Linksys Wireless Router :: E3000 - Way To Set Up Security Mode Setting?

Feb 14, 2013

I have an E3000 router guest access set up via CD.  Is is possible to set up a Security Mode setting on this rather than it being open to all. I cannot find anything for Admin to set this up, it seems a glitch in security?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Cisco E3000 Setting QoS For HD Video?

Jan 30, 2012

How do i must to set QoS for optimal streaming HD Video (from NAS to Media player)? Here is E3000 QoS options:

View 1 Replies View Related

Linksys Wireless Router :: E3000 / Setting Up Guest Network?

Feb 18, 2013

I just installed and started using my E3000. Love it so far but I have a question about the guest network. I did set one up with a network name and password. It does show up under available networks but as an unsecured one. How do I go about securing it?

View 2 Replies View Related

Linksys Wireless Router :: E3000 Lost Connectivity When Go Into Sleep Mode

Apr 1, 2010

I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?

View 9 Replies View Related

Linksys Wireless Router :: Running E3000 In Client Bridge Mode?

Dec 19, 2011

I have replaced my main router WRT300N running dd-wrt with the a stock E4200 and an old WRT54G aslo running dd-wrt configured for wireless client bridge. Now that I'm learning more about 802.11N, I was wondering what client can I use to achieve 5ghz simultaneously radio transmission since my current setup cannot do this in the 5ghz band. Can the E3000 be ran in wireless client bridge mode, if not what product can provide this? On the other thought am I understanding MIMO?
 
Old setup: 802.11G 2.4ghz
WRT54G ))) ((( WRT300N ->ISP
 
Current Setup: 802.11N 2.4ghz MIMO?
WRT300N ))) ((( E4200 ->ISP
 
Wanted Setup: 802.11N 5ghz MIMO
( E4200 ->ISP)

View 3 Replies View Related

Linksys Wireless Router :: Difference Between E3000 Repeater And Client Bridge Mode

Jul 5, 2011

Who knows the best version (DD-WRT or other) to repeat the wireless signal with a E3000?At worst, a client bridge mode could be sufficient for my needs...

View 9 Replies View Related

Linksys Wireless Router :: Can't Change Security Mode On WRT54G

Dec 28, 2008

I'm trying to change the wireless security mode on my folks' WRT54G to see if I can get the wireless adapter on their new TIVO to talk to the router.  It looks like TIVO only does WEP, not WPA.  I get into the wireless page of the router and when I try selecting anything but "WPA Personal", the selected choice flips back to "WPA Personal" in less than a second.  I've updated the firmware but no change.

View 9 Replies View Related

Linksys Wireless Router :: Can't Change Security Mode From Disabled

Aug 30, 2012

Trying to secure Linksys WRT54G V8 wireless router. Can't change security mode from 'Disabled'!?

I followed this Post from EXPERT: "Connecting two routers wired - the definitive answer"
 
[url]...
 
I got the two routers working but the second one (not using it as a router) is not allowing me to change security mode from "disable" to WEP or anything else.The following Post didn't answered this issue: "Can't change wireless Security Mode on my WRT54G V5"

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Security Mode Change

Jul 22, 2012

My WRT54G Router has been reset after severe weather conditions, the wireless in now unsecure. I am trying to change it back to secure mode under wireless / security wireless, but it does not allow me to do so. The security mode remains disabled and does not change to WEP or WPA.

View 2 Replies View Related

Linksys Wireless Router :: E1200 Setting Disabled As Selection For Security

Apr 1, 2012

This problem is on a Cisco E1200 (FW: 1.0.03) and using a browser to modify the routers settings.I'm connected to the router from a wired connection, and I'm trying to turn off the encryption, and just have the router have the setting "disabled" as the selection for "Wireless Security".
 
However, it seems when I do this, the moment I press "Save" the router gets disconnected from my computer (the wired connection) and the only way to get reconnected is to run the Cisco Connect software from the computer that's hard wired to the router.
 
Once I get back to that screen in the routers settings, and try it again, the same thing happens.If I change anything else under the routers settings, the connection stays connected, but only when I change the wireless security settings to disabled I see this problem.

View 1 Replies View Related

Linksys Cable / DSL :: Wag120n Modem Router Wireless Security Setting?

Jan 14, 2012

I am using wag120n modem router but is confused  abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
 
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?

View 2 Replies View Related

Linksys Wireless Router :: Setting Up Wifi Security To Access Wrt54gl?

Jun 7, 2011

setting up my new WRT54GL.this is my first encounter with a wireless router, though I've had 3 previous Linksys (hardwired) routers.I have to say, given that they give virtually no Mac support, it was a breeze….just plugged it in to my cable modem and my laptop and - boom - on the net on my first try!I'm able to access the router via it's web-based system and can now "tweak" with settings, but I'm running in to a lot of "tweakable" settings that I'm not familiar with.

First my setup. I have; (a.) 3 desktop Macs and a Samsung TV hardwired to the four Ethernet ports and (b.) my Mac laptop accessing the router via Airport Extreme wifi. All are happily accessing the web.But I realize that the reason that "(b.)" is accessing the web is that I've changed no default settings in the router and, not only can *I* access the router via wifi, but probably anyone driving down the road or sitting out in front of my house can access the web via my wifi. And I'd like to change that.I'm *guessing* that the router settings i need to change lie in the "Wireless Security" area of the router? And it's here that I'm running in to a lot of "tweakable" settings that I don't understand.But let me give an example of what I would *like* to accomplish.

Let's say that there are 3 different laptops…."A", "B" and "C". All 3 are Macs and running Airport Extreme.Now, "A" is my laptop, sitting here on my desk next to the router. As i leave Airport always turned on, I want "A" to *always* have access to the routers wifi *without* having to enter a username/password, i.e. when i turn "A" on, it's wired.Now "B" might be the laptop of a friend who happens by the house and need access. They would need to find my network on their laptop and then i would need to give them a password to let them get on .And finally, "C" is the guy I don't know out in the street whom I want to *never* have access to my network.So my question then is, can I accomplish this by changing settings in "Wireless Security" on my router and how/what would I change?

View 9 Replies View Related

Linksys Wireless Router :: E1000 Router Come With Default Security Setting Upon Installation Using Supplied CD?

Apr 25, 2011

Does the E1000 router come with a default security setting upon installation using the supplied CD?

View 9 Replies View Related

Cisco Wireless :: E3000 No Clear Access Point Mode Option

May 26, 2010

I recently purchased the E3000.I thought i had read that this devices can act as an access point. There is no clear "access point" mode option so i configured it as best as i could to work with our radius server. I can connect to the wireless with radius credentials just fine but i don't get assigned a ip address from dhcp. I tried using an old blekin that does have ap mode and it works just fine.

View 1 Replies View Related

Cisco Routers :: Setting The RV042G To Router Mode?

Feb 20, 2013

Is there documentation on setting the RV042G to Router Mode and what that changes to it's topography?  The manual simply tells us to click the button to change the mode?!?!? A 4th grader could figure that out - but what does it do to the unit?  Does it basically become a glorified switch with an internet connection?  Can the 2nd WAN port be used as a switch node? 

View 7 Replies View Related

Cisco Routers :: Is There Documentation On Setting RV042G To Router Mode

Feb 21, 2013

Is there documentation on setting the RV042G to Router Mode and what that changes to it's topography?  The manual simply tells us to click the button to change the mode?!?!? A 4th grader could figure that out - but what does it do to the unit?  Does it basically become a glorified switch with an internet connection?  Can the 2nd WAN port be used as a switch node? 

View 1 Replies View Related

Linksys Wireless Router :: E3000 FTP Not Seen On The WAN

Apr 22, 2012

I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
  
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
 
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
 
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?

View 2 Replies View Related

Linksys Wireless Router :: How To Get Most Out Of E3000

Jun 29, 2011

I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.

View 9 Replies View Related

Linksys Wireless Router :: E3000 No Address From ISP On WAN?

Apr 2, 2012

I have an e3000 that cannot obtain an address from the ISP.  I can get an address on the computer and an old router by directly connecting the cable to the computer or the router.  I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router.  I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work.  It worked fine on Saturday until a bolt of lightning hit close to the house.  Since then, I cannot get the e3000 to connect to the ISP.  

View 9 Replies View Related

Linksys Wireless Router :: Set Up E3000 For ATT U-verse?

Jul 11, 2011

How do you set up the E3000 for ATT u-verse?

View 2 Replies View Related

Linksys Wireless Router :: Way To Install E3000

May 9, 2012

install linksys e3000.

View 1 Replies View Related

Linksys Wireless Router :: Restore Ver.1.0.04 On E3000?

Oct 26, 2012

I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Override Only DNS From ISP

Nov 3, 2012

I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Gets Slow After A While

Feb 17, 2011

It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow.  And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes).  But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Cannot Keep Signal

Aug 21, 2011

We have  a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works  , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..

View 5 Replies View Related

Linksys Wireless Router :: Testing QoS On New E3000

Apr 19, 2010

Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application. 
 
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net).  As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.  

View 9 Replies View Related

Linksys Wireless Router :: Use Internet With E3000?

May 18, 2011

just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?

View 6 Replies View Related

Linksys Wireless Router :: Lost Cd For E3000?

Aug 17, 2012

I lost my cd for my router e3000 any way still to use it?

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Wi-Fi Not Working

Oct 20, 2010

I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.

View 2 Replies View Related

Linksys Wireless Router :: E3000 - How To Get It Working

Aug 25, 2011

Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?

View 2 Replies View Related

Find Security Key For Wireless Setting

Aug 27, 2011

Trying to find security key for wireless setting

View 1 Replies View Related

Linksys E3000 Wireless-N Router Slow Speed?

Feb 25, 2011

I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.

1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?

2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?

View 2 Replies View Related

Linksys Wireless Router :: Upgrade From WRT52G To E3000?

Jun 5, 2012

Want to switch to dualband E3000 from older, working fine except needs resetting often.  What steps do I need to take?  I do not have E3000 setup disk.  I fear that I will go down a path that makes both of the routers unusable, at least down many hours.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved