Linksys Wireless Router :: WRT54G Port 80 Forward Fails

Sep 2, 2011

I encounter a problem setting up port 80 forwarding on WRT54g router.
 
Configuration:

- Numericable modem

- WRT54G router : portforwarding configured, accepting anonymous internet traffic, no DMZ, no port-triggering... in fact everything is fine except for ports 80/443

- Linux Ubuntu server + Apache2 listening *:80 and/or *:15001
 
1/ Situation 1: Apache listening on server's *:15001

-> Accessing from Internet (outside LAN) works very fine.

-> Portforwarding of router:15001 to server:15001 (TCP) works fine.
 
2/ Situation 2: Apache listening on server *:80

-> Accessing from Internet (outside LAN) FAILS.

-> Portforwarding of router:80 to server:80 (TCP) doesn't work. Diagnostic using the client machine's firewall tool showed the request doesn't get any return... no traffic back at all.
 
The system being fully operational when using port:15001 shows the problem does not come from server configuration.I still have to try a bypass of my router by plugging the modem directly on the server eth card.

-> If that works it would definitely prove the problem comes from the router, precisely the portforwarding feature as applied to port:80.
 
My guess is the following:

- As WRT54g router's remote administration interface is precisely set to listen 80/443 ports.

- As I still did not disable remote administration as I need it, but I will come to such extremities (very soon in fact as despair is gaining me

- Looks like WRT54g is unable to forward port 80 as this is it's remote administration port. You can set it up, but it just won't work, and there's no warning
 
Solutions?

- Disable remote administration? (will it work ? cause I would not risk to disable it for nothing...)

- Have remote administration litening on different ports than 80/443?

- Is my diagnostic correct ? (at least, does it seems to be...)

- (shall I get another device? Update to alternative firmware project?)
 
PS : I could be asked for ifconfig/netstats/hdw-fmw version, I would post later as I do not have access now.Looks like to me it is recurrent issue on WRT54g (maybe I'm wrong and just an **bleep** in LAN/WAN configuration which is highly possible)

View 3 Replies


ADVERTISEMENT

Windows XP Professional 32bit - Forward Port 88 On Linksys WRT54G Version 6?

Mar 1, 2011

I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.I'm trying to forward port 88 on my Linksys WRT54G Version 6.I tried that but Boardwave audio streaming server still says it's not open!Here are some pictures: I'm using Windows XP Professional 32-Bit

Eset AntiVirus
and using Windows firewall

View 7 Replies View Related

Linksys Wireless Router :: WRT54G - Network IP Address Fails

Feb 4, 2013

I am using Linksys WRT54G ver 1.05, XP Pro, DSL Modom & IP Address 192.168.1.104 Fails

View 3 Replies View Related

Linksys Wireless Router :: E1000 Can't Forward A Port

May 15, 2013

I have my router set up and life was good. i now want to forward a port. i go into apllications/gaming put the application name, the port i want to forward and click enable. Save changes and i get a changes save message. When the browser goes back to the applications/gaming screen no port shows as being forwarded. If i go to canyouseemenow.org the port shows as being closed.

View 3 Replies View Related

Linksys Wireless Router :: How To Port Forward An EA3500

Aug 7, 2012

Windows 7 64 bit  /  Linksys EA3500  /  (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased  the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500? 

View 2 Replies View Related

Linksys Wireless Router :: Wrt310N - Trying To Forward A Port?

Nov 25, 2011

Having a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Port Forward To Broadcast For WOL?

Jan 25, 2011

Some routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?

View 9 Replies View Related

Linksys Wireless Router :: WRT55AG V2 Cannot Port Forward To A Web Server

Mar 19, 2007

I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off

View 3 Replies View Related

Linksys Wireless Router :: E4200 / Open Nat / Port Forward Xbox?

Aug 13, 2012

I'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Failed To Port Forward Properly

Apr 5, 2012

A while back, I had my own minecraft server running. I had everything working and it was flawless. Then for some reason it just stopped working. I was Unable to open ANY PORTS. I did happen to try 65 - 110 and 254 - 210, as well as 12, 212 and 122. I dopnt know what happened but i have been searching everywhere on the internet (roughly 3 months)

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Forward Port 5900

Sep 27, 2012

I think i have tried everything i could think of to forward port 5900 with no luck. iIhave e4200. it is for RealVNC application. I followed steps from here: i have windows 7 and nortonn internet security. i disabled the firewall and added a rule to forward port 5900 in windows but did not work either.

View 9 Replies View Related

Linksys Wireless Router :: WRVS4400N Port Forward Is Not Working To FTP Service

Feb 17, 2012

I've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.

View 1 Replies View Related

Linksys Wireless Router :: Port Forward With E1200 / IPv4 Address

Apr 22, 2013

I'm trying to set up a minecraft server i have the correct ipv4 adress and port but for some reason its still closed?

View 7 Replies View Related

Linksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?

Oct 12, 2012

Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?

View 1 Replies View Related

Linksys Wireless Router :: Port Forward With EA4500 Cloud Connect Firmware?

Jul 11, 2012

Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389.  In the old web admin page this option was easy to find and change.  with the new cloud connect I can't find it.  how do Ienable port forwarding on the EA4500? 

View 3 Replies View Related

Linksys Wireless Router :: Cisco E3000 Port Forward Settings Won't Save

Nov 28, 2011

i am trying to port forward my router so that i can run a minecraft server.  When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't.  I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds.  None of this works. 

View 2 Replies View Related

Linksys Wireless Router :: Port Range Forwarding Fails E1200?

Aug 21, 2011

I have configured port range forwarding (8440 - 8449) for a single PC (192.168.1.134) and am unable to access these ports from outside my LAN. Conversely, if I set up single port forwarding for each of the ports in the range for the same computer then I am able to access from outside my LAN. Does port range forwarding actually work?
 
E1200 / 1.0.00 build 11 Jan 23, 2011

View 1 Replies View Related

Linksys Router Unable To Forward Port 80 / 443

Jan 19, 2013

I have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.

View 1 Replies View Related

Linksys Wired Router :: BEFSR41v3 Need To Forward A Port

Feb 12, 2012

i Have a router called Linksys BEFSR41v3 i need to port forward a port but it just wont open i loggerd in on my router using 192.168.1.1 after i click applications & gaming started the port on 100 and ended on 100 used ipconfig in cmd to find me ipv4 adres and putted in ip adress box also both protocol are on and i clicked the enabled function also i tried also got a static ip i used canyouseeme.org to cheak if my port is open it still says its not open.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G V8 Port Forwarding?

Mar 30, 2013

I'm trying to forward my ports and I've been following a guide from [URL]. It's simple, but it's not working for me. I couldn't find my router on their list, so I'm assuming the worst and that it's not supported for the Port Forwarding. I just went with the normal WRT54G without the version 8 and tried it that way, I didn't get anything out of that either. It keeps telling me that the port isn't open and I can't receive the information packets that they're sending me. 

View 3 Replies View Related

Routers / Switches :: Linksys E3000 Router Will Not Forward Port 443

Dec 20, 2011

I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.

View 8 Replies View Related

Linksys Wireless Router :: WRT54G - Port Forwarding Setup

Feb 12, 2012

I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep changing the ip address for the forwarding settings every time your network refreshes. But I cant seem to have it set up. And is there a rule that the static ip that you set should not be within the dhcp range?After setting up the static ip and setting up the port forward settings how do I test if the port is being forwarded correctly?

View 1 Replies View Related

Linksys Wireless Router :: Why WRT54g Only Showing 1st LED Port In List

Dec 18, 2012

Why is my WRT54g router only showing the 1st LED port is lit, and not the rest when I have changed or added a device to the 2nd,3rd,4th port? It is also stopping my ability to stream,view youtube etc. When I disconnect the router from my cable provided modem, everything works fine?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Incoming Log Destination Port 520

Aug 8, 2012

my WRT54G has been configured to block any and all incoming connections.continue to have disabled all port forwarding, port triggering, the DMZ, and QoS, via the applicable tabs under the [Applications & Gaming] Panel. The WRT54G continues to be configured to operate as a Gateway.No static routes are defined. The routing table show four entries, none of which are remarkable or match in anyway the partial address identified above.So I am under the impression that my WRT54G should be ignoring everything from the WAN-side.Even pinging the WAN-side of my router from the outside internet times out.My WRT54G ver 6 is at firmware level 1.02.8, which, as far as I can tell is the latest issued by Cisco.I am completely perplexed how such a connection is being established, and do not know if it is or has the potential of causing any harm. My own research indicates port 520 is typically used for RIP protocol, but I have almost zero knowledge of such.

View 9 Replies View Related

Linksys Wired Router :: BEFSR81 Will Not Save Port Forward Info?

May 17, 2011

BEFSR81 will not save port forward info.  I am trying to setup port forwarding for xbox (53, 80, 88, 1863, 3074), I click on enable to the far right and then click save at the bottom.  It says settings are succeful, will return in 5 seconds.  When it returns everything is zeroed out.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Port Forwarding Suddenly Closed?

Oct 12, 2011

i have a 54G wireless home router ..... successfully port fowarded an application from a CPU (server).... but after no connection made from the user to the server.....  it suddenly close the application ..... so what i did is to reboot the router in order to refresh the connection ......  Is there any other ways to fix this sudden close of the ports ?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G - Default Username And Password For Port Forwarding?

Jan 24, 2013

I have a WRT54G Linksys router and I am wondering what is the default username and password for port forwarding?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N How To Set Port Forward

Mar 2, 2011

I Just bought this Linksys Modem/Router and i still can´t believe that my cheap dlink DIR600 or my OLD SAGEMCOM can set IP to all my machines but this WAG120N cant!and Worse,  how will i set port forward if i don't know which IP the machine will get?is there any firmware or MAGIC ??

View 4 Replies View Related

TP-Link Dual-Band Wireless :: Port Forward Through TD-8817 Modem > TL-WDR-3600 Router > PC?

Mar 13, 2013

Region : Ireland
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP : Smart

I have

A TP-Link TD-8817 Modem with IP Address 192.168.1.1
A TP-Link TL-WDR-3600 Router with IP Address 192.168.0.1
A PC with IP Address 192.168.0.100

I figured out that I can only enter an IP Address with the range 192.168.1.* when port forwarding on the modem, ie I cant enter 192.168.0.100 for the PC.Is there any way of Port Forwarding to the PC?

View 2 Replies View Related

Port Forward Through 2 Routers - Linksys E1000 / Westell 7500

Feb 20, 2012

I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.

View 2 Replies View Related

Linksys Cable / DSL :: Wrt54gx4 - Dhcp Setting And Port Forward?

Feb 18, 2012

dhcp setting and port forward

View 3 Replies View Related

Linksys Cable / DSL :: X3000 Doesn't Save Port Forward Rules?

Mar 14, 2012

over my port forward GUI in my new linksys x3000. When I try to save any new port forward rules (new or using predefined), the setting are not saved when I get back to the configuration screen again. Nothing seems to get configured.
 
Have just uppgraded firmware to v1.0.01, but no difference.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved