Linksys Wireless Router :: WRT120N Gives Audio Alarm (beep) About Every 10 Seconds

Aug 27, 2011

Since a few days my WRT120N gives an audio alarm (beep) about every 10 secs. Cannot find how to overcome this or find the root cause. Installed new s/w version. H/W reset. Nothing works.

View 2 Replies


ADVERTISEMENT

Cisco Routers :: WRP400 - Audio Drops For 5 To 15 Seconds On Each Packet Error?

Oct 29, 2012

On several calls i noticed that the outgoing audio stops for 5..15 seconds randomly. I'd say it happens on an average of every 5 minutes.
 
When this happens, i can see that the value after "Call1 Packet error:" increases by one. Why just a wrong packet may stop the outgoing audio for so long? i've much more packet losts (about 3%) but they give me no problem at all.
 
Since a little and cheaper Handytone HT502 gave me intermittent audio too, but the effect was much better (audio still stops, but in a second it comes back), i wonder if is there something i can do by tweaking the WRP400 settings, I'm still using firmware 1.01.00.

View 7 Replies View Related

Linksys Wireless Router :: WRT160N V2 Connects For A Few Seconds Only

Sep 9, 2011

I have a WRT 160N v2 router. There's 1 computer wired to it, that works fine.  Then I have 2 laptops and a pc wireless to it.  One laptop is a mac and that seems to be fine, another is a Compaq notebook that has trouble connecting and the pc has the same problem.  The signal strength is very good to excellent so thats not the issue.  What happens with the pc is, it will connect but at times its only for a few seconds then it disconnects.  Sometimes restarting the computer fixes it for a while but it will eventually start having the problem again.  It detects the wireless network just fine, and the router's firmware is up to date.  I have a feeling that its the settings in the router but im not sure what to change. 

View 3 Replies View Related

Linksys Wireless Router :: WRT160N V2 Signal Dropping For Few Seconds

Nov 24, 2011

I have Linksys WRT160N v2 wifi router that I have been using for over a year now, till two months back I was very happy with the router, speed was good without any signal issues though in last couple of weeks I have noticed that the router has started to create problems like the browsing will stop it self for a few seconds without any reason (specially I notice this when I am on youtube playing a video that will stop after 2 or 3 minutes).

View 7 Replies View Related

Linksys Wireless Router :: E2000 Signal Remains For About 30 Seconds And Then Gone Again

Dec 4, 2011

My wireless from my Linksys E2000 router NEVER works. I've tried the same things and I have also tried to change the Advanced wireless settings, none of these things worked.When I unplug the energy cable from my router for ~15 secs, I sometimes can connect to a Wireless signal, this signal remains for about 30 seconds and is then gone again. This happens even if I'm standing right next to my router.I have no idea what the problem is, even I find this story very unbelievable, but I have tried everything I could and still we never have Wireless

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Few Seconds For Web Interface To Display

Jul 16, 2011

I have a E4200 setup for 2.4 & 5G running the latest firmware. When I connect to the router wireless 192.168.1.1 and log in, it takes a few seconds for the web interface to display. Same happens when switching to the different config tabs. Is there any reason for this? I would think it would be immediate but it takes anywhere from 3-5 seconds for IE9 to respond.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G V1 Disconnect Power From Router For About 15 Seconds / Plug It Back In

Apr 27, 2013

I have a Linksys WRT54G2 v1 router which is having a daily problem of connectiing to the Internet on my home wireless LAN. My temporary solution is to disconnect the power from the router for about 15 seconds and plug it back in .... and all is well.... at least for another day or so.The real problem is that instead of properly connecting to IPv4 address 192.168.1.100 ..... it randomly connects to Autoconfiguration IPv4 address 169.254.29.54 When this problem occurs the SSID list shows both my 192 connection as well as a public network with no Internet connection?
 
I've used this router for several years without a problem until I recently bought a new  Canon wireless MG5320 printer which initially had problems connecting to my LAN. After a telco with tech support the printer works fine but now I am now experiencing the Autoconfig address problem.My LAN consist of the WRT54G router, a Motorola cable modem, a Lenovo laptop running Win7 64bit, a Hp desktop running Win7 64bit  and the Canon wireless printer. (all connected wirelessly)

View 2 Replies View Related

Linksys Wireless Router :: Ea4500 Wifi Signal Disappearing For Few Seconds

May 6, 2012

My new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect.  Smart phone disconnects too.  It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering.  The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping.  In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal.  I really can't tell, but I know it is becoming very frustrating.  The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen. 
 
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing.  I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400.  So far, the past evening, it was okay, but I am not confident it will stay that way. 

View 6 Replies View Related

Linksys Wireless Router :: E3200 Constantly Losing Connection Every 15-30 Seconds

Jun 3, 2012

Firmware 10.0.4 April 2012 WinXP SP3 AT&T Basic DSL Slipstream 5100 wired and wireless connection constantly drops then re-establishes connection every 15-30 seconds or minutes. How to fix this ventilation is not a problem nor the power source very close to switching to dd-wrt if no solution in 48hrs?

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Internet Port Cycles On And Off Every Few Seconds

Oct 22, 2012

I bought a EA4500 to replace my old WRT54G earlier this year. At first the router worked fine. After the automatic firmware upgrade to Cisco Connect Cloud, I was never able to get the Connect Cloud stuff to work, constant 500 Internal Server errors when trying to access the router with the Internet cable attached.  So I downgraded back to the old firmware and all was well again. Then I started having problems a few months ago, when I would wake up in the morning, the router would be cycling the Internet port on and off. I could usually reboot everything and it would work the rest of the day. I lived with it like this a while, and support couldn't seem to find anything wrong. Eventually it started getting worse, until the point I could hardly ever get it to stay connected. I got Cisco to RA the old router and I figured problem solved. Now while the EA4500 was gone, I used my WRT54G again, and everything worked fine for nearly two weeks while I was waiting on the replacement EA4500.

So today the new EA4500 showed up, I connected and configured it, and it worked for a short time. Then suddenly I lost Internet, looked up at the modem and the LAN light was going on and off every few seconds. So I'm back in the same boat as before.I've tried changing cables, same setup works fine with the WRT54G. Modem works fine with WRT54G and connected directly to the computer, zero problems. I tried lowering the MTU, turning on MAC address cloning, and various other things.My modem is a HughesNet HN9000.

View 9 Replies View Related

Linksys Wireless Router :: How To Connect Additional Devices To Wifi After 3600 Seconds

Oct 17, 2011

What the heck is key renewal? And why does it change every 3600 seconds? Does that mean my password will change? If so how do I connect additional devices to my Wi-Fi after the 3600 seconds?

View 3 Replies View Related

Linksys Wireless Router :: WRT120n - How To Set To 811.11n

Apr 18, 2012

Linksys WRT120N to 811.11n? I set  to 811.11N Only with 40Mhz, saved and reboot the device but the signal continuous in 811.11g.

View 3 Replies View Related

Wireless Not Working On WRT120N Linksys Router?

May 18, 2011

I bought a new Linksys WRT120N modem which is working great, but the wireless for some reason isn't working properly. My computer is able to sense the exsistence of the connection tho. I've tried using other computers to connect to it, and still the same problem, can sense but cannot connect.

View 8 Replies View Related

Linksys Wireless Router :: Can WRT120N Use Subnet 255.0.0.0

Mar 25, 2011

I currently have a network using ipaddress 10.1.x.x and 10.2.x.x and 10.3.x.x  with a subnet of 255.0.0.0   I purchased 2 of the wrt120n wireless routers for testing and find I can not use the subnet of 255.0.0.0.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N QoS Does Not Work?

Oct 29, 2009

I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming.  Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up. 
 
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem

View 9 Replies View Related

Linksys Wireless Router :: How To Setup WRT120N

Sep 5, 2010

I'm using an Static IP adress and i'm using wrt120n router, but to connect the internet i have plugged the internet cable in the 1,2,3,4 (doesn't matter which one) slot. So now i'm just using the wirelss part of the router without "routering" if i can say so. When i put the internet cable in the Internet slot of the router, the laptop just cant connect to internet - it shows Unidentified network without Internet Access. I don't know what type of changes i have to make in the WEB interface of the router. I think i have to set the type of the connection - now is DHCP and may be to put my IP adress, DNS, Subnet mask in the router settings, but don't know how exactly. I've tried to set up the router with the CD-interface but same thing happened - Unidentified network when the cable is plugged in the Internet (yellow) port. How to set up the router to be a router, not just a wireless switch?

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Keeps Resetting On Its Own?

Jan 18, 2010

My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?

View 9 Replies View Related

Linksys Wireless Router :: Disable WPS On WRT120N?

Aug 20, 2011

Is there anyway to disable WPS on the WRT120N router?
 
All I can do is switch the "view" from WPS to manual configuration in the management console...this doesn't actually disable anything.Maybe I don't understand WPS security, but what's the point of using a 20 character WPA2 password if WPS has an 8 digit PIN that I can't change or disable?

View 3 Replies View Related

Linksys Wireless Router :: Can't Get New WRT120N To Connect

Mar 17, 2010

I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet.  When I go through the steps from the CD to install, the wizard does not find the connection.  When the internet is plugged directly into the computer, it works fine.  If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install

View 4 Replies View Related

Linksys Wireless Router :: Wrt120n / Wifi Keeps Going Off

Jul 2, 2012

I have a WRT120N router installed in my office.All PC and Laptops are connected to it via WiFi.there are about 3 PC and 4 Laptops.The WiFi keeps going Off now and then..and comes back on in a minitue or so.

View 9 Replies View Related

Linksys Wireless Router :: Map Page On Wrt120n?

Apr 2, 2013

why are some of the lines solid & others dotted on the map page?

View 4 Replies View Related

Linksys Wireless Router :: Cannot Connect PS3 On WRT120N

Dec 25, 2011

I removed my ps3 from my network map and now i can't connect it back. How to do it?

View 1 Replies View Related

Linksys WRT120N Wireless Router Installation Process?

Mar 27, 2011

I plan on replacing my linksys BEFW11S4 wireless router with a new linksys WRT120N wireless router. Should I completely remove and unplug the old router before inserting the startup CD and beginning the installation process for the new router?

View 3 Replies View Related

Linksys Wireless Router :: WRT120N Keeps Loosing Connection

Sep 3, 2011

I have several computers and printers connected to a WRT120N router which is connected to 10mpbs DSL.  The computers are all running WIN7 and are hardwired to the router.  On the one PC, it keeps losing network connection.  I've tried upgrading the router's firmware, reset, etc. to no avail.
 
I think it may be related to the same IP address being assigned to multiple machines connected to the router.  Is there a way to set specific IP addresses to each item connected to the router to see?

View 1 Replies View Related

Linksys Wireless Router :: Constant Disconnecting With WRT120N

Nov 7, 2009

I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok. My old router on my computer ( wired) was working well before I installed the wrt120n.

View 3 Replies View Related

Linksys Wireless Router :: WRT120N Gateway Not Detected

May 6, 2012

I've recently bought a  WRT120N router, when I install the router using the CD an error occured error 322 New router or gateway not detected. I tried to download new version of firmware but it didnt work. 

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Can't Access Setup?

Oct 3, 2011

I can't access the web based setup via 192.168.1.1. I've had this problem since I swapped to Static Ip from PPPoE. I changed internet provider and now when it type 192.168.1.1 in the browser it says Internet explorer can't show the web page. I've tried Crome and FireFox but with the same result. I followed the instructions in [URL] but to no result.

View 1 Replies View Related

Linksys Wireless Router :: WRT120N Not Recognized At Setup?

Apr 8, 2012

I replaced a WRT120N router with a new one thinking that the old one was damaged.  During setup, the router wasn't recognized.  I used the same connection for a line from the internet to my LAN connectin and the line works fine.  Connecting through the router is no good.

View 1 Replies View Related

Linksys Wireless Router :: Difference Between WRT120N And WRT160N

Jul 29, 2011

I am considering to purchase a Linksys Wireless router, but I just don't know which one to select.There are so many different types that seem to have very similar (if not equal) specs.If I just limit myself to the WRT120N, the WRT160N and the E1000, they all have 4 ethernet ports (10/100), and they all support 802.11 b/g/n for the wireless part.Obviously they all promise a blazing performance, and wireless coverage throughout the whole house, without (many) blind spots.But if their specs are the same, why are they different types?

View 2 Replies View Related

Linksys Wireless Router :: WAN Port Burned WRT120n

Jan 2, 2013

Several days ago there was a huge storm, and I think a thunder burned the WAN port of my linksys wrt120n router. Everything else is working good, I can detect the local network but I don't have internet. My internet connection is also working good. My question is, do I have a possibility to use some of LAN port like a WAN? I'm only using 2 of 4 LAN ports. It would be very useful because it's a pity to buy another router just for a not working WAN port.

View 3 Replies View Related

Linksys Wireless Router :: Laptop Will Not Connect To WRT120N?

Jan 25, 2011

I am trying to manually setup a WRT120N router. I am using my laptop (hard wired) for the initial setup. Okay, everything is working fine until I unplug the ethernet cable and try to go wireless. Will not connect to my network. I am also having this problem with all my other devices.
 
I had everything running fine on a WRT54G, I just wanted to try out the WRT102N. I did change the SSID name form what I was using on the WRT54G.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Connecting After Sleep

Dec 1, 2011

I'm having an issue where essentially my only course of action is to unplug the router and plug it back in.  I can connect my laptop (Dell Inspiron N4010) and my phone (HTC Inspire) once.  But then if I put my computer to sleep, or I take my phone out of the wireless range and come back, I cannot connect again.  I've gone through and played with the settings (changing the upnp, the beacon intervals, the channel, etc) but to no avail.  Invariably, I always have to come back to unplugging and plugging back in. 
 
Also have a Kobo E-Reader and a wireless Canon printer.  The whole point of a wireless printer was so that it would stay connected and I can print from my laptop.  This router is making this useless. 

View 4 Replies View Related

Linksys Wireless Router :: How To Connect Wrt120n To Android

Dec 28, 2011

My mother in law bought my daughter a impression android tablet for Christmas it connects fine at public hotspots but I can not get it to connect to our wrt120n router at home. I have tried everything I know to add it. It asks for the password then says getting IP address then disconnects.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved