I need to hook two wireless routers togetner. I want to use the E4200 as the primary and the WRT54GS as a bridge or 2nd access point to the same network. I have the WRT54GS firmware upgraded to the latest dd-WRT firmware with WDS enabled.
View 1 Replies
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
I'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\
View 3 Replies View RelatedI had to install a new modem for my Hughes Net satellite dish, and now my wireless laptop isn't connected to the router, meaning I can get online with it anymore.
View 2 Replies View RelatedI have read about pluggingthe WRT54GS into the E4200 to go back to the distance of the old WRT54GS. I get no distance out of the E4200 with RE1000 extender.
View 2 Replies View Relatedi have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
View 3 Replies View RelatedI have a WRT54GS router. Desktop works fine and the laptop wireless connection worked fine until recently. Now I cannot connect to the router with the laptop. At times I can get to the access point, but can't get to the internet. But for the most part I cannot connect to the router at all.
View 4 Replies View RelatedI have a wrt54gs linsys router with speedbooster. I bought my son a tablet for xmas. I cannot connect the tablet to the network. It finds my network, searches for an IP address, and then disconnects. It will connect for about 2 seconds, and then shows disconnected. My PC's, and WII work fine, although getting the WII ad netflix to reconnect after a power outage is like rocket science requiring field support every time. My tablet wont stay connected, and the book tells me that the router must accept 802.11b/g, and that if it has 802.11n, then it needs to be reconfigured to accept 802.11b/g.
View 2 Replies View RelatedI have a few devices I cannot connect to my router or modem but my ps3 and 2 xboxes are connected. I have easy link and I try to add devices to it but it doesn't show me the same options it did before when I added my ps3, and ipod. Now I can't connect my psp or any phone to it, I have the WRT54GS v7.2, those are my only problems with the router nothing.
View 3 Replies View RelatedI would like to connect a WRT54GS to a Netgear FVS318 router to proivde wireless access to my network. My current setup has my DSL modem connected to the FVS318 to provide my network computer with wired internet access. Can I simply connect the WRT54GS to the FVS318 using the LAN port? I've read other threads that mentioned changing the WRT ip address to 192.168.0.150 and disabling DHCP. i've don'e both, but I still don't get wireless access. My wireless devices can connect, but they don't have internet access. I have some questions below:
1. In the WRT setup, what do I use for the Internet connection type? Since my Netgear has that information already, do I need to put anything here?
2. In Setup -> Advanced Routing, do I neet to change the operating mode to Router?
3. Any other configuration changes that I need to do?
My WRT54GS worked perfectly till 3days .. everything works perfectly it just that i cannot get connection to itunes store neither over wifi or on my pc .. when i disconnected my router and connect my pc directly to the modem .
View 1 Replies View RelatedI have a cable internet connected to Linksys WRT54GS (ver 7.2) as my main router. I have a spare TP link TD-W8960N and was thinking to use it as a wireless bridge through WDS.
View 2 Replies View RelatedI intend to connect a network built around the WRT54GS to Internet by passing through a second network who is already connected to Internet through the Orange Livebox-2 (French).I have a traditional home network with basic shares on the French Orange Livebox-2 and its WiFi.The computers runs XP - Pro .My ADSL access is normally through the Livebox-2 (Range of addresses 192.168.1.xxx) and I run DHCP Working Group "WORKGROUP".It works without problem (Internet and VoIP telephony) except the Wifi of the Livebox which is known as poor (range and stability).I also manages a small "pedagogical workshop" for the school who visit my mill.This network is available to my young visitors based on a (tower) server containing the libraries and teaching materials and its printer. It’s XP - Pro machine. and to allow a maximum of two laptops be WiFi connected.The second network is built around the Linksys router (wich integrates no modem, simply a router).The WRT54GS router (rev 6) whose firmware is original Linksys up to date.I am setting the two Wi-Fi (Livebox 6 Cnl) and Cnl 4 on WRT54GS and different keys (this is manageable without difficulty).It has its server DHCP and Wi-Fi to connect their machine.What about the name of this second network group ? Currently “WORKGROUP” as well.I am setting a range different on the router WRT54GS (192.168.2.xxx) and enabled the DHCP.This "educational" network works perfectly when alone and separated from the "home" network and doesn’t get connected to Internet…I want to connect this router Linksys WRT54GS rev6 cascading through the Livebox-2. Share Internet via the Livebox-2 access.What about functionality?What is the connection to setup ?Should it be simple physical connection with a cable between the yellow ethernet port "2" of the Liveboxbox and the "Internet" connector of the Linksys router? Is this a good track to explore? I have searched extensively on the Internet but found proposals who are very old and refer to old Livebox... I did test and is not satisfactory...
View 1 Replies View RelatedI connected my router to a new computer. The computer is connected to the Internet.My SmartPhone won't connect via the router.
I logged in to the router from my cell and entered the password.The cell says the following over and over without connecting: ScanningObtaining IP address from routerDisconnectedConnectingScanning ... over & overHow can I connect my Samsung GAlaxy SII Skyrocket to my WiFi router [WRT54GS]?
I've recently been gifted with a WRT54GS v.2 which came from a family member who upgraded their wireless router and therefore passed this one along to me. It was working perfectly for them, but not me.
I've tried using the setup CD and doing a manual setup, but no internet connection is detected. I must confess to being a total wireless router newbie, this is my first one, so I am stumped as what to do next. I've looked at the FAQ's and through the forum as well, but I just don't know what might apply to my situation and as I am not very well versed in the terminology, I tend to get lost.
I just installed an E1200 router and used the CD to take care of the software work. I Cannot connect to it by WiFi. I still have to use a cable connection.
View 4 Replies View RelatedI have a WRT54G2 router with a desktop wired to it. The desktop is mine and my roommate wirelessly connects with her laptop and has been doing so no problem for about 6 months (ever since we got the router). On Christmas Eve, she was connected, went out, came home and found she'd lost her wireless connection. Now she can't get it back.I can still get online on the desktop.i've power cycled to no avail. What is weird is sometimes she will click on the list of available networks (so she can choose which she wants to connect to) and mine WILL be there, other times it will NOT. If she does happen to catch it at a moment when my network is there, and she tries to connect using the passphrase, it says "Trying to connect" or something to that effect, for like 3 minutes and then nothing happens. Also, not that I would need to, but if I go to "connect to" on my PC (as if I were looking to choose a network to connect to), my network name doesn't always show. It is random. Sometimes it does not even show when I go to "Networks" on my desktop.
View 9 Replies View RelatedI have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies View RelatedIm running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
View 2 Replies View RelatedI have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
View 6 Replies View RelatedA couple nights ago, my wireless router (Linksys BEFW11S4 ver4) just stopped letting me connect to the internet. All the lights were still flashing as they should, I could still go to the setup page, I just could not connect to the internet, both through wired and wireless. I could connect straight through the modem though.
So I decided that since the router was probably over a decade old that maybe it was just its time, and I bought a new one (E1000). I connected it, and still could not connect to the internet. I then did some internet searching and found this [URL] and I followed what was mentioned in post 10 (MAC address clone and changing local IP). Now I can connect through the wired connection and I rejoiced thinking I solved it.
Then I checked my laptop and it won't even connect to the router. It sees the router, but when I ask it to connect, it just says it can't. I decided I was too exhausted to try searching and fixing it on my own and if I tried I'd just end up breaking something out of frustration.
Does the EA4500 offer b/g wireless or not. My wireless camera is b. Cannot get it to connect to the ea4500 wirelessly.
View 1 Replies View RelatedI have a WRT160NV2 connected to Internet through cable and wanted to connect it wirelessly to a WRT120N that is far from it in order to expand its signal. Is it possible to do it wirelessly or the only solution is to connect them with cable?
View 1 Replies View RelatedI have a hard wired connection thought my cable modem, but can not get it thought my WRT160N v2
View 2 Replies View RelatedI have two E1200 routers, one of which I purchased last night. My table and netbook are only connecting wirelessly at 65Mbps max. These same devices connect to a WRT120N router at 150Mbps though.
I have the settings on the E1200 the same as the WRT120N.
So why is the the E1200 only connecting at 65Mbps then? Changing channels and MTU and beacons has no positive effect.
I can not get this to work.I have 1 EuroDocsis modem and 2x 1130AG wireless things.How do I manage to get this connected to each other wirelessly?The internet is allready configured at the EuroDocsis modem and I now want to distribute it wirelessly to both 1130AG's. The EuroDocsis is using WPA2 PSK.
View 3 Replies View RelatedI just installed an E3200 to replace my old Linksys. All my Nooks, IPADs, laptops and desktops are connecting wirelessly fine. However, I have 2 Wi Fi Radios that will pick up the network but will not connect and go into a network connect time out. One of the radios also has a hardwired connection and that is working fine. I have checked and double checked the network name, WPA key, etc. Of course I have reset all the radios and reenter new data many times, both manually and auto.
View 3 Replies View Relatedrecently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
View 2 Replies View RelatedI have a WRT610 and am unable to connect any devices wirelessly. All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong? The router has worked for about a year flawlessly and last night all wireless connections quit.
View 9 Replies View RelatedI just bought an E3000 router. The Setup that comes in the CD does not support OSX 10.7.2 which is the latest version of the operating system.Is there some way to connect it wirelessly to a MacBook running 10.7.2?
View 3 Replies View RelatedI had the router working fine then last night for some reason it dropped 2-3 (all of them currently on) internet, while online.I can connect wireless just fine to the router but get no internet, when i plugged into the router directly i still go internet, but when i connect the modem directly into the laptop i get internet so it is not the modem. I have tried to reboot the router and modem to no avail.i can access the routers page wirelessly and change stuff but just don't get any internet and the signal strength is excellent.
View 1 Replies View RelatedI just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies View Related
