Linksys Wireless Router :: WRT610N Ports Showing Closed When Tested

Dec 18, 2012

We have a WRT610N and are having trouble getting access out to the internet with an FTP client.We are trying to configure Sync2 a program from It is an MS Outlook application that utilizes FTP servers to host .PST files (outlook data bases) for synchronization.The software has an FTP client built in that can access FTP accounts to store and synchronize the .PST file.
The issue is the WRT610N will not allow this client to connect to our FTP account.   We had 4Team’s tech support working on it for a few hours. Ultimately they decided it was my router causing the problem. To demonstrate this to us, they tested ports 80, 21, & 22 utilizing the following websites: url...
All the ports showed either closed or not responding.How do I open these ports so that I can allow Sync2 to communicate with the our FTP account?  We are hosting out FTP site at

View 3 Replies


Linksys Wireless Router :: Ports Not Forwarding On Wrt610n

Jun 12, 2012

I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?

View 9 Replies View Related

Linksys Wireless Router ::WRT54GS2 - Ports Are Not Showing Activity

Mar 23, 2012

I have a Linksys model WRT54GS2 with 4 ports, with Ethernet cables connected to ports 1 and 2.  I have a laptop connected by wireless connection, with only an Xbox connected using Port 1 and occasionally port 2.  Just recently, port 1 shows no activity.  When connected to Xbox it doesn't display a check mark showing connection but does with port 2.  I've connected it to port 3 and 4, which shows a check mark but won't connect to Xbox live.  It's like port 2 only works, what I can do to "fix" ports 1, 3, and 4?

View 1 Replies View Related

Wireless :: Ports Forwarded But Test As Closed?

Oct 25, 2011

I have my 2Wire AT&T U-Verse router properly set up to forward the port 25565 from my machine. (Incidentally, gives me a blank page when I try to look up how to do this.) However, when I test the port is indeed open ( Open Port Check Tool - Test Port Forwarding on Your Router ), it returns as closed. Yes, I'm running the server software while I run the test. I only have the Windows Firewall, but I ran attempts while the firewall was completely disabled as well as with just the appropriate programs allowed.

View 9 Replies View Related

Linksys Wireless Router :: E4200 V2 Tested HDDs List

Jan 5, 2012

I'm looking for an updated list of tested and compatible external HDDs that the 4200V2 will support f(media streaming).  Any updated list?Clarify that the following references to "WD 1.5 & 2 TD" translate to WD My Book Essential Edition 1.5 & 2 TB as opposed to the WD Elements HDDs? There has to be a better list than the one in FAQs.

View 1 Replies View Related

Linksys Wireless Router :: List Of Tested External Hard Drives For E4200?

Nov 13, 2011

The official List of tested USB storage devices for the Linksys E4200 is so short, and the fine print "If your USB storage device is not listed on the table, it is not guaranteed to work with the router" is very discouraging. Let's create the community-based list of tested External Hard Drives for the Linksys E4200? Post here the brand / model of your external hard drive which works well with your E4200. State Firmware version as well. My Toshiba 640GB Canvio® USB 2.0 Portable Hard Drive (Toshiba P/N e05a064cau2xr, M/N 593400-b), when connected to E4200 Firmware v1.0.03 (Build 14), stops the router's both wired and wireless connection after a couple of hours.

View 9 Replies View Related

TP-Link WR740N - Ports Still Closed After Forwarding?

Jan 23, 2013

Ports are still closed after forwarding them dont know why am using TP-LINK WR740N.

View 3 Replies View Related

Netgear Wnr3500v2 - Ports Closed After Forwarding Before Timed Out?

Dec 1, 2011

I have a problem trying to forward ports needed for steam: my connection to internet looks like this Cisco epc3212 cable modem -> netgear wnr3500v2 ->my pc, all via ethernet cable I set up static ip for my pc and forwarded ports in router but after checking results on web port scanners it only changed from timed out to closed. I have no firewalls, neither on my pc or router, i called my isp and they told me they don't block any ports. I have windows 7. After trying dmz all my ports remain closed except for 3389 which is remote access for windows. been working on this for past few hours and i'm loosing my mind .

View 5 Replies View Related

Security / Firewalls :: Disabled Windows Firewall But Ports Closed?

Jan 16, 2012

I have disabled windows firewall in Windows 2003 server control panel but only few ports are shown opened when i scanned with advanced port scanner why other ports are closed.How to open the closed ports?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G - Port Forwarding Suddenly Closed?

Oct 12, 2011

i have a 54G wireless home router ..... successfully port fowarded an application from a CPU (server).... but after no connection made from the user to the server.....  it suddenly close the application ..... so what i did is to reboot the router in order to refresh the connection ......  Is there any other ways to fix this sudden close of the ports ?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Notebook Screen Closed / Went To Standby Mode / Stopped Upgrade Process

Jan 18, 2012

I was upgrading the firmware of the WRT54G router when the notebook´ screen closed and it went to standby mode. It was stoped the upgrade process.Now only the ports and Internet LEDs light up, but the power LED is off.I also cannot connect to thenavigator for show the administrator´s window. Any procedure to recover the operation of the router in a situation like this?

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Isn't Able To Connect At All

Dec 25, 2009

I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.

View 3 Replies View Related

Linksys Wireless Router :: Getting Multiple 360's On WRT610N?

Jul 12, 2011

How can I open the Nat for both systems on my single router.

View 2 Replies View Related

Linksys Wireless Router :: WRT610N And PoE For WAP4410N

Jul 26, 2011

I was told that this router would push the PoE to the WAP4410N. I hooked the AP up to port 1 and no lights or anything... The network is all cat6, patch cords are cat6 shielded if this matters at all... what am I missing.

View 3 Replies View Related

Linksys Wireless Router :: USB Storage On WRT610N?

Jul 1, 2011

Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?

View 1 Replies View Related

Linksys Wireless Router :: WRT610N - Block All XXX URL's?

Dec 20, 2011

I have the Linksys WRT610N wireless router and would like to know if it is possible to block all domains ending in .XXX?  The access restrictions let you type in a 'specific' URL, but using a generic domain name doesn't seem to work.  I basically want to block all access to any URL that ends in .XXX.

View 5 Replies View Related

Linksys Wireless Router :: WRT610N V2 Not Broadcasting 5 Ghz?

May 13, 2012

I just bought a certified refurbished router. The model is WRT610N-RM. Where's what I've done:
1. Downloaded newest firmware from the site using old router, Then disconnected. Connected a lan cable to the new router. Powered up the router. Held down reset untill the light blinks. Went to the browser and typed Entered password to go into router and upgraded firmware.  2. 5 Ghz Settings: Went to Wireless menu. Selected "manual", mode is "mixed" (If i chose N only for 5 Ghz, then It won't save my setting for internet security. Instead it will be "disable" no matter what". The rest was default. SSID is enabled. Then I set up the 2.5 Ghz. I have 3 other computers with N wireless card. Some others have G, however when I viewed available networks, I only see the 2.4 Ghz ssid. I tried to reboot and unplug power for 10 seconds, but no luck seeing the 5 Ghz.

View 6 Replies View Related

Linksys Wireless Router :: Get Open Nat For Mw3 On Ps3 WRT610n?

Nov 15, 2011

ive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.

View 2 Replies View Related

Linksys Wireless Router :: WRT610N - Way To Set Up Port Forwarding

Jun 26, 2012

I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via [URL]... The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.

View 9 Replies View Related

Linksys Wireless Router :: WRT610N Seems To Lose Radio

Mar 18, 2012

I have had no problems with my WRt610N fo 2 years. Yesterday a problem occured and today again. Namely, I opened my laptop (the lid) and suddenly it could not see my network (SSID) among the rest of the neighbouring ones. The WiFi indicator in the tray showed the yellow "!". Since I have another (secondary) router wired to the primary (WRT610N) I tried and succeeded to connect to it (same SSID, but type "g").
Today the same situation. This is the straneg thing - if I 1st connect to the "g" router after a while the WIn7 reports my SSID being of type "gn" meaning it now sees the primary WRT610N. If I switch off the secondary the netowork is maintained by the primary router showing "n". It seems like my laptop cannot see my router (but can see all other networks) until it 1sr connects to the secondary, and afterwards it sees the primary router and can stay with it.

View 1 Replies View Related

Linksys Wireless Router :: Reading WRT610N Logs?

Feb 4, 2010

Is LinkLogger the only option for reading logs on the WRT610Nv2? I read about Linksys's own software called LogViewer 1.14 but I can't find it.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N URL Filtering Not Working

Aug 3, 2012

I am trying to filter a URL, facebook and it is not working.  I have tried rebooting the router and it is still allowing access.  I have provided the settings and ranges for PCs.

View 3 Replies View Related

Linksys Wireless Router :: WRT610n No Power / Won't Turn On

Dec 27, 2011

My WRT610n went out today for no apparent reason.All of my other peripherals are still running, but the router won't turn on.  I've tried different transformers, outlets and powerstrips, with no luck -- no power.  I've also tried a hard reset on it, with no luck. 

View 3 Replies View Related

Linksys Wireless Router :: How To Block Facebook On WRT610N

Feb 22, 2011

How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?

View 9 Replies View Related

Linksys Wireless Router :: Macbook Pro And 5.8 Ghz Channel On WRT610N?

Feb 17, 2010

Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N.  I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel.  Linksys support told me that the hardware was not compatible with the high channel.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N - Connect To Smart Tv?

Oct 10, 2011

To connect my new "smart tv" with my wireless linsys WRT610N, smart tv ask to take off all protection such as firewall and antivirus. Doing so, I cannot connect my laptop with my router. Is there a solution to connect both at the same time?

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Incompatible With Bonjour

Sep 10, 2009

I read an earlier posting about an issue between SPI on the latest WRT610N Version 1.0 firmware and a user's Apple TV. This pointed me to a "solution" to a perplexing problem I was having.
I have 4 machines, 3 connected via WiFi and 1 on one of the wired ethernet ports. I also have 2 Apple Airport Express units for audio streaming as well as 2 iPhones connected wirelessly.
Now for the symptoms, which are all new since updating to firmware ver.
1. The WiFi machines see the Airport Express units and can stream audio to them. However, the iPhone Remote app has trouble staying connected to iTunes running on any of these machines.   A router reboot is a temporary fix, but connection is eventually lost again.
2. The wired machine cannot see the Airport Express units, nor can the Remote app pair with iTunes on that machine. It's as though no Bonjour-related functions work. Here, a router reboot also provides a temporary fix, but one that lasts only minutes.
Based on that prior post, I disabled SPI on the router and, lo and behold, the wired machine suddenly sees all Airport Express units and can pair with the iPhone Remote app!
I was going crazy, verifying that I was not having Windows Firewall issues, that there wasn't an incompatibility with Windows 7 (which I'm running on all), that this wasn't a Homegroup incompatibility of some sort, that Bonjour was up to date, etc. Only turning off SPI fixed the problem entirely.
So, Linksys ...Any firmware bug fix in the works for this? Can I safely go back to the prior firmware update without security or function concerns? If so, where can I get my hands on the older firmware file?

WRT610N Version 1.0 running

View 9 Replies View Related

Linksys Wireless Router :: WRT610N V2 Speed Limitation?

Oct 3, 2011

i used my 610N v2 for 2 years and recently i upgraded my network from 100mb to fiber 500mb , however, if i directly plug the lan cable to my computer , i can get full speed , but with 610N, the speed is limited to 130 for both upload and download .i had already upgrade my firmware and did factory reset, none of them work. Is it the limitation of the router ?

View 1 Replies View Related

Linksys Wireless Router :: QOS On WRT610N Causing Slow Down?

Jun 30, 2011

For some reason, I have been trying to use QOS for several network related jobs (VPN, streaming). It would seem that when QOS is enabled and the appropriate ports are set which a high priority, the speed of my connection drops to a crawl. When I disable QOS, I'm flying again. I have confirmed ports, and protocol types (TCP or UDP) and nothing seems to work.

View 2 Replies View Related

Linksys Wireless Router :: Expired Certificate On WRT610N

Jan 16, 2009

I just purchased a WTR610N and when I connect to the admin interface over SSL it gives me a cert that expired on 12/31/1970.  I updated the firmware and that didn't change anything.  How to get it to use a valid cert?

View 9 Replies View Related

Linksys Wireless Router :: How To Connect Two Cisco WRT610N

Dec 28, 2011

I want to connect one "wrt610n router" to modem directly through Ethernet cable and when i connect both of them every thing is working fine and iit gives proper internet connection through WLAN [code] But, when i tried to connect "second WRT610N router" through "first one WRT610N router" through LAN_cable(cat 5) then second router do'nt provide(give) internet connection second router ip--

View 4 Replies View Related

Linksys Wireless Router :: Wake On LAN WRT610N Settings?

Oct 22, 2011

how to set up my router settings/port forwarding to be able to use Wake on Lan with Depicus here is what I currently have:DHCP Reservation with the IP Address of my computer ( and the MAC address xx:xx:xx:xx that I retrieved by doing ipconfig /all in the cmdMy Router address is and the submnet mask is DDNS service is disabledIn the Security tab, I unchecked Filter anonymous internet requestsIn Applications and Gaming, under single port forwarding, I have port 7 to 7, Both TCP and UDP, forwarded to the IP address of my computer and it is enabledMy network card is configured already, enabling WOL in the card's properties.Now when I use Depicus, I enter the MAC, my external IP address which I got from, subnet mask I use, I select Internet, and then the remote port I use is 7,Doing that, nothing happens at all. however, I can easily wake up my computer if I am connected to the same local network at home.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N Not Accepting Web Connections?

Nov 4, 2012

Firmware Version: 2.00.01 build 15  Sep. 13, 2010
Firmware Verification:  dcf86b5724049cb145f571a4bc21a17d.

I was able to connect using Gnome Epiphay Web Browser v 3.4.1 and found no problems on the WRT610N router.So-o-o Cisco, what do you recommend I do, seeing as how there is no later firmware to apply and nothing to configure that I can see.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved