Linksys Wireless Router :: E2000 - Request Timed Out When Ping From One Device To Other?
Jun 29, 2012
I have a E2000 router/access point. I am able to connect 3 laptops, 1 smartphone and 1 printer wirelessly to the access point. All computers and smartphone can access the Internet. The problem is that none of the devices can connect with each other and thus cannot print. I can ping the router, no problem. Get "request timed out" message when trying to ping from one device to the other. Router firmware is 1.04
Can your wireless router do a ping test to 18.104.22.168 [URL] or any other [URL] for that matter?Mine can't, either with my wireless PB G4 running OS X 10.4 or wired Dell running Windows XP. I tried it with a wrt54g v5 & wrt54g v6 both tests got a 'request timed out' with 100% packet loss. v5 had the latest firmware, v6 is still at 1.00.9
I have a strange issue where the first ping always times out, but the following goes through fine.I have Cisco877 and connection to the internet is fine. I connect a PC to one of the Fast Ether ports and I am able to ping the router without any issues. However, the moment I ping an external website [URL], the first ping request fails. after that the following request come through quickly.
I have a Cisco 1801 Router, but whenever there is anything plugged into the integrated 8 port switch for example two computers, I cannot get them to ping each other. All of the ports are on the same vLAN.
I am a Cisco newbie, so sorry if this question/query is really basic. Is there anyway I can test the integrated switch to see if it is faulty.
i am having a very wierd problem with my current internet connection , Its wired and while accessing websites seems just fine .. Accessing ANY program on the PC that requires internet does not work .. Examples of those can be steam/origin/any messenger/skype/teamviewer/teamspeak and the list goes on.. They all act like i dont even have an internet connection. I tried pinging in CMD by using Ping Google and i always get a request timed out .. I have also tried tracert Google and after the three * * * Its always a request timed out as well.. I have no idea whats causing and its pretty annoying as i mainly use the internet for skype and steam, Also on a side not this is not a problem with my laptop as i tried connecting to some random unprotected network that was near me and it worked fine
Basically my friend has a game server with a particular IP. But lately I don't seem to be able to even 'see' that server. Pinging the IP gets a timeout. I did a tracert on the IP and from the first hop onwards it gives me 3 stars followed by a 'Request Timed Out' until the 30'th hop.
Just replaced my older Cisco router with an E2000 and now none of the connected PCs can ping each other. I have two wired and two wireless nodes on the 192.168.1.X subnet (defaults) using DHCP. All nodes can access the Internet with no problems, but none of them can see each other -- no ping, no Network Neighborhood, nothing. Since this all worked fine before I swapped routers and I've made no changes on any of the nodes, I presume this is something about the router.
I've tried all the usual troubleshooting steps (spent 10 years working as Systems Engineering in IP networking) - no luck. I've also tried various settings of the router (e.g. turned off SPI) but no luck either.
my new router doesn't block connections between attached PCs on the same subnet ....
P.S. One strange observation : using Wireshark I can see the pinging node (.137) ARP for the destination IP (.102), and the ARP reply is sent by the destination node (.102) , but it looks like the Echo Request never makes it to the target machine -- i.e. I think the router is blocking it.
I first noticed it in games, and decided to ping my router in CMD. I see the occasional "request timed out", and not sure how to fix it.My other computers connected to the network are working fine, and I've tried USB Wireless adapters in my laptop which work fine, which implies the problem lies with the inbuilt adapter itself.I've tried reformatting, and updating drivers, but to no avail.I thought maybe the adapter might just be faulty, but then I decided to test it on Linux. I pinged the router in the terminal and... it seemed to work fine. I thought maybe some background process in Windows might be doing something to cause the problem, so I started in safe mode (with networking)... still the problem remained.
I can access it at work and on other ISP's but not on my home wireless network. It won't work from any device on this network. I have reset my modem but that didn't work. It won't load and when I ping from command prompt, I get a 'Request Timed Out" message.
I have reinstalled windows 7 on my Toshiba laptop, I have my wireless set to automatically connect, I have excellent signal strength and have another pc connected to wireless router, but my laptop does not capture IP addresses. I tried renew command but got message unabl to contact your DHCP server, request timmed out.
recently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
I've been having problems connecting my laptop to the internet through wireless. When I plug it in with a cable it works fine. I also know my wireless works fine because i have other things attached to it. When I try to connect it says limited or no connectivity, but the signal strength is excellent. I have tried to repair the problem but it then tells me it cannot renew my ip address. I've also tried the ipconfig /release then renew, and thats when it says about my DHCP.
I currently have 2 e4200 wireless routers. The first router is connected to 3 devices via ethernet, and the 4th port is connected to my other e4200v2 which is set as bridge mode. The main router is at one end of the house, the second bridge mode router is at the other end.My wireless devices are connected to the main e4200v2, along with all the wired clients.
When wirelessly connected to the 2nd e4200 (the bridged one) I cannot connect to or ping any wireless clients that are connected to the main router. (For example, in my bedroom I am connected with my computer to the 2nd bridged router, and I am trying to ping my other computer that is wireless connected to the main router. I am unable to ping to this computer. When I am conected wirelessIy to the mian router, than I am able to ping the other wireless computer on the same router. Note:I am able to access any hard wired devices to the main router, regardless of which router I am connected to. The issue only appears to be when trying to connect to a wireless device that is connected to a different router than the device I am connecting from.Both routers are setup on the same subnet mask with firmware Ver.22.214.171.124204
i have a wrt320n router and it used to work before but my internet provider said that its a router issue might need to change the wep setting or channel or connect ps3 up through the routers list of accessible .. So basically its not registering the IP address given and the wep key isn't wrong but its not approving it . Not sure what to do. I tried unplugging the router and I also did the same for the modem no luck. Signals 100% and my lap top and wii connect fine.
Replaced my DLink 655 (had stopped working) with the E4200. Every time I enter a new url, there is a 10 second delay while the 'sending request' message is showing at the bottom of the browser. When the website is connected, there is another 'waiting for xxx' delay for several seconds.I am on a Mac system (laptop and desktop).This never happened with the The delay occurs with wireless or with wired access. Happens with Chrome, Firefox, and Safari. Does not happen if I plug the desktop directly into my cable modem. I have Optimum Boost which is the fastest ISP in the area (possibly the country).I emptied the cache thinking it is DNS problem, works for a few minutes and then back to the same routine. I've tried every setting I know.
What's the use of paying for the fastest internet access and (supposedly) the fastest router if I have to wait 15 seconds each time I visit a website. Frustrating thing is that this sometimes, not always, even happens when I am going back to a page I just visited (back button on the browser).This has to be router issue since it does not happen when my laptop or desktop is plugged directly into the modem. This does not happen to me at work either. It does not happen when I use Cablevision's wireless network in Nassau county.
I find E1200 cannot update its ARP information by received ARP Request which is sent by the wireless station connected to it, although E1200 has reply an correct ARP response to wireless station, and this will cause VoIP drop off when roaming from E1200 to another wireless AP which is bridge to it , so is there any way to enable the ARP request learning funtion of Linksys series?
I'm about fed up with with having this issue that no one can seem to solve. It dates back to when I owned a WRT54G router. I started experiencing random disconnects with the router, both wired and wireless. I only owned the router a year and figured it was going bad.
So I purchased this WRT120N router late August. Soon after I set the router up, low and behold the same problem started. I've called my ISP a couple occasions and they tell me that everything is fine from their end. I've spoken with Linksys tech support on 3 seperate occasions. I have changed the MTU to 3 different values and upgraded the firmware. The 2nd support tech suggested that I do those two things. To my surprise this worked for 2 or 3 weeks with no problem. The same problem started again just last night disconnecting intermittingly. I spoke with another support tech and they suggested that disable the SPI Firewall protection and Anonymous internet request. That did not work for the brief time I had this disabled.
More into the problem, when it disconnects the modem seems fine but the activity light on it stops as it should. The router itself appears to reboot, then when it comes back up the connection restores. What could possibly cause this? I currently have version 1.0.02.This is getting very frustrating and I am getting very near not using Linksys/Cisco products any longer.
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
I would like to set the router's dns entries but I don't see how to do that. Basic setup page has DNS setep for the DHCP scope but I don't want to push dns to my pc's. What I am looking to do is to use an alternate dns to what my service provder pushes and still have the abliity to route on my internal network.
My internet cut out last week and after calling my ISP I found out it was in fact my router that was causing the problem (regular connection to PPOE works fine). I've only had my E2000 about 2-3 months and have not had any problems with it. I've restarted the router, done a factory reset, upgraded the firmware, renewed the IP and still I cannot get any connectivity. I can access the router UI fine and I get a response from pinging it and also I have tried replacing the cables but that didn't fix the problem either.
I have an E2000 that I was given as a gift. I would like to use at it my office for a switch at my cubicle where I can connect 2-3 computers simultaneously. I am in a large network and am a user only. When I hooked the E2000 up today my computers would not get internet access BUT my laptop got wireless access and internet.
I'm using E2000 currently and meet a wireless connection problem. The speed can up to 300M bps. When I confiured the E2000 to band auto (20-40mhz) and my wireless network card to work at also auto (20-40) mode, it always down to 144M speed when connection.
If I changed some settings in E2000's wireless configuration, in the status sheet I can see it works at 40MHZ. But after a while,(5-10 mins) it automaticly down to 20MHZ and my labtop connect only got a 144M speed.
how can I deal with that to make it always keep at 300M connection? Note the previous router I used to connect to my lattop can always keep that speed.
I have a E2000 router that would go out and I would have to unplug and replug in every once in a while. Finally it just stopped working completely. I reset the router and now it won't let me connect. I have followed advice given to soembody else on here and went into router settings and cloned the mac, the IP address was there and reset my security settings. It let me connect to the network but not the internet...