Linksys Wireless Router :: WRT54GL - Have To Reset Few Times Per Week?
May 28, 2012
We recently exchanged our old WRT54G with the current model WRT54GL. Unfortunately we have to reset the WRT54GL router a few times per week. We noticed that when one of the clients -- an iPod Touch -- is not being used on the wireless network (that person being away), the router runs without failing. I would suppose router reliability should not depend on the clients that it serves. Is anybody familiar with a similar problem? Is there a way to prevent the router from failing so
View 5 Replies
ADVERTISEMENT
Jan 23, 2013
I am considering buying the new router with the new wireless ac ability, but wanted to ask a couple questions first.1. If I have the router bridge combo that utilizes the 5 mghz bandwidth, but also have older devices that run only on the 2.4 ghz frequency, will the router work both frequencies or will it change to 2.4 only? Like with mixed N that has a device that is g.2. Will all my older devices work without upgrading wireless cards?3. If I use the bridge in a seperate room, approximately 30 feet away with 1 wall in between should my speeds stay pretty high?I am planning to get the special they are offering for the 6500 plus the bridge, that gives the 50 dollar debt card, not sure of bridgemod3l number but think only one Iis available in that deal. So sick of my wrt330n needing to be reset 3 times a day.
View 1 Replies
View Related
Apr 14, 2010
I want to use my router to boost the signal to the 2nd floor of my house, and Im having some problems.When I connect my router to the web application to change restore it to manufaturer setting the router keeps broadcasting my old SSID. The laptops in the house pick up that signal. I want to reset my router so it can broadcast my new network.
View 2 Replies
View Related
Oct 6, 2011
i have verizon fios and a MI424WR-GEN2 REV E and the past 2 months i woke up to find all of my devices, 2 win7 laptops and a droid through wireless and an ubuntu desktop through ethernet, wouldn't connect to the internet (through the fios router). i did a firmware update, but it's still breaking every week or so.
View 2 Replies
View Related
Jul 25, 2012
i have a wrt54gl version1.1 ok so let me start from the beginning.a few months ago i left the contry so a friend of mine asked me to lent him my router. a few day`s ago i got back and got my router back. it was working fine until i got it back. the rest button won`t work. i can`t reset the router to factory default. the user name was blank and the password was admin.now it won`t let my to do that.
View 9 Replies
View Related
Oct 10, 2011
I changed my E1000 router name successfully, and then went into the Administration section to change my password. After changing the password and clicking on Save a small screen pops up asking me to verify my router's username and password. When I enter the exact same user name and password it does not accept them. When I try to enter the old user name and password it does not accept them either. I then try combinations of the two and it still will not accept the input. I have reset my router 4 times now and this keeps occurring. I am completely baffled.
View 6 Replies
View Related
Oct 21, 2011
I bought a few months ago a WRT54gl router for home use. It works nice and everything, but today was the second time it totaly resetet without pressing the reset button. Why the router is resetting by its own?
View 1 Replies
View Related
Nov 1, 2011
all other devices have excelent signal
View 5 Replies
View Related
May 20, 2010
I originally began with a WRT610N(basically the old version of the new E3000). I had been using it for a couple months, when all of a sudden I was stuck with the power light flashing, meaning the firmware was corrupted. I contacted support & they guided me through the process of trying to restore the firmware through using the tftp.exe program with no luck. Unfortunately at the time this happened, the E3000 was just being released, so they stated it could be close to a month to get a replacement WRT610N! So I decided to just go grab an E3000 from BestBuy, as I had some unused giftcards for there. I bought the E3000 & used it for literally 2 weeks, then the exact same problem! Power light flashing, firmware corrupted. Again I tried to restore the firmware with no luck. I should mention, each time I tried pinging the router after setting a static IP it resulted in a 100% packet loss, meaning the router was not even communicating with my PC. So with it being within the 30 day period, I just went & swapped it for a new one. Went and swapped for another, so I am now on my 3rd E3000 in less than a month! What could be causing this? I notice the router does get fairly hot, but i have it in a well ventilated area, so not sure what more I can do about that.This is supposed to be the highest end LinkSys router out there & I continue to have major issues with each of them. Now I do pull a lot of data through it. I have a NAS, 3 PC's, PlayStation3, Xbox 360, Wii, iPad, multiple notebooks, etc. on a 18Mbps Comcast cable connection. But shouldn't this thing handle high amounts of data? I mean it's the highest end router LinkSys makes, so what do I need to do? Buy a true Cisco router for $1,000 for home use?
View 9 Replies
View Related
Sep 20, 2012
I have an EA3500 that I installed recently to replace an old NetGear Router, everything works fine like a charm and suddenly is like the router goes down, both wired and wireless connections go down, no connection at all to the router, no internet, no nothing, the power stays on, but you can see the Leeds on the back blinking like when you do a reboot, then after a couple minutes everything comes back again, till the next drop...it happens several times a day, sometimes 3 to five times in an hour, some other times just happen 2 or 3 times a day... I have tried everything possible, changing the settings, factory defaults, firmware upgrade and roll back, MTU, different channels, even different power outlets to no avail.I wonder is I have a lemon, the worse part is I can't return to the store since the UPC code is gone (rebate) and links says they can't take it back as RMA.
View 3 Replies
View Related
Jan 23, 2011
I have a WRT120N router .It has something to do with turning on or re-introducing certain wireless devices into the area. When I come home with my iPhone & my wife is on her computer, suddenly the wifi stops. And vice-versa. It's ridiculous. I'm not a computer programmer but if I was I'm pretty sure this would be a no-brainer to fix. Especially if the company that paid me took pride in their products.
View 8 Replies
View Related
Apr 9, 2012
my router drops connection several times a day. I have to unplug the router every day so that my devices can stay connected. I hate when this happens late at night when i'am upstairs and have to go 2 stairs down to get internet on my devices. For example if i want to connect my iPhone to my Wireless network it gives me an error with: 'No connection can be astablished with this network'.
View 1 Replies
View Related
Apr 11, 2011
my E4200 is dropping connections several times a day. I'd be working on my laptop, go to a webpage and bang, no connection. A minute or so later it would reconnect. It even appears to be doing this with a computer that is hardwired to one of the ports. So it doesn't seem limited to just wireless. Happens to both N and g channels as well.
View 9 Replies
View Related
Nov 20, 2010
I just bought WRT54GH router. I have one PC (running Ubuntu) connected via Wireless.Every 5-10 minutes I get disconnected for a short period of time (about 10-30 seconds). During that period I am able to access router configuration page, but can't connect to the "outer" world... Surely it's not about my Internet provider, since connecting the PC directly to the Internet cable works fine with no "disconnections".
View 9 Replies
View Related
Dec 18, 2011
I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown
View 2 Replies
View Related
Feb 22, 2012
I have the WRT310N v2 and having been having an issue with the Facebook games for the past week. I can logon to facebook just fine, but when I try to go into a game or accept gift requests, nothing works and the page always times out. However, when I disconnect the modem cable from the router and plug it in directly to the desktop, everything works fine. All other websites (Shockwave and Pogo) work just fine, but just Facebook has the problem when the router is connected.
I went through all the settings for the router. Nothing is blocked and everything is in fine working order. The only thing I noticed was that there was a firmware update to 2.0.01 which I did, and still the problem remains. I've made sure that there are no restrictions on IE or Chrome as well. I first thought that the router was crapping out, but have since disregarded that.
View 2 Replies
View Related
Apr 3, 2007
How I can block out Xbox Live at certain times? I want it to shut off at 9 pm cause sometimes I work late and my daughter cannot tell time. I do know which ports I need to block but when I put it in the blocked services and put it the allow time, it still blocks it all the time. I have the wireless router with speed boost but no version.
View 5 Replies
View Related
Oct 14, 2011
I check all of the settings and changed the channel to see if it works. For some reason it disconnects my wireless internet at random times and i know before it never use to do that before with a older router. There is nothing blocking it, it worked before, and my computers can connect except two. The only thing i can guess is my wireless card.
View 6 Replies
View Related
Aug 1, 2011
I am now on my second E4200... But still the same failure.. It looses the internet connection 5-6 times a day, and then I have to switch it off and on to get connection again.
View 9 Replies
View Related
Jan 5, 2010
For some reason my ps3 wont connect,the signal strength is 100% but it just times out.it will randomly connect BUT cant stream anything or connect online.Or it will get disconnected if someone turns on my mine computer in the other room/Should i DMZ the ps3?Routers a WRT610N dual N Firmware Version: 2.00.00 B05 cant upgrade to 3.00 because of "upgrade failed" error.
View 9 Replies
View Related
Jan 27, 2012
My WRT400n has started dropping the wireless signal 4 to 5 times a day. Somet times it fixes itself but most of the time I have to re-boot the router to connect a wireless signal.I looked for a firmware upgrade but there hasn't been one since 2009.
View 4 Replies
View Related
Aug 6, 2011
I started using E4200 few months ago. It used to have frequent disconnection with E4200 when it's running on router mode back then. After playing with the MTU from 1492 (recommended by ISP) to 1364, it's seems to be quite ok until recently.It is getting worst than before. It disconnect my internet almost few times in 5 minutes.
[CODE]...
View 3 Replies
View Related
May 2, 2012
I have both a Sony XBR52HX909 and a Sony BDP-S580 connected to my router (WRT54GL)via ethernet. When I try to connect to the internet, both show the wired connection as good but neither can connect to the internet. The BDP-S580 also has wireless connectivity, but it can’t connect to the internet wirelessly. I have two desktop computers connected via ethernet and two laptops connected wirelessly to the same router and all have internet connectivity. I have tried the “auto” settings on the TV and Blu-Ray player and also tried entering the network information in manually. I still can’t connect to the internet.
View 5 Replies
View Related
Feb 5, 2011
Last week suddenly my internet connection failed. I have tried several times to establish the wireless internet connection. Everytime when i tried to do this, i get the message 'can not get IP address'. Already tried to upgrade the firmware but still same message appears.
View 4 Replies
View Related
Nov 10, 2011
I have Wireless-G Broadband router Model WRT54GL. Everything is all setup correct but consoles and handhelds can't get the IP address even if there connected to the router. It isn't intill I turn off and then it back on does it get the ip address.
View 2 Replies
View Related
Jun 20, 2012
I'm trying to use a WRT54GL with U-Verse. The problem is that the router does not get a connection to the modem. It can't ping the modem, and it doesn't show up on on the list of devices connected to the modem. DHCP assigns an IP address of 127.0.0.1, which is outside the range of the modem [192.168.1.1 ... 192.168.1.253]. The router is also showing a default gateway of 0.0.0.0, and a subnet mask of 255.0.0.0. (And yes, I have released and renewed the lease, rebooted the modem, and reconnected the modem.) The router WAN side is set to DHCP, and the operating mode was changed from gateway to router (the gateway setting doesn't work either, for that matter).
View 9 Replies
View Related
Mar 16, 2011
I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP.
I know that 802.11n has a max bandwidth of 300 Mbps, and it would work for intra- house transfers, such as streaming video from one computer to another.
But is there any benefit to 802.11n for Internet activity, such as web browsing, gaming, and streaming video from Netflix.
View 3 Replies
View Related
Nov 10, 2011
The wireless drops specifically from my laptop constantly at random times. When the wireless drops in order for me to be able to reconnect i have to restart the router itself. There are also random times where the Wi-Fi stops broadcasting altogether. I have a computer connected via Ethernet and it does not lose connection during these times. All the computers are running Windows 7 and the Router is up to date on firmware.
View 5 Replies
View Related
Feb 8, 2012
Had an E4200 for a couple of months now and have not been able to resolve an issue with the router dropping an Apple iPad 2 at random times.The E4200 is replacing a Cisco Aironet 1200, which never dropped any clients, iPad 2 or others, and never displayed any of the issues below.
TECH DETAILS:The E4200 is being used purely as an access point. All extras are not in use and are disabled.
Firmware 1.0.03
Hardware version 1.
BASIC ISSUE:The E4200 drops an Apple iPad 2 off the 2.4 Ghz Mixed (B, G, N) network. The user must then select the network to rejoin. Rejoining occurs without incident. The same issue occurs when the network is restricted to B, G. The drops occur at what appears to be random intervals - sometimes 10 minutes apart, sometimes hours apart. We can have as many as 6 drops in an hour. A ping to the apple ipad shows the device stops responding to pings about 10 seconds before the user is prompted to rejoin a network. Meanwhile, a ping to the E4200 itself from a laptop connected via the E4200 on the same radio as the ipad continues to work without fail during this incident.
1. The iPad 2's cannot connect to the 5Ghz radio. I believe iPad 2's are supposed to support 5Ghz.
2. Both our Apple TVs do not connect to the 5Ghz radio: they fail with a "There was an error connecting to the network. Check your settings and try again. (-3914)" error. Apple TV supports 5Ghz.
3. The admin interface for the E4200 is very slow sometimes. Probably over 20 seconds to render some pages when it gets really bad. As a comparison, Internet-based pages on fast sites that delivered via the E4200 itself load in less than 2 seconds.
4. The HTTPS version of the admin interface can only be connected to via Safari browers. Both Internet Explorer 9 and Chrome 16 fail to connect with a "Connection reset" error. In Chome, it says "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." This is across multiple devices. There is no issue with straight HTTP.
All other devices - including Macs and PCs - connect fine with the E4200 on both 5Ghz and 2.4 Ghz radios, even if they cannot access its admin interface via HTTPS.I've presented quite a few issues above, but the main one is the drop outs for the iPad 2 devices. I'd present logs on drops, but the thing doesn't record any useful logs.
Basic wireless config:
5Ghz:
Network Mode: Wireless-N Only
Channel width: Auto (20 or 40 Mhz)
Channel: Auto (DFS)
SSID Broadcast: Enabled
[URL]
View 9 Replies
View Related
Aug 21, 2011
I have a E4200 updated to the latest firmware I have problems with the wifi on the 2.4GHz band, in fact, at power on, many times wi-fi on the 2.4GHz band doesn't work but the 5GHz band works normally. After some reboots the wi-fi operating normally on both bands.
View 9 Replies
View Related
Aug 26, 2011
I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times. Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this. How to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router
View 4 Replies
View Related
Sep 7, 2011
I recently had to unplug my Linksys WRT54GL wireless router when doing some rearranging and now i'm unable to get a internet connection. I've confirmed the modem is actually working by connecting my laptop directly (which worked), but when I connect the Linksys WRT54GL wireless router to my modem the internet connection goes away. The connection is lost when connected via wireless and hardwired to one of the back ports. I've tried resetting the modem, router and computer and read every forum out there trying to find something, but i'm still stuck.
View 5 Replies
View Related
May 8, 2013
I have a problem with my linksys WRT54GL router. I entered here [URL] and i set it up, i can connect to internet on my PC and wireless works great but i can't set wireless password and name. When i go to the wireless tab, i write the new name but when i hit seve setting i get disconnected from internet. I try to go to status and click on Connect tab, when is connected internet works but the name and the password of the wireless that i set earlier is reset to default. What do i have to do to set name and password and have internet at the same time.
View 7 Replies
View Related