Linksys Wireless Router :: WRT54G - VIZIO Blu-ray Internet Player Won't Connect?

Mar 21, 2011

I have WRT54G router.  The VIZIO VBR231 unit finds the network OK and indicates it is connected, but nothing will stream, and  when I run a Network Test it gives me this 3 line error:

Connection to 0.0.0.0... successfully established
Resolving... could not be established
Please check your connection and try again.
 
The VIZIO support folks were not beneficial at all, and said something about Port 80 or Port 43 not being open or available.  When I talked to linksys support, they said I needed to add the VIZIO player's IP (which appears to be 0.0.0.0 in the system settings).  I poked around a bit, including the Port Forwarding tab on the router setup, but could not see a way to assign 0.0.0.0 to one of these ports, and I am hesitant to experiment.
 
I'll probably just return the unit to Costco, but I'm trying this forum as a last ditch effort.  BTW I have a VIZIO internet TV that I love, and that had absolutely no problem at all connecting to the wireless.

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: E1000 - Unable To Hook Up Vizio Dvd Player To Wifi?

Jan 28, 2012

I am unable to get this to hook up my vizio dvd player to wifi

View 2 Replies View Related

Cisco Wireless - Vizio Player Router Setup?

Jan 2, 2013

How do I setup Vizio blue ray with Cisco wireless router

View 1 Replies View Related

Linksys Wireless Router :: EA4500 - Allowing Vizio Internet Apps To Connect From Two Different TV's

May 28, 2012

EA4500 Linksys router stopped allowing vizio Internet apps to connect from two different TV's. Problem, Just got brand new EA4500 router and Motorola SURFboard DOCSIS 3.0 High-Speed Cable Modem Model: 575319-019. I have 2 new vizio big screen tv's with internet apps. All was working fine and had no problems but occasional drops or limited access.
 
One day BOTH TV's could no longer connect. However, The tv's will connect to another access point. therefore the problem does not exist in the TV/s and has to be a problem in my access point (I.E. Router allowing access). Additionally, all other devices connect and work fine. I have already unplugged everything for an extended period of time. Checked for updates on firmware and verified no software needed to be updated. Rebooted router... Am using wpa-psk and feel i shouldn't have to go weep as it was working fine...

View 3 Replies View Related

Linksys Wireless Router :: Connecting Wrt54g To Panasonic Blu-ray Player?

Aug 19, 2012

It is a wired, not wireless connection. The light isn't even coming on for the port it's plugged into. I tried a different cord, a different port, upgrading the firmware, and restarting each device. Nothing has worked so far.

View 9 Replies View Related

Linksys Wireless Router :: Settings On WRT54G Restrict Windows Media Player?

Jan 4, 2012

I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.

View 8 Replies View Related

Linksys Wireless Router :: Vizio E3D320VX TV Will Not Connect To Cisco

Sep 5, 2012

just got a Vizio E3D320VX TV and it will connect to my E4200V2 2.4Ghz N-band, but not the 5Ghz N-band. Both 2.4Ghz and 5Ghz are configured virtually identical: 1) both are Wireless-N Only, 2) both auto channel width, 3) both WPA2 Personal security, 4) both SSID broadcast disable.
 
The only differences are: 1) obviously the SSIDs and 2) I manually set the 2.4Ghz channel to the least used in my area. I kept the 5Ghz channel auto.To connect to 2.4Ghz, in the Vizio TV network settings, I left their settings to Auto (DHCP), and put in the SSID name. The TV searches for it, sees that it's WPA2PSK and asks for the password. Put it in and boom it works.When I try on 5Ghz (again on "Auto"/DHCP for the TV), I put in the SSID, and the TV "thinks" about it for awhile, then says something like "Cannot connect, please try another Wireless Access Point". It never gets to the point where it asks for the WPA2 password.
 
The TV is downstairs and the E4200V2 is upstairs, but I used my iPad2 in the same room and it connects to the 5Ghz with no problem. But just in case the TV has a 5Ghz reception problem, I set the channel width to wide/40Mhz and bumped tried a couple of the higher channels (149 and 161), and it still won't connect.I also went into Administration and turned on logging to try to see what is happening when the TV tries to connect, but for some reason nothing is logging, not even my other devices' traffic -- very strange (yes I hit Save Settings after enabling logging).

View 7 Replies View Related

Linksys Wireless Router :: WRT54G Cannot Connect To Internet

Sep 22, 2011

Router: WRT54G
Network: 802.11g (and I'm using WEP)
Wifi Adapter: Intel R Centrino R Ultimate-n 6300 AGN
No. of devices connected to wireless network: 5

My problem is that whenever 2 devices have joined the wireless network, I will not be able to do so despite placing the laptop or iPhone right next to the router, hence getting excellent signal strength. Or, if I am already connected to the network, I get knocked out repeatedly. I don't think it is a hardware or software issue because I'm still able to connect and get a very stable connection after someone leaves the wireless network.This is getting frustrating and I have tried all ways and means to resolve this but to no avail. Is this about some setting that I can tweak, e.g. to allow more users onto the network? But this has already been configured to '50'!

View 7 Replies View Related

Linksys Wireless Router :: WRT54G V5 Won't Connect To Internet?

Oct 12, 2010

I am replacing a WRH54G with a WRT54G.  First I unplugged everything and waited 5 minutes. Then I plugged my ethernet cord from the DSL modem into the WRT54G. Then I plugged in the DSL modem. I waited for the lights to stop blinking. Then I plugged in the WRT54G and waited for LEDs to show connection. Then I plugged the ethernet cord from the WRT54G to the computer. Then I turned on the computer. I was able to access the Interface for the WRT54G but I was not able to connect to the internet. I tried power cycling multiple times both the DSL modem and the WRT54G. I was unable to access the internet. Finally I plugged the WRH54G back in and everything worked fine. why the old WRH54G can connect to the internet and the WRT54G cannot?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Can't Connect To Internet Or 192.168.1.1

Nov 19, 2011

My router used to work. I updated the firmware to 4.21. xx and after that I can't connect to internet.When I connect directly to modem, I can go to the internet . I power recycled etc but when I connect to the router, it says limited connectivity.  It shows autoconfigurtion ip:169.254.251.135. I don't know why this is so.I don't have the setup cd disk but I read the users' guide and it seems that I really don;t  need the cd. But no matter what I do , I can't get to 192.168.1.1 .

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g V5 Won't Connect To Internet

Aug 28, 2011

I have a wrt54g v5 router. I cannot connect to the internet through my router. I called the cable company and they told me that the router probably reset from a power outtage and reconnect.i power cycled, i tried to log onto the router via 192.168.1.1 but the connections were spanish to me.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Won't Connect To Internet

Nov 27, 2012

I have a WRT54G router and a Dell computer. I have been connecting wirelessly to this router with this computer for about 3 years. Now, the computer sees the router but it won't connect to the internet. I have other computers that connect fine, so I thought it was the wireless adapter in my computer. However, I went to someone else's house and connected perfectly.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Can't Connect To Internet At All

Apr 9, 2012

When i connect my computer directly to my modem i could connect to the internet but when i connect the modem to the internet port on the WRT54G and then connect my computer to one of the ports on it i can't connect to the internet at all.

View 5 Replies View Related

Linksys Wireless Router :: Unable To Connect Internet Using WRT54G?

Aug 13, 2012

Due to some reason I had to reset my linksys router WRT54G and now I am not able to connect to internet using my router. I tried coupld of settings followings some suggestion over internet sites but doesn't work for me. Still I get no network access message.

View 1 Replies View Related

Linksys Wireless Router :: Unable To Connect To Internet Through WRT54G

Sep 28, 2011

I am using the following model and version:
 
Model No.: WRT54G, Ver. 7.0
 
I am not able to connect to the internet through Linksys Wireless Router.  I have tried pinging the default gateway of the ISP provided router IP from the router utility, "Diagnostic", but I am not able to ping it.

View 7 Replies View Related

Linksys Wireless Router :: WRT54G Version 6.0 Can't Connect To Internet

Mar 13, 2013

I cannot connect to the internet via the wireless network from my router. Currently, I can connect to the wireless network, however I cannot access the internet, but I am able to access the internet with an Ethernet cable in the same router.This is a fairly recent development as we have used this router for wireless internet access (our modem has a wireless network built into it, but it is unreliable) for upwards of 8 months now without problem. One day it simple restored itself to the default name and we were no longer able to access the internet through the wireless portion.

Router: WRT54G Version 6.0

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g - Can't Connect To Internet After Updating New Firmware

Dec 6, 2011

i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware.

View 6 Replies View Related

Linksys Wireless Router :: WRT54G Can't Connect To Internet - Send Packets But Not Received

Jun 6, 2012

I have a Linksys wireless router model WRT54G (not sure the exact model, it's not in front of me right now). It has worked flawlessly for the past several years, but for some reason has recently stopped working. I confirmed it's not a problem with the DSL Modem, as I can hard wire connect to my laptop and the internet works fine. It's clear something is wrong with the wireless router. I've tried unplugging, hitting the reset button on the back, and nothing has worked. My computer is able to recognize/locate the router and connect, it's just that I can't connect to the internet. One thing I've noticed under the wireless connection is that the computer is able to "send" packets, but not "receive." My experience is that this is always the case when I experience connection problems, but I have no idea what that means. I was going to call the Help Line, but I see it costs $30 which is likely more than my router is worth and probably 1/2 to 1/3 the cost of a new one so I am trying to troubleshoot myself.

View 8 Replies View Related

Linksys Wireless Router :: E1000 - Watch HULU Through Player It Kills Entire Internet Connection?

Dec 17, 2011

I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.

View 2 Replies View Related

Linksys Wireless Router :: WRT110 / Vizio Smart TV - DCHP Connection Not Available

May 15, 2013

I have a WRT110 and a Vizio smart TV - just changed internet providers to NuLink to get a Mbps line - previously had AT&T DSL 1.5 - when tech power cycled router every laptop and smartphone in the house connected with no issue - TV did not connect (it was on during time tech was doing install) - attempted to connect with password, failed to connect multiple times - sometimes message 'DCHP connection not available' message was displayed - called Vizio, 1 hour and 9 minutes of troubleshooting with no success, according to Vizio tech all settings on TV good recommended I contact Lynksys and ask them to ' check 2 ports - port 80 and port 446' - also advise 'connection is autopopulating to 101' - I believe he was referring to the IP address request - router set to WPA2 personal - note that when I first got TV 3 months ago I was able to connect to router no problem, but I do not know if TV had connection the day we switched internet providers.  I do have 2 fixed IP addresses entered an one of them ends in '101' - I do not know if that is significant or not.  The main reason for the internet switch was to get the TV online, disappointed that I could not get it done. 

View 3 Replies View Related

Linksys Wireless-g / Wrt54g V6 - Unable To Connect To Internet?

May 31, 2011

OS - Vista Home Premium x32 I have a modem (Comcast) connected to my router (Linksys wireless-g /wrt54g v6) connected to my desktop which runs Vista.recently i am unable to connect to internet using my desktop, but I am still able to use my wireless devices such as wii, laptop, phone, ipad etc. with problem When I first boot up computer I receive error UPnP device host has stopped working. I close that and I have no network connections (linksys or LAN connections-icons) in my network and sharing area. Nothing is listed. When i click diagnose issue i receive the follow error A CABLE IS NOT PLUGGED INTO THE NETWORK ADAPTER "LOCAL AREA CONNECTION* 12" I have changed ethernet cords but still the same error. Nothng has been changed and as stated worked fine 2 days ago. I also did IPCONFIG and all i receive are ETHERNET ADAPTER LOCAL AREA CONNECTION* 12 MEDIA STATE.....MEDIA DISCONNECTED and so on. No IP address is listed.

View 4 Replies View Related

Vizio TV Sees Wireless But Won't Connect?

May 2, 2012

Have a Vizio tv that can see the wireless - NetGear router. The internet service is through HughesNet. Laptop, iPhone, and iPad have no issues connecting to wireless.

View 1 Replies View Related

Linksys Wireless Router :: How To Connect To VPN Using WRT54G Ver.6

Oct 22, 2012

I have a few devices at my home that connect wirelessly to the internet via wrt54g. I want to connect to the internet via VPN. I would like to find out if it is possible to connect WRT54G router to the VPN via PPTP or L2TP? The VPN company provided me with PPTP and  L2TP credentials. I can access vpn via OpenVPN on computers but I would like my TV connect to the internet also via VPN.

View 5 Replies View Related

Linksys Wireless Router :: WRT54G - Can't Connect To 192.168.1.1

Jul 26, 2012

I have a WRT54G router and although the local connection works the wireless does not. I have tried unpluging the router and replugging, holding the reset button for 30 seconds powering off 30 seconds and then plugging back it for 30 seconds. The ipconfig /all is below.
 
Windows IP Configuration
Host Name . . . . . . . . . . . . : TN-PCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : NoDNS Suffix

[Code].....

View 5 Replies View Related

DVR And Blu-ray Player Cannot Connect To Internet

May 10, 2011

I have a problem getting connected with my wired powerline network to my DirecTV DVR and Sony Blu-Ray player. I have had no trouble in the 2+ years I have used it until last weekend when my modem locked up.I first used the ISP's self-repair utility but it failed. I then rebooted the modem and router and got internet back but now the devices cannot connect.The DirecTV DVR HR20-100 reported it as connected to the network but not the Internet and the same with the Blu-Ray.

View 1 Replies View Related

Connect DVD Player To Internet

Mar 12, 2011

I've connected my Panasonic TV successfully to my router via cable using the Auto IPS Address setup. I'm now trying to connect the Panasonic Blu Ray player using the Auto setup but it says it can't find IP address and asks me to check the router.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Cannot Connect To FTP Sites?

Feb 1, 2009

I could not log into any of the 4 FTP sites that I normally update without immediately getting disconnected. The message I am getting from the servers is "Port command failed, error loading directory - disconnected". To save some time and posts, here are the facts....1.) It is definately not my DSL modem. When I connect directly with the modem, without a router, I can connect to FTP fine2.) I have already done a /flushdns in IPconfig.3.) I have already done the typical power off/power on/reboot procedure numerous times.4.) I have already tried PASV mode, and tried turning PASV mode off as well.5.) My login information is correct, and I have problems on multiple sites.6.) This problem has been reported before by other users of WRT54G, but the other forums I see have no solution to the problem.7.) I have already tried using other PC's and different FTP clients on my home network. No matter which PC or laptop I use behind the router firewall, I can't maintain FTP connection. 8.) I have never had to open ports to be able to connect to FTP, since I am the one doing the request. I did also try opening ports 20 and 21. 9.) XP firewall is disabled. 10.) I have tried both ethernet ports on my PC. But then again, that is irrelevant because none of my other PC's which connect wirelessly, can connect either.

View 5 Replies View Related

Linksys Wireless Router :: WRT54G - Unable To Connect On PC / Mac

Sep 8, 2010

I my parents have a WRT54G linksys router, they have a DSL modem.  Everything was working fine with the wireless network until one random day POOF! the wireless no longer would connect on laptops.  However, the internet is working just fine with the computer that is hardwired up throught the router.  Since this is working it lets me know that the router is working fine and routing the connection through hardwire.  Hard wired works on laptops but all laptops are unable to join the network and most of the time it will not show up in the list of available networks.Even my iphone wont connect saying unable to join network.  We bought a brand new linksys router and same problem.  I then took his old router to my house and hooked it up...and WOW it works as it should all devices can connect...even my iphone.

View 2 Replies View Related

Linksys Wireless Router :: Can't Connect IPOD To WRT54G

Dec 13, 2011

i have a LINKSYS  WRT54G router .. i bought an apple ipod touch recently  and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ?

View 2 Replies View Related

Linksys Wireless Router :: Can't Connect Android Through WRT54G

Nov 23, 2011

 I have a new android, MyTouch Q, through T-mobile.  The phone says it is connected and the wireless icon appears, but I can't access any data or websites.  I've done a hard reset, unplugged both the router and the modem for several minutes, called the phone manufacturer (LG), the carrier (t-mobile), and the internet provider (Cox cable).

View 3 Replies View Related

Linksys Wireless Router :: Connect WRT54G To PLSK400?

May 20, 2012

I owned a WRT54G and have been using it for years with no issue.I'm considering of trying to move this to another room by adding powerline network to the home with something like Linksys PLSK400.

View 1 Replies View Related

Linksys Wireless Router :: Connect Usb Printer To Wrt54g?

Jan 31, 2013

Is there a way to connect my usb only printer to my WRT54g router?

View 1 Replies View Related

Linksys Wireless Router :: Unable To Connect To WRT54G

Feb 20, 2010

Checked cable router (brighthouse), working. Router (all lights on but network traffic flashing indicates one way traffic). So I go to my wife's computer. It too has no connection. I open my laptop to connect to the wireless, IT WORKS! Pull power on Cable Modem and Router, wait 60 secs, power up Cable Modem and then power up Router (I know it wasn't nec to do modem but I wanted a clean start). Wireless is still working, no LAN. I can't even connect 192.168.1.1. Linksys software says it can't detect the modem. Reset time, hit the magic button in the back and sure enough everything stops working (which I figured). Still can't connect to it, and now I've lost wireless. I connect computer directly to Cable Modem and type this message. Seems to me that Router has failed.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved