Linksys Wireless Router :: E3200 Drops Connections After Firmware Upgrade?
Jun 5, 2012
I have a E3200 and upgraded the firmware last weekend to 1.0.0.4 and now I get dropped connections every few minutes. I was working form home and VPN into a west coast client and was getting dosconnected every few minutes so I thought it was possibly their VPN but when I checked my outloook it was also disconnected and is not associated with their VPN. I called Comcast and they said the modem has been online for 19 days so now everything points to the router.
View 5 Replies
ADVERTISEMENT
Jul 4, 2012
I got an E3200-RM (refurbished).
I did not do a MAC Address Clone, when I connected it I just called my ISP and they enabled it. Internet connection with all devices right there, no problem.
Problem started next day, every day I have to do a hard reset because when I wake up I have no connection with all devices (1 Ipad, 2 Iphones, 2 PCs, 1 Xbox 360, 1 PS3): My SSID is seen on the network but no device can connect to it.
I changed the Channels to manual as said on other threads, but didn't work.
In addition to that, when I try connecting my PC with the ethernet cable to the router -instead of wireless-, I have no internet connection on the PC and any other device that I try to reconnect to the router wirelessly can't connect anymore (have to do a hard reset again and unplug the ethernet cable).
the WRT54G worked perfectly for me...
View 6 Replies
View Related
Jul 17, 2012
We recently purchased a Linksys E3200 router, because our old router didn't take advantage of our internet speed. The router works fine, though the internet speeds again isn't as much as expected.
With a wired connection, we only get 80 Mbit/s of our full 120 Mbit/s, according to Speedtest.net. The Cisco Connect built-in speed test is even worse; only 40 Mbit/s. When we directly plug the computer into the modem, we get the full 120 Mbit/s, which indicates that the modem does have the connection speed. The router just doesn't give it to the computers attached.
I don't know about my wireless speed, as my wireless card in the laptop clearly is the bottleneck (it can only connect at 65 Mbit/s). Atheros AR9285 ftw.
We tried different cables, the one included with the router gives the same speed.
View 9 Replies
View Related
Mar 7, 2012
Got a Linksys E3200, and a gigabit card, even two, Realtec and Intel, have a connection ggbit. If the power cord plug directly into netcard, all at great, the tracker up to 80 MB per second, shakes on speedtest.net, shows 780 240 + Mbps. When i connect my inet through the router, the speed drops to 12 MB(100 Mbit) and speedtest the same, but in the the web interface in the statistics shows that everything is connected to a gigabit.
Plus, when I ping my ISP's website (ip -t ) and assume [URL] click on the test, the router with 1ms pings are beginning to rise to 30 ms, and when it is directly in netcard, it stable 1ms.... When through the router, torrent shake it just do up to 100ms jumps. I have all the settings , and set up his hands, and a manager, all for nothing. It started five days ago, before that everything was ok. Can a router burn? Rather it gigabit controller?
View 4 Replies
View Related
Feb 1, 2013
Running Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications), in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200. Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity. Things I have done to date: removed Linksys E-series software and reloaded, updated drivers, changed all wiring to router, and checked IP addresses and they are different.
View 2 Replies
View Related
Oct 13, 2012
what the latest firmware is for the E3200? The version i'm running at the moment is 1.0.03. Also how do i download the new version?
View 1 Replies
View Related
Nov 13, 2012
I just upgraded my router from 1.0.03 to 1.0.04, I have a few questions:After installing the firmware, I pressed the reset button at the back for almost 1mn, the power lighted as expected, I then unplug the power cord for 30 sec.The strange thing is that this did not lead to a reset of the configuration, all my settings are still here...!But the actual problem is that my internet speed is divided by two, I still have to confirm this observation on the long term.
View 1 Replies
View Related
Dec 11, 2012
I want to block [URL] from Firmware parental control. But it does NOT work. It works on http site but not the https site.
E3200 Firmware
05/17/2012
Ver.1.0.04 (Build 1)
View 9 Replies
View Related
Aug 26, 2012
I recently bought a refurbished E1000 wireless router from Amazon, and from the first day I've had recurring connection issues with it. Every half hour or so it will lose all of its connections (wireless and ethernet) and requires a hard reset. After resetting, all connections are good for a little while but then the problem occurs again. When plugged directly into my modem (Motorola SB6121), my internet access is completely fine.
The router has the latest firmware as far as I know (2.1.02 build 5 May 6, 2011), and I've tried to change several settings (MTU to 1400, Fragmentation Threshold to 2306, etc) but to no avail.
View 4 Replies
View Related
Sep 5, 2011
My E4200 seems to be dropping connections throughout the day. For wireless it'll still show full signal and connection, but there will be no internet activity for about a minute. Then after a minute things will work just fine again. For wired I notice it in my XBox mainly when I get dropped from games as constant as the wireless drops.I believe my modem isn't the problem since the old router never dropped connections on the hard wired devices. Occasionally my old D-Link router would drop wireless, but never this frequent,I am running 1.0.02. I've rebooted the router/modem several times. I even reinstalled the entire setup with the current version of Cisco Connect as the tech person suggested, but still no luck. The first week or so using this router was flawless, but ever since then it's been dropping connections several times throughout the day to any device connected (wireless or wired). The problem seems that the router just hiccups the connection very quickly, so quickly that Windows doesn't even recognize the connection has been lost, but long enough to drop a multiplayer game on XBox or to have me mashing refresh on my internet browsers.
View 2 Replies
View Related
Jun 29, 2012
Router is connected to my ISP with the option Keep alive and redial value of 20 seconds (the lowest i can set). There are two distinct problems: Router drops connections at random intervals. It can happen once a day or several times a day. It always happens overnight (so every morning it isn't connected). This doesn't seem to be related to ISP as direct connection to computer is stable.The Keep alive option isn't working. When it drops connection it isn't trying to re-eastablish it for at least 2 minutes (the longest i have waited so far, 6 times the redial value configured). Producing external traffic (e.g. constant pinging of some host by IP address, refreshing some web page) doesn't work. When i log on to admin console (browser based) simply clicking connect button brings connection back online. I've even been looking at status page constantly refreshing to see if it ever made a single attempt and it appears it didn't.I did my "homework" before posting (upgraded FW to 2.0.02 build 3, finetuned MTU).
View 2 Replies
View Related
Sep 2, 2011
The router works fine until I plug the 4th wire in the back, which goes to a 2nd desktop computer, then it is only a matter of time until the router drops all internet connections including the direct wire to desktop #1, wireless, and the other two wires.This is my 2nd e2000 router since Amazon replaced the first one after about 4 months as it was having the same problem.
View 5 Replies
View Related
Mar 25, 2007
I would like to upgrade the firmware for my WRT54GS V2.1 router however, I only see versions 1.0, 1.1, 2.0, 3.0, etc.. There is no 2.1 listed, so does this mean I can use the v2.0 firmware?
View 3 Replies
View Related
Aug 4, 2012
I just purchased a new E1200 router with firmware version 2.0.01 and downloaded the latest version 2.0.03 and tried to install it through the router. When I choose the downloaded file and try to start upgrade I immediately get an error "The Image File is Incorrect". I redownloaded it and tried again with the same error. how to get past this and upgrade the firmware?
View 9 Replies
View Related
Oct 18, 2012
The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).
View 2 Replies
View Related
Feb 24, 2013
I tried to upgrade my router firmware to the latest 2.1.39.145204 (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on 192.168.1.1, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?
View 9 Replies
View Related
Apr 17, 2013
[code]...
This is new EA6500 and The firsttime Setup My EA6500，Download New Ver Linksys Smart Wi-Fi Router Setup,he say Your router was not successfully set up.
View 2 Replies
View Related
Jul 2, 2012
I currently have Model name: Linksys E4200 Firmware version: 1.0.04 build 11 Software version: 1.4.12100.0
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.
View 2 Replies
View Related
Jul 27, 2008
I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".
View 9 Replies
View Related
Jul 31, 2011
I had issues with my router incorrectly resolving URLs. For example, going to facebook.com would gtive me a "wiki does not exist" message. Pinging facebook.com would give me an IP that belongs to wikipedia. The answer was SUPPOSED to be upgrading to v3.0.03.I upgraded and now my router WILL NOT connect to my DSL modem. Oh, it says it's connected and shows the correct IP address for my DSL modem but the gateway is showing 0.0.0.0. Direct connection to my PC works just fine.I have cycled the power on both the router and the DSL modem several times. The DSL modem is working just fine. I have done several IP release/renew on the router. I have reset the router. To no avail. This firmware update (which completed successfully) seems to have killed my routers ability to communitcate with the internet.
View 4 Replies
View Related
Jan 1, 2013
When I attempt to upgrade the firmware, I receive error code 0x82BF010E. It wont allow me to complete the firmware upgrade on my Mac OS X (10.7.5)
View 3 Replies
View Related
Jun 16, 2011
PS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?
View 9 Replies
View Related
Dec 22, 2011
My Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab
View 2 Replies
View Related
Feb 10, 2012
I am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?
View 2 Replies
View Related
Aug 24, 2012
I have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle. Checked the information again and everything on the router setup completely disappeared.
View 8 Replies
View Related
Jan 9, 2012
There is no “firmware” number after the model and I believe this router has never had a firmware upgrade. However, if I try to download any of the 3 upgrades from the Linksys support site I get the message “firmware not available, sorry for the inconvenience.” Since the suggested solutions to so many problems posted in the forum is to first upgrade the firmware, I find this response with no explanation quite annoying. I am having problems replacing my current hardwired Linksys two port router with the WRK54G wireless 4-port router. Questions regarding that problem I will post under a different topic. For now, how I can get the firmware upgrade for the WRK54G?
View 5 Replies
View Related
Mar 10, 2013
I have tried to upgrade the firmware to the latest greatest but keep getting the "Incorrect image file" error. I bought two of the V1 units and had no trouble with one of them but the other is frustrating me. I have reset it and even tried a tftp upgrade of the firmware but still get "Incorrect image file" even in tftp.
View 1 Replies
View Related
Jan 8, 2013
Having problems losing connectivity so decided to upgrade firmware from v1.00.7 to latest version available.
Downloaded the upgrade file and log into web based administrator. Select file and click on UPGRADE button. A couple of clicks on timeline then: UGRADE FAILED
View 5 Replies
View Related
Aug 24, 2012
I have an E3000 with firmware v. 1.0.01 build 6. I am trying to upgrade to the latest firmware version. I downloaded the file, and when I went to install from the web page I got the error message: Not enough memory available. I tried from 2 computers and got the same message.
View 6 Replies
View Related
Jan 22, 2012
Firmware downloaded, FW_WRT120N_1.0.06.001_US after pressing APPLY nothing happens after few minutes it says. "There is an error in the Content-type field. Click the Back button to return to the previous page and re-enter the information."
View 2 Replies
View Related
Nov 24, 2011
I have an old wrt54g (version 2) which I just downloaded and installed the latest firmware (4.21.4) and now its dead!!!!
factory reset does nothing, cannot connect via a wired connection, nothing. All the lights work fine.
View 4 Replies
View Related
Sep 14, 2010
I was prompted by Cisco Connect to upgrade the router software. During this process it came back and said the update failed. At this time the network connection dropped. The power light is now flashing on the device.
View 9 Replies
View Related
Oct 20, 2007
When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
View 4 Replies
View Related
