related
Dec 20, 2011
I've just been sent a new ADSL modem router by my new broadband supplier and plan on using it. However, my question is, can use my old wag160n to replace one of these, which im currently using to connect an old xbox to my wireless network, but also make use of the other lan ports on the wag (i.e. Connect more than one non wireless device to the wag and gain access to my wifi network?)
View 1 Replies
View Related
Jan 21, 2013
I've a 20Mbit/s connection with Telecom Italia provider.My line values follows:-- DSL Information ---DSL Driver Version: AnnexA version - A2pB023k.d21dDSL VPI/VCI: 8/35DSL Status: ShowtimeDSL Mode: ADSL2+DSL Channel:DSL Upstream Rate: 979 KbpsDSL Downstream Rate: 22105 Kbps Down upDSL Noise Margin: 12.0 dB 13.4 dBDSL Attenuation: 10.5 dB 4.3 dBDSL Transmit Power: 14.0 dBm 12.4 dBm?I have issues about connection stability : on HEAVY load download the PPP connection goes down. The sync signal stays up, but the PPP goes down!
In the log these lines corresponds:
Sun, 2013-01-20 23:29:29 - No response to 3 echo-requests
Sun, 2013-01-20 23:29:29 - Serial link appears to be disconnected.
Sun, 2013-01-20 23:29:29 - Enter: tdb_store.
Sun, 2013-01-20 23:29:29 - tdb_store: calling tdb_update.
Sun, 2013-01-20 23:29:29 - Enter: tdb_update.
[code]....
My ISP says that there are no troubles with the line and it can be an issue of the modem...
View 8 Replies
View Related
Jan 2, 2012
When I enable the debug with ?todo=debug shall I see more info in the logs ?How to stop the debugging ?How to print the logs ?What is the difference with debug and ppp_debug ?What is the effect of the sendlog command ? I didn't receive any email with a log !
View 3 Replies
View Related
Nov 20, 2011
When i connect my WAG160N V2 to DSL, i don't get link, but if i tried whit a friend´s modem i get link. I use the same cables and dsl split.
View 1 Replies
View Related
Aug 16, 2012
Struggling to enable Airplay using a WAG160N. Any settings I need on the router? Looking on forums, came across suggestion to disable WMM support. This seemed to work and i had Airplay but now I've lost it again.
View 1 Replies
View Related
Aug 30, 2012
I hard reset the router WAG160N and i can't access it on 192.168.1.1, i can connect to the wireless connection but it shows unindentified network, in properties gateway IP is absent. i also get 169.254.1.38 as IPv4.What could have happened to the modem, I can't use it at all at the moment?
View 3 Replies
View Related
Feb 21, 2011
Two years ago I bought a WAG160N for modem (ADSL) and router functionality. I consider to buy a pure router (E3000 or E4200) to connect to the WAG160N and use that one purely as the modem. How and what should I configure/disable on my WAG160N?
View 3 Replies
View Related
Mar 7, 2011
WAG160N
S/N: SSH00H406302
MAC: 001D7EB42921
Manufactured 04/2008
I can no longer access the internet, and the internet has been difficult to bring up for one to two weeks.Internet light does not come on. Under Status tab, interface is down, tried refresh and connect but nothing.The IP address can be pinged, 4 packets sent and 4 packets received. Tried resetting defaults and refreshing but no success.Bought this router in September 2008 to replace WAG54G which was constantly turning on and off every few seconds.
View 2 Replies
View Related
Dec 22, 2008
Why can I not register a WAG160N router with Linksys? Is this because these devices are not sold in the US?
View 4 Replies
View Related
Jun 16, 2012
Some years ago i have buyed a WAG160N i haven't never used, because once i plug it power, it start to reboot and reboot in a loop...Is there something to do with it or should i put it in the trash ? Firmware using is probably Ver.1.00.15?
View 6 Replies
View Related
Feb 4, 2011
I have a WAG160 setup to use the one fo the LAN ports as a WAN connection. The issue is every now and again the internet connection drops and it seems it is unable to communicate with the DNS server that is providing the internet connection.
View 9 Replies
View Related
Jan 25, 2011
Any hardware that can re-boot a DSL router such as the WAG 160N when the router no longer passes traffic ? Today, while the DSL line and the Internet appeared to be working, I could not log in to the router from a LAN machine and I had to power it off and on again by hand.We have a number of surveillance cams on the LAN and this must not happen, that the cams cannot be accessed, in particular if nobody is on site for a few days.Unfortunately, the WAG 160N does not have a daily re-boot option. What can one do except for installing a timer that switches the power to the router off and and on again ?
View 5 Replies
View Related
Nov 30, 2011
I'v just changed my internet provider. That new one uses Annex b, my wag160n is purposed to annex a. Thats what i'v done. Turn on bridge mode turn off dhcp, set PPPoE with my login and password. And here is my problem. I cant connect by wifi with more then 1 device. I can only connect with my laptop when i'm trying to connect on my xbox it says it cannot get ip adress from router. What shoudl i change ?
View 6 Replies
View Related
Apr 19, 2013
i trried te update the firmware of my WAG160N. I had to choose between two versions. I tried both. But both versions give the message that is the wrong version and the installations stops.
View 9 Replies
View Related
May 24, 2011
I purchased a new WAG160N router a few months ago and recently I have been having major problems with connectivity.The problem is that it resets itself at seemingly random times. I see it happening. The red power light starts flashing red and then the other lights slowly turn green as it re-establishes connection to the internet.
This is becoming extremley frustrating as I do online gaming with my XBOX 360.I use wired connections using ethernet cables. One to my laptop. And one to my XBOX 360.I have contacted my ISP who have done line checks and I have had an engineer look at my line and all is good. I have also replaced all cables to/from the router including phone cords and ethernet cords. EVERYTHING is new.I recall one incident in which my internet was down and I just couldnt get connection AT ALL. I rang my ISP and they got me to log into my modem settings. The settings were all altered for some reason and I have no idea why. When they told me to enter the details in the settings the internet worked immediatley.
View 3 Replies
View Related
Jan 7, 2012
My Linksys WAG160N has worked fine for 2 years however all of a sudden when I power it up it's start normal but after 4 seconds all ethernet lights blink one time and all start from the beginning, it's like it reboot every four seconds.It happens so quick I can't even get to the Internet/Network Settings in WIndows Control Panel.I have tried accessing router setup and installing firmware and both have failed - it can not find the network address.If I try to reset with the reset button on the rear (30sec reset), it stops rebooting and the power LED starts to blink red/green and the ethernet LED of the port where my cable is connected starts to blink alsoI have set IP address manually on my computer as per the Cisco support pages (192.168.1.1), still no response from ping.I have also tried to reinstall firmware using TFTP but it also fails because it can not find the network address.
View 9 Replies
View Related
