Linksys Wireless Router :: E4200 Update DynDNS With Wrong IP Address

Jan 9, 2012

Frameware version: 1.0.03.
Environment: Internet (external IP say 24.x.x.x) ISP provided modem+router (192. 168. 1.x/ 24 IPTV network) E4200 (192.168.0.x/24 my home network).

The DDNS option page did report update succefully and shown the external IP address correctly on the page, however when I login to dynDNS it shows 192.168.1.x, which is the E4200 IP dhcp from the ISP's router.I know that it's double NAT, but the 192.168.1x/24 subnet is the IPTV subnet, and my old Dlink router did support and update the dynDNS entry properly.

View 4 Replies


ADVERTISEMENT

D-Link DIR-655 :: Router Update Wrong Dyndns Address

Mar 23, 2011

I have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.

View 16 Replies View Related

Linksys Cable / DSL :: WAG120N Didn't Update DynDNS Automatically

Apr 14, 2011

I just bought the WAG120N , firmware version is v1.00.12, but it seems it has a problem with the device here.I have to turn off the system / device every time i want to get my dynamic ip update into dyndnds.org , it cant auto update the new dynamic ip.What problem that cause somethin like this?I already upgrade the firmware into 1.00.16 , but it didn't solve the problem.

View 1 Replies View Related

Linksys Wireless Router :: Can't Update E4200 V2

Jan 3, 2013

Trying to update it to the new smart Wifi  but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing. 

View 3 Replies View Related

Linksys Wireless Router :: E4200 Rebooting After 1.0.02 Update

Jul 24, 2011

I recently updated the firmware to 1.0.02 on my E4200 and since then it's been rebooting randomly about once a day.  It was working perfectly fine before the firmware update.

View 5 Replies View Related

Linksys Wireless Router :: Cannot Update E4200 Firmware

Dec 13, 2012

Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
 
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560

View 1 Replies View Related

Linksys Wireless Router :: Does It Value To Update E4200 Firmware To 1.0.03

Oct 2, 2011

I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Won't Connect With WET610N Via N After 1.0.04 Update

Apr 28, 2012

After I updated my E4200 V1 with the 1.0.04 update I am unable to connect my WET610N to it with 802.11N. I can connect fine with 802.11G. I tried the Site Survey method of pairing them as well as manual. When it fails it goes through the minute timeout of trying and then Link Status is disconnected. I have anything from phones to laptops connect to the E4200 with wireless N, its just the WET610N that doesnt want to pair.
 
Before I was running the following:

E4200 V1 1.0.03
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11N 
  
After I was running:

E4200 V1 1.0.04
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11G

View 2 Replies View Related

Linksys Wireless Router :: E4200 Won't Update / Ping Or Trace Route

Jan 21, 2013

I have an E4200 and have added it to my network with a new static IP and DHCP and firewalls off.It runs off my cable modem and router (Virgin Media Superhub) that has DHCP.When I tell it to do a firmware update, traceroute or ping it fails, just wont do any of them.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Cisco Connect Software Update

Apr 27, 2013

I got a installation issue of cisco connect software. The installation keep downloading update and cannot process to next step. This "downloading update" is for cisco connect software update or router E4200 's firmware update?

View 1 Replies View Related

Linksys Wireless Router :: E4200 And WET610N No Changes To Bridges Before Firmware Update

Feb 6, 2012

Okay so I have been using my E4200 router and WET610N bridges for a while now without any issues really until yesterday when I updated the firmware on the 4200 now none of my WET610N's (I have 2) can connect via wireless at all. At first I thought it was a a wireless issue but I have other devices that connect up just fine via wireless.I've made no changes to the router or the bridges before the firmware update.
 
If I hook the bridge directly to the router I can access it and configure it, but looking at the "Status" page, I see the bridge try and connect wirelessly but is quickly disconnected.  Range isn't an issue as in my testing the bridge was 2 feet from the router.I've update the bridges to the latest firmware and have verified a 100 times that the settings on both my router and the bridges are set correctly (when the bridges are hooked up via network card).

View 1 Replies View Related

Linksys Wireless Router :: E4200 - USB Hard Drive No Longer Recognized After SW Update

Oct 15, 2011

I just updated Cisco software and my external hard drive is no longer recognized by Cisco.  It is a Seagate drive that is listed on the Cisco tested - passed - approved list.  It worked prior to this update.  I have disconnected the drive.  Reconnected it.  Rebooted.  Turned machine and router on and off and its still not recognized. 
 
Model name: Linksys E4200
Model number: E4200
Firmware version: 1.0.03 build 14
Operating system: Windows 7 SP 1
Software version: 1.4.11266.0
Connection type (WAN): DHCP

View 7 Replies View Related

D-Link DIR-655 :: Built In DynDns Update Won't Work

Aug 19, 2011

I have the DIR-655 Rev B with the 2.03NA firmware and am trying to get the dyn dns feature to work.  Unfortunately it will not push the IP address to my dyndns account.  I have all the correct settings in the panel but still nothing next to the status line.I've double checked all my settings but still no joy.Any way to get dyndns to work?

View 5 Replies View Related

Cisco Routers :: RV180W DynDNS / Update WAN IPA

Apr 11, 2013

I am using DynDNS in lieu of a static ip. My ISP changed my WAN ip last night as expected however the RV180W did not update the WAN ip, and so the router is now offline. Using a secondary internet connection I have logged into DynDNS.com and checked my hosts file and confirmed the ipa has not updated since March. I changed the update period from 360 to 2 so this never happens again, but I need to now change the WAN ipa in the RV180W to match the new one. I remember a screen that shows the current WAN ip address greyed out under the present one, but I dont recll where to go to get to that. I am at a loss as to where I go in the RV180W to change the WAN ip address.

View 1 Replies View Related

Cisco Routers :: Rv220W Does Not Auto-update Dyndns

May 6, 2012

I am trying to have the RV220W router auto-update the dyndns registration. The dynamic domain that I use is .info -- note the .info domain.
 
When I manually update the dyndns information (username and password) the registration does go through and the entry is updated on the dyndns site.
 
However, the registration does not auto-update after that.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Cannot Get WAN IP Address From ISP

Jun 28, 2012

I just bought the Cisco e4200 v2 router, I did all the installations as the Cisco connect software instructed me and everything went fine.After the installation I configured the router on  the WAN settings as (Automatic Configuration - DHCP), like my old router (Linksys WRT54GL) and I saw that my router doesn't get the WAN address from cable modem from my ISP(it stays on 0.0.0.0), it doesn't renew the IP address.

View 3 Replies View Related

Linksys Wireless Router :: Lost IP Address E4200

Sep 3, 2011

My wife accidently reset the password on our E4200 wireless router and did not write it down. I have tried to reset the router as well as run the set up CD - no luck. How can I recover and get my wireless network back in operation?

View 1 Replies View Related

Linksys Wireless Router :: E4200 V2 - Block Public IP Address?

Feb 2, 2013

i got an E4200 V2 and it is updated to Linksys Smart Wifi firmware.. Is it possible to block a specific public IP address?

View 4 Replies View Related

Linksys Wireless Router :: E4200 (firmware 1.0.03) Fails To Renew IP Address

Dec 1, 2011

After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch  with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Received Response From Host (IP Address)

Jun 23, 2011

I replaced my old wireless router with a Cisco Linksys E4200, running firmware version 1.0.02 build 13  May 24, 2011.  About once a minute the router sends an unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb with a destination IP address of 224.0.0.251.  The unsolicited message is a DNS response with source port 32784, transaction ID 0, flags 0x8400 (standard query response, no error), questions 0, answer RRs 2, authority RRs 0 and additional RRs 1.  The two answers both relate to the router itself: one has Name Cisco18738.local, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router.  The other is the reverse of the same address.  The additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address).
 
When my desktop computer receives these messages it logs an error, for example: "Jun 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0'"  The 10.146.9.1 is the router's IP address.  I also see these messages on the wireless link from my laptop.I suppose the E4200 is generating these DNS messages in a misguided attempt to make sure there is no old information about its name.  Is there a way to turn them off?  If not, is there a way to report this to Cisco as a bug?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Won't Give DHCP Address To Linux Boxes?

Sep 25, 2011

I've got threeLinux Boxes (running Centos 6).  They were all connected to my cheap WRT54GL--  DHCP worked every time.Absolutely no problems.  Both the LInux boxes and the WRT54GL had MTU set to manual, 1492.I replaced the WRTt54GL with the expensive E4200.  I set the new router's MTU to manual, 1492.  NONE of my Linux boxes ever receive a DHCP address.  I look at the logs, and they do DHCPDISCOVER, get DHCPNACK, try several different intervals, and then fail the interface and quit.ALL I did was unhook cables from the WRT54GL and plug into the E4200.  Yes, the WRT54GL was powered off.   NOTHING was changed in the Linux configs.  Yes, DHCP is enabled, address-range assigned, etc.  BTW--  one box is dual boot with Win7-- in Win7 (using the same card, obviously), DHCP works just fine.  But, Linux doesn't work.
 
I can give the boxes static IP's, and all is well.  Just can't get DHCP to work.  I evfen tried putting in DHCP reservations (via MAC assignments)  for the E4200-- still doesn't work. The new E4200 is on the 02 firmware (which I believe is cuurent). If I can't iron this simple task out, in a couple of days I'm taking the E4200 back, and getting a refund.  I'll stay with my old WRT54GL... it works.  Hate to give up on some of the new E4200 features, though.

View 2 Replies View Related

Linksys Wireless Router :: Cascading - WRT54GCv3 Doesn't Get IP Address From E4200 DHCP

May 21, 2011

I've tried to cascade two Linksys routers, but It hasn't worked for me. The first one (which has cable-modem connection) is the brand new E4200, and the second one is the old WRT54GCv3.[code] However, the WRT54GCv3 doesn't get the IP address from the E4200's DHCP. I've also tried to connect them directly (without the PLC), even specifing an static IP on the second router, but I got the same results.I've to state I don't want to change the first router IP/gateway parameters because I have a web and game home server working with an static IP and I don't want to put it offline temporarily because of readjusting network parameters.

View 9 Replies View Related

Linksys Wireless Router :: Changes In MAC Address Filter List Are Applied Only After Reboot Of E4200

Nov 26, 2011

I have noticed that changes in MAC address filter list are applied only after reboot of router. It is inconvenient.

Router Linksys E4200
Firmware Version: 1.0.03

Operation system on client computer is Windows 7.Can it be resolved in the next version of firmware?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings

Sep 11, 2011

I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1.  When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc.  I get the message "Aquiring network address" forever, and I never get a connection.

View 1 Replies View Related

Linksys Wireless Router :: E1200 - Get Notifications When External Ip Changes And Updates Dyndns?

Jun 28, 2012

Is there a way to get notifications (emails) when the external ip changes and the rotuer updates dyndns?i need to get an email about this change of ip. The only constraint is it has to work without a computer attached to the router as it would have to be powered on 24/7 So ip change notifiers like trueip or  ipcheck won't work as they are programs that run in a computer.

View 9 Replies View Related

Cisco Router Giving Out Wrong Address?

Jun 21, 2011

i have a cisco router that has dhcp configured, the router ip address is 10.10.10.***. all computer that attached to the router are using static ip and works fine but when i am connecting my laptop using wireless in gets an 192.168.1.*** address.

View 17 Replies View Related

Linksys Access Point :: E4200 Discover New IP Address Of Reconfigured Router

Feb 14, 2013

I have changed from a DSL internet service to a Comcast cable system.   I have setup my E4200v1 router as an Access Point, to extend coverage in my building.  It works fine, but I can no longer log on to  the unit using its'  IP address 192.168.1.1.  The browser returns the message "Internet Explorer cannot display the webpage."   If I want to tweak the settings the only thing I can think to do is to push the reset plug, back to factory settings and go through the whole process.   Is there a way to discover the new IP address of the reconfigured router?  I left the default address as it was when I made the changes to AP status. 

View 1 Replies View Related

Linksys Wireless Router :: E3200 Gets Wrong IP?

Jun 15, 2012

I'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of 127.0.0.1 on the status page. I then have to renew the ip and reboot. This happens once a day, usually.

View 3 Replies View Related

Linksys Wired Router :: BEFSR41 V3 - Dyndns Server Is Unavailable

Dec 29, 2011

I'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?

View 1 Replies View Related

Linksys Wired Router :: BEFVP41L Possible To Configure Using DYNDNS Domain

Mar 12, 2011

I have to buy a VPN router. I'm thinking in the BEFVP41L . The problem is that in to sites to connect the VPN tunnel I have dynamic IP. It's possible to configure this router using DYNDNS domain?

View 1 Replies View Related

Cisco Wireless :: WLC 5508 - Lightweight AP Client Getting Wrong IP Address From DHCP Server

Mar 29, 2012

I have 2 units Cisco WLC 5508 running software version 7.0.220 with 70 over units Cisco AP 1262N and 1242AG. Some of wireless clients having problem to get the correct IP address from the DHCP server. There are 2 units of Microsoft DHCP. Both DHCP server ip have been configured on the Interface at the WLC. The core switch also being configured with ip helper. I've attached the debug output of one of the wireless client during the problem.

View 12 Replies View Related

Linksys Wireless Router :: E3000 Caller ID's Time And Date Are Always Wrong

Feb 29, 2012

I have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
 
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved