Linksys Wireless Router :: EA6500 DHCP Is Broken?

Sep 30, 2012

Generally works on wireless Guest network. Only allows one IP on wired or wireless. Using latest cloud firmware.
 
Instead of giving out the 192.168.1.100-150 as configured. It will give out from the cable modem (i think) 192.168.100.x
 
Seting static IP on computers works fine.

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wumc710 With Ea6500 - No Ip From Dhcp?

Jan 27, 2013

I have WUMC710 connected wirelessly over 5GHZ to EA6500. EA6500 is connected to fios router. fios router hands out ip addresses. EA6500 is in bridge mode.
 
I get ip addresses on any device that connects directly to ea6500 over wireless (both 5ghz or 2.4ghz). However, when I conenct to WUMC710 wired connection, I can't get any IP from DHCP. I have reflashed firmware on WUMC710 to no avail.

View 7 Replies View Related

Linksys Wireless Router :: Ea6500 Reserved Dhcp Addresses For All The Boxes

Sep 28, 2012

I have my other XBOXs connected to a 24 port switch but the one connected to the ea6500 directly gives me this moderate NAT issue. I thought this new router would be an upgrade to my old dlink but so far I get a new problem every day.I have reserved dhcp addresses for all the boxes and set up port triggering for the ports listed in several guides. But what else do I need to do? Is it likely I got a bad router?

View 2 Replies View Related

Linksys Wireless Router :: EA6500 - Change DHCP Client Lease Time From 1440 To 480 Minutes

Apr 2, 2013

I'm trying to change the DHCP Client Lease Time from 1440 minutes to 480 minutes.  When I try to apply the new settings, I'm getting a message that says "Invalid Characters" and it won't stick. I've tried this in three different up-to-date browsers (ie10, Chrome and Firefox).  Also, I'm connecting locally through LAN and I have the latest EA6500 Firmware: 2.1.39.145204

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Administrator Page Is Broken?

Sep 27, 2012

I recently "uninstalled" DD-WRT from my router and tried to install the actual firmware for the router, so I went to this page [URL] WRT54G and select version 5. My router is really version 5.1 but I read on this forum that this router works with version 5 so I downloaded it and installed it.
 
However, this is how my admin page looks like,
 
And I can't do anything at all. Is there a fix for this? Is there an actual version 5.1 firmware? Or must I switch to a different, proper router?

View 8 Replies View Related

Linksys Wireless Router :: SPAM Broken Packets By E4200

Nov 17, 2011

I have a problem with e4200. Buy it about 1 month ago with firmware 1002, link to ISP by simple LAN with DHCP IP lising without any method of identification like PPOE or other. 2 days ago tech support of ISP call me nd say that my router send bad packet to their hardware and all LAN collups include DNS server. I disconnect all device from router but same thing happened. I update firware to 1003 but this action work for 1 day, and again tech support call me. What wrong with router or may be with ISP technician's hands?

View 3 Replies View Related

Linksys Wireless Router :: WRTP54G Route Table - Broken Internet Access

May 2, 2011

I know that WRTP54G is a voip device, but it is router as well and my problem is related to routing part.I cannot access public internet servers with IP in subnet 2.0.0.0 / 8 and 1.0.0.0 / 8. In the 2.0.0.0 / 8 subnet are some akamai cdn servers (yes, the fbcdn .After some time I've found, that routing table in wrtp54g contains also entries:
 
1.0.0.0                 0.0.0.0                 255.0.0.0                 LAN&Wireless2.0.0.0                 0.0.0.0                 255.0.0.0                 LAN&Wireless

which cannot be deleted. It looks like someone wanted to filter dark space when the router was developed.Is there any way, to get rid of it? I've restored to factory defaults, no change. Firmware version is 3.1.27.ETSI

View 9 Replies View Related

Linksys Wireless Router :: Incoming / Outgoing Logging Broken On E2500 Firmware

Jun 20, 2012

Have a few of these routers internally as well as at various clients.  The incoming and outgoing logs show up blank, even when there are 10-20 computers using the Internet and I know there is traffic being generated.  DHCP and security logging still works fine.  I also have a few E1200s on the latest firmware that are logging just fine... I'm just having issues with the E2500s.

View 6 Replies View Related

Linksys Wireless Router :: Setting Up QOS On EA6500?

Dec 23, 2012

I would like to know how to setup QOS on the linksys EA6500 wireless router. I know about the media prioritization settings, however, thats not enough for me. I would like to setup upload and download speed limits for certain devices on my network, like, say 300kbps download for a certain device at all times.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Downgrade To 1.1.27?

Dec 13, 2012

provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Not Support WOL?

Dec 14, 2012

I use EA6500 I Don't find WOL OTL..

View 1 Replies View Related

Linksys Wireless Router :: Use Two EA6500 In Same Network?

Nov 3, 2012

I was wondering if it's possible to use two EA6500 in the same network, one as main router and the other as anacess point?

View 2 Replies View Related

Linksys Wireless Router :: DSL Modem To Go With EA6500?

Jan 29, 2013

I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?

View 7 Replies View Related

Linksys Wireless Router :: Don't See Anything About VPN Pass Through On EA6500

Dec 30, 2012

Looking to upgrade my old G router to the EA6500.  I don't see anything about VPN pass through on the EA6500 or any linksys N router.  Is this feature something they no longer include?

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Without Routing / Using WAN?

Dec 29, 2012

I would like to use the EA6500 in my network - but nor as primary router (or in fact routing at all). I would have thought, one could simply tell the device to use a particular gateway, but it does not seem to be easy. I have used many other home routers as combined switch/AP/USB-drive (latest a D-Link DIR-655), but the EA6500 seems very picky. The "easy" "Smart Wi-Fi" setup requires internet access through the WAN port - and that divides my home network, which then have two zones which cannot really "talk" to each other. Alternatively, I can reset the device and access it directly on the IP (initially 192.168.1.1). But then I can change only LAN and WLAN settings. Stuff like Guest Access, USB-devices etc. won't work. Do anybody have success with this device without using the WAN port and the DHCP server?

View 8 Replies View Related

Linksys Wireless Router :: EA6500 - Way To Get FTP To Work?

Nov 13, 2012

I have a new EA6500 and am failing at getting ftp to work.  I have updated the firmware.My ftp folder is on a Seagate USB Go-Flex drive attached directly to the router via USB.  I have set up shares which I can see and access via my computer which is attached to the router.FTP is configured to use port 21 and UTF-8.

View 9 Replies View Related

Linksys Wireless Router :: EA6500 NAT Redirection Bug?

Nov 20, 2012

I have a pair EA4500s that I am swapping out for a pair of EA6500s.  One EA6500 is a router.  The 2nd EA6500 is set as a bridge and us being used as an Access Point about 200ft and two floors above the main EA6500 router.  The two units are connected via DECA (200MB Ethernet over DirecTV cable - an alternative for others with a cable provider is called MOCA).  So, basically two EA6500s serving as two Access Points on opposite sides of the house and all wireless networks on different channels but all sharing the same SSID.  Everything works GREAT except for one unusual issue.
 
The issue is with wired or wireless clients.  If I try to use my PUBLIC address with port number to address a local client on the local network inside the NAT network the NAT redirection fails.  In other words if I use 172.16.16.8 for a local web cam while inside my network from an iPhone or PC all works great.  If I use the external public address, however, the connection times out.  If I pop out the EA6500 doing the routing/NAt and swap it with the old EA4500 with basically the same config as the EA6500 everything works again.  The EA6500 and the EA4500 are configured identical for the most part and with the EA4500 as the main router NAT redirection works great but with the EA6500 NAT redirection fails.  I have the firewall setting to FILTER NAT REDIRECTION unchecked so that's not the problem.
 
Seems very odd.... and only seems to happen with the EA6500..... the work around is to use the local IP address when the client is on the inside and the public address when on the outside, but what a pain that is....

View 9 Replies View Related

Linksys Wireless Router :: Reverse NAT On EA6500?

Oct 9, 2012

Any work around to enable reverse NAT or similar functionality on the EA6500? I recently upgraded from a Dlink that did support reverse NAT to my internal devices through a dynamic dns service. Now I have to know the IP address for all the devices.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Getting Different Ip Instead Of Default Ip

Nov 27, 2012

i setup my new EA6500 with the ethernet cable from my cable modem plugged into the EA6500, but with my old E4200 still switched on, but disconnected, i seemed to have ended up with a ip address of 10.250.27.47, not the 192.168.1.1 i was expecting, which i had with the E4200, my question is, is 10.250.27.47 something i should expect with the EA6500, or do i need to do a factory reset on the EA6500 and start again with everything else switched off as a precaution ?

View 6 Replies View Related

Linksys Wireless Router :: EA6500 Broadcasting Two 2.4 MHz Channels?

Oct 30, 2012

I set up EA6500.  All kinds of problems with anything on the 2.4 MHz band.  My wireless desktop on the 5.0 MHz band was flawless.  So I ran Xirrus Wi-Fi Inspector (freeware).  The router is transmitting two 2.4 MHz signals!  One is the SSID I set up and named.  The other one is identical in every way except that the BSSID is slightly different.  It is a non-broadcasted SSID that shows up on every device as "Other Network."  I was on the phone with Cisco Support tonite, and they were great as usual but had no answer.  If you change the channel on the 2.4 MHz band, the shadow network also changes to the same channel (this blew the Tech's mind).  We reset the router to factory settings and started over.  They are calling me back tomorrow.  This router has great features on paper, but so far, it has not delivered. 

View 5 Replies View Related

Linksys Wireless Router :: Functionality Lost On EA6500?

Oct 2, 2012

The only way I could get my EA6500 to work as auto DHCP to my Roadrunner Motorola SBV5220 Surfboard cable modem was to disable IPv6 support on the router.  It appears that the EA6500 attempts to issue the DHCP request for address assignment from the modem using IPv6.  I could see the status of "Connecting" for IPv6 in the Diagnosis Reports and it would hang.  Once I disabled IPv6, the modem assigned an IPv4 address and everything worked fine.  However, am I giving up any functionality by having to do this?  I bought this router and the WUMC710 Universal Media Connector for the 5GHz connectivity for streaming and just wondered if I'm impacting UMC performance or any other functions of the router by having to disable IPv6.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 NAT Multiple IP Addresses?

Jan 23, 2013

I currently have my EA6500 behind verizon fios router. I have 5 static IP addresses assigned to FIOS router, however the machines I want to connect to are behing EA6500. It's a dual NAT scenario:
 
Public IP - FIOS Router - 192.168.1.0/24 network - EA6500 - 192.168.2.0/24 network
 
What I would like to do is for each public IP address, I would like to forward traffic to a particular host on 192.168.2.0 network. I can easily configure FIOS router for static NAT and assign one internal IP (from 192.168.1.0 range) for each public IP. However, I don't see a way to assign multiple IPs from 192.168.1.0 network to EA6500 internet interface.
 
I don't want to use EA6500 as a bridge as it will pretty much reduce my EA6500 to a very expensive GigE switch.
 
Is this possible? Or should I replace it with something more useful like a business router? This is for my home so I would like to avoid buying an expensive business router.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Without Cloud Connect?

Mar 4, 2013

I am interested in running the EA6500 without all the Cloud Connect software etc. Is this possible? Is there a basic way to set this up without that requirement?

View 1 Replies View Related

Linksys Wireless Router :: Unable To Connect To EA6500

Apr 13, 2013

I just bought the EA6500 last week. Had to RMA it on Monday and got the new one today. The issue still persists. The power light is constantly blinking and my computer is unable to obtain an IP address from it. I contacted tech support and was unable to get the issue resolved so I had it exchanged believing it was defective. The new one does the same thing. When I connect my computer to it, the light on my Ethernet port stays a solid orange instead of green like it does for my usual router. The Cisco light is constantly blinking.

View 9 Replies View Related

Linksys Wireless Router :: Unable To Map Drives With EA6500

Mar 8, 2013

I have two USB drives connected to my EA6500. When I use the ip to connect to them everything works just fine, but I cant map the drives. If I access map drives, I cant do anything with the files. It looses connection all the time.

View 2 Replies View Related

Linksys Wireless Router :: Ping Go Up On EA6500 When Enable QOS

Feb 2, 2013

I've noticed that my pings on  all my devices go up when I enable QOS.This even happens on the PC which has high priority.The ping times go up by an average of 6ms, so if I normally have a 14 ping to a host it will now be 21.I've tested this by turning media prioritization on and off and everytime its turned on this seems to happen, although sometimes it requires a router or pc reboot before the issue arrises.

View 8 Replies View Related

Linksys Wireless Router :: IPhones Won't Connect To EA6500 On 2.4 GHz

Apr 1, 2013

I have it set up as Capri (2.4 GHz) and CapriHD (5 GHz). CapriHD was intended only for HD video traffic. My wife's iphone 4S can only use 2.4 GHz, and it suddenly quit connecting after 1-2 months of use. My iphone 5 can use either band and it can only connect on 5 GHz.  This problem MIGHT correspond to the recent firmware upgrade?  I was traveling a lot around that time so can't be sure that is a culprit.Really thought the problem was the hardware, so I replaced it with a new EA6500 and getting the same result.

View 2 Replies View Related

Linksys Wireless Router :: Can EA6500 Be Set Up As Access Point?

Mar 2, 2013

Can the EA6500 be set up as an access point connected to a remote router which has a connection to the DSL modem?I want to replace one of my wireless access points with a faster wireless interface, but this will be connected via hard wire CAT-5 cable located away from my modem/router.

View 3 Replies View Related

Linksys Wireless Router :: Difference Between Ea4500 And Ea6500

Oct 5, 2012

linksys ea4500 vs the linksys ea6500? is there any real difference?

View 2 Replies View Related

Linksys Wireless Router :: Ea6500 Resetting To Default?

Apr 21, 2013

This router is resetting to default(erase router name and passwords and resetting router login to default. only thing i see is my sons has a iphone that will use the wifi and i have set parental restriction on it during certian hours. This past 3 time it has reset in 2 weeks his phone with the parental restricions are common. one other thing is i use the app on my droid to check settings on the router .
 
so th ecommon points here are one one using wifi threw router and has restrictions on it and outer is me with the linksys app to log into my rrouter and make a change like yuring on parental controls on..
 
but what happens is the router will reboot and renames itself to cisc05179 and cleared all protection and sets router to unsecured.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Won't Update Firmware?

Apr 4, 2013

an EA6500 router that has intermmitent connectivity issues.  Went into the configuration page and saw he was a couple versions behind on firmware.  Used the online update option, firmware downloaded and then indicated that router would reboot.  Did not power off router or leave the configuration web page.  Watched light go out on router and come back on, but the spinning wait icon never went away after 5 minutes.  Powered off and on and was back at the same point with the old firmware still.  Downloaded the firmware to local drive and applied from local file, but same results.  Waited 10 minutes this time.  Surely it doesn't take more than 10 minutes for the router to reboot itself from a firmware flash?
 
Gave up on trying to update firmware and configured wifi settings.  Left friend's house and then got a message about 15 minutes later that the router had locked up again.  If he pulls power for 2 minutes it will then work for another short period of time. 
 
Is there anything that can be done to try and restore normal operation to this particular router, or are these all signs of a hardware failure and the unit should just be replaced?

View 8 Replies View Related

Linksys Wireless Router :: EA6500 Won't Obtain Lease

Dec 20, 2012

Small company, under 10 computers, wired and wireless printers, straightforward network. Do not need (nor particularly want) Smart Wi-Fi, Cloud Connect, or or anything other than a simple manually-setup router. Have a new EA6500 I plan to use replacing an E1000 that is playing up (needs to be reset every morning) connecting to Verizon east (former GTE) aDSL. Connected the EA6500 to a laptop via ethernet, changed router password to same as E100, set up the two port forwards I'll need (IPs on the internal network are static in the 192.168.1.0/24 block), changed DHCP server to start at 101 (don't ask), leave Internet Connetion Type setting at "Automatic Configuration - DHCP" (same as E1000), shut down both routers and modem (Westell WireSpeed 890-210015-04). Connect EA6500 to modem, power up modem, power up router, and...Nothing. Does not receive external IP via DHCP.If I switch back to the E1000, it immediately picks up the IP lease.

View 6 Replies View Related

Linksys Wireless Router :: EA6500 - How To Protect It Against Software

Jan 9, 2013

I rexently bought a EA6500 to controll when and how much my children should access internett. Even before I have installed it my son have downloaded a program called Netcut, who hacks innto the router and take controll over the access and the prioritation of computers on the network. Is there any way I can block such software to access my router. I had a livechat with Linksys, and they claimed that the router have no capability to block programs. I also tried to download "Netcut Defender" but my AVG warned me about a worm/virus in the download, so i aborted the operation

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved