Linksys Wireless Router :: E2500 Can't Connect All Devices

May 3, 2012

can't connect all my devices like an Iphone, Nook or another computed to the wireless network with the e2500, we have three devices but the others can't connect.

View 3 Replies


Linksys Wireless Router :: E2500 What Devices Are Connected

Feb 13, 2012

So i just set up the Linksys E2500 and it shoes 8 devices connected to my router. How I can see what devices are connected?

View 1 Replies View Related

Linksys Wireless Router :: Difficulties Connecting To E2500 With Some Devices

Jan 9, 2012

Just replaced a long-serving WRT54GS with an E2500 to gain a single feature… DHCP reservations for a bunch of web cams around my home. So far, the owner/user-experience with the 2500 has not been as positive as it was for the 54 or any of it's predecessors here and at my business. They just worked when you set them up, and once set up, they stayed set up. Zero futzing around with details. Some issues I'm seeking more expert input on:
My Panasonic Viera DVD/blueray player can access the web. Worked fine on the 54… access "Network" and 50% of the time it would join the network then and the other 50% of the time, you had to try a second time which I presume was the time it took for the device to gain access to the network. With the 2500, you can't ever (so far) get on by selecting "Network"… you have to go into the sub menu and have it dwell in the Network menu where it appears to make an ongoing effort to get onto the network. About 30% of the time, you get on… the other 70% no joy.My HP wireless printer will join the network if you dive into its menu system and tell it to look for the network. However, sitting at any of the computers on the network, you can't "get the printer's attention"… it just doesn't join and the print fails. You go over and use the printer's menu manually to get it on and it stays on for a short time, but it soon quits and that's the ball game.My Google Nexus One phone is a slightly different experience… it goes off the network as soon as you shut the screen down but, it seems like it comes back when you turn it on. With the 54, it seemingly remained in touch with the network better… things came in over the net while it was in my pocket. So, works better than the other two but I don't see why it goes away when on the 54 router, it didn't seem to. 

In case it matters, this system is set up with DHCP, WPA2/personal and MAC filtering as was the case on the router(s) it is replacing. UPnP has been disabled. On 1.0.03 of the firmware. There are 6 DHCP reservations which also receive port forwards. I have adjusted the Beacon Interval, Frag threshold and RTS threshold for both frequencies and the MTU, all in accordance with recommendations under the support area for this site. Since everything worked well for both the 54 and its predecessor, I have to believe it's the 2500 that's the problem.

View 3 Replies View Related

Linksys Wireless Router :: E2500 - Cannot Connect With Hp Laptop

Jul 31, 2011

I install the E2500 router with my modem. it works fine with other compaq desktop and gateway laptop. But the HP Pavilion dv6910 can not get online. I try my hp laptop at starbuck shop, and it work fine.

View 3 Replies View Related

Linksys Wireless Router :: Can't Connect With Modem Through E2500

May 9, 2012

I have an old Speedstream 5100 modem hooked to my e2500 router. Everything works well except if for some reason my modem disconnects from ISP I can not log into it through the route to reconnect it. I must plug a direct cable into modem from computer run connect script then plug modem back into router all is fine again.
why connecting to modem through router is blocked?

View 9 Replies View Related

Linksys Wireless Router :: Connect WAP54G To New E2500?

Jan 19, 2012

Is it possible to connect my WAP54G to my new E2500 router?
I previously had a WRT54G and had my WAP54G connected to it in AP Client mode.  This enabled me to have internet access on my desktop computer that is located in another room downstairs.

View 2 Replies View Related

Linksys Wireless Router :: E2500 Won't Connect To Internet?

Aug 1, 2012

I installed an e2500 to my cable modem and everything went perfect. Then 2 weeks later the electricity went off for some power company upgrades. when the power came back on the modem wouldnt connect. I have been through every solution in the cisco articles. The computer connects when directly wired to the modem, so I know there is signal. When I place the router into service and use the ethernet connection  the modem no longer displays the active internet led. The e2500 ethernet led to the computer lights and the power led. The Ethernet led from the modem to the router doesn't light. I did a complete reset on the router. The setup software only runs to 75% complete then stops and tells me to check the plugs. Ive checked, replaced and swapped the cables. I've set the MAC to clone, and verified the MAC address via ipconfig. Ive done the complete powercycle at least 20 times.

View 3 Replies View Related

Linksys Wireless Router :: E2500 Cannot Connect To 360 Using 5ghz

Jun 27, 2012

I've found a few people with this problem on the internet.  I'm using my phat 360 with the black N adapter.  e2500 is updated to the latest firmware.  But my 360 cannot connect to the 5ghz N, only 2.4ghz g.  The wierd thing is that the 5ghz signal gives a better signal than the 2.4ghz.
I just found a thread on google talking about the e4200 and someone mentioned counterfit  adapters and problems with them.  I did buy this on ebay for a cheap price, so it looks like it was too good to be true.  this is a counterfit? It does have a real hologram on it.


If this is real, what else could be the problem.  Has the firmware not been updated to support the 360?

View 6 Replies View Related

Linksys Wireless Router :: E2500 Won't Connect To IPad?

May 14, 2013

What should i do ?   Reset  ?  How  ? maybee i did not  set the cable properly  ( what is an ethernet cable ? )  the one i have is a short cable with what looks like telephone jacks at either ends.  one end is plugged in my comcast modem and the other into my mini mac.

View 1 Replies View Related

Linksys Wireless Router :: E2500 - How To Connect A Sling Box

Dec 21, 2012

How do I connect a sling box to this router/

View 1 Replies View Related

Linksys Wireless Router :: Connect E2500 And Netgear DG834G V5?

Jul 4, 2012

I just bought an E2500 router. I have until now been using a Netgear DG834G v5.
I have tried multiple times but my success has been limited. I turned off DHCP in the Netgear, set the isp login question to no, and set it into bridge mode. I managed to use Cisco Connect to connect the Netgear and the E2500, but there was no internet.
I logged into the E2500 and entered by ISP details in the PPPOE section. I went to status and clicked connect, but a message would eventually pop up saying that an IP address could not be found. In the Netgear I could set up VPI and VCI etc manually, but can't find those settings in the E2500. My ISP also requires a dynamic IP - does this mean that DHCP must be off in both the Netgear and the E2500?
 I factory reset the E2500 and tried Cisco Connect again, but it said that it couldn't find the device.

View 1 Replies View Related

Linksys Wireless Router :: E2500 Cannot Connect To Setup Page

Apr 21, 2012

I can't connect to my setup page [url]... I get to the page that says..."There is a problem with this website's security certificate." Then I click the "continue to this website (not recommended). After this it will not connect 
Tried with IE9 and Firefox 11
Firefox says "The connection to the server was reset while the page was loading."
Internet still works. PC is connected directly to router. Tried different port on router. Tried installing CiscoConnect.E2500.1.4.11299.0,0, but it fails saying there is no router connected to PC. Like I said I am on the PC now, wired to router and have internet access via cable modem connected to router. I can see my ireless printer on the network also..

View 2 Replies View Related

Linksys Wireless Router :: E2500 - Unable To Connect With Internet?

Dec 23, 2011

Ok group here's the issue. I have a E2500 router with a wired connection for my sons xbox and 2 laptops connected to it. The laptop I used to set-up the system will usually connect to the router but not allow me through to the internet then after a shutdown and repowering it connects. what to check? The othhitch. Both arer laptop connects without a e running vista home.

View 2 Replies View Related

Linksys Wireless Router :: E2500 - Can't Connect To External Network

Jan 2, 2012

Switched from a Netgear router to a Cisco E2500 and now my Samsung blue ray won't connect to internet.
It says physical connection established but can't connect to external network.

View 2 Replies View Related

Linksys Wireless Router :: Iphone 4s Won't Connect To Wifi E2500

Apr 24, 2012

When I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into server and PC laptop, iMac laptop and former iPhone 3 all connected to wifi w/o difficulty.) Went to site of purchase (12/2011) of Lynksys E2500. They suggested might need to download a to locate and install updates to driver for E2500 to allow connection to iPhone 4S?

View 2 Replies View Related

Linksys Wireless Router :: E2500 Can't Connect To Continue Configuration

Sep 17, 2011

I have a Cisco e2500 and I want to extend my network by connecting my old Linkysys G router to it.  There are plenty of instructions on the net, and I get all the up to providing a new IP to the second (old) router.  As soon as I give it a new IP, I can't connect to it to continue the configuration!For instance, when I change the IP from 192. 168. 1.1 to on the second router, I cant get my browser to hit it and open and admin page.  I tried a bunch of values in the last part of the IP, and none work.

View 1 Replies View Related

Linksys Wireless Router :: E2500 As An Additional Access Point Will Not Connect

Oct 16, 2012

I have AT&T Uverse which provides Internet for my home.  The wireless capability of this router is pretty bad, I don't get good/reliable wireless reception upstairs in my office.  The solution was to buy a Cisco E2500 and add it as an access point upstairs.
I have the E2500 LAN port connected to the LAN port of my uverse router downstairs.  DHCP is turned off on the E2500.  I have my office PC wired into the E2500.  The home PC works fine, its getting DHCP from the uverse router downstairs and connects and good speeds.  The problem comes with my wireless devices trying to connect to the E2500. 
I should mention that yesterday when i bought this, all worked fine.  This morning when I came into my office none of the wireless devices would connect to the E2500 at all.   But as soon as I remove the cable that connects the E2500 to the uverse router downstairs they will connect via wireless but of course not get an IP address since that is disabled.
I have factory reset the E2500 and uverse router several times and am getting no where. what could be causing the wireless devices to not connect at all?

View 8 Replies View Related

Linksys Wireless Router :: EA3500 Why Some Devices Won't Connect

Mar 30, 2013

Just installed a Linksys N750 (EA3500) router (WAN - LAN setup). I settled both band networks : 2.4 Ghz and 5Ghz with different SSID and different WAP2/WAP personal mixt.  WHile some devices will show both networks correctly, I'm facing issues with the 5Ghz band and wonder if this is sigh of some kind of failure:
- while my iPad offered both signals and let me set the 5 Ghz band, it is showing weak signal and stall on loading webpages; as soon as I instead put it on the 2.4Ghz band, (standing at same location of course), everything runs smoothly, excellent signal. 
- I have a Mac Mini and PS3 side by side same location.  The Mac Mini seems to works flawlessly under both bands, 2.4 or 5  - excellent signal. However, the PS3 fails its connexion test and states that signal is not perceptible on the 5Ghz. But connect as a snap on the 2.4 Ghz band.
- Got on and off 5Ghz signal on a laptop; connected to 2.4Ghz, everything runs perfect.
- iPhones 4S : I don't even see the 5Ghz SSID, but I get both the 2.4 and Guess account..So I'm tempted to conclude that some devices just can't follow the pace (??) to connect on 5Ghz..

View 4 Replies View Related

Linksys Wireless Router :: 802.11b Devices Won't Connect To WRT160N V3

Aug 14, 2011

I've been using a WRT160N for a couple of years now with no problems with any of my devices. I have a couple of certain devices (a DS and a PSP mainly) that utilize 802.11b and have been working perfectly up until now.
All of a sudden it seems like the router has decided all by itself to no longer allow 802.11b devices to connect to it, despite it being configured in mixed mode. (b/g/N) I've tried tinkering around with it, switching between Mixed and BG-Mixed, changing the channel to something more common and restarting the router, but I can't connect at all on these devices.Model: Cisco Linksys WRT160N v3.Firmware version: 3.0.03.

View 1 Replies View Related

Linksys Wireless Router :: WRT320N - Devices Only Connect At 54mbps?

Feb 24, 2012

I just installed a WRT320N for someone's home network, with the intent of providing better speed for network printing.
Unfortunately, all four of his n-capable Windows computers will only connect at 54mbps. Four different computers (Win7, Vista, XP), each with a different brand/model of n-capable network adapter.
I suppose I could try setting the wireless to n-only instead of "mixed". However, he's got a couple g-only devices as well, so that wouldn't work.
I tried updating the firmware to latest/greatest - no effect.

View 5 Replies View Related

Linksys Wireless Router :: WRT45G - Connect Two Devices On The Same Network?

Sep 15, 2011

I was requested to connect 2 WRT54G devices in our network with same ip range.

View 2 Replies View Related

Linksys Wireless Router :: E3200 Can Connect Other Computers But Not IOS Devices

Dec 2, 2012

Just installed the E3200. Can connect other computers but not IOS devices to the router, except through the "guest" port.

View 2 Replies View Related

Linksys Wireless Router :: EA4500 - Unable To Connect Any New Devices?

Sep 28, 2011

I have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly.  New laptops, PS3, friends laptops.  Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N - Devices Unable To Connect

Jul 28, 2012

We have Cable DSL modem that connects to router.  One wired connection from router to PC.  Wireless devices are 2 iphones 2 ipads and 2 imacs.  Constantly having to power the WRT120N off and back on to regain connectivity.  

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect Wifi Devices To Ea6500

Mar 19, 2013

To preface this message I need to state that I am functionally illiterate when it comes to any kind of networking. I just replaced an old Linksys wireless-G router with a new Linksys EA6500 router.  My needs are as follows: I am connecting 4 desktop computers (two personal and two business) via Ethernet cables.  In addition there will be three smart phones, two DVD players and one game console connected wirelessly.  In the future I will add a printer, hard drive and more wireless devices.  After installing the hardware and running the setup disk all four computers wired with Ethernet cables worked fine (although they are not set up to communicate or share files with one another - they only need to access the internet.  My problem is with the wireless connectivity.  I cannot get any one of the wireless devices to work.

View 3 Replies View Related

Linksys Wireless Router :: E3200 / Possible To Use As USB Hub And Connect Multiple Devices?

Jul 21, 2012

I just bought the E3200 and have it all set up and have been able to successfully print from the USB port. I want to know if you can use a USB hub to connect multiple devices to the router. I found a couple of similar questions on the forum, but they're all back in 2011 before the 1.4 update to Cisco Connect. 

View 1 Replies View Related

Linksys Wireless Router :: Wrt54gl V1.1 Can't Connect With Wifi Devices

Jun 19, 2011

I have my pc connected to the router with a cable. As soon as I switch it on I can't connect with any of my wireless devices like my laptop, tablet, mobile phone. As soon as I switch off the computer it works fine with all devices.
Is this a setting where the cable connected pc gets preference that I could switch off?

View 9 Replies View Related

Linksys Wireless Router :: E3200 Couldn't Connect Via Wi-Fi Devices

Feb 9, 2012

I bought the E3200 to replace an older Linksys model. The older model worked but the signal was weak throughout the house. I installed the e3200 using the Cisco connect software but it told me that it wasn't sure I was connected to the internet. I wasn't. Showed a strong signal but could not connect via wireless devices or from the cable from  the router to the desktop.
I have LUS Fiber service which does not use a modem. I have had them recycle the signal several times and have done tried many different variations of the MAC numbers from ipconfig or from cloning. Have also tried it with the MAC cloning disabled so the router's MAC number is used. I have reset, rebooted and done just about every possible option.
 Spoke with my provider many times and they insist they are sending me a signal. They also recognized the router's MAC number on their end.I purchased one router and it wouldn't connect, so I exchanged it. All these shenanigans I have gone through are with the second router because I figured the hardware isn't the problem.

View 1 Replies View Related

Linksys Wireless Router :: Wrt120n Can Only Connect Desktop To Wifi No Other Devices

Dec 26, 2012

I just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works.  Cannot get other devices to use the wifi (iphone, ipod, android phone...).  I am at a loss.  Saw some suggestions about disabling a Upn or something under the router's LAN properties

View 1 Replies View Related

Linksys Wireless Router :: WRT610N - Unable To Connect New Devices To Network

Jan 3, 2012

I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.

View 5 Replies View Related

Linksys Wireless Router :: WRT54g Can't Get Devices To Connect To Access Point

Oct 22, 2011

I have a WRT54g with Tomato firmware. I am trying to set up a WAP54g to extend the range but while that access point does show up as a network, nothing can connect to it. I already have the router's MAC address put in the WAP. I think the problem is that I have Tomato on the router and that conflicts with the default firmware on the WAP. Range isn't really the problem, I just need to strengthen the signal in a specific area that it's not getting to because of walls. I can't even switch to previous versions of Tomato anymore. I may have just bricked it.Some facts about my setup-My modem has default settings: PPPoE connection with a DHCP server enabled.-I set the router to use DHCP and put it in "Access Point" mode.

-The WAP is set to repeater mode and it was set to Static IP configuration by default. I simply followed the instructsions here: url....

-There are three different MAC addresses: The WAN, LAN/router, and the Wireless. I put the Wireless MAC address in the access point. Is that correct? 

-My desktop is wired directly to the router and it has a static IP outside the router DHCP's IP range-UPnP is enabled by default in the modem and router, but I'd like to try to get this working rather than buy all new equipment.

View 7 Replies View Related

Linksys Wireless Router :: WRT610 Unable To Connect To Devices Wirelessly

Nov 29, 2011

I have a WRT610 and am unable to connect any devices wirelessly.  All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong?  The router has worked for about a year flawlessly and last night all wireless connections quit.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 - Visibility Of Devices In Cisco Connect Cloud

Mar 26, 2013

I have EA4500 router with latest firmware update. Cisco Connect Cloud behave strange. Some devices connected to the wireless router appear in CCC and some not. For instance, Iphone is visible, Ipad is not but both have normal accesss to internet.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved