Linksys Wireless Router :: E2500 Or E3200 - Connecting 2 Laptops / 3 Mobile Phones Via WLAN

Dec 13, 2012

I want to install wireless router in my home. It is 200 Square metres. Usb port does not meter for me. I want to connect 2 laptop 3 mobile phone via wlan. Which will be better E2500 or E3200 to cover whole area? P.S my internet speed is 40mbps 

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 / E3200 Or E2500 Better For Home Access Point?

Jan 18, 2012

I am looking form accesspoint for home network. I do not need router and usb functionality, I have this already in my linux server. I need only wifi accesspoint with 2 bands and 300Mbps bandwith. Is there a big difference between E4200 or E3200 or E2500? I know that E4200 supports 450Mbps, but I am not planning to buy new devices which could go faster than 300Mbps. Beside of technical parameters in technical specyfication is there a difference in wifi bandwith or tranmission between wifi and cable network?

View 9 Replies View Related

Linksys Wireless Adapters :: WUSB600N Can't Use 5GHz As Nokia Mobile Phones

Feb 28, 2011

I recently purchased WUSB600N because I want to use the N speed of my WRT320N router. My laptop only has a built-in 802.11g network adapter. Kindly share your insgihtson why I only get 6.5 Mbps using my WUSB600N compared to 18.0Mbps using my builtin 802.11 g network adapter in my laptop? Too bad I can't use 5GHz as Nokia mobile phones that use our wireless connecion are only G capable. Even iPhone 4 cant fully use 5Ghz in 802.11n.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Connecting 2 Android Phones?

Aug 19, 2011

I have an issue with a brand new E4200 router. My E4200 can connect no issue with the following devices: Ipad, AppleTV, Dell Laptop, Ibm Laptop. It is also wired connected to my home PC. Internet works fine and file sharing/network works good for all the above devices.
 
The problem is that My wife and I's Phone can not detect the wifi network and can not connect to it. The SSID broadcast is enabled on both frequencies (2.4 and 5). I have try configuring the network manually on both the Android phones..it does not work.. it records the data but keep sayng the network is out of range (although I'm right next to the router).  I hva eplayed with various channels on both frequecies and played also with the MTU size.One of the Android phone is Garmin the other Acer Liquid...different brand running both Android 2.2...
 
Firmware on E4200 is 1.0.02
All settings reset to Auto/MIxed for now.
WPA2 is enable with security key
SSID is enabled on both frequency
no MAC address filtering is setup
 
Both my phones can detect other networks and can connect fine to friends and family networks...So I suspect a compatibility problem between router an Android..I have contacted Linksys support twice with no avail. I have contacted both Acer and Garmin...they refer me to linksys

View 1 Replies View Related

Linksys Wireless Router :: Connecting USB Printer To E3200?

Apr 1, 2012

I managed to connect my USB printer (and tested ok) through the E3200 router using the Cisco Connect programme on Windows 7.  I note that there was an option for a USB Printer connection in the set-up screen.  
 
When I tried it on the Mac using Mac OSX 10.7.3 and Cisco Connect Ver 1.4, I noted that there was no option for a USB Printer connection.

View 3 Replies View Related

Linksys Wireless Router :: Connecting WAP54G To E2500?

Dec 15, 2011

Is it possible to connect my WAP54G to my new E2500 router?I previously had a WRT54G and had my WAP54G connected to it in AP Client mode.  This enabled me to have internet access on my desktop computer that is located in another room downstairs.I would like to configure my WAP54G to work with my new E2500 router in the same way.

View 2 Replies View Related

Linksys Wireless Router :: E2500 Connecting At Low Speeds

Dec 22, 2011

I recently installed a refurbished E2500 router. The reported speeds I got when hovering over the icon in the system tray ranged from 54 Mbps down to 1.0 Mbps. Also, it would drop, then reestablish, the connection several times per day.I contacted Tech Support via Live Chat, and got a woman who told me it was due to the fact that I'm using the router with an older system that has a wireless-G card (I'll be getting a new system soon).Of course, I thought that was ridiculous, so I called Linksys Tech Support and got a young man who had me reinstall the firmware upgrade (which I had already done when I installed the router). After that, it was good for about 24 hours, then the problems manifested again.I returned the router and ordered a replacement, also refrubished. Again, I upgraded the firmware upon installation. .

View 4 Replies View Related

Linksys Access Point :: E2500 Or E3200 - Best Option To Set Up Wireless With Verizon FiOS?

Dec 7, 2011

I have Verizon FiOs and their provided wireless router does not cover my entire house. There are plenty of dead spots throughout the house (house is 3500sq. ft.)
 
The FiOS comes into the basement so currently I have their router is set up in the basement. I wanted to shut off their FiOS wireless router and use my new E4200 router for wireless coverage. I am pretty sure the E4200 alone will not be able to handle my house. Most of the rooms of the house are already prewired with Ethernet cables. All those wires converge in the same closet in the basement, therefore moving the router is not an option.  I was thinking of putting whichever product you experts recommend in my office which is on the 2nd floor on one side of the house. This room does have Ethernet access. However it is currently at 50-60% signal (with FiOS). My bedroom which is on the opposite side of the house is at 10-20% signal (with FiOS).
 
I am looking to buy something to reach all the deadspots and have WIRED LAN access (if need be in the future). What is my best option? I have researched the RE1000, the WAP610N, and even some of the other routers (E2500 or E3200)  for hours. I am not an expert, and frankly after hours of reading, these technical terms of "range expanding" and "access points" are all sounding synonymous to me. I guess what I need is the range expansion on the same WiFi SSID my E4200 will provide (to cover all areas of my house), as well as an access point for connecting TVs, Xbox, or PCs in the future. 

1) RE1000

2) WAP610N

3) or a router to use as an access point/range expansion combo? E2500 or E3200?
 
Naturally, is the range capability better for Routers or the WAP610N or RE1000?

View 1 Replies View Related

Linksys Wireless Router :: E2500 - Connecting Ipad To Wifi?

Mar 5, 2012

Have set up Router OK. Created Flashdrive EZ
 
How do I connect my IPAD now to WiFi since there is no USB port on my Ipad??

View 1 Replies View Related

Linksys Wireless Router :: Acer One Netbook Not Connecting To E2500?

Aug 6, 2011

I recenlty bought an E2500 router.  I was able to connect 4 of our laptops at home just fine.  But when I tried to connect my Acer One netbook, the "Cisco Connect" loaded up to 25% & then I couldn't connect to the internet.  I've contacted Tech Support & they suggested downloading the latest wireless adapter driver.  I contacted Acer & they said it sounded like a security issue on my netbook.  I was out of warranty so they'd have to charge $150 for tech support. 

View 2 Replies View Related

Linksys Wireless Router :: Connecting Bridge (WET610N) To E2500

Feb 25, 2012

just replaced my WRT54GL with e2500 and i have a problem connecting my bridge (WET610N) to e2500 router, it connects fine, but no internet when i connect the bridge to another PC (bidrge says it's connected and got IP), same story with another router (WRT54GL) i connect it with the wire to the e2500 than connect to that router with wi fi and OOPS no internet when i connect to e2500 directly with laptop, iphone etc i have the internet connection, but when i connect the bridge or another router i get no internet looks like E2500 does not let the internet pass throught the bridge or other router.

View 3 Replies View Related

Linksys Wireless Router :: Difficulties Connecting To E2500 With Some Devices

Jan 9, 2012

Just replaced a long-serving WRT54GS with an E2500 to gain a single feature… DHCP reservations for a bunch of web cams around my home. So far, the owner/user-experience with the 2500 has not been as positive as it was for the 54 or any of it's predecessors here and at my business. They just worked when you set them up, and once set up, they stayed set up. Zero futzing around with details. Some issues I'm seeking more expert input on:
 
My Panasonic Viera DVD/blueray player can access the web. Worked fine on the 54… access "Network" and 50% of the time it would join the network then and the other 50% of the time, you had to try a second time which I presume was the time it took for the device to gain access to the network. With the 2500, you can't ever (so far) get on by selecting "Network"… you have to go into the sub menu and have it dwell in the Network menu where it appears to make an ongoing effort to get onto the network. About 30% of the time, you get on… the other 70% no joy.My HP wireless printer will join the network if you dive into its menu system and tell it to look for the network. However, sitting at any of the computers on the network, you can't "get the printer's attention"… it just doesn't join and the print fails. You go over and use the printer's menu manually to get it on and it stays on for a short time, but it soon quits and that's the ball game.My Google Nexus One phone is a slightly different experience… it goes off the network as soon as you shut the screen down but, it seems like it comes back when you turn it on. With the 54, it seemingly remained in touch with the network better… things came in over the net while it was in my pocket. So, works better than the other two but I don't see why it goes away when on the 54 router, it didn't seem to. 

In case it matters, this system is set up with DHCP, WPA2/personal and MAC filtering as was the case on the router(s) it is replacing. UPnP has been disabled. On 1.0.03 of the firmware. There are 6 DHCP reservations which also receive port forwards. I have adjusted the Beacon Interval, Frag threshold and RTS threshold for both frequencies and the MTU, all in accordance with recommendations under the support area for this site. Since everything worked well for both the 54 and its predecessor, I have to believe it's the 2500 that's the problem.

View 3 Replies View Related

Linksys Wireless Router :: E2500 - Getting Fraction Of Speed By Connecting Without It

Aug 19, 2011

I just bought an E2500 router, and am only getting a fraction of the speed I do by connecting without it. Both wireless and wired through the router I'm getting about 1 mbps, while without it I'm getting about 10 mbps.
 
I do live in an apartment, so I'd understand if there were some wireless interference going on, but would that explain away the wired issues too? I've also tried changing the channel (though only of the 2.4 GHz connection), and that's not working any. 

View 9 Replies View Related

Linksys Wireless Router :: Connecting E2500 / Modem Combo?

Jul 19, 2012

I have a Linksys E2500 and I'm trying to connect it to my ISP provided router (Actiontec V1000H) because I wanted better range and consistent connectivity for my 6+ wireless devices.My problem is that, to make this work, I connected an Ethernet cable from the E2500's yellow internet port to one of my V1000H's LAN ports. This, however, did not give me access to the internet even though the network for my E2500 was available in the network list and selected as the default network. I then had to go the the advanced settings of the E2500, and changed the router IP address from 192.168.1.1 to 192.168.2.2. This granted me internet access.However, everyone i've talked to including coworkers and experts at dslreports said that, because of what I've done I've set up a double NAT with 2 potentially conflicting IP addresses, and down the road weird issues will arise because of it. They also suggested I connect the E2500 to a dedicated modem to avoid this problem. However, the dedicated modem I was sent was faulty and did not allow internet access even through the ethernet connection. So, until I get a new dedicated modem, I have to use the router/modem combo.What should I do? Should I set up the E2500 as just a wireless access point for my existing router/modem combo? What do I need to edit in the advanced settings?

View 6 Replies View Related

Linksys Wireless Router :: E2500 2.4Ghz Won't Connecting At 5GHZ Frequency

Feb 23, 2013

On my dual band E2500, I have both the 2.4 and 5 GHZ enabled. I have a fairly new HP with an N wireless card but I cannot get it to connect at the 5GHZ frequency. The only computer that will connect at the speed is my wife's with an external Cisco wireless card. What the settings should be on the PC in order to get it to connect at the higher frequency?

View 4 Replies View Related

Linksys Wireless Router :: Connecting A Telus Modem And Cisco E2500

Jul 18, 2012

Where I work, we have four computers connected on a network with a Telus combination router and modem (I should probably also mention that two of the computers are connected to a switch which is then connected to the Telus modem/router because that is how the previous tenants set it up) . Recently, my boss wanted to have two different wi-fis, one as a guest wireless and a password one for the employees so he bought a Cisco E2500. I set up the second router as a wireless access point, but eventually we started getting problems with IP conflicts which started messing with the work group connections.
 
How I'd go about setting up the E2500 properly so that there are no problems like I've been having (having to reset the modem/router constantly for the internet to work, computers being assigned different IP addresses and problems connecting to the server over the workgroup network).

View 1 Replies View Related

How To Connect Wifi On Mobile Phones

Nov 4, 2012

how to connect wifi on mobile phone? how it works? my handset is LG T310i having wifi facility

View 1 Replies View Related

Wifi Password Cracking For Htc Mobile Phones

Jun 25, 2011

I have an HTC INSPIRE cellphone and I would like to get free Wi-first wherever I go.

View 3 Replies View Related

Cisco :: Mobile Phones Can't Get Internet Access Through WLC4402

Feb 20, 2012

I have a WLC 4402 on my network.  Recently mobile phones can connect to the wireless network and obtain a valid IP address.  This IP is pingable from a workstation anywhere else on the network.  However, these phones will not display web pages.  They come up page cannot be displayed.  I even tried putting Google's IP address in the phone's browser and it still did not display.  I can connect through the same WLAN via a laptop or iPad.  These devices have no problem displaying web pages.  I even went ahead and created a new TESTWLAN with no encyption but to no avail.  Same results:  laptops connect and display web pages and smart phones connect, gain IP but do not display web pages.  Comes up page cannot be displayed.  This matters not whether its an iPhone or Android platform.

View 8 Replies View Related

Netgear WGR614v9 - Connecting 3G Mobile Broadband To Wireless Router

Mar 18, 2011

I've got an Optus (in Australia, so 3G mobile broadband is all that matters I would think) that I'm trying to connect to a Netgear WGR614v9 wireless router. So the 3g mobile plugs into usb on computer; the router to the ethernet card on computer.

I know; I could buy one that has it in one package, but we're throwing the router out from work anyway. If this works my daughter will be thrilled with her iPod more is all :)

I've got the mobile broadband on, and plugged in the router and Windows 7 makes a second network connection automatically for the router, though with no internet access, and the setup wizard in the router claims to have no access to the internet. (though clearly I'm posting...lol).

We can see the Wireless signals on devices and can connect to the router but then the devices say no internet access when you actually try to access the web, like the router wizard does. and yet, we are online

View 2 Replies View Related

Connect Laptops To Internet Through Mobile Wifi?

Dec 17, 2011

I have a laptop but i live in an apartment where there are Wi-FI signal but they are only reachable when i put my laptop on my window ,but I have a mobile with Wifi and it can hack some wifi which are un secured ?how can i connect to internet on my laptop using my mobile wifi !

View 1 Replies View Related

Connecting Two Laptops Via Router With Different Operating Systems?

Jan 3, 2012

I'm adding a router to my existing Win XP Home laptop in order to communicate with a new Dell Inspiron Win 7 laptop and want to be able to access the internet from both. My Netgear Router is setup and working and both laptops recognize the net. How do I get the Win 7 unit to access the net and e-mail?

I use Windstream as my ISP but I use AOL for e-mail. Am I trying to do something that cannot be done?

View 1 Replies View Related

Dell 1397 WLAN - PC Gets Disconnected From Wireless Router After Connecting Laptop

Apr 13, 2013

I have a Dell Inspiron Laptop with Windows 7 and a PC with XP. The Laptop has Dell Wireless 1397 WLAN mini-card, i think it supports 802.11g. My PC has DLINK DWA 525 PCI WIRELESS card, this supports 802.11g and n. The wireless router is Belkin Surf Wireless Router (F7D2301zb).

Now, the problem i'm facing is when PC is connected first and later when laptop is connected, the computer gets disconnected. Laptop works fine. I have to restart the router to connect both.

Is it due to the difference in 802.11 G and N of Laptop and PC ?

View 1 Replies View Related

Wireless :: Connecting Internet To Two Laptops Via Bluetooth?

Sep 27, 2011

connect internet to two laptops via Bluetooth?

View 2 Replies View Related

Cisco :: 1130 Laptops Dropping On And Off WLAN While Sat On Peoples Desks Not Roaming Anywhere

Jan 10, 2011

I'm fairly new to the whole Cisco WLC system so this may be a more simple question than I realise.We are having an issue with some laptops dropping on and off the WLAN while sat on peoples desks not roaming anywhere.  I can see that some APs have Load profile failed.  Looking in the docs is says that client density may have been exceeded.  The AP in question has 12 clients attached however I read that the 1130's should be able to handle 24 clients.  Is there a setting on the WLC that limits each AP to 12 users? Also is there a way to identify the AP by making its light flash for example via the WLC?

View 3 Replies View Related

Linksys Access Point :: E2500 Obtaining IP Address Timing Out While Connecting

Dec 5, 2011

I have a E2500 router and 3 WAP610N access points.  Users are having a difficult time connecting to the AP's.  The client device just sits there trying to obtain an IP and then times out.  If they get within range of the actual wireless router, then connect instantly.  Is there a setting to increase that will allow longer time trying to obtain an IP?
 
I am using the same SSID for roaming, but am using different channels (1, 6, 11) for the overlap.  See diagram below.  Not sure if this has some impact?

View 4 Replies View Related

Linksys Wireless Router :: EA3500 Phones Connect To Wi-Fi But Cannot Sens / Receive Data

Feb 3, 2013

My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it.  The phones work completely fine elsewhere.  Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again.  Now it is constantly.  I restarted the modem, default reset it and still nothing.  I get an IP address too and it stays connected.  Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.

View 7 Replies View Related

WLAN Card Not Connecting To Router

Mar 30, 2011

Have Dell 6400, run Win XP serv. pack 3. No red X or yellow ! under Device Manager. I did open up laptop, took out WLAN card, restarted laptop, turned off laptop, reinstalled WLAN card, restarted laptop.

[code]...

View 14 Replies View Related

Linksys Wireless Router :: E1000 Hung Up All Cordless Phones And Turned Off Cell Phone

Apr 21, 2010

I'm having an issue with my work laptop. I'm just setting up a wireless connection for the first time. I bought the Linksys E1000. I have used this laptop at work and at hotels for a 54 MbPS connection. I set up the Linksys at home. It sees the network and will tell me that it is connection at 54 MbPS. Then it quickly goes down to 11 then 5.5 then 2. Eventually it runs so slow that I time out of the security portal at work because its so slow. Occasionally it even loses the network and has to find it again. I'm only about 20 feet away from where the router is located. I have hung up all cordless phones and turned off my cell phone.

View 2 Replies View Related

Linksys Wireless Router :: How To Optimize WRT54GS For Laptops

Oct 20, 2011

I have a WRT54GS v. 7.0 w/ the latest firmware. Im looking for ways to optimize the router for best performance.There are 4-5 iphones/ipads that will connect to it. 3-5 laptopsand one xboxNo wired connections.Im using COX internet on the west coast which provides good internet service. Im not an expert with networks or routers but i follow instructions real well. What can i do to my stock/default router to take 100% advantage of its capabilities?

View 2 Replies View Related

Linksys Wireless Router :: WRT160N Can't Connect With Laptops

May 31, 2008

I have two computers on hard line and two laptops. All computers on the line work fine and flawlessly. But when I try to connect the laptops to the computer, they say there's a problem with the certificate. Both detect the connection, and with strong enough signal strength. I've tried WPA and WEP encryption methods, and disabling encryption methods. All had no change. I believe the problem lies with this Wi-Fi Protected Setup stuff, which I have no clue as to what the hell it's supposed to do. I've tried disabling it by turning it to manual, which all computers then lose internet connection entirely. Browsing the FAQ's, I havn't found a solution. I've been working on this thing for a solid 7 and a half hours straight, and phone support is trying to make me configure static IPs, which proved extremely inconvenient in the past.

View 9 Replies View Related

Linksys Wireless Router :: E2000 Possible To Go Online With Two Laptops?

Nov 4, 2011

I have a Linky E2000 and i´m having problems connecting laptops. My laptop is working fine but my girlfriends just wont work. I have a modem for internet and from there a networkcable is plugged in my Linky E2000. I´ve installed the router on my laptop with the following disc. I can go online wireless but my girlfriend can´t. Is it possible to go online wireless with two laptops?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Drive Not Seen On Xp Laptops?

Mar 12, 2012

I just purchased an E4200, primarily to connect my Free Agent drive to for network access.  The router has V. 2.0.36 installed, drive is fully shared, but I am unable to see the drive when I attempt to map it on any of my XP laptops.  When I perform discovery, it finds the router, but is unable to see the drive.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved