Linksys Wireless Router :: RE1000 Wired PC Prompting User For Login Information For Wireles
Oct 30, 2012
I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.
View 3 Replies
ADVERTISEMENT
Jun 26, 2011
I have a remote access VPN profile configured on an ASA 5540. This profile is almost identical to the same profiles configured on other ASA 5540. The profile is linked to Active Directory for authentication. For some reason, users are not being prompted for the domain name field when connecting to the firewall, on the other firewalls they get prompted for all three (user/pass/domain).
All the firewalls are running 8.0(4) 32. And the following is the configuration of the firewall that I am experiencing issues with:
ip local pool TESTVPN 10.244.124.1-10.244.127.254 mask 255.255.252.0
group-policy TESTCERT internal
group-policy TESTCERT attributes
banner value **** WARNING ****
banner value You are Now Successfully Connected (code)
View 1 Replies
View Related
Jan 22, 2011
Linksys WRT54GL I need access to my router, but the default password and usernames do not work. I think hitting the reset button and holding it would set everything back to default, but will EVERYTHING but reset to default or just the password?
View 2 Replies
View Related
Jan 27, 2013
I have setup my EA3500 for guest access however when my clients connect and start their browser they are never prompted for a password to continue their session. The browser times out. I can connect to the secured network by using the wireless password and the clients work.
I have the lastest firmware. I have a host of different clients, Kindle Fire HD, RIM Playbook, Windows 7 laptop. I have turned off guest account restarted, reconfigured and nothing changes. The browser always times out and the client is never prompted for a password. I bought this router because a friend that I visit has one so that visitors can use the internet...I know hers works, I have brought my Kindle along with me and connected to her Linksys router and it prompts for a password. I liked the feature so much I bought this one.
FYI. This router was replaced under warranty, I spent two days (I'm not kidding) on the phone with Linksys support trying to get the first one to work. I rebooted, reset to default, changed settings, tweaked, used different clients all with no effect so they replaced it.
View 9 Replies
View Related
Apr 13, 2012
How many RE1000 extenders can be attached to one router ?
View 9 Replies
View Related
Mar 15, 2012
I am using RV082 V3 router. After a reset of the router I have access via both LAN and WAN for some period of time (not yet known) later that day or the next day when I try to access it via the WAN it sits on "opening page" for a while eventually coming up with the login box. After logining in the page only partially loads. (All the settings are shown, but the proper selections are not made.) Internet explorer will then show something like "8 items remaining" in the status bar. If I close and re-open IE I am unable to connect at all. At this point I also cannot login via the LAN. However, internet access appears to be fully function through the router and the router also responds to pings. (I have the latest firmware loaded.) The only resolve I've found is power cycling the unit to regain login access to it. Very irritating, and impossible when not at the physical location.
View 1 Replies
View Related
Oct 25, 2011
I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house. Everything is working great except for one important detail.. There is currently no way to disable SSID broadcast on the RE1000 range expander! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting. I am seriously considering returning the RE1000. Linksys. add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment.
View 2 Replies
View Related
Aug 25, 2012
Firstly I cannot get my Linksys RE1000 to work with my network having tried the set up CD on 2 computers (mac and windows). The main router is a BT Home Hub 2.0
The main router is in the basement where out internet connection enters the house, also in the basement is our LAN board where we have ethernet cables extending to parts of the house. There is weak wireless signal from groundfloor up to the top floor so wanted to find something where I could plug into the ethernet port and it would broadcast an wireless network to the upper floors/areas with a weaker signal. Thought the RE1000 would do this job but i can't get it to do it wirelessly let alone connect it to the main router using a ethernet cable.
View 2 Replies
View Related
Dec 29, 2012
I am having a setup problem with the RE1000. When I plug it in, my laptop is able to see it, and I'm able to access it and attempt to set it up. However, once I tell it how to connect to my main wireless router, and it attempts to log onto my wireless network, the RE1000 disappears from my list of networks. My blu-ray player also cannot see it.
View 5 Replies
View Related
Jan 18, 2013
I have an RE1000 between my EA3500 router and two Panasonic WiFi network cameras. Sometimes the two cameras appear in the RE1000 Wireless Clients Table, sometimes one appears, and sometimes none appear. It looks like the cameras jump between the RE1000 and the EA3500. When this jump occurs, I loose connection to the cameras. If I restart the camera, it sometimes works but not always. When I disconnect the RE1000 it works OK because both cameras always use the EA3500. But the signal is very weak.
What do I need to do to get my EA3500 and RE1000 to work well with my two Panasonic network cameras?
Note that I am using 802.11b/g on the router and cameras.
View 9 Replies
View Related
Jan 6, 2011
I use Rv016 and config load balance and connect to website [url]... and click Login BANK it can't login and show error page [url].... When I try connect bypass don't use RV016 can connect it. when I try to close firewall service it can't not login again.
View 1 Replies
View Related
Sep 1, 2011
On a BEFVP41, I disabled snmp for testing (because it was sending some strange alarms), and now I can't login to the web setup pages. The username and password no longer work. I thought maybe it reset itself to default (blank/admin) but it didn't.
View 1 Replies
View Related
Apr 18, 2013
I've just installed NCS. When trying to configure NCS for ACS Tacacs+ authentication, I receive the message below when trying to login to NCS. ACS records my login in the 'passed authentications' log. I am using ACS 4.2."No authorization information found for Remote Authenticated User. Please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server". I used the following link to configure ACS for NCS, url...
View 3 Replies
View Related
May 9, 2013
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies
View Related
May 21, 2012
Is this a good price *NEW* for this unit...325.00
NEW SEALED* Cisco ASA5505-BUN-K9 Firewall 10-User
I assume 10-user means this device comes with a 10 user VPN license? Is there anything else I should be looking for when purchasing an ASA? Mainly looking to use my NetGear WNDR3700 as just a WiFi AP and not my edge device.
View 19 Replies
View Related
Sep 27, 2012
I have a question about Cisco ASA 5505 firewall.We need 3 interfaces on the firewall , "inbound", "outbound" and "DMZ" , to control traffic between these zones.
Can we do this with Cisco ASA 5505 50-user bundle , or do we need to purchase Cisco ASA 5505 Security Plus bundle to get the DMZ zone working.
View 4 Replies
View Related
Dec 21, 2012
No changes made but router will lose all information for IPv connectivity. I have paid twice to support to fix this issue and it still occurs every few months. I tried rebooting router, and doing an IP Release/ Renew and router does not get IP address.
View 4 Replies
View Related
Jul 7, 2012
The case is I have a Linksys WRT 54 G2 V1.5 router for my wireless connection but the signal does not get to the other side of the apartment. I Got a RE1000 wireless extender, someone said this is what i needed, and it worked fine for a few hours, but then it keeps dropping my internet connection everywhere in the apartment.
View 19 Replies
View Related
Jun 6, 2011
How do I setup remote login that would allow 3 or 4 people to login to the same computer.Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.
View 11 Replies
View Related
Mar 5, 2013
I have an ASA 5505 that is hosting a SSL VPN. The user can not login. They receive login error. To the best of their knowledge, this problem started after the office Domain Controller was rebuilt. I have looked on ASA and in AD and cannot seem to trace the issue.
View 9 Replies
View Related
Mar 2, 2011
We are using the ASA 5520 as Firewall and VPN gateway for remote access by employees and vendors. Is there a way to view a history of VPN user logins? We used to have (or we still have but no longer using it) th CVPN 3005. This device keeps log files of all activities. I miss having this capability in the ASA 5520.
View 4 Replies
View Related
Feb 19, 2013
user can't login into domain with right credentials in active directory
View 6 Replies
View Related
Sep 11, 2012
We are wanting to use local database users to authenticate our SSH connections to our 6500 cores.
We have added the usernames and password into the 6500 using
username anameduser password astrongpassword or username anameduser secret astrongpassword
We where expecting the commands to be the same as other iOS devices example C3750 we would add.
Line vty 0 4 login local
And this would allow us to use the local user database to authenticate our ssh sessions.
The login local commands are not availbe on the 6500s and we have not found any documentation on how to impliment a local database for this purpose except in a CatOS 6500.
View 1 Replies
View Related
Feb 26, 2012
how to track user logins with this device? I've pointed it to a SYSLOG, but it only creates Virtual Access connections, and I don't know who that connection belongs to.
View 3 Replies
View Related
Oct 8, 2012
We have dialup users that are connecting to our portal for uploading/downloading credit information. We are currently using ACS 3.3. There is a requirement that, initially we provide clients with their username/password, but we want to enforce the policy that when the user logs in first time, he should be prompted (forcefully) to change his password.
1) Can this be done in ACS 3.3
2) What solution shall be used in this case ? can it be done in ACS 5.3 ?
View 5 Replies
View Related
Aug 22, 2011
I have a console access to a Cisco 4500 series router over Cisco access server, which has following "line con 0" configuration:
View 8 Replies
View Related
Jan 21, 2013
I am unable to login to my router ? I have tried to reset my router and am still unable to login to the online control panel. The steps that I went about resetting the router were pushing the reset button for 30 seconds. That did not work so I pushed the reset button for 30 seconds, unplugged the router while continuing to hold the reset button for 30 seconds, plugged the router back in while holding the reset for 30 seconds.
View 6 Replies
View Related
Mar 2, 2013
I can't log into the router. Get 502 Bad Gateway - Model EA4500; Have a USB Drive connected to the router.
Power-off and Powered-Back on - no change.
View 9 Replies
View Related
Oct 4, 2011
After updated firmware to 1.0.03 still can't log in to ftp on port other than 21 ( eg. 2121 ). Will it be fixed ever ? I told with guys on live chat but connection broked twice.
View 9 Replies
View Related
Aug 28, 2012
I need to set my wireless network with those equipments. I have the E4200 with RE1000 in my old place, with no problems. In my new place, there is a blind spot and I bought another RE1000 to use like a repeater of the first repeater (is that possible????). Does not work.
Searching for answers in the internet, I found how to set the WDS (available on the RV110W) :
A Wireless Distribution System (WDS) is a system that enables the wireless interconnection of access points in a network. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them.
Can I do it with my equipments, or I have to buy the WAP4410N?
View 2 Replies
View Related
Aug 24, 2012
I recently bought a Cisco RE1000 wireless repeater to boost the wireless signal to my garage office. Since then the signal has been intermittent, fluctuating between strong and weak signals, sometimes dropping off completely. Today I finally uplugged it, and the signal strength seems the same, even steadier, though that could be just the way the wind is blowing today.
How do I know if I'm picking up the wireless or repeater signal? Could it be interfering with my basic signal? How do I know which signal I'm getting?
View 1 Replies
View Related
Oct 17, 2008
Ok, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank). Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router.
View 2 Replies
View Related
Jan 11, 2013
I am using a wrt54gl in 'Router' mode. It is behind a server that is configured as a server/router/firewall that is serving dhcp addresses for the network behind it. I have bypassed the dhcp server hardware by plugging the LAN out from my server/router/firewall into a switch port on the back of the wrt54gl. I have switched off the dhcp server in the wrt54gl during it's configuration.how can I login to the wrt54gl to review and make note of its current configuration ?
View 3 Replies
View Related