Linksys Wireless Router :: E4200v2 Frequent Lockups And Reboots?

Dec 25, 2011

New E4200v2 router, latest 2.0.26 firmware.  Reboots on its own <or> locks up and requires power recycle 3-4 times a day.  More frequent if I attach a USB drive to USB port.   Reset to factory, only using as a router (no USB drive, no printer sharing, no TimeMachine backups, etc.)Still locks up or reboots 3-4 times a day.  I need a reliable router that does not reboot so often.

View 5 Replies


ADVERTISEMENT

Uverse Lockups And Router Reboots?

Apr 6, 2011

We've had UVerse for about a year now - but lately we've had weird problems:

-about every 2-4 weeks, the router will spend a night constantly locking up and rebooting itself. ATT says they don't know why, and wanted me to check the power?? When it does this, it will do it for 30 minutes to TWO HOURS.

-every couple of days, the channels will freeze. If we change channels and then back, it returns to normal for a bit. Sometimes for a while, sometimes only for a minute. We have two boxes, each one does it. Even affects DVR playback. Internet doesn't seem to be affected, so I had originally though it was the boxes. ATT has remoted in, and can't find anything out of the ordinary.

View 3 Replies View Related

Linksys Wireless Router :: E4200v2 Giving Non Stop Random Reboots

Apr 1, 2012

Watch youtube? Router resets! Hookup a wired connection? REBOOT! Hookup a tivo wirelessly, use wifi calling, or listen to spotify.. REBOOT!Is there ANY way for this router to NOT reboot randomly?

View 4 Replies View Related

D-Link DIR-655 :: Frequent Reboots Required To Restore Connections?

Jul 6, 2011

I have a DIR-655 and OVERALL like it -- but there is one HUGE flaw. 

I have set up several MAC address-based rules/schedules to restrict the times of use by my kids.  FOR THE MOST PART these work fine (all clients on wireless).   BUT at random intervals, all of the PCs with these MAC-based rules/schedules in place suddenly lose their internet connection (i.e. get blocked by the router).  This does not happen to me or my wife (neither of our laptops have MAC-based restrictions in place for them).  A reboot of the router reestablishes connectivity for the blocked machines.  This reboot is something I find myself doing daily -- sometimes multiple times per day.  I have verified that the latest firmware version is in place. 

View 1 Replies View Related

Cisco Routers :: RV120W - Frequent Unexpected Reboots

Jun 2, 2013

I have problem with RV120W router, device reboots very often ( up to 3-4 times during working day ), firmware is up to date ( 1.0.4.10 ), last week I decided to use "restore the factory defaults" unfortunately problem still exists.
 
Router is working in small office, there are 3 PC and 3 VOIP phones ( connected via LAN ) and 1-2 devices connected via wireless ( smartphones )
 
I've tried to view some logs but unfortunately no luck, can see some errors/warnings in dashboard ( see attached picture ) but cannot see more details ( log configuration wrong ? )
 
Additionally sometime I can see that CPU utilization is 100% 

View 4 Replies View Related

Linksys Wireless Adapters :: WUSB600N And Random PC Lockups?

Oct 7, 2011

I have a problem with my WUSB600N in that it periodically stalls my PC for about twenty seconds.  It happens randomly, but particularly when I am using YouTube or playing online games. The symptoms are basically that the screen and process lock up.  Sometimes I can continue to move the mouse for a short period, but usually that stops moving too.  If I'm playing music in the background (iTunes usually or YouTube) then the music keeps going after the lockup, again only for a short period.  Usually about twenty seconds or so later, the whole things recovers.  I've tried Alt-Tab or Ctrl-Alt-Del while locked, but that does nothing until the system recovers, at which point i find myself with the Task Manager window or back in Windows, so clearly the keystroke has hit the system normally.
 
PC is running Windows 7 64, with Avast antivirus, Zonealarm firewall, Malwarebytes antimalware.Its an E6750 on a P5N32E Deluxe with 2G RAM.The wireless access point is about five metres away in a straight line through an open doorway.  Signal strength is generally excellent (4 of 5 bars is almost invariably showing whenever I look).I've tried one site which suggested using the RALink drivers instead, but I could not even get that to recognise and activate the WUSB600N, so I'm back with the current (as of today) Linksys drivers straight off their site (18-Jan-10 3.0.10.0).  Adhoc 11n disabled, 11h enable, Multimedia/Gaming disable, Radio on/off enable.  I've tried with all enabled, but still happens.  So I'm back with default configuration. 

View 3 Replies View Related

Linksys Wireless Router :: Frequent Connection Drops Over VPN With E3000

May 17, 2012

My VPN connection is dropping every few minutes for a few seconds at a time over VPN on the E3000.  It wreaks havoc with the applications that require a constant connection.

View 3 Replies View Related

Linksys Wireless Router :: WRT54GH Frequent Disconnection With DSL Modem

Jul 9, 2011

I purchased WRT54GH wireless router back in 2009 and it was working fine except for past 1 month, wherein the Internet Connection was being disrupted 15 - 20 times in an hour. I thought it could be fault from ISP end; however after investigation by ISP we found the fault was not from ISP as, when Wireless was unable to establish connection with the DSL Modem it was failing but when tried to connect laptop with the DSL Modem it worked fine (Wired connection). I did try the Settings mentioned in an earlier post to change the UPnP and the Beacon Interval etc. This however doesnot seem to work as the internet has been disconnected almost thrice since then. (Approx. 15 - 20 mins). When the router is unable to connect to internet I restart the Wireless Router and the DSL Modem. After restarting, the Internet connectivity works fine.
 
Below are the Advanced Wireless Settings from Wireless Tab:
 
Authentication Type: Auto Shared (Default: Auto)
Basic Rate: Default (Default: Default)
Transmission Rate Auto (Default: Auto)
CTS Protection Mode: Disabled Auto (Default: Auto)
--------------------------------------------------------------------------------
Beacon Interval: (Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval: (Default: 1, Range: 1 ~ 255)
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346)
RTS Threshold: (Default: 2347, Range: 0 ~ 2347)

View 2 Replies View Related

Linksys Wireless Router :: E1200 Frequent Loss Of Connection

Feb 3, 2013

Having several issues w my E1200. For quite some time I have had intermittent loss of internet connection. This was somewhat true even before I got a wifi router. & it has continued. Recently it has been even worse & I'm not sure if it is my isp, my cable modem or the router. ISP came out & checked & said signals looked ok, although modem is old.Now i find out that the version of Cisco Connect that i had been using is incompatible w Mountain Lion so it won't work now. & newly downloaded dmg files say they are damaged (or that app has been modified or damaged--I'm not in a position to tell which but same results after I downloaded a 2nd time).
 
I have been having more frequent loss of internet connection at home. & when I click on the wifi icon to check, it shows it looking for networks. Also it has not been uncommon to see that it has switched to my guest network.Why would it switch to my guest network? What is the difference between the 2 besides the fact that I guess the guest network doesn't have access to everything on my regular network (which right now is only my iPhone, but may get wireless printer).Also when it shows the lists of networks that it "sees" my guest network does not show a padlock icon so what does that mean? It does have the default password.
 
Also because I had no idea that Cisco Connect was not compatible w Mountain Lion I didn't even think to check for upgrades before I upgraded to Mountain Lion & now I can't open Cisco Connect. Shows unsupoprted OS. & I'm also stalled trying to update the firmware for the router.I'm really beginning to see why it was cheaper than an Apple Airport Express. Even at a very low hourly rate, the lost time spent when this has not been working right has not been worth what I saved on the purchase price.

View 4 Replies View Related

Linksys Wireless Router :: Frequent PPPOE Disconnects On E2500?

Dec 13, 2012

I have a Cisco/Linksys E2500 router that I have had for over a year and it has worked without issues for over a year.  However my wireless ISP just switched my CPE from A Mikrotik wireless radio to a Ubiquiti wireless radio.  As soon as they did this my PPPOE sessions from the E2500 (acting as my PPPOE client) start disconnecting and reconnecting every few minutes causing major problems with my internet and voip connectivity when it looses connectivity every few minutes.
 
The strange things is if I connect my much older WRT54G router as a PPPOE client (with the same exact PPPOE configuration), it works just fine and I don't have any PPPOE disconnects. 
 
I upgraded to the latest firmware on my E2500 and nothing changed, it still disconnects my PPPOE sessions probably close to 50 or 100 times an hour. 
 
I'm thinking it's some sort of compatibility issue between the Ubiquiti Nanobridge Radio CPE and the E2500 router acting as my PPPOE client.  Also another thought was that perhaps my ethernet port wasn't negotiating speed/duplex correctly on the E2500. 
 
Is there any way to hard code the speed/duplex on an E2500?  I can't seem to find any spot with that setting.

View 8 Replies View Related

Linksys Wireless Router :: EA4500 Needs Frequent Hard Reset?

Aug 20, 2012

I have an EA-4500. Unfortunately I often have to hard-reset it:
 
- every time I update the firmware (last time I updated to 2.1.38.138827 via Cisco Connect Cloud)
 
- sometimes whenever there is a black-out
 
The first time it happened upon the automic firmware update which released Connect Cloud. In such cases, the router stays with the white Cisco logo on and no other lights work (i.e. the ethernet lights on the rear side of the router are off). The only reset procedure working is: unplug Internet cable, press reset for 30 secs, turn off while keeping reset pressed, wait 30 more seconds, turn on again always keeping the reset pressed.
 
I've tried to turn off for 2 minutes but it doesn't work. The strange thing is that the above reset procedure does not always work, sometimes I have to do it like 10 times before the router Cisco logo light starts blinking on and off (like breathing).
 
Besides this, which is very very annoying, I'm satisfied with router functionalities and performance.

View 7 Replies View Related

Linksys Wireless Router :: WRT160N V3 - Getting Frequent Stop Pages In Streamed Video

Nov 26, 2011

I am getting frequent stop pages in streamed video, a message appears on my laptop saying "loading" and a red line beginning traversing the screen. Eventually the line gets across and the video begins again to stream. When I do a speed test I get around 10 Mbps both through the router wireless and hardwired connections. This happens almost every 10 minutes. I have tried rebooting the router and the problem persists

View 9 Replies View Related

Linksys Wireless Router :: EA6500 Reboots Every Few Hours

Nov 4, 2012

I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.

View 6 Replies View Related

Linksys Wireless Router :: WRT400n Reboots Every Few Minutes

Jul 2, 2011

Check to see if there is a firmware upgrade and there is.  Well I updated it with the newest and only one out there.   I did the upgrade, said sucessful and now it will just random reboot or something........ every few minutes the power light starts flashing....... then all the light go out, then power flashes again and it comes back up.   I have tried many times to reflash it with that new firmware but no avail.  I wish I had the old firmware back because it was working fine till I did this upgrade.  

View 5 Replies View Related

Linksys Wireless Router :: WRT54G2 - Airplay Reboots It

Dec 22, 2011

I have an issue when I use Airplay through my iPhone4S, my router reboots after 30 secs or so.  I have a WRT54G2 v1.5 and the receiver is a Pioneer VSX-1021-K.
 
However, when I used Airplay through itunes from my laptop, it works just fine.  In addition, when I borrowed my neighbors router's(BELKIN) it was working fine also.  So this lead me to believe that it's my router that is causing the issue. 

View 7 Replies View Related

Linksys Wireless Router :: E2500 Reboots At Random Occasions?

Jan 1, 2013

I have a E2500 router that until recently has been working fine, the router currently will reboot at random occasions. I have tried resetting the router to factory defaults to test if the firmware was an issue but both the factory default and the most recent firmware build(1.0.05 build 2) offered on the download support page. I have tried 2 different AC adapters to test power and two different Cat5 cables so hard ware wise everything is looking good. I am concerned that it may be an issue still with firmware or with the cooling fan and the unit may be overheating.

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Requires Regular Reboots?

Jul 25, 2012

So I have a WRT160N firmware v3.0 wired connection to my PC, and at least once a day my connection speed drops from 2mbs down to almost dial up speeds at 60kps. Just unplugging the router then plugging it back in seems to fix it every time.   I've contacted my service provider and they say there's no issue on their end, and since I don't get this problem when I plug the modem directly to the PC I agree with them.  I've done a factory reset and that didn't work.  I've gone through the FAQ and can't find anything useful in there. 

View 7 Replies View Related

Linksys Wireless Router :: Does E4200V2 Redirect To CCC

Jun 29, 2012

I think my E4200v2(Firmware Version: 2.0.37  ) should redirect to CCC as this link, is the CCC just could be used in  US?

View 4 Replies View Related

Linksys Wireless Router :: E4200v2 Keeps Rebooting

Mar 16, 2012

Recieved this E4200 as a repplacement for a v1 that kept dropping wireless connection. Now after about 1.5 months the router keeps rebooting. Tried resetting, etc...no luck. Calling Cisco now.

View 3 Replies View Related

Linksys Wireless Router :: Wake On Lan E4200v2?

Mar 28, 2012

this topic has been discussed under the v1 software and marked as solved yet it has not been. Has anyone attempted with version 2 software and been able to connect after the arp was flushed?

View 6 Replies View Related

Linksys Wireless Router :: E4200V2 - How To Do Mac Filtering

Apr 21, 2012

Just got my new E4200 v2 router. Set up mac filtering for one device and after saving the change the router was refreshing and disconnected all my devices and could not log in to the router wired or wirelessly and had to do a factory reset. Have the latest firmware. Is this a defect in the router?

View 2 Replies View Related

Linksys Wireless Router :: Keep Old SSID On E4200v2?

Dec 23, 2011

I will soon upgrade my wireless network from a WRT610N to an E4200v2. At setup of the router, I assume I'll be able to change the SSID of the E4200v2 and I plan to keep the same SSID as on my old router. With the same SSID as currently seen by the devices on my network

View 4 Replies View Related

Linksys Wireless Router :: Is OQS On E4200v2 Really Working

Jun 29, 2012

I have a synology DS411 and a ATV2.DS411 is always downloading from internet,normally the download' bandwidth of DS411 is around 2MB/s.In my old netgear 3800,i just need to active WMM and add a port OQS that the port connection DS411 is low.Then when I watch stream video from internet on my ATV2.I can see the DS411's bandwidth will be reduced automatic.I replaced 3800 with E4200v2 some days before,and I have done the same config ,turn WMM ,set ATV MAC to highest and DS411 MAC to lowest.  But when I watch ATV2,DS411's bandwidth seems not be reduced,so I cant get the smooth video Its very bad.

View 9 Replies View Related

Linksys Wireless Router ::  WRT45G Reboots On Accessing Web Base Utility

Sep 22, 2011

i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot

info:
led power is on stable
led lan is on
led wlan on  and the access point work
 
 1.http:\192.168.1.1

2.enter user name and password (admin,admin)

3.hir the page begin to get  after a few second  the router reboot Page cannot be displayed completelty

i try :

- simple reset

-(30/30/30) reset and i enter in managment mode firmware upgrade
 
i don't try hardware reset

View 6 Replies View Related

Linksys Wireless Router :: E4200 Constant Reboots With Media Streaming

Dec 5, 2011

I upgraded my E3000 to a new E4200 several months ago.  I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Reboots Every Time When Use AirPlay From MacBook Pro

Oct 16, 2011

I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots.  When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot.  The E4200 is running firmware 1.0.03.

View 9 Replies View Related

Linksys Wireless Router :: E4200v2 / Utilizing More Than One Static IP From ISP?

Feb 29, 2012

We have the Linksys E4200v2 router. We have two servers on our network that we want to access remotely (from outside). We have two Static IPs from our ISP. We currently utilize one of those IPs to access one of the servers-no problem.  How can we utilize the second IP to access the second server?

View 3 Replies View Related

Linksys Wireless Router :: Why Does E4200v2 Not Detect VOIP ATA

Jan 11, 2013

I have a static IP on the ATA (Linksys PAP-2T) ...the router will only pick it up occasionally...most times it does not.  The ATA is on and working (I can call in/out) but I can't see how the router can't find/see it. I have added the ATA to the DHCP reseve list but still nothing. I have the port fowarded for the ATA but when I go to canyouseeme.org it comes up as "Connection timed out"...becuase I think it can't see the ATA behind the Router.

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 - How To See Who Is Connected To Wifi

Jan 8, 2012

On the D-Link it was easy, I can see who is connected to which radio.But I can't figure out how to see who is connected to WiFi on hte E4200?I run several access points in my house, and I need to make sure htey are all working.If I can't see who, if any, is connected, I have no idea if WiFi on the E4200 is working.

View 2 Replies View Related

Linksys Wireless Router :: E4200V2 Firmware Is Not Available As A Download

Dec 14, 2011

V2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install.  This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version:  v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols

View 1 Replies View Related

Linksys Wireless Router :: E4200V2 - Use Specific DNS Server?

Dec 20, 2012

My ISP dynamicly assigns IP's so I have my New E4200V2  set up as Automatic Configuration DHCP. I want to be ablt to use a specific DNS server rather than the one issues by my ISP.No matter what values are in the Static DNS 1, 2 and 3 the router continues to pull a DNS from my ISp. My POS old D-link 615 was able to utilize a custom DNS server with no issues so surely ther emyst be a way to do the same on the E4200. 

View 8 Replies View Related

Linksys Wireless Router :: E4200v2 DMZ Does Not Appear To Work Correctly?

Dec 23, 2011

E4200v2 DMZ does not appear to work correctly?I have two e4200v2 both with latest firmware and it appears to me that the DMZ setting does not work.  I continue to have to apply many port forwarding and triggering rules to make needed ports accessible.  

View 9 Replies View Related

Linksys Wireless Router :: Way To Set-Up E4200v2 And PLWK400 At Home

Aug 16, 2012

I am wondering what is the optimal way to set-up my E4200v2 and PLWK400 at home?  I have several devices (laptops, tablets, phones) that connect on .11g and .11n.

My current set-up:
E4200v2:  5ghz - Wireless-N only (SSID home-n), 2.4ghz - Wireless-B/G only (SSID home-g)
PLWK400:  SSID home-ext (separate part of the home)

I am using WPA2 Personal security if that makes a different. One question would it be "better" to have the same SSID for all 3 wireless settings (5ghz, 2.4ghz, and PLWK400)? Would the various devices know which frequency to switch to for best speed and range?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved