Linksys Wireless Adapters :: WUSB54AG Adapter Installation - Cannot Associate With Access Point?

Jun 22, 2011

My desktop can go to internet with ethernet wire on.  After installing wireless adaptor driver, the adaptor shows green solid light on 'power' and blinking light on 'Link'.  The Linksys icon shows 'Cannot associate with the access point'.   I called Verizon and was told that the adaptor might have problem.   I want to know if really the adaptor's problem or the adaptor installation problem.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Adapters :: WUSB54AG Not Working Properly

Jul 17, 2009

I just installed windows xp pro 64bit and i am not able to use it im guessing because i need the correct driver, ive tried looking around but couldnt find anything. I also try it working with Windows 7 ultimate (64bit) and i could not get it working on that either.

View 4 Replies View Related

Linksys Wireless Adapters :: Where To Download The Driver For WUSB54AG

Feb 12, 2007

I am surprised the Linksys support page does not provide the driver of WUSB54AG after I found I lost the CD. Where I can download it?

View 3 Replies View Related

Linksys Wireless Adapters :: Original Install CD For WUSB54AG

Nov 24, 2006

We just bought a new computer and I am trying to move things around.  Does anyone have the original install CD for trhe WUSB54AG?  I can't find mine and the driver is no longer online.

View 3 Replies View Related

Linksys Wireless Adapters :: WUSB54AG Not Working With Security Of New Netgear

Apr 16, 2013

Just got a new router. All of my devices connect fine to it except for the desktop that is using an external Linksys wireless adapter (WUSB54AG).The desktop is running Windows XP (Home Edition) SP3.The latest driver for the adapter has been installed (3.0.18.0).I am able to connect if security on the router is turned OFF.The router has 3 security options:

1) WPA-PSK (TKIP)
2) WPA2-PSK (AES)
3) WPA-PSk (TKIP) + WPA2-PSK (AES)
 
My understanding (from Linksys tech support) is that the device SHOULD be able to connect using WPA-PSK (TKIP). My Linksys Monitor indicates that the device is connected to the access point but not the internet (when I used WPA-PSK (TKIP).  The IP address that is assigned is 169.254.3.129 and not the expected 192.168.1.x.When I turn security OFF on the router, the device can connect and I am assigned a "good" IP address (192.168.1.x).

View 2 Replies View Related

Linksys Wireless Adapters :: Connect WUSB54AG Detects Cohiba 3887 Rev0 Device

Oct 22, 2008

When I connect my WUSB54AG, Windows(xp) detects cohiba 3887 rev0 device and I can't install it. How can I fix it?

View 4 Replies View Related

Linksys Wireless Adapters :: Ae2500 Installation To Access Hotspot Wifi On Cell Phone

Jul 13, 2012

I have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell  phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.

View 1 Replies View Related

Most Wireless Clients Associate To One Access Point?

Feb 23, 2011

most of my wireless clients are associating to one ap when there are ap's closer. do i have some setting configured wrong on my controllers?

View 1 Replies View Related

Cisco Wireless :: 1242-AG Repeater Mode Fails To Associate To Access Point

Apr 14, 2011

I have just installed 3 access points along with 6 repeater access points all running V12.4. They are all AIR-AP1242AG-E-K9 using the 2.4GHz radio.
Prior to installation I bench tested that the repeaters would associate with the access points and if one of the access points was turned off the repeaters would automatically roam to another access point. I did not have all 9 devices powered up at the same time, but did have 2 repeaters and 2 access points powered up to simulate association and roaming.
 
During installation as access points and repeaters were powered up everything behaved as expected (repeaters were associating to access points etc.) however during installation once everything was installed the 3 access points were all powered down for half an hour or so and once powered back on the repeaters did not automatically re-associate until they were re-booted.

I have now configured the repaters with parent MAC addresses to reflect the above current assocaition pattern but not yet powered off the access points to test if this forces re-association as this is now a live operational site!!
 
Is it normal to have to re-boot the repeaters if ALL 3 access points are powered down at the same time? i.e. If only one access point is powered down will the repeaters automaically roam to another access point o.k.?

View 5 Replies View Related

Linksys Access Point :: Wap54g Lost Installation CD / Way To Download Drivers

Jun 22, 2007

I bought the wap54g access point.unfortunately i have lost the installation cd.is there a way to download the drivers of this device?

View 4 Replies View Related

Linksys Wireless Adapters :: WUSB300N Connects To Access Point / Not Internet

Jan 4, 2012

I have an AT&T Gateway Wireless router to connect to Internet with my wired computer. In another room, I have another wired computer I also use to connect to Internet. I never have problems connecting to Internet from computer that is hooked up to the router, but I often have Internet connection issues from the computer in the other room. It can find the access point, but not connect to Internet. I reinstalled the WUSB300N driver again, but I still cannot connect.

View 2 Replies View Related

Linksys Wireless Adapters :: Setting Rate With Access Point On WUSB600N (Windows)

Jun 7, 2011

I need to control the rate at which my WUSB600N adapter connects to my access point. By default, it rate adapts through negotiation with the access point based on a set of possible rates. Can I restrict the set of rates my adapter can use (without re-writing the driver ). I've looked at netsh which provides stats about the rate my adapter is actually using but doesn't appear to allow me to set the desired rate. I'm using Windows Vista by the way.

View 4 Replies View Related

Linksys Wireless Adapters :: WUSB600n - No Installation CD

Apr 18, 2012

So, I bought a used WUSB600N Wireless Adapter and am having difficulty installing it. Of course, there was no installation CD to go with it, so I went to the website to download the drivers and updates and still can't get it to install. 

View 1 Replies View Related

Linksys Wireless Adapters :: AE1000 Installation With Windows 7?

Jan 29, 2011

Trying to install on Wi 7 32 bit.  When starting driver installation I receive an ACCESS DENIED error and the driver does not install.

View 1 Replies View Related

Linksys Wireless Adapters :: Installation For AE1000 Is Not Working On XP

Jul 2, 2011

When I insert the disc for my new AE1000, the setup opens automatically and begins to run.  Before even letting me read the software end user license agreement, I get a screen that says the following: "Our Customer Support team can assist.Your Linksys Adapter was not successfully set up."I can not figure out any way to keep this message from showing up.

View 4 Replies View Related

Linksys Wireless Adapters :: AE2500 Cannot Be Located For Installation

Jan 8, 2012

I have tried numerous times to install the disk and the adapter, but it always says it cannot locate the adapter.  I know that the ports (I have tried them all) are working properly because they have been in use.  I tried the chat.  He suggested I call the 1-800 number.  I don't have time to wait on hold forever, which I did anyway until I finally hung up. 

View 5 Replies View Related

Linksys Wireless Adapters :: Wusb100 Installation Error 211 On Windows 7

Jan 9, 2012

I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine.  I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter."  At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install.  The I get error 211 which says the adapter is plugged in wrong and to try again.  I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up.  Thoughts?  I have also tried to manually install the drivers but they are installed.  The trouble is I can't see the adapter. 

View 2 Replies View Related

Linksys Wireless Adapters :: Wusb100 V.2 Windows 7 64 Driver Installation

Nov 30, 2011

I just installed windows 7 on my wifes new com and the device couldn't detect any connections using the default drivers (windows called it an nvidia wireless network card). I downloaded the drivers  put them on her hd via flash drive and attempted to update the device drivers through the device manager but it says the drivers are already up to date. I uninstalled the device and windows called the device MCF-J415W and when I tried to update the drivers again it said the drivers were not correct. I'm not sure what is going on here and why linksys doesn't just have a .exe driver installer. I've had the same issue with my wife's computer when it had win xp except it didn't have any generic drivers to install. Also I tried selecting the driver from the list of pre-loaded drivers and found one for the exact device but it would not install those either.

View 2 Replies View Related

Linksys Wireless Adapters :: WMP54GV4 Installation Via Hardware Management

Aug 20, 2007

I used several of these wireless nick's in various systems. Installation was always done without using Te Linksys monitor. Just the installation of the driver via hardware management.

View 4 Replies View Related

Linksys Wireless Adapters :: WMP600N Installation On Windows 7 64bit Ultimate

Dec 26, 2009

I have spend some time today trying to get my WMP600N-EU PCI Adapter installed. However up till now without any success. I run the installation CD with instructions, but the adapter is not found when I mount it into the PCI slot. I have tried both slots without success. Each time I get error 212.

View 8 Replies View Related

Linksys Wireless Adapters :: AE1000 Not Working / Can't Click Next Button To Continue Installation

May 28, 2011

It used to work, but just stopped.  We have tried to reeinstall but it won't recognize the adapter.  I cant click the next button to continue installation.  I have changed USB ports and restarted the computer.  I have unstalled Norton 360.  But it still won't install. 

View 3 Replies View Related

Asus RT-N12B1 / Port Forwarding Broken With Installation Of Access Point?

Mar 3, 2012

I recently purchased an Asus RT-N12B1. It has an external hardware switch which allows the router to operate in different modes. I put in access point mode. Then I connected an ethernet cable from a LAN port on my Verizon supplied Actiontec MI424WR-GEN2 E router to a LAN port on the access point and turned off the wireless in the router.

I have dynamic DNS setup and port forwarding setup in the router to forward from port 50000 to 192.168.1.2:22 which is a server plugged into a LAN port on the router. This is no longer working since adding the AP and disabling wireless on the primary router. how to debug?

View 1 Replies View Related

Faulty Wireless Adapter Or Access Point

Dec 13, 2011

i cannot excess wireless Internet my laptop keeps saying , [ faulty wireless adapter or access point ] what can i do?

View 1 Replies View Related

Linksys Wireless Adapters :: WMP54G Ver 4 PCI Adapter Will Not Work

Nov 8, 2012

I have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.

View 1 Replies View Related

Linksys Wireless Adapters :: WMP600n PCi Adapter Does Not Reconnect

Jan 20, 2012

I have a Linksys wireless WMP600n PCi adapter installed in my desktop PC and after recovering from standby, it does not automatically reconnect.  I have to right-click on the Wireless Networks icon in the system tray then select "Repair".  I would say it does this 9 times out of 10 (1 time in 10 I seem to luck out and it restores the connection automatically).
 
I have an Asus M4A88TD-M motherboard with 1 Gb of DDR3 RAM and I am running Windows XP Home Edition (SP3).  There is only one PCi slot on this motherboard.  Also, I am not using the wireless network software that shipped with the product but rather the native wireless networks application software that shipped with Windows XP.  I have had this problem with the original driver that shipped with the product CD and the problem persists with the latest driver.  I have not enabled Hibernation and there are no active power saving modes on the PC.I have reviewed all of the options in the Wireless 600n Properties/Advanced tab and have enabled the Continuously Awake Mode and disabled the Power Saving Mode but  the problem persists.
 
I have two other PCs with the older Linksys wireless WMP300n PCi adapters and they do not exhibit this behaviour after recovering from standby - they reliably reconnect.

View 7 Replies View Related

Linksys Wireless Adapters :: How To Install WUSB600N Adapter With Windows 7

Nov 8, 2009

I am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders:  Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
 
1. Make sure your WUSB600N is inserted in your computer.
 
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
 
3. Right click on the "Linksys WUSB600N Adapter.
 
4. Choose the option to " Update Driver Software"
 
5. Choose "Browse My Computer for Software"
 
6. Navigate to the desktop and choose the folder  that contains the name of your Windows 7 platform.
 
7. It should update but, HOLD ON! We are not done yet!!!
 
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your  existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!

View 5 Replies View Related

Linksys Wireless Adapters :: WUSB54GSC Adapter Dropping Net Connection

Feb 23, 2011

I'm using the WUSB54GSC on a IBM Desktop computer, not old, but not new by any means.  We have wireless internet through Comcast, and my room is on the second floor.  The router is on the first floor, but it's almost just underneath my room.  The internet seems to connect completely fine, but it will disconnect at some things.  For example, when I tried to go to mapquest, it was like it was flooding, and it dropped the internet connection.  I also play games online, and when I play the actual game itself (GTAA/Online) it plays just fine, no lag, nothing like that, but when I try to connect to Teamspeak, when it's loading the channels after it connects, it just drops the connection..

View 1 Replies View Related

Linksys Wireless Adapters :: Can't Connect To N-Band With AE1000 Adapter

May 22, 2011

I have a Linksys WRT600N wireless router.  I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC.  I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it.  The signal strength shown is good, but it still can't connect.

View 2 Replies View Related

Linksys Wireless Adapters :: E1000 Can't Get Online With 1000 USB Adapter

Aug 27, 2011

Having problem getting another computer online with   because it askes me for a password to tmy E1000 CIsco Router but ddidn't get password when i first set it up..  Router number, series, IP address doesn't work either.  any  thoughts on possible passwords or how i contact Cisco for assistance. 

View 1 Replies View Related

Linksys Wireless Adapters :: Usb Adapter AE1200 Losing Connectivity?

Aug 21, 2012

I have the model AE1200 usb adapter and its been working great for over 6 months, but lately it has been inconsistently working.   It has stopped working then i have to reset the adapter and then it will work for a little bit and then it will do it again.   is this a common problem or is it likely my adapter is failing?   Is there an update that i am missing? 

View 1 Replies View Related

Linksys Wireless Adapters :: Wusb11 Adapter Not Detected By Windows 7

Mar 13, 2011

I've got a bit of an issue. A friend of mine has recently gotten windows 7 installed into his desktop. When he tried to install the network adapter (wusb11 version 2.8), it installed. However, when we searched for it in the device manager, it did not appear. does Version 2.8 only cover up to Windows XP or is there software to make it work for Windows 7?

View 3 Replies View Related

Linksys Wireless Adapters :: WUSB600N Network Adapter / Lost CD's?

Jan 18, 2011

I am trying to connect to the internet a second, older tower using the WUSB600N ver 2 adapter, the unfortunate part is that I have lost my CD's that originally came with the adapter. I am on my primary machine right now so I am able to get online. I am wondering if there is a way that I can get the proper drivers or software, put them on a USB drive and then put them on the computer that I am trying to connect?I have already tried this, but I cannot seem to get the steps right or I don't necessarily know what I am doing. I am at the Linksys support Page [URL] and I have tried to do as I mentioned before, but I am sort of just expecting it to GO and its not working. The computer i would like to make the WUSB600N adapter for is running windows XP pro Service Pack 3?

View 1 Replies View Related

Linksys Wireless Adapters :: WUSB54GS Adapter Finds Just 1 Or 2 Networks

Oct 4, 2012

Yesterday, I changed over to my new ISP (Orange). I have installed their router but the Linksys Adapter can't find it?I have laptop which found the Orange router straight away so it is working correctly. Also, the laptop lists around 10 networks in the area.
 
The WUSB54GS adapter  finds just 1 or 2 networks but never the new Orange network I have set-up.I've tried uninstalling and re-installing, downloading the version updates but nothing works.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved