Linksys Cable / DSL :: WAG160N Can't Get Connection To IPad / Won't Accept Password

Sep 29, 2011

I have a new iPad and a new WAG160N.  I've wasted many hours trying to get them to recognize each other, with no success.I can connect to the Internet OK but I can't get a connection to the Pad, as it won't accept my password.  I can't find a solution here that I can follow for this model.Why won't my password (no unusual symbols, just 10 letters and numbers) be accepted? 

View 9 Replies


Linksys Cable / DSL :: IPhone / IPad WAG160N - No Continuous Connectivity

Jun 10, 2010

My iphone wireless connectivity to my Linksys router that I have put up with for a year, but as I now have the same issue with my ipad I've decided enough is enough.The issue is that they both connect OK to the router and therefore to the internet, but after a short period of time (minutes) whilst it appears that they are still connected to the router the connection seems to completely hang. At that point I have to go into settings on the iphone/ipad and turn off the wireless connection and turn it on again. This then allows connectivity and internet activity for 5-10 (15-20) minutes before it hangs again.I have no problems with connecting to any other router from the iphone and ipad. And I also have no problems with my PC's connecting to the Linksys router.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N - Apple IPhone And IPad Cannot Find Wi-Fi Signal

Mar 14, 2012

I have a Wag 160n router which works fine with desktop pc connected by ethernet & wirelessly to laptop. My nokia phone finds the wi-fi signal but apple i-phone & ipad dont!

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N - Can't Change Admin Password

Jan 8, 2012

I just recently bought a WAG160N and I have a big issue with it, I can't change the password for the default admin account. All I get is this error in the browser "Error 324 (net::ERR_EMPTY_RESPONSE)"
Quick reset.Power cable disconnect for 60 sec.Factory reset followed by a reset of the router for 60 sec.Clearing my browsers cookies and internet temporary files.Only things I have changed is the Basic Setup to get connected to my ISP and the Wireless settings.
Details about clients, firmware versions etc.
Windows 7 build 7601 Service Pack 1 Chrome Browser 16.0.912.75 Wireless-N ADSL2+ Modem Router V2 firmware version 2.00.20

View 3 Replies View Related

Linksys Cable / DSL :: Cannot Access Username And Password On WAG160N

Aug 3, 2009

I cannot access the Username and password on my WAG160N - the ones I thought were correct do not accepted, nor are the quoted 'defaults'.I have tried holding down 'reset' for 30 secs; I have tried powercycling the router after and during this; I have tried 'resetting' with the phone and ethernet connections unplugged. This is NOT returning the machine to the default settings - and neither is it 'wiping' the existing settings for my ISP.The amusing thing is - it works perfectly well, but I can't alter my security settings and I can't alter other settings if I change my ISP (as I was intending to do).

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N - Wireless Connection Set Up

Dec 19, 2012

I have a WAG160N that I've used as a wireless router for ages. I have changed broadband providers and as they have supplied a new router I decided to use that and connect the old WAG160N via a Home Plug AV network and effectively use it as a range extender.
I have read some of the other forum posts and made the following changes:
1)   Set up internet as Bridge mode
2)   Set DCHP server as relay
When I connect via an ether net cable it works brilliantly but as soon as I try to connect wireless I can't talk to the internet. 

View 8 Replies View Related

Linksys Cable / Dsl :: Wag160n Lost Wifi Connection

Mar 5, 2012

after few years without problem with wifi connection at my home, four month ago began wifi lost connection.

4 iphone with assigned ip address;
3 Portable PC (2 with dhcp and N band, 1 with assigned ip with G band)
Router is not too far from wifi equipment
the wifi is protected with WPA-PSK
Often during day, on pc and iphone we have lost connection, we can see in settting the SSID of my wifi lan, but if we try to connect recive message:Unable to connect to casa(casa is my ssid), on router the wifi led is green fix (not blinking) and only after a few minutes or many try wifi return aviable (for all equipments at the same time and the wifi led blinking)If I want quick connection, without attempt, i simply power off router and after power on, the wifi connection begin aviable!
1. changed SSID, very different from other SSID of my neighbors;

2. changed class of ip address (from 192.168.x.x. to 10.16.x.x);

3. wifi with no protection;

4. tried with & without mac address filter;

5. tried with only 1 wifi connection.

View 3 Replies View Related

Linksys Cable / DSL :: WAG160N Share Connection On Port 1

Dec 11, 2011

I got a spare WAG160N lying around which I want to test to see if I can get a better range with it than my current router.My internet is connected via a cable modem which I connect to the ethernet port 1 on the WAG160N - which in my experience with other wireless routers - will work and broadcasts internet through wifi. However I can't seem to get it to work.After doing a bit of searching I found that some people say this isn't possible on the WAG160N while others say it's possible if I switch the port 1 to "Use as WAN port" in the ethernet setting tab page (Tried it, still doesn't work). I can obviously connect to the router setting page but no internet is flowing through (And the internet LED does not light up)
What settings do I need to use to make this work or is it indeed impossible? It's in bridge mode only at the moment with other settings untouched from factory defaults.One person says it's possible but I can only get it to work with 1 device because it's assigning the public IP on the cable modem onto the one device - but I couldn't get this to work either.

View 3 Replies View Related

Linksys Cable / DSL :: WAG160N - How To Configure To Get Internet Connection

May 30, 2011

Is it possible to use a WAG160N as a straight forward router (wired & wireless) and to "switch off" the ADSL connection?  I have a cable modem and planned to connect the modem to WAG160N by an ethernet cable and then assumed that it would connect to the rest of my network and use the modem as the route to the internet.  But I cannot work out how to configure it to get this internet connection.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N-E1 Configured PPPoE Connection

Sep 16, 2011

I have just upgraded my old WAG54GS to WAG160N-E1 (Annex B). I've configured the PPPoE connection and everything was up and running... for about an hour. Then the router started dropping internet connection on pretty much regular basis (every 40-50min?) - it then takes 1-2 min until it reconnects again... Obviously that makes any online gaming a nightmare.
I'm now running again on the WAG54GS and everything is ok (except it doesn't support >6Mbps speed which is the reason I upgraded the router in the first place) so it's not an issue with the ADSL line.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N V2 Intermittently Drops Broadband Connection?

Nov 9, 2010

I have a WAG160N v2 and a UK Online broadbad account, windows xp. The connection intermittmently drops out, approx 15-30 times per day. I have spoken to my ISP and had the line checked (no packet loss issue), checked the settings on the router against my ISP and also updated the router firmware all with no improvement.

View 2 Replies View Related

Linksys Cable / DSL :: WAG160N Repairing Wireless Connection Doesn't Appear

Oct 6, 2009

WAG160N gateway and wireless dropouts. Wireless connectivity to file and printer shares will fail after an unspecified duration of time.Internet access may also drop. Repairing the wireless connection does not appear to work. Saving the gateway settings without making changes appears to temporarily fix this issue (some users have reported this does not work). Manually performing a power cycle of the gateway will temporarily fix this issue.

View 9 Replies View Related

Linksys Cable / DSL :: Devices Continuously Lose Wireless Connection To WAG160N?

Oct 16, 2011

I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop.   The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen).   If I switch WI-FI off on the device, then back on, internet is restored.   It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices.   It is seen on my Macbook which connects wirelessly via the router.   If I try to print from the macbook, the print job will not progress until I re-start the router.   Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable.   The iPad will not bee seen by the iMac unless I re-start the router.   My Apple TV will only sync wirelessly with the iMac if I re-start the router.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N Modem Just Dropped Wireless Connection Constantly In Various Time Period

Sep 28, 2012

I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]

View 5 Replies View Related

Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router

Feb 24, 2012

I have a  WAG160N  wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset  ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.

What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ? 

View 1 Replies View Related

Configure IPad 2 To Accept Wireless Transmissions?

Jan 15, 2013

how do I configure my ipad2 to accept wireless transmissions?

View 1 Replies View Related

Linksys Access Point :: WAP610N Refuses To Accept Password?

Dec 12, 2012

I set up the WAP610N as a wireless access point, and it refuses to accept the passsword on several iphones (2 iphone4s and one iphone5) and a kindle fire.
The devices are picking up the network, but when the password is entered, the access point refuses the password. I've checked the password numerous times and the spelling is correct.
If the access point's settings are set to no security, there's an instant connection, which I expected, but the password is refused on either of the secure settings.
I bought the WAP610N for my son months ago, but he couldn't get it installed in his old apartment several states away because he doesn't have a CD drive in his computer. Now that he's moved into an apartment close to home, I was able to set it up using my computer. So I don't know if maybe it's a firmware issue  since it sat in the box for months, or something else.
The access point is hooked up through a TP-Link TL-R860 Cable/DSL Router., which is not wireless.

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Won't Accept Password / Key For 5g Band

Jul 11, 2012

I just upgraded to the EA4500 for added range, etc. I'd like to let TiVo have the 5g side and use the 2.4g side for everything else. How can I even tell which band TiVo is using?
I tried setting TiVo up manually but it won't accept the password/key for the 5g band. I gave up and used the "push button" method, but I have a feeling that puts it on the 2.4g band.I do have two different SSIDs and two different passwords.

View 6 Replies View Related

Linksys Cable / DSL :: WAG325N QoS GUI Does Not Accept A Valid MAC Address?

Jun 9, 2011

Yes, latest firmware : Firmware Version:V1.00.12 
I have a D-link wireless-N USB adapter whos MAC address starts with 1C:xx:xx:etc. Unfortunately the QOS GUI does not allow me to enter a MAC address that starts with anything but a zero (0). This is a javascript verification so I guess it would be fairly simple to modify this. Is it possible to have the firmware updated so these MAC addresses are accepted?

View 1 Replies View Related

Linksys Cable / DSL :: Tweak SNR On WAG160n?

Mar 30, 2009

Is it possible to "tweak" the SNR on the WAG160n?

View 4 Replies View Related

Linksys Cable / DSL :: Getting WAG160N WAP Configuration?

Dec 20, 2011

I've just been sent a new ADSL modem router by my new broadband supplier and plan on using it.  However, my question is, can use my old wag160n to replace one of these, which im currently using to connect an old xbox to my wireless network, but also make use of the other lan ports on the wag (i.e. Connect more than one non wireless device to the wag and gain access to my wifi network?)

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N And PPP Disconnection?

Jan 21, 2013

I've a 20Mbit/s connection with Telecom Italia provider.My line values follows:-- DSL Information ---DSL Driver Version: AnnexA version - A2pB023k.d21dDSL VPI/VCI: 8/35DSL Status: ShowtimeDSL Mode: ADSL2+DSL Channel:DSL Upstream Rate: 979 KbpsDSL Downstream Rate: 22105 Kbps Down upDSL Noise Margin: 12.0 dB 13.4 dBDSL Attenuation: 10.5 dB 4.3 dBDSL Transmit Power: 14.0 dBm 12.4 dBm?I have issues about connection stability : on HEAVY load download the PPP connection goes down. The sync signal stays up, but the PPP goes down!
In the log these lines corresponds:
Sun, 2013-01-20 23:29:29 - No response to 3 echo-requests
Sun, 2013-01-20 23:29:29 - Serial link appears to be disconnected.
Sun, 2013-01-20 23:29:29 - Enter: tdb_store.
Sun, 2013-01-20 23:29:29 - tdb_store: calling tdb_update.
Sun, 2013-01-20 23:29:29 - Enter: tdb_update.

My ISP says that there are no troubles with the line and it can be an issue of the modem...

View 8 Replies View Related

Linksys Cable / DSL :: Clarifications For The Wag160n-v1?

Jan 2, 2012

When I enable the debug with ?todo=debug shall I see more info in the logs ?How to stop the debugging ?How to print the logs ?What is the difference with debug and ppp_debug ?What is the effect of the sendlog command ? I didn't receive any email with a log !

View 3 Replies View Related

Linksys Cable / DSL :: WAG160N - Cannot Get Link

Nov 20, 2011

When i connect my WAG160N V2 to DSL, i don't get link, but if i tried whit a friend´s modem i get link. I use the same cables and dsl split.

View 1 Replies View Related

Linksys Cable / DSL :: X3000 - After Updating To FW 1.0.4 Webpages Can't Accept Passwords

Nov 8, 2012

first connect to configuration page is very slow

Second issue: after updating to FW 1.0.4 any web pages doesn't accept any passwords. I can not login to some sites. After reset to Factory defaults I can not configure router - password for ISP doesnt accepted and saved... so internet doesn't work. After rolling back FW all configuret and works fine

View 2 Replies View Related

Linksys Cable / DSL :: Enable Airplay Using A WAG160N?

Aug 16, 2012

Struggling to enable Airplay using a WAG160N. Any settings I need on the router? Looking on forums, came across suggestion to disable WMM support. This seemed to work and i had Airplay but now I've lost it again.

View 1 Replies View Related

Linksys Cable / DSL :: Can't Access Gateway Of WAG160N

Aug 30, 2012

I hard reset the router WAG160N and i can't access it on, i can connect to the wireless connection but it shows unindentified network, in properties gateway IP is absent. i also get as IPv4.What could have happened to the modem, I can't use it at all at the moment?

View 3 Replies View Related

Linksys Cable / DSL :: Connecting Another Router To WAG160N?

Feb 21, 2011

Two years ago I bought a WAG160N for modem (ADSL) and router functionality. I consider to buy a pure router (E3000 or E4200) to connect to the WAG160N and use that one purely as the modem. How and what should I configure/disable on my WAG160N?

View 3 Replies View Related

Linksys Cable / DSL :: WAG160N Won't Connect To Internet

Mar 7, 2011

S/N: SSH00H406302
MAC: 001D7EB42921
Manufactured 04/2008
I can no longer access the internet, and the internet has been difficult to bring up for one to two weeks.Internet light does not come on. Under Status tab, interface is down, tried refresh and connect but nothing.The IP address can be pinged, 4 packets sent and 4 packets received. Tried resetting defaults and refreshing but no success.Bought this router in September 2008 to replace WAG54G which was constantly turning on and off every few seconds.

View 2 Replies View Related

Linksys Cable / DSL :: Why Cannot Register WAG160N Router

Dec 22, 2008

Why can I not register a WAG160N router with Linksys? Is this because these devices are not sold in the US?

View 4 Replies View Related

Linksys Cable / DSL :: WAG160N Rebooting In Loop?

Jun 16, 2012

Some years ago i have buyed a WAG160N i haven't never used, because once i plug it power, it start to reboot and reboot in a loop...Is there something to do with it or should i put it in the trash ? Firmware using is probably Ver.1.00.15?

View 6 Replies View Related

Linksys Cable / DSL :: WAG160N Internet Keeps Dropping Out?

Feb 4, 2011

I have a WAG160 setup to use the one fo the LAN ports as a WAN connection. The issue is every now and again the internet connection drops and it seems it is unable to communicate with the DNS server that is providing the internet connection.

View 9 Replies View Related

Linksys Cable / DSL :: How To Auto-reboot A WAG160N

Jan 25, 2011

Any hardware that can re-boot a DSL router such as the WAG 160N when the router no longer passes traffic ? Today, while the DSL line and the Internet appeared to be working, I could not  log in to the router from a LAN machine and I had to power it off and on again by hand.We have a number of surveillance cams on the LAN and this must not happen,  that the cams cannot be accessed, in particular if nobody is on site for a few days.Unfortunately, the WAG 160N does not have a daily re-boot option. What can one do except for installing a timer  that switches the power to the router off and and on again ? 

View 5 Replies View Related

Copyrights 2005-15, All rights reserved