Linksys Wireless Router :: E4200 Can't See Network Shares After Upgrade

Apr 21, 2012

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.I did downgraded the firmware back to .01 but still no network .

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Suddenly Lost Network Shares?

Mar 6, 2013

Up until 2 days ago I've had no problems with my v1 running 1.0.05. I was copying something to my drive and the connection became non-existent. Going into the menus it shows my drive as having full capacity available. Well i konw thats not true. i unplugged it and directly connected it to a PC. All of my info was there. I connected it back to the router and nothing. No shares of any sorts. It shows it detected the drive. Does not show USB speed and does not allow you to create new shares.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Drops Network Shares WDTV Streaming

Jan 3, 2013

Basically I use the WDTV to stream movies from my PC and external harddrive (which is plugged straight into the router) to my TV. The WDTV has a "Network Shares" section and my PC and harddrive usually appear here.
 
The only way I can get them to show is to reboot the router each time I want to use the WDTV player.
 
Is there a setting on the router which I need to enable/disable which will prevent the network shares drop?

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Access Shares?

Sep 18, 2011

 Upon attaching my external storage I was able to create a share, copy files and access it successfully from everywhere. Now when I attempt to add an additional share, the router lets me create it  but when I try to move access groups over from the available groups, the >> buttons are greyed out. The one working share has the admin and Everyone groups with access. Any additional share I create has the admin group in it by default, but I can't add any more groups. I am logged into the router as admin and logged into the pc as a local admin.  I am also unable to change the rights from my pc on a share (access denied).  I AM, however, able to map a drive to a new share successfully, but when I copy files over, a few minutes later the filenames are there but they show up as 0 byte files.

View 7 Replies View Related

Linksys Wireless Router :: Tv Losing Network After Upgrade To E4200

Mar 15, 2013

I was using a netgear wndr 3400 and my network stream never failed. i bought a e4200 v2 and my tv loses streaming capabilities after about 10 to 15 minutes.i have to turn it off to get them back and then it does it again in 15 minutes. i know it is not the tv it wprked fine before the new router. 

View 5 Replies View Related

Linksys Wireless Router :: Can't Access Network Shares With E3000

Apr 19, 2010

I replaced my old Linksys WRT54G wireless router with the new E3000 wireless router. The installation was a breeze, but not what followed henceforth. I was able to access the internet on my wireless desktop/laptop/Netflix ROKU player/WD TV live media player, but lost access to all the network shares. I spent a lot of useless time with Linksys chat support and phone support, where they said their responsibility is only getting the internet working. They said they are not responsible for file and printer sharing issues, and suggested I use a third-party paid support package to resolve my issues. Over and above spending a hefty amount for the lates top of the line E3000 router, I was not going to shell out additional money for support.
 
Thinking that it could probably be due to some Windows XP firewall/anti-virus (McAfee) issues, I disconnected the E3000 and connected the old WRT54G back again. Lo and behold, everything started working fine again. I could access the shared folders of my desktop (to which my router is attached) and printer, from the wireless laptop/desktop/media player just as before without any problems. I then switched back to the E3000 and lost the shares again. So I have come to the conclusion, there is definitely some setting within the E3000 that is preventing the file and printer sharing. I just can't figure out what it could be, and am at a point of returning it back to the store as defective. The extra N-speed is useless to me if my devices can't access the network shared content.Also, I tried to set up the UPnP media server feature of the E3000 by attaching USB storage and configuring it via the Linksys web based utility, but my media player is unable to access the content.

View 9 Replies View Related

Linksys Wireless Router :: E3000 - Can't View Network Shares Via Wifi

Feb 28, 2012

I've recently upgraded my home network and now my wdtv can't connect to my shared hdd's on my pc for streaming purposes.  Previously I had some piece of **bleep** G router/modem combo from Verizon and I didn't have any problems accessing my network shares, I did have a streaming problem with some .mkv's because the signal was so poor.  I Finally dropped some cash on a d-link modem and an linksys E3000 router. Here's the messed up part, if my wdtv is plugged, physically, into my router I can access my shares just fine.  I can stream movies with out any lag what so ever.  If I go wireless (as I have previously been with the old westell router/modem combo) I can no longer see my network shares. I can connect to the internet and do netflix, pandora, ect.  But when I go under network shares all that shows up is my router..

View 1 Replies View Related

Linksys Wireless Router :: How To Upgrade From V1 To V2 E4200

Jan 3, 2012

is it worth it?  I still cant stream some of my higher quality 6+gb .mpg video files with the v1 with the .03 firmware.   I notice the v2 says faster or better HD video. [URL]

View 5 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: E4200 Upgrade 1.0.03 Stuck At 98%

Nov 13, 2011

I downloaded the firmware from the Linksys site. I'm using IE v9 on a Win7 Pro x32. I'm using the E4200 as an access point so DHCP is disabled, no cable in the WAN port.
 
I uploaded the firmware but it seems to be stuck for 30 minutes at 98%. I read some threads saying it takes a while, but I'm not sure if it is locked up. The screen says not to interrupt the process so I don't want to reboot/reset and brick the router.

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
 
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: Firmware Upgrade E4200 Can No Longer Be Accessed

Oct 18, 2012

automatic firmware upgrade my E4200 can no longer be accessed.

View 6 Replies View Related

Linksys Wired Router :: RV042 - Can't See Network Shares After Connecting Router

Nov 10, 2011

I've installed a RV042 and my terminals cant even ping each other. They have Internet, but they cannot ping each other, or open network shares. It is not a dns problem becouse it does not work with the IP.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Can't Create Shares / Nor Edit Public Folder

Dec 5, 2011

I have a Western Digital "WD 6400AAC External MYBook that I can not create shares on, nor edit the public folder.  In each case, I receive the message "Error on page".  I've updated my firmware, several time, to the latest build. I've formatted the my WD drive using the router and my computer, and each time I try to create a share, "Error on page" shows on the bottom left corner of the page and nothing happens.  I tried several other drives and the results are the same. 

View 1 Replies View Related

Linksys Wireless Router :: E4200 - G Network Coexist With N?

Dec 18, 2011

having wireless G network coexist with Wireless N network on e4200.
 
I have an existing wireless G network with ActionTec router for VERIZON FIOS.  I just added the E4200 router for wireless N.  I have latest firmware, 1.0.03.  Version 1 hardware.
 
We are getting a couple of laptops for holidays and would like these to be able use wireless N.  I have older laptop/itouch/roku device that use wireless G/B network from ActionTec router.  I would like to keep the ActionTec router for wireless G/B, so that both 2.4 and 5.0 ghz networks are Wireless N only.  
 
I have both routers configured so that ActionTec is primary with DHCP and the e4200 is secondary, setup in bridge mode, with DHCP off and static ip of 192.168.1.2.   Used this for guidance -> [URL]
 
I have one SID for ActionTec Wireless G network and this is set for Channel 1
 
I have a different SID for e4200 Wireless N network, same for 2.4 and 5.0 and I left defaults on other wireless settings.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Guest Network Via LAN?

Feb 21, 2013

I have the wireless guest network up and running just fine. But, I need to also connect to the router's quest network via one of the ethernet ports. Can I just give the LAN-conencted PC a 192.168.3.x static IP to access the guest network? I am assuming there is no VLAN functionality...
 
And even better, can I set up a DHCP relationship to that port? So that any device plugged into the port will get a IP on that subnet?

View 4 Replies View Related

Linksys Wireless Router :: E4200 Can't See 5ghz Network

Aug 21, 2011

I have e4200 router set up with different SSIDs for 2.4ghz and 5ghz.  My laptop (Lenovo x220 with Intel 6205 wireless adapter) can't see the 5ghz network.  I've tried changing the channel for the 5ghz network and it didn't fix the problem.

View 9 Replies View Related

Linksys Wireless Router :: E4200 NAT Enabled No Network

May 27, 2012

Ever since I bought the E4200 months ago I had no wireless network between my laptops. pc's devices. I discovered now that I do have network (everything cool) when I disable NAT. That is all nice, but I don't have internet then.

View 8 Replies View Related

Linksys Wireless Router :: E4200 Guest Network Not Working

Jun 24, 2011

I cannot get the Guest Network feature to work.Even though Guest SSID is enabled, it does not show up on any devices attempting to connect. Manually connecting by entering the Guest SSID fails (not recognized). On devices with the primary 5 and 2.4 GHz configured they do see the third network but without SSID (unknown) and are also unable to connect to it manually using the SSID.I did not try this before 1.0.02. Have rebooted modem and verified all configs (multiple times). The network is live in an office and can't keep screwing with it or drastically changing its settings.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wired Network Failing?

Jan 12, 2013

my general internet connectivity with my e4200.I have a new but similar problem today with the same router.After powering down equipment and moving it around, my wired connections all error. Error in that they will not get an IP address nor will they connect to the internet or each other.My wireless connections still work flawlessly.
 
I tried powering down the devices over night (to avoid any heating issues) and then powering up but the results are the same. I am obviously missing something, and don't really want to start my network from scratch again...

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Block URL Across Entire Network?

Jan 7, 2012

I'm trying to block two URL's over the entire network via my E4200. I'm having a heck of a time doing this, I loginto my router via the browser (the web setup) (because I think Cisco Connect on the Mac is about the worst software ever written.) And I go to the Access Restrictions page. There I understand I'll have to use the Internet Access Policy pane to make some more advanced settings than the Parental Control. 
 
I enter a name for my rule, so far so good. Enable it. Go to the applied PC page. Open the page to enter MAC adresses and IP's. I go to the IP Address Range field and entere in the box numbered 01; 192.168.2.2 to 192.168.2.51 which in my case is the enitre network. Save the setttings and close that window. 
 
I don't set Access Restriction to deny becasue that seems to block the entire network. 
 
So I go the the Website Blocking by URL Address option and enter the URL I want to block.
 
I don't do anything wiht the the Blocked Applications since I don't want to block a specific service or application. So I click Save Settings. 
 
And yet when I go to the URL I want to block it doesn't work! [URL]

View 9 Replies View Related

Linksys Wireless Router :: Setting Up E4200 As Local Network

Jun 5, 2012

I've been playing around with my E4200 but cannot find the right combination of settings. My problem: I bought the router for cable internet that never happened. In the meantime I am accessing the web using a 3G dongle. Hoewever, while connected to the router (wired or wireless), all the PC's in my home refuses to access the 3G internet - it is as if it wants to use the E4200 to access the net, no matter what. So every time I want to access the internet, I have to disconnect the PC from the home network, and connect with the 3G on that particulat PC. (I have three PC's at home, 1 wired and two wireless). If I set the E4200 to bridge mode, I struggle to find a logical IP address, since I would ideally like to run the network at 192.168.1.X. How do I set the E4200 to allow a home network to be established without having to disconnect everytime I use the 3G on a PC? Also, it seems that if the router doesn't handle the DHCP duties, win7 by default makes the network public, which complicates sharing a lot...

View 5 Replies View Related

Linksys Wireless Router :: E4200 Slow Connection Within Network?

Aug 4, 2011

I installed the E4200. Internet works fine, and the internet connection is maximum performance. But if I copy a file between laptops, or to my mediaplayer (AC Ryan HD2), the connection is 3MB/s tops. I changed to the 5gHz and N settings, still no change.

View 6 Replies View Related

Linksys Wireless Router :: Change Guest Network Name On E4200?

Nov 11, 2011

Is it possible to change the Guest Network Name on the E4200? And if so, is it possible to do so without having to do a complete reset of the router and without using the Cisco Connect software?

View 4 Replies View Related

Linksys Wireless Router :: E4200 Sharing Media Across Network Via USB

Mar 10, 2012

I have been using the e4200 for about a week.  So far, so good!  However, a primary reason I purch it was the ability to share via USB across my network (Files and such).  Read the approved USB drives that r compatible and although my specfic drive was not listed (WD, my Passport) I connected it to the e4200 and set a folder called "movies"to share.  In this folder I have both bluray rips (25-32GB) and standard rips (5gb or less).  Regardless of source, the content was not playable.  It buffered like crazy.  So, is it as simple as using an approved USB drive and I will be able to share appropriately? 
 
The same folder plays great when connected directly to one of my media streamers USB drive, so don't think the drive/source is bad. 

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Check Who Is Connected To Network?

Sep 26, 2011

I can see who is connected via the physical ethernet ports on the E4200 router. However, is there a way to check who is connected to the wireless network.  Also is there a way to see rx/tx bytes statistics for all wired and wireless users (including ones that are no longer connected)? I've had the router for 3 months now and it works great but I find there isn't enough operational user info/stats on this router.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Cannot Get IPhone 5 To Access Network

Feb 28, 2013

I cannot get my iPhone 5 to access my wireless network (Linksys E4200) since I reset the router. It asks for the password but doesn't accept it. I'm a newbie so be gentle with me! MSZ

View 2 Replies View Related

Linksys Wireless Router :: E4200 As NTP Server For All Computer On Network?

Jul 8, 2011

My old dLink DIR-655 router could serve as an NTP server for all the computers on my network. It would get the time from the dLink NTP time source and allow me to sync all the systems on my home network off the DIR-655.
 
I had to replace it with this new E4200 but don't see an option for it to act as a time source for my internal network.
 
Can this router be used for this function?

View 1 Replies View Related

Linksys Wireless Router :: E4200 How To Set Up Wifi On Business Network

Mar 17, 2013

The task is to share Internet via Wireless router for visitors without any Proxy/Windows Domain authentication.We have:1) Windows based Domain with Active Directory Users, with no DHCP setup, only Static IPs allowed. Used as a DNS server, the IP-address is 192.168.1.1, Domain name, say, Internet Connection via Proxy server which authenticates users via above-mentioned DNS server, the Proxy server IP-address is 192.168.1.3, ruled by MS TMG (ISA server)3) A Wi-Fi Router Cisco E4200.The local area network is wired and works fine. Domain users are happy.The idea is to make visitors happy with a free Internet connection without wiring them into the LAN.So:1) Respected visitors would not have to set up static IP-adresses on their devices to connect to Internet and2) Respected visitors would not have to enter domain credentials to get access to Internet, but3) Network security should not be jeopardized.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Turn Off Wifi Network

Dec 20, 2011

I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost dont work at all with cable, even if i turn off the wireless network, the speed is about  2-3 mbit in and about 6-7 mbit outAll other computers, tv. printer wireless work very fine.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - 2.4ghz Network All Connections

Sep 1, 2011

I purchased a e4200 in hopes that its dual band capability would allow us to run a 2.4ghz network for certain devices and a 5ghz for everyone else. I am able to setup the router and connect but it seems when the 2.4ghz network drops the router drops all connections. 

At first I had the networks setup with the same ssid, then changed the 5ghz network to a new ssid but was still losing connection when the 2.4ghz network dropped. This may be a simple routing issue i am overlooking (bit of a network newbie).

View 3 Replies View Related

Linksys Wireless Router :: How Does One Connect To Each E4200 On Network For Setup

Jul 30, 2011

So, with the latest firmware update I could add a second e4200 to my network to use as a bridge or access point?  What I need is another device in my living room that can pick up the wireless signal and dish out network connectivity to my receiver, xbox360, and ps3.  With the new firmware update can this be done with a second e4200? How does one connect to each e4200 on the network for setup (dohave to change the default ip address of 1?)I just bought a trendnet TEW-687GA 450 mb/s wireless gaming adapter and a trendnet 5 port switch to accomplish what I mentioned above.  I'm just wondering if there is an advantage to switching over to two e4200's.  The trendnet adapater does not have a 5ghz channel.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved