Linksys Wireless Router :: Add Pppoe Passthrough In E3000?

Sep 22, 2011

I have e3000 but in VPN Passthrough I don't have ( pppoe passthrough ). Just I have is ipsec + pptp + l2tp only. How could I add ppoe passthrough in my e3000.

View 2 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG160N No PPPOE Passthrough Option On VPN

Jul 7, 2011

I just bought this router recently found out its a strong good router but i got shocked that there is no PPPOE passthrough option on VPN passthought i am disappointed because this option is soo important to me and i just spent money on nothing, is WAG160N doesnt support PPPOE passthrough ??? and if it does how can i do it .

View 9 Replies View Related

Linksys Wireless Router :: E3000 - Way Of Getting IP From Pppoe Server?

Jul 22, 2011

I recently bought an E3000. I am trying to setup a wireless home network.Google and tried a lotta things (power cycle the most no. of times ). Nothing worked.So I poked around. Looked up the IPConfig of my PC with wire connected directly(no router), was 192.168.0.xxx. So I hit 192.168.0.1 in my browser address bar, and it came up with the login page for a D-Link DIR600. A wireless router with wireless disabled. Apparently this is being used as a switch by my ISP. This I know cause I checked the active connections and DHCP reservations on the D link and it showed up about 100 different PC's (including MAC and IP addresses).

View 9 Replies View Related

Linksys Wireless Router :: E3000 - Pppoe VPN Pass Through

Aug 20, 2011

I have e3000 but in VPN Pass through I don't have ( pppoe pass through )
 
Just I have is ipsec + pptp + l2tp only
 
How could i add ppoe pass through in my e3000

View 1 Replies View Related

Linksys Wireless Router :: E3000 - PPPOE Connection Is Getting Frequently Disconnected

Mar 6, 2012

I want to share PC internet (PPPOE connection) on my linksys wireless router (E3000)Problem : When i directly connect internet wire in router, pppoe connection frequently gets disconnected. So what i wanted was to share my pc internet on router.I have two lan card on windows 7 installed PC, 1st lan card is connected to internet cable and i can access internet on pc, second lancard is connected to wireless router. So basically what i want is to share pc internet ( PPPOE ) on wireless router through DHCP connection type.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 Can't Get IP From PPPoE Server

Sep 19, 2010

I installed a Linksys WRT54G2 router earlier this year and set my Siemens modem from AT&T(Actually from SBC before the two merged) in bridge mode.  I did this so I could change the NAT setting on our internet, which was interfering with my Xbox.  It worked for about 4 or 5 months with little to no problems.  Recently, however, the internet has been disconnecting and when I check the status page on the router it says it is disconnected.  Sometimes clicking on the connect button will work, but usually it will say "Connecting" and keep refreshing the page for a little while without any change, then give me a message saying it couldn't get the IP from the PPPoe server.  Turning it and the Siemens modem on and off and fiddling around seems to solve the problem, but only temporarily.  Interestingly enough, I don't think it ever interferes with my Xbox.  Until recently, the Xbox was set as the highest priority on the QoS page, but I changed the computer to the highest priority and it hasn't worked.  In addition, the small, thin green light bar just below the Linksys logo on the top of the router has just recently started changing to orange occasionally

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Won't Connect Through PPPoE

Nov 17, 2012

I've been using my EA4500 since it's original launch date as a PPPoE router through another router/modem which is the Netgear DG834G V4 set to Modem Only mode which was working fine for a long time!A month ago, a friend wanted to borrow the Netgear Router and after he gave it back I reset it like I always do and entered my settings in router mode(i.e. username and password) to check if I havewe working Internet connection and that the router is working properly and it was working properly like it was before I lent it. Now comes the problem, if I keep using the Netgear router as the PPPoE handler and make the EA4500 work as "Automatic Configuration DHCP" it works flawlessly but if I set the Netgear router to modem mode and make the EA4500 handle the PPPoE connection, the report in the troubleshooting tab keeps on saying "Connecting" endlessly!
 
Note: I've replicatedthe settings that I used on both router before and after lending it to my friend so there's no difference in settings!

View 6 Replies View Related

Linksys Wireless Router :: WRT310N V1 Cannot Get An IP From PPPoE Server

Nov 17, 2012

I have a Linksys WRT310N V1.I am trying to connect this via PPPoE to another Thompson router/modem that has been succesfully switched into BRIDGE mode.The Linksys router is conneted via ethernet cable to an ehternet port on the Thompson router.The ADSL cable is pluggedinto the WAN port of the  Thomson 'bridge'.There is no cable in the WAN port of the Linksys router.
 
The Linksys router is set up to connect over PPPoE using the username and password that was given to me by my ISPs tech support (checked and double checked).The DHCP server on the Bridged Thomson is set to ON. DNS is set to OFF.the DHCP server on the Linksys router is set to ON.

View 2 Replies View Related

Linksys Wireless Router :: When PPPoE Dual-Access Will Be Available For EA650

Dec 27, 2012

I extremely need PPPoE Dual-Access on my EA6500.I'v paid $225 and can't watch IPTV So, I'm somewhat disappointed with tis issue...

View 9 Replies View Related

Linksys Wireless Router :: Routing PPPoE Subnet Using EA3500

Oct 4, 2012

I was assigned a static block over PPPoE from the ISP.  I can connect to the internet using the gateway address but I need to route the other static IPs to my servers.  I might say that I accomplished it on a couple of older routers - E1200 & WRT120N, but I cannot get it to work on my new EA3500.  I have 5 usable IPs plus the gateway IP that is assigned with the PPPoE connection on the WAN port.

View 8 Replies View Related

Linksys Wireless Router :: WRT54GS - PPPoE Automatic Login?

Aug 2, 2011

I have a WRT54GS wireless router.  I can successfully set up the router with my DSL modem for PPPoE.  Here's my problem.  The router configuration requires you to put in the userID and password, then logs you in to your ISP automatically.  I DON'T want it to do that.  Is there any way to configure for PPPoE where ISP login is controlled manually; i.e., when the user tries to connect to a web page, a dialog pops up for entering the password?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 - Cannot Get IP Address From PPPoE Server

Sep 20, 2012

I have been working on this for hours and getting frustrated!   This router has been set up for over a year with no trouble, but recently had trouble connecting with my wireless devices and was kicking my wired (ethernet) laptop off when it is usually on all the time.
 
Now,  my wired connection works through the router, the wireless devices all connect to the network but do not have access to theinternet.    From the router's setup page, when I enter my PPPoE information and go to status and connect, it tries to connect a few times then gives me the error message 'cannot get IP address from PPPoE server"
 
I have tried updating firmware, resetting, restarting, recycling power, chat support with ISP and chat support with Linksys.   Have verified my username and key and those are correct otherwise I'd have no internet access at all.  I do have wired access but not wireless.   The wired connection does go through the router.
 
Bridging - my modem is a bridging modem only, so it shouldn't be that.

View 4 Replies View Related

Linksys Wireless Router :: Brand New EA3500 Won't Connect To PPPOE

Oct 24, 2012

When the ethernet cable is plugged directly into my laptop i can input my user name and password and connect directly without a problem. But as soon as i plug the cable into the router, the activity lights turn off like its not plugged in on the other end...which it is. So when going through the setup process, both using the cd and inputting the information on the web based setup. It does nothing, the automatic setup says the cable isnt plugged in. When using the browser setup i can click connect as many times as i want and it does nothing but say disconnected.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 - Not Custom DNS Server Using PPPoE?

Dec 22, 2012

I look forward to the new firmware can improve this problem.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gx4 Can't Connect To Internet By PPPoe

Feb 18, 2012

I am using wrt54gx4. I have a IP camera connected to it. I can view the live images on the intranet and internet. Not too long ago my DSL company upgraded my DSL modem to a newer model. Then I can not connect to the internet by PPPoe. DHCP is fine. So the only connection type works is DHCP. But now I can not view the live images on the internet. I can only view the live images on intranet( I mean if I open web browser and type url.. is the port, I can view the live image).

View 1 Replies View Related

Linksys Wireless Router :: Frequent PPPOE Disconnects On E2500?

Dec 13, 2012

I have a Cisco/Linksys E2500 router that I have had for over a year and it has worked without issues for over a year.  However my wireless ISP just switched my CPE from A Mikrotik wireless radio to a Ubiquiti wireless radio.  As soon as they did this my PPPOE sessions from the E2500 (acting as my PPPOE client) start disconnecting and reconnecting every few minutes causing major problems with my internet and voip connectivity when it looses connectivity every few minutes.
 
The strange things is if I connect my much older WRT54G router as a PPPOE client (with the same exact PPPOE configuration), it works just fine and I don't have any PPPOE disconnects. 
 
I upgraded to the latest firmware on my E2500 and nothing changed, it still disconnects my PPPOE sessions probably close to 50 or 100 times an hour. 
 
I'm thinking it's some sort of compatibility issue between the Ubiquiti Nanobridge Radio CPE and the E2500 router acting as my PPPOE client.  Also another thought was that perhaps my ethernet port wasn't negotiating speed/duplex correctly on the E2500. 
 
Is there any way to hard code the speed/duplex on an E2500?  I can't seem to find any spot with that setting.

View 8 Replies View Related

Linksys Wireless Router :: Configure Pppoe On WRT120N It Say It's Connected But Cannot Access Wan

Aug 11, 2010

I have configure pppoe on my WRT120N it say it's connected but cannot access wan side of the router.

View 5 Replies View Related

Linksys Wireless Router :: E1000 Suddenly Stopped Connecting PPPOE?

Jan 24, 2013

I have a Linksys E1000 router just upgrade to the latest 2.1.0.2 firmware...I have a PPPoE connection which used to run smoothly on the router..however off late...suddenly the router stopped connecting..it always shows "connecting" in the status tab of the router page...and eventually says failed to obtain IP address...however when I attach the cable directly into my PC it works just fine.I also had a word with my internet provider...he's kept the MAC open (or something like that)  so he said that isn't the issue and he keeps saying there must be some issue with the router. However, occasionally the router DOES connect for half hour or so and then just refuses to connect again !..

View 2 Replies View Related

Linksys Wireless Router :: E900 Randomly Dropping PPPoE Sessions

Jun 20, 2012

New E900 router drops PPPoE session and gets new IP address randomly every 1-20 hours. Tried different E900, does the same thing.  Disabled IPv6, no change.  Upgraded FW from 1.0.00 to 1.0.01, no change.  I have an SPA112 ATA behind the router and it has to re-register with the VoIP provider every time the IP address changes, so I'm afraid of my call getting dropped if this occurs while I'm on the phone.  Using an old WRT54G or a different brand of router it will keep the same PPPoE session for weeks, so it is not the ISP.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 PPPoE Internet Connection Not Working?

Nov 29, 2012

I recently buyed a Linksys EA6500 wireless router. I accessed [URL] to access the settings interface of the router. Went to "Connectivity Internet Settings" and chose type of the internet connection as PPPoE. Entered the username and password, clicked ok.
 
No internet access.

View 9 Replies View Related

Linksys Wireless Router :: E1200 PPPoE And IPv6 Not Working Fine

Feb 7, 2013

Have a v2 E1200.  Connect with PPPoE to ISP.  IPv4 works fine.  With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP.  This /64 would show up under 'status' / 'local network'.  Although it did not seem to advertise this space to PC's on my network so I was unable to use it.  I updated firmware to 2.0.04.  Now it does not even pick up the IPv6 /64 at all.
 
Anyone have PPPoE and IPv6 working?  Anywhere I can download 2.0.01 to try it again?
 
Is there a model of router that actually works with IPv6?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2 V1 - Access PPPoE Modem With Wired Ethernet?

Oct 13, 2011

I am using the WRT54G2 connected to a cable modem that requires a PPPoE login.  I followed the Service Providers instructions and cloned the modems MAC address to the WRT54G and setup the PPPoE user id and password.  I can then plug my PC into one of the Ethernet connections on the back of the WRT54G and everything works as expected.  First I connect to the WRT54G2 and then I open a PPPoE connection in my network settings and it logs into the service provider and everything works as expected.  But when I connect to the WRT5G2 wirelessly I connect to the AP fine.  When I open the same PPPoE connection to the service provider it fails, the message says I have the wrong userid or password or that the protocol is not supported.  Of course I know the userid and password is correct because it works when connected with Ethernet cable.  I have tried disabling the security on the wireless network but that did not seem to work.The modem is a HomePNA HCNA Voice Endpoint.I am at the latest firmware 1.0.04.

View 7 Replies View Related

Linksys Wireless Router :: WRT120N / PPPoE - Bridge Modem And Connect To Internet

Dec 6, 2011

I recently changed my internet connection to DSL from Cable, so now I'm using PPPoE type of connection.
 
Right now my router is configured as Automatic DHCP with the modem doing the PPPoE connection. All is fine and well.
 
Since I own a PS3, and Nat Type 3 conection is really bad for my online gaming, I would like to bridge my modem and connect to the internet through my router. That way I can properly forward my ports, use QoS and effectively get a better connection on the PS3.
 
I was able to successfully bridge the modem, but the PPPoE config on the router isn't able to connect to the internet.
 
Modem and router have been reinitialized after the configurations were changed. I do have the username and passwords, and they were properly put on the router.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Set Up To Sign Into ISP's PPPoE To Avoid Double-routing

Nov 19, 2011

I'm suffering from an annoying problem with my E4200 router. I have a DSL connection. I have my DSL modem in bridge mode and I have my router set up to sign into my ISP's PPPoE to avoid double-routing. This set up worked marvelously with my previous WRT54G and WRT610N routers.Now the E4200 signs me out of PPPoE every ten minutes or so. I have the connection setting on "Keep Alive" but it seems to be dropping the connection regularly. I took the router back and was given a replacement. The new router is doing the same exact thing and now I am beyond the 30 day return limit so I'm stuck with the E4200. I'm running the latest firmware 1.0.03
 
I reinstalled the WRT610N and the connection is steady but the WRT610N has its own problems (devices connected via wireless cannot see wired devices and vice-versa). I'd like my new router to actually work properly. I've ruled out errors on my end and given that two brand new units of the E4200 generated the same problem I tend to believe it is a design error.

View 9 Replies View Related

Linksys Wireless Router :: Does Cisco WAP4410N Wireless-N Access Point Support PPPoE

Feb 21, 2013

Does Cisco WAP4410N Wireless-N Access Point support PPPoE ?If yes how can I configure the PPPoE conexion?

View 1 Replies View Related

Linksys Wireless Router :: EA6500 When Connect PC Directly To Modem / Configure PPPoE Connection

Mar 8, 2013

I have rather huge connection at home. DL speed 80Mb, UL speed 3Mb.When I connect my PC directly to modem and configure PPPoE connection, I get 81Mbits/sec. When I connect my old ASMAX $30 router, I get 78 Mbit/sek. And I find it OK.But when I connect my EA6500 I get 28 MBits/sec. Same result on wire as on wireless connection. Of course If I enable prioritisation, I get even less, 12-15 Mbits/sec.I tried already even configuration with ASMAX as wired router and EA6500 connected to its LAN port. It gives me 50Mbits/sec.

View 5 Replies View Related

Linksys Wireless Router :: Wrt54gl Broadband Limit / Couldn't Connect To PPPOE Network

Oct 24, 2011

I've recently bought a WRT54GL router, and I`m having some problems with it. The original firmware the router came with had a bug, and couldn`t even connect to a PPPOE network. I downloaded the latest firmware version for this model (4.30.14 build 5, Oct. 26, 2009). Now it can connect to PPPOE but the broadband speed is limited to ~ 30Mbits/s. My ISP normally provides a download speed up to 80-90MBits/s, and if I bypass the router, and connect the internet cable directly to my PC, it works.
 
The QoS is disabled, so this can`t be the problem, but I searched the internet, and I found that it can be because the router`s CPU is too slow and can`t handle connections up to 80-90Mbit/s download speed, but this sounds a little bit weird to me.Did any of you gus run into this problem? Is it a hardware problem, or a software one? Maybe there`s something I need to set up in the admin interface?

View 3 Replies View Related

Linksys Wireless Router :: E4200 Version 1 - Terminate PPPoE On Really High Speed Connection

Jan 17, 2013

Used an E4200 version 1 to terminate PPPoE on a really high speed connection? By that I'm talking say 400Mb or higher.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GS Factory Defaults / Resetting Connection Type From PPPoE To Bridge

Jan 17, 2012

I'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.

View 2 Replies View Related

Linksys Wireless Router :: E3000 FTP Not Seen On The WAN

Apr 22, 2012

I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
  
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
 
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
 
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?

View 2 Replies View Related

Linksys Wireless Router :: How To Get Most Out Of E3000

Jun 29, 2011

I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.

View 9 Replies View Related

Linksys Cable / DSL :: PPTP Passthrough WAG320n?

Sep 22, 2011

I'm trying to access a machine via pptp through a new WAG320n without any success. PPTP Passthrough is enabled i've opened port 1723 TCP pointing to my machines ip-adress but i can't get the connection working.

View 9 Replies View Related

Linksys Wireless Router :: E3000 No Address From ISP On WAN?

Apr 2, 2012

I have an e3000 that cannot obtain an address from the ISP.  I can get an address on the computer and an old router by directly connecting the cable to the computer or the router.  I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router.  I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work.  It worked fine on Saturday until a bolt of lightning hit close to the house.  Since then, I cannot get the e3000 to connect to the ISP.  

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved